Staff Directory


Zuraida Bt. Ahmad

Academic Qualification

  • Doctor of Philosophy - Doctor of Philosophy, International Islamic University Malaysia
  • Master of Science - Masters Degree, The Victoria University of Manchester
  • Bachelor of Engineering in Material Engineering - Bachelor Degree, Universiti Sains Malaysia (USM)

Zuraida Bt. Ahmad (Prof. Ir. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


zuraidaa@iium.edu.my
4556


Expert Profile


Prof. Ir. Dr. Zuraida Ahmad, a graduate of University Science Malaysia (USM), Pulau Pinang started her career as a research assistant in Ceramics Technology Laboratory, SIRIM, Shah Alam in 1992 before being offered a scholarship to further her study under Skim Latihan Anggota Baru (SLAB) by SIRIM in the same year to UMIST, Manchester.
She was appointed as a Research Officer after she came back and two years later, in 1995, she was promoted to executive researcher in the same organization. Here, she handled some of the commercialized projects as Jitra Pot Water Filter, Halal Bone China Products and Lightweight Clay Aggregates. In 1999, she opted to serve International Islamic University Malaysia (IIUM), as a lecturer and later completed her Ph.D in Materials Engineering in the same University.
Upon graduation, she was offered the post of Assistant Professor and held the administrative post as an Executive Officer for Training Programme in Advanced Engineering and Innovation Centre (AEIC) before holding the Post of Deputy Dean, Student Affair in Kulliyyah of Engineering, from 2008 to 2012. Currently, she isĀ  Professor in Manufacturing and Materials Engineering Department, Kulliyyah of Engineering, IIUM.


Area of Specialisation


  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Nano Materials - Nanoclay composites
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Ceramics - Porcelain, Bonechina, Ceramic water filter and ceramic artificial bone (hydroxy apetite)
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Lightweight Concrete - Lightweight clay concrete, Lightweight natural fiber concrete
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Composite Materials - Filament winding, hands lay-up and compression moulding for both natural and synthetic fibers composites
  • Natural Science ~ Material Sciences ~ Polymeric Materials ~ Biopolymers - Starch-based polymers
  • Natural Science ~ Material Sciences ~ Polymeric Materials ~ Polymer Composites - Thermoplastic and biodegradable composites


Professional Membership


  • 1994: Member of Profesional Body / Association, Member in Malaysia Association of Solid State (MASS 130)
  • 1999: Member of Profesional Body / Association, Board of Engineers Malaysia (BEM-30598A)
  • 2007: Member of Profesional Body / Association, Institute of Materials Malaysia (Professional Member - 3291)
  • 2009: Member of Profesional Body / Association, Malaysian Society for Engineering and Technology (mSET-00371)
  • 2010: Member of Profesional Body / Association, Institute of Engineers Malaysia (44106)
  • 2010: Member of Profesional Body / Association, Persatuan Industri Komposit


Teaching Responsibilities


ADVANCED MATERIALS CHARACTERIZATION 2012/2013 2007/2008
ADVANCED MATERIALS SCIENCE 2015/2016
Contemporary Materials for Engineering Applications 2023/2024 2022/2023 2021/2022 2020/2021 2018/2019 2017/2018 2015/2016
ENGINEERING CONCEPTUAL DESIGN 2023/2024 2022/2023
ENGINEERING ETHICS FROM ISLAMIC PERSPECTIVE 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
ENGINEERING ETHICS SAFETY AND ENVIRONMENT 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016
ENGINEERING ETHICS, SAFETY AND ENVIRONMENT 2023/2024
ENGINEERING MATERIALS 2012/2013 2008/2009 2007/2008 2006/2007 2005/2006
FAILURE ANALYSIS OF MATERIALS 2012/2013
FINAL YEAR PROJECT I 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
FUNDAMENTAL OF MATERIALS SCIENCE AND ENGINEERING 2023/2024 2022/2023 2021/2022
FUNDAMENTALS OF MATERIALS ENGINEERING 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
FUNDEMENTAL OF MATERIALS SCIENCE AND ENGINEERING 2021/2022
INTEGRATED DESIGN PROJECT 2023/2024 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
INTEGRATION OF KNOWLEDGE & CREATIVITY IN ISLAMIC PERSPECTIVE 2022/2023
INTERGRATED DESIGN PROJECT 2023/2024 2022/2023
ISLAMIZATION OF ENGINEERING STUDIES 2021/2022 2020/2021
MATERIALS CHARACTERIZATION 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
MATERIALS LABORATORY 2007/2008 2006/2007
MATERIALS SCIENCE AND ENGINEERING 2012/2013
MECHANICS OF MATERIALS (LAB) 2004/2005
METALLIC MATERIALS 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
SEMINAR 2023/2024 2022/2023 2021/2022 2020/2021 2005/2006
SEMINAR I 2009/2010
THE INTEGRATION OF KNOWLEDGE IN ENGINEERING: AN ISLAMIC PERSPECTIVE 2023/2024
USRAH IN ACTION 1 2022/2023 2021/2022
USRAH IN ACTION 2 2022/2023
WORKSHOP TECHNOLOGY 2006/2007 2005/2006 2004/2005


Supervision


Inkjet Printed Poly(3,4-Etylenedioxythiophene): Poly(Styrenesulfonate) (Pedot:Pss) Doped Silver Nanoparticle (Snp) On Textile.
Ph.D Completed 2023 Main Supervisor
Development Of A Framework For Sustainable Product Design.
Ph.D Completed 2020 Main Supervisor
Characterization, Properties And Degradation Of Hot-Pressed Fabricated Rattan Waste Binderless Board.
Ph.D Completed 2019 Main Supervisor
Development Of Tic / Nip Hbn Composite Coating For High-Temperature Tribological Applications.
Ph.D Completed 2017 Main Supervisor
Development Of Porous Alumina-Hydroxyapatite Composite Using Protein Foaming-Consolidation Method For Biomedical Applications.
Ph.D Completed 2012 Co-supervisor
Tribology Of Kenaf/Carbon Fiber Reinforced Epoxy Hybrid Composites.
Ph.D In Progress Co-supervisor
The Effects Of Glycerol And Sorbitol Plasticizers On The Biodegradable Food Packaging Film From Sago Starch.
Master Completed 2021 Main Supervisor
Modified Halloysite Nanotubes As Carrier For Antimicrobials Agent In Wound Healing Materials.
Master Completed 2021 Main Supervisor
Sago Starch Hydrogel Prepared Through Gamma Irradiation And Impregnated With Silver Nanoparticles.
Master Completed 2016 Main Supervisor
The Development Of Biodegradable Superabsorbent Polymer Hydrogel From Sago Starch.
Master Completed 2015 Main Supervisor
The Development Of Sago Starch/Kenaf Fiber Biocomposite Films.
Master Completed 2015 Main Supervisor
Kenaf Core Sandwich Structure Composites Toughened With Modified Epoxy.
Master Completed 2015 Co-supervisor
Performance Evaluation Of Kenaf-Epoxy Core Sandwich Structure Via Modelling And Simulation.
Master Completed 2014 Main Supervisor
Porous Tricalcium Phosphate (Tcp) Produced Using Polyurethane Foam As Template For Artificial Bone Graft Application.
Master Completed 2012 Main Supervisor
Environmental Factors Effect On Cotton-Albumen Composite.
Master Completed 2012 Co-supervisor
Development Of Bio-Based Composites From Cotton Fiber Reinforced Albumen.
Master Completed 2011 Main Supervisor
Development Of Strontium Doped Hydroxyapatite Porous Bodies For Bone Implant Application.
Master Completed 2011 Main Supervisor
Development Of Lightweight Cement-Albumen Concrete.
Master Completed 2010 Main Supervisor
Development Of Radiation Hardened Graphene Field Effect Transistor With Passivation Layer Under High Energy Electron.
Master In Progress Co-supervisor
Bioactive High Amylose Mangifera Indica Starch/Polycaprolactone Electrospun Nanofibers For Biodegradable Facemask Applications.
Master In Progress Co-supervisor


Research Projects


Completed
2022 - 2023 Belajar dan berinovasi bersama konsep 3C (Cakna, Cipta dan Cartakan) untuk pembangunan kelestarian Setempat (Gombak Utara)
2022 - 2022 'Taman Permainan Hijau Selangor" or "Selangor Green Playground"
2021 - 2024 Medical Grade Product from Clay for Cleansing of Wound and Surgical Instruments in the SERTU Procedures
2020 - 2023 Reliability Evaluation of the ZTA Doped Nano TiO2 and Cr2O3 Ceramic Cutting Tools for High Speed Turning Process of Metal
2018 - 2023 Poly (3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS) doped Silver Nano Particle (SNP)conductive polymer film for pressure ulcer prevention
2018 - 2023 Investigation On the Effectiveness of Various 'Green' Batik Wax Blends Extruded via Fused Deposition Modeling (FDM).
2017 - 2020 Study On The Effect Of Cloisite 30B On The Antimicrobial Activities And Tissue Regeneration Of Starch Based Wound Healing Materials
2017 - 2020 Tribological Properties of Hybrid Composites based on Woven Carbon Fiber/Fine Kenaf Fabric Reinforced Epoxy Matrix for Automative Applications
2016 - 2018 Incorporating Qur'anic Terminology into Physics Textbook: Developing Ulu-Albab Thinking Mode in the Learning of Science
2016 - 2020 The Study of Tropical Fruit Seeds as New Sources of Starch Based Biopolymers for Green Composites Applications
2016 - 2019 Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2016 - 2019 Novel Tactile Sensory Surface Mat with Electrical Stimulation (SMES)for the Prevention of Pressure Ulcers due to Immobility
2014 - 2018 Fundamental Mechanism and Activation of Nanoadd Zirconia Toughened Alumina (ZTA) Cutting Insert via the Addition of Carbon Nanotube (CNT) for Machining Super Alloy Inconel 718
2013 - 2016 Characterisation and Dissolution Study of Novel Biodegradable Phosphate Based Glass for Biomedical Application
2013 - 2016 Development of High Wear Resistent Nano Add ZTA Ceramic Cutting Insert for High Speed Machining Application
2012 - 2015 Prototype Development of Biodegradable Sago Based Sanitary Products
2012 - 2014 Fabrication and Characterization of TiO2 Thin Films Electrode for Energy Generation
2012 - 2015 The Study of Biodegradable Metroxylon Rottb.(Sago)/Montmorillonite Nanoclay Superabsorbent Polymer (SAP)
2010 - 2013 The study of PVC/alumina trihydrate nanocomposites for fire retardant-structural materials
2010 - 2012 The development of the thermoplastic starch for biodegradable fabrics
2010 - 2013 Testing and evaluation of cassava starch as ceramic binder for investment casting
2009 - 2012 The Study of Superabsorbent Biodegradable Hydrogels Developed from Natural Polymer for Sanitary Products
2009 - 2017 Value Engineering - Link Up with Universities Program: Parts Distribution and Handover
2009 - 2011 The Effect of Electron Beam Radiation on Mechanical properties of HDPE/EPDM-Organo Montmorillonite Nanocomposites
2008 - 2011 Development of porous TricalciumOhosohate (TCP) by Using Egg Yolk as pore Creating Agent
2007 - 2011 Development of In-House Ceramic Cutting Tools
2006 - 2010 Formation of Surface Layer Coatings through Powder Preplacement and TIG Torch Melting Processes
2006 - 2009 Development of Environmental Friendly Super Bioadhesive For Structural Applications Using Egg Albumin As The Matrix Material
On-Going
2023 - Present Interfacial Mechanisms of Degradation in PEDOT:PSS-based Smart Fabrics for Long-Term Reliability
2022 - Present TEACHING MATERIALS PROJECT:- ENGINEERS AND THE SOCIETY
2022 - Present Filtration Mechanism of Bioactive High Amylose Mangifera Indica Starch/Polycaprolactone Electrospun Nanofibers for Biodegradable Facemask
2021 - Present Thermal degradation mechanism and surface behavior of CFRP composite during milling process
2021 - Present Self Healing Mechanism of Nitinol (Ni60Ti40) Enhanced Zirconia Toughened Alumina (ZTA) Ceramic Cutting Tools for High-Speed Machining
2018 - Present Development of self-healing nanocoating via polyelectrolyte assemblies for corrosion protection applications.
2015 - Present Investigation of Surface Degradation of Binderless Particleboards (BPB) by Utilizing Rattan Furniture Waste Material
2013 - Present Production of Multipurpose Enzymes From Cocoa pod Hisk, an Agro Waste By-Product, using Carrier Free Immobilization Technology
2013 - Present Grounding of the Education Model based on Branching of Islamic Knowledge into Engineering/Technical Education
2009 - Present Advanced Materials and Surface Engineering (AMSERU)


Award & Recognition


25 Mar, 2011 BEST TEACHER AWARD 2011 - International Islamic University Malaysia University


Publications


Article

2023 Tool wear and wear mechanism of WC-Co End Mill during milling of CFRP in sustainable cutting conditions. Materials Science Forum, 1109 () pp. 153-158
2022 Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing. Polimery, 67 (6) pp. 249-254
2021 A comparative study on the desiccant effect of polypropylene and polylactic acid composites reinforced with different lignocellulosic fibres. Journal of Applied Science and Engineering, 24 (2) pp. 223-231
2021 Aspirational ethics as a contributing factor in engineering students’ ethical awareness and behavior. IIUM Journal of Educational Studies, 9 (3) pp. 17-36
2021 Mechanisms for doped PEDOT:PSS electrical conductivity improvement. Materials Advances, 2 (22) pp. 7118-7138
2021 Modeling humanizing education through newly reviewed materials engineering curriculum. IIUM Journal of Education Studies, 9 (3) pp. 63-79
2020 Allium sativum as antimicrobial agent in Thermoplastic Sago Starch (TPSS) films for dermal wound healing. Test Engineering and Management, 83 (May-June) pp. 1014-1019
2020 Effects of halloysite nanotubes (HNT) structures on antimicrobial activity on TPSS Film. Malaysian Journal of Microscopy, 16 (2) pp. 119-127
2020 Effects of silver nanoparticles concentration on resistivity of PEDOT: PSS thin conductive films. Test Engineering and Management, 83 (May - June 2020) pp. 1008-1013
2020 Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research, 8 (2) pp. 355-361
2020 Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy, 16 (2) pp. 112-118
2020 Safer sanitary pads made from palm starch. Asia Research News, 6th May 2020 () pp.
2019 Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15 () pp. 49-61
2019 Mechanical properties of woven carbon fiber/kenaf fabric reinforced epoxy matrix hybrid composites. MALAYSIAN JOURNAL OF MICROSCOPY, 15 (1) pp. 10-16
2018 Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology, 13 (Issue Special Issue on WRICET (2016)) pp. 86-93
2018 Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1) pp. 185-196
2018 Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1) pp. 403-409
2018 Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology, 7 (4014) pp. 339-342
2017 Effects of pressing temperature and pressing time onto the properties of binderless particleboard made from rattan furniture waste. Journal of Built Environment, Technology And Engineering (JBETE), 3 () pp. 11-18
2017 Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science, 29 (4) pp. 485-492
2016 A review of natural fibers and processing operations for the production of binderless boards. BioResources, 11 (2) pp. 5600-5617
2016 Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences, 4 () pp. 18-25
2016 Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC), () pp. 6-13
2016 Optimization of natural fiber composite parameter using Taguchi approach . Advanced Materials Research, 1133 () pp. 185-188
2016 Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC), 4 () pp. 1-7
2015 Characterization and preparation of sago starch (SS) based reinforced with silver nanoparticle (SNP) . Advanced Materials Research, 1115 () pp. 369-372
2015 Characterization of rattan waste for binderless particleboard (BPB) production. Advanced Materials Research, 1115 () pp. 317-320
2015 Gamma irradiated starch based hydrogel impregnated with silver nanoparticle. Advanced Materials Research, 1115 () pp. 390-393
2015 Mechanical and physical properties of sago starch/halloysite nanocomposite film. Advanced Materials Research, 1115 () pp. 394-397
2015 Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research, 1115 () pp. 275-278
2015 Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM), 13 (2) pp. 11-13
2015 Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach . Advanced Materials Research, 1115 () pp. 238-242
2015 Study of mechanical and flammability properties of polypropylene/microcrystalline cellulose composites filled with nano-sized aluminium hydroxide (ATH) particles. Advanced Materials Research, 1115 () pp. 402-405
2015 Swelling properties of gamma irradiated starch based hydrogel dressing. International Journal of Innovative Science, Engineering & Technology, 2 (8) pp. 933-936
2015 Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research, 1115 () pp. 166-169
2015 The effect of black liquor on rattan waste binderless board (BPB) produced via digestion-hot pressing (DHP) process . ARPN Journal of Engineering and Applied Sciences, 10 (21) pp. 9753-9758
2014 Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology, 8 (3) pp. 792-796
2014 Effect of kenaf fibre on starch based biopolymer composite. Advances in Environmental Biology, 8 (3) pp. 765-769
2014 Evaluation of Kenaf Fibres Reinforced Starch Based Biocomposite Film through Water Absorption and Biodegradation Properties . Journal of Engineering Science, 10 () pp. 31-39
2014 Holly Qur'an: the key reference of materials. Science International Lahore, 26 (5) pp. 2033-2035
2014 Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals, 603 (1) pp. 180-193
2014 Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering, 53 () pp. 107-113
2014 Preparation and characterization of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites and their hybrid composites with halloysite clay. Advances in Environmental Biology, 8 (3) pp. 704-711
2014 Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals, 603 (1) pp. 173-179
2014 Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore, 26 (5) pp. 2569-2575
2013 Low Density Polyethylene (LDPE)/ Thermoplastic Sago Starch (TPSS) blend Filled Kenaf Core Fiber (KCF). Advanced Materials Research, 626 () pp. 1048-1053
2013 The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science , 24 (2) pp. 97-115
2013 The effects of initiator content on sago (metroxylon rottb.) starch-G-PAN hydrogel . Advanced Materials Research, 683 () pp. 218-221
2012 Effect of fiber loading on properties of thermoplastic sago starch/kenaf core fiber biocomposites. BioResources, 7 (3) pp. 4294-4306
2012 Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite . Journal of Thermoplastic Composite Materials, 25 (2) pp. 153-164
2012 Integrating and infusing of Islamic values in the existing engineering course subject: a case study. Advances in Natural and Applied Sciences, 6 (5) pp. 625-632
2012 Morphological study of Superabsorbent polymer hydrogels from sago starch. Advanced Materials Research, 576 () pp. 338-341
2012 Properties of montmorillonite-reinforced thermoplastic sago starch composites . Advanced Materials Research, 445 () pp. 469-474
2012 Properties of sago starch-nanoclay biocomposites film. Advanced Materials Research, 576 () pp. 480-483
2012 Rheological behavior and stability of cassava starch for ceramic mould binder application. Advanced Materials Research, 576 () pp. 162-165
2012 The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal, 19 (2) pp. 715-719
2012 The study of glycerol plasticized thermoplastic sago starch. Advanced Materials Research, 576 () pp. 289-292
2011 Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials, 471-72 () pp. 403-408
2011 Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials, 472-72 () pp. 928-932
2011 Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal, 12 (1) pp. 63-75
2011 Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research, 265 () pp. 760-764
2011 Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering, 42 () pp. 462-465
2011 Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials, 471 () pp. 781-785
2011 Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science, 1 (3) pp. 131-137
2011 Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers, 8 (1) pp. 14-26
2011 Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical properties. Asia-Pacific Journal of Chemical Engineering, 6 () pp. 863-869
2011 Properties of compression moulding starch-nanoclay biocomposites. World Journal of Engineering, 8 (Supp.1) pp. 1377-1378
2011 The effect of fiber content on cotton reinforced albumen composites . IIUM Engineering Journal, 12 (2) pp.
2011 The study of biodegradable thermoplastics sago starch. Key Engineering Materials, 471 () pp. 397-402
2011 Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal, 6 (1) pp. 51-57
2010 Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering, 8 () pp. 1-7
2008 Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research, 47 () pp. 1189-1192
2007 Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design, 28 () pp. 71-77
Conference or Workshop Item

2023 Enhancing engineering ethics understanding: impact of the teaching and learning approaches and curriculum. In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23),
2022 Implementing critical thinking methods in Engineering Curriculum. In: 5th International Conference on Engineering Professional Ethics and Education (ICEPEE'22),
2020 Low cost piezoresistive pressure sensor matrix for pressure ulcer prevention and management. In: 2019 7th International Conference on Mechatronics Engineering (ICOM) 2019,
2019 Electrical stimulation in combating pressure ulcer for immobilize subjects: a conceptual framework. In: International Conference on Biomedical Engineering,
2018 Influence of fiber treatment on dimensional stabilities of rattan waste composite boards. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018 Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018),
2017 Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2017 Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016,
2016 Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016,
2016 Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2015 Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities,
2015 Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015,
2014 Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique . In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014),
2014 Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014,
2013 Creativity and the future of engineering education: making the strange familiar. In: International Conference on Engineering Education 2013,
2012 Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012),
2011 Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011),
2011 Eco-friendly PLA-kenaf fibre biocomposite for food packaging . In: Malaysia Technology Expo (MTE 2011),
2011 Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011,
2011 Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite powder. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011,
2011 Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011,
2011 Integrating and infusing of Islamic values in the existing engineering course subject: A case study . In: The 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11),
2011 Integrating Tawhidi values into science and engineering education: a case study. In: International Conference on Islamization in Modern Science and Scientification of Islamic Studies: Prospects and Bridges,
2011 Properties of compression moulding starch - nanoclay biocomposites . In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19) ,
2011 Properties of montmorillonite-reinforced thermoplastic sago starch composites . In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011),
2011 Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011),
2011 The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC),
2011 The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2010 An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010),
2010 Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition,
2010 Lightweight biodegradable cotton/albumen board (CAB) for sustainable environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010),
2010 Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM),
2009 Effects of nanoclays on the structure and properties of cotton/albumen composites . In: 2nd Annual International Conference on Green Technology and Engineering,
Book

2011 SAGO (metroxylon rottb) and its applications. IIUM Press, ISBN: 9789674181635
Book Section

2022 Comparative studies on the electrical properties of PEDOT:PSS doped SNP films and hydrogels for medical electrode applications. In: Trans Tech Publications Ltd, ISBN: 1013-9826 (ISSN), pp. 43-49
2018 Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: IIUM Press, International Islamic University Malaysia, ISBN: 978-967-491-010-5, pp. 152-166
2012 Surface properties and thermal behavior of Malaysian coir fiber. In: Universiti Sains Malaysia, ISBN: 978-983-861-533-4, pp. 1-7
2011 An investigation of hybrid composites tubes subjected to quasi-static loading. In: IIUM Press, ISBN: 9789674182311, pp. 138-143
2011 Comparative study between standard and commercial sago starch. In: IIUM Press, ISBN: 9789674181635, pp. 17-26
2011 Effect of compaction time on the properties of coir fiber reinforced cement-albumen composite. In: IIUM Press, ISBN: 9789674182311, pp. 68-73
2011 Foam impregnation method for artificial bone graft application : study on the effect of drying time. In: IIUM Press, ISBN: 9789674181680, pp. 78-83
2011 Foam impregnation method for artificial bone graft application: study on the effect of sintering temperature. In: IIUM Press, ISBN: 9789674181680, pp. 84-88
2011 Investigation on the effect of ultra violet on cotton albumen composite. In: IIUM Press, ISBN: 9789674181680, pp. 96-99
2011 Investigation on the effect of water immersion on cotton albumen composite. In: IIUM Press, ISBN: 9789674182311, pp. 178-181
2011 Malaysian coir fibre for acoustical absorption cement composite panel . In: IIUM Press, ISBN: 9789674180218, pp. 39-48
2011 Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites. In: IIUM Press, ISBN: 9789674182311, pp. 144-149
2011 Mechanical behaviour of Oil Palm Empty Fruit Bunch (OPEFB) albumen-composites concrete. In: IIUM Press, ISBN: 9789674182311, pp. 49-54
2011 Oil Palm Empty Fruit Bunch (OPEFB) for lightweight composites concrete . In: IIUM Press, ISBN: 9789674182311, pp. 74-79
2011 Overview on Malaysia natural fibres and its applications . In: IIUM Press, ISBN: 9789674180218, pp. 1-19
2011 Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites . In: IIUM Press, ISBN: 9789674181635, pp. 101-114
2011 Sago starch: nanoclay biocomposites film. In: IIUM Press, ISBN: 9789674181635, pp. 87-99
2011 Sago, its properties and applications: a review. In: IIUM Press, ISBN: 9789674181635, pp. 1-15
2011 SEM analysis of coir fiber and coir fiber-albumen-concrete before and after surface treatments. In: IIUM Press, ISBN: 9789674181659, pp. 220-229
2011 The effect of fibre content on thermal property of coir fibre reinforced cement-albumen composite. In: IIUM Press, ISBN: 9789674181673, pp. 172-177
2011 The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete. In: IIUM Press, ISBN: 9789674182311, pp. 108-113
2011 The influence of biopolymer and natural fiber on the physical and mechanical properties of cement composite. In: IIUM Press, ISBN: 9789674182311, pp. 55-61
2011 Thermal and morphological study of Biopolymer Cotton-Albumen Clay (BCAC) composites. In: IIUM Press, ISBN: 9789674182311, pp. 62-67
2011 Workability of coir fibre-reinforced cement-albumen composite. In: IIUM Press, ISBN: 9789674181673, pp. 195-200
Monograph

2017 Investigation of surface degradation of binderless particleboards (BPB) by utilizing rattan furniture waste materials. In: ,