Staff Directory
Academic Qualification
- Ph.D in Non-linear Dynamics - Doctor of Philosophy, Virginia Tech. University
- Master in Applied Computational Mechanics - Masters Degree, Zagazig University
- Bachelor in Mechanical Engineering - Bachelor Degree, Zagazig University
Waleed Fekry Faris (Prof. Dr.)
Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
waleed@iium.edu.my
1207
Expert Profile
Professor Waleed Fekry Faris is a Professor in the Department of Mechanical Engineering, International Islamic University Malaysia (IIUM).
He got his BSc and MSc in Mechanical Engineering from Zagazig University, Egypt. His Ph.D in non-linear systems was from Virginia Tech, USA. Prof. Faris is a well-known internationally in the fields of dynamics and control and also in vehicle dynamics.
He is a reviewer for major international journals in the above fields, and a committee member in most of the well-established conferences in the above fields. He is on the editorial board for four international journals in automotive engineering and vibrations.
He has to his credit more than 120 journal papers, 85 conference papers, five books and many book chapters. Professor Faris has been advising many bodies within Malaysia and outside Malaysia as a consultant in engineering fields and in higher education policies as well.
He headed an international organization for quality assurance and accreditation under the Islamic Federation of Islamic Universities. Also, he is advising on management issues and published papers and books in the management fields, specifically quality assurance and strategic management.
He got his BSc and MSc in Mechanical Engineering from Zagazig University, Egypt. His Ph.D in non-linear systems was from Virginia Tech, USA. Prof. Faris is a well-known internationally in the fields of dynamics and control and also in vehicle dynamics.
He is a reviewer for major international journals in the above fields, and a committee member in most of the well-established conferences in the above fields. He is on the editorial board for four international journals in automotive engineering and vibrations.
He has to his credit more than 120 journal papers, 85 conference papers, five books and many book chapters. Professor Faris has been advising many bodies within Malaysia and outside Malaysia as a consultant in engineering fields and in higher education policies as well.
He headed an international organization for quality assurance and accreditation under the Islamic Federation of Islamic Universities. Also, he is advising on management issues and published papers and books in the management fields, specifically quality assurance and strategic management.
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Mechanical Control
Teaching Responsibilities
Acoustics and Noise Control | 2020/2021 2018/2019 2013/2014 2012/2013 2010/2011 2009/2010 |
Additive Manufacturing | 2023/2024 |
Advanced Computational Mathematics | 2022/2023 |
ADVANCED VEHICLE DYNAMICS | 2014/2015 2012/2013 2011/2012 2008/2009 2006/2007 |
ADVANCED VIBRATION | 2020/2021 2011/2012 2009/2010 |
AEROELASTICITY | 2006/2007 |
AUTOMOTIVE CONTROL SYSTEM | 2015/2016 2014/2015 2011/2012 |
AUTOMOTIVE CONTROL SYSTEMS | 2018/2019 |
AUTOMOTIVE INTEGRATED DESIGN | 2021/2022 2019/2020 |
AUTOMOTIVE MANUFACTURING PROCESS | 2019/2020 |
AUTOMOTIVE STYLING METHODOLOGIES | 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2005/2006 2004/2005 |
CONTROL SYSTEMS | 2009/2010 2006/2007 2005/2006 2004/2005 |
CONTROL SYSTEMS (LAB) | 2004/2005 |
DESIGN OF AUTOMOTIVE TRANSMISSION SYSTEMS | 2016/2017 |
DYNAMICS | 2004/2005 |
FLIGHT DYNAMICS AND CONTROL | 2006/2007 |
HALAQAH 1 (BR) | 2005/2006 |
HALAQAH 1 (BROTHER) | 2006/2007 |
HALAQAH 2 (BR) | 2005/2006 |
HALAQAH 2 (BROTHER) | 2005/2006 |
INTELLIGENT VEHICLE SYSTEM | 2019/2020 |
INTERNAL COMBUSTION ENGINE | 2006/2007 |
ISLAMIC PERSPECTIVE ON TECHNOLOGY & SOCIETY | 2023/2024 2022/2023 |
ISLAMIC PERSPECTIVE ON TECHNOLOGY & SOCIETY (RESEARCH MODE) | 2023/2024 2022/2023 |
KINEMATICS AND DYNAMICS OF MACHINERY | 2010/2011 2007/2008 |
MACHINE DESIGN | 2023/2024 |
MECHANICAL VIBRATIONS | 2015/2016 |
MODELING AND SIMULATION | 2007/2008 |
POWER TRAIN SYSTEMS | 2017/2018 2016/2017 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 |
PROJECT I | 2023/2024 2022/2023 2021/2022 2020/2021 |
PROJECT II | 2019/2020 2018/2019 |
RELIABILITY ENGINEERING FOR AUTOMOTIVE APPLIC | 2012/2013 2011/2012 |
SMART STRUCTURES | 2015/2016 2013/2014 2012/2013 |
SPECIAL TOPIC IN AUTOMOTIVE ENGINEERING I | 2006/2007 |
SPECIAL TOPICS IN MECHANICAL ENGINEERING | 2018/2019 2010/2011 |
STRUCTURAL DYNAMICS | 2014/2015 2013/2014 |
TECHNOLOGY MANAGEMENT | 2007/2008 |
VALUES, TECHNOLOGY AND SOCIETY | 2022/2023 2021/2022 2020/2021 |
VALUES, TECHNOLOGY AND SOCIETY (RESEARCH MODE) | 2021/2022 2020/2021 |
VEHICLE DYNAMICS | 2011/2012 2010/2011 2009/2010 2008/2009 |
VEHICLE DYNAMICS & SIMULATIONS | 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 |
VIBRATION AND AEROLASTICITY | 2006/2007 |
Supervision
Paramertric Thermal Analysis Of Plate-Fin Heat Sink Using Embossed Impressions.
Ph.D
Completed
2018
Main Supervisor
|
Active Disturbance Rejection Control For Active Suspension System.
Ph.D
Completed
2016
Main Supervisor
|
Analysis Of Circular Plate With Tunable Frequency
.
Ph.D
Completed
2015
Main Supervisor
|
Optimization And Control Of Semi-Active Suspension System For Off-Road Vehicles.
Ph.D
Completed
2014
Main Supervisor
|
Analytical Modelling Of Fuel Consumption And Regulated Exhaust Emission Rates For Trucks.
Ph.D
Completed
2014
Main Supervisor
|
A New Approach To Modeling And Simulation Of Automotive Industry In Support Of Performance And Control Analysis.
Ph.D
Completed
2011
Main Supervisor
|
Investigation Of The Causes Of Chatter In Machine Tools And Development Of A New Chatter Model.
Ph.D
Completed
2010
Co-supervisor
|
Performance Analysis Of The Numerical Model Of Wastewater Heat Recovery In Kuwait.
Ph.D
In Progress
Main Supervisor
|
Performance Analysis Of The Numerical Model Of Wastewater Heat Recovery In Kuwait.
Ph.D
In Progress
Main Supervisor
|
Islamic Values Of Transformational Leadership And Its Impact On Organizational Culture Change And Employee Performance: Case Of A Jordanian Company.
Ph.D
In Progress
Main Supervisor
|
Simulation Based Study Of Electric Vehicle Parameters.
Master
Completed
2023
Main Supervisor
|
Effect Of Vehicle Ride On The Fatigue Life Of A Lower Arm Ball Joint.
Master
Completed
2019
Co-supervisor
|
Fuzzy- Based Collision Avoidance System For Autonoumous Driving In Complicated Scenarios.
Master
Completed
2018
Main Supervisor
|
Modeling And Analysis Of Fluid-Induced Vibration In Pipelines.
Master
Completed
2018
Main Supervisor
|
Vehicle Occupant Accommodation Based On Nigerian Anthropometric Data.
Master
Completed
2018
Co-supervisor
|
Modeling And Simulation Of A Non-Linear Friction Damper With Full Car Model.
Master
Completed
2016
Co-supervisor
|
Design Of A Lookahead Controller In Heavy Duty Truck.
Master
Completed
2015
Main Supervisor
|
Intelligent Control System For Active Suspension For Off-Road Vehicles.
Master
Completed
2015
Main Supervisor
|
Modeling And Control Of Active Engine Mounts.
Master
Completed
2014
Main Supervisor
|
Finite Element Analysis Of Drilling Bits Stresses In Oil And Gas Industry.
Master
Completed
2014
Main Supervisor
|
Development Of Robust Hoo For Active Suspension Of H Car Model With Genetic Algorithm.
Master
Completed
2014
Main Supervisor
|
Study Of Air Polution Emission By Moving Vehicle In Highly Polluted Area.
Master
Completed
2014
Co-supervisor
|
Development Of An Efficient Electric Drive System For Elevator.
Master
Completed
2013
Main Supervisor
|
Ride Quality Analysis Of Active Suspension Systems For Off-Road Vehicle.
Master
Completed
2012
Main Supervisor
|
Investigation Of Heat Transfer Effect Of Nanoparticles On Pcr.
Master
Completed
2012
Co-supervisor
|
The Structural Integrity Assessment Of A Partially-Filled-Tank During A Straight Line Sudden Brake Application Pertaining To Sloshing.
Master
Completed
2012
Co-supervisor
|
Intelligent Controller For Flexible Manipulator.
Master
Completed
2011
Main Supervisor
|
Intelligent Controller For Flexible Manipulator.
Master
Completed
2011
Main Supervisor
|
An Ergonomic Concept Design Of A Motorbike With Prototyping.
Master
Completed
2009
Main Supervisor
|
Dynamic And Control Policies Analysis Of Semi-Active Suspension System For Off-Rood Vehicle.
Master
Completed
2009
Main Supervisor
|
Optimal Trajectory And Genetic Algorithm Based Energy Minimization For Robot Manipulators.
Master
Completed
2007
Co-supervisor
|
Optimal Trajectory And Genetic Algorithm Based Energy Minimization For Robot Manipulators.
Master
Completed
2007
Co-supervisor
|
Xenotransplantation: Medical And Islamic Perspectives.
Master
In Progress
Main Supervisor
|
Research Projects
Completed
2021 - | Testing of Nanoparticle Lubricant - Graphene Based Engine Oil's Endurance Performance Study Using A Four Cylinder Gasoline Engine |
2018 - 2021 | Construction of Moral Values Education Course Module for Pre-Service Teachers |
2017 - 2021 | Constructing and Validating An Islamic Spiritual Enhancement Module For Mental Health In Psychology Stress ( International Institute of Islamic Thought (IIIT) ) |
2017 - 2019 | Dynamic Modeling, Navigation and Control of Micro Aerial Vehicles |
2012 - 2012 | Problems Encountered by Scholarships Students on Scholarship Schemes in both the Islamic University Madinah (KSA) and International Islamic University Malaysia: A Comparative Study |
2012 - 2016 | Vibration Isolation Method using Variable Stiffness and Friction Damping |
2011 - 2012 | Systematic Study of University Quality System |
2009 - 2011 | An Investigation of the Mechanical Behaviour of MEMS-based Microswitch under Thermal and Electrostatic Loading including Cyrogenic Effect |
2009 - 2011 | Analysis of Stability and Control Strategies for an Autonomous Unmanned Aerial Vehicle (UAV) |
2009 - 2011 | Analysis and Modelling of Proton Exchange Membrane (PEM) Fuel Cell System |
2009 - 2009 | Machine Element Design for Engineers |
2009 - 2013 | Design and Development of the Mechanical System for Golleq |
2009 - 2011 | Modeling and Stimulation for Engineers |
2008 - 2014 | Humanized Industrial Design of a Handphone. |
2008 - 2009 | Intelligent Controller of Flexible Manipulator |
2008 - 2012 | Vibro-Acoustic Analysis of Automotive Vehicles |
2007 - 2019 | Study of Characteristics and Performance of Active Engine Mounting System Using Artificial Neural Network Based Controller |
2007 - 2012 | Simulation and Device Modeling of Poly-Si Thin Film Solar Cells |
2007 - 2012 | Total Vehicle Dynamics Analysis |
2006 - 2011 | Influence of Different Methods of Slaughtering on the Release and/or Retention of Neurotransmitter and Other Biomolecules at Neuromascular Junction |
2005 - 2008 | Modeling and Analysis of Fluid/Structure Interaction in Micropumps |
2004 - 2007 | Nonlinear Modeling and Analysis of Mems-Based Diaphragm Devices |
On-Going
2023 - Present | The Essence of The Conference of The Rulers and Its Legal Implication to The Malaysian Constitutional System |
2022 - Present | Introduction to Futures Studies |
2022 - Present | TEACHING MATERIALS PROJECT:- ENGINEERS AND THE SOCIETY |
2021 - Present | The Effect of Recurrent Pedal Pressings and Sitting Posture on the Driver's Fatigue During Road Traffic Delay via System Identification Models and Deep Learning Techniques |
2014 - Present | Pembangunan Pelaksanaan Indeks Syariah Dalam Pentadbiran Negara |
2012 - Present | The Development of a Vibration Isolation Prototype with Adaptable Stiffness and Damping Coefficient |
2009 - Present | An Investigate Analysis of the Use of Road Topography Data to Enhance Truck Performance along Roadways |
Publications
Article
Conference or Workshop Item
Book
2022 | Regorounding Maqasid al-Shariah" the Qur'anic semantics and foundation of human common good. Islamic Book Trust, IBT and International Institute for Muslim Unity, IIMU, IIUM, ISBN: 978-967-0526-97-3 |
2022 | Regrounding maqasid al-shari'ah: the Qur'anic semantics and foundation of human common good. Islamic Book Trust, ISBN: 978-967-0526-97-3 |
2021 | A manual of spiritual therapy: Islamic perspective. International institute of Muslim Unity, IIUM, ISBN: 978-967-25504-0-2 |
2021 | Spiritual therapy : an islamic perspective. International Institute for Muslim Unity (IIMU) Islamic Book Trust International Institute for Muslim Unity, ISBN: 9789670526942 |
2017 | Muslim women’s contributions to society. Centre for Muslims World Affairs, ISBN: 978 –967 –2041–10– 8 |
2016 | al-Tarbiyah wa-al-murabbi al-qira'ah fi hayah Sa'id al-Nursi wa-Rasa'il al-Nur. |bal-Jami'ah al-Islamiyah al-'Alamiyah,|c2016, ISBN: 9789839470970 |
2011 | Contributions of early muslim scientists to engineering sciences and related studies. IIUM Press, ISBN: 978-967-418-157-4 |
2011 | Introduction to machine element design for engineers. IIUM Press, ISBN: 9789675272936 |
2011 | Islamization, ethics and values in science and technology. IIUM Press, ISBN: 978-967-022-582-1 |
2009 | A first course in control systems. IIUM Press, ISBN: 9789833855650 |
2009 | Fundamentals of fluid mechanics. IIUM Press, ISBN: 9789833855889 |
2006 | Islamic engineering ethics: foundation integration and practice. Future Text Publications, ISBN: 9833004660 |
2000 | Automotive styling methodologies: lecture notes. Self-published, ISBN: |
Book Section
2022 | Sustainable development goals (SDGs) and the leadership of Prophet Muhammad (SAW). In: International Institute for Muslim Unity (IIMU) and the Center for Islamisation (CENTRIS), International Islamic University Malaysia (IIUM), ISBN: 978-967-25504-1-9, pp. 174-203 |
2022 | Sustainable development goals (SDGs) and the leadership of Prophet Muhammad (SAW). In: International Institute for Muslim Unity (IIMU) and the Center for Islamisation (CENTRIS), International Islamic University Malaysia (IIUM), ISBN: 978-967-25504-1-9, pp. 174-203 |
2019 | The Kulliyyah of Architecture and Environmental Design: building on rich heritage. In: IIUM Press, ISBN: 978-967-491-035-8, pp. 279-287 |
2019 | The Kulliyyah of Engineering: producing Muslim engineers. In: IIUM Press, ISBN: 978-967-491-035-8, pp. 289-303 |
2019 | The Kulliyyah of Engineering: producing Muslim engineers. In: IIUM Press, ISBN: 978-967-491-035-8, pp. 289-303 |
2013 | Kulliyyah of Engineering; Producing a Muslim engineer. In: IIUM Press, ISBN: 9789674182700, pp. 239-249 |
2013 | Kulliyyah of Engineering; Producing a Muslim engineer. In: IIUM Press, ISBN: 9789674182700, pp. 239-249 |
2011 | Al-Majusi: the pioner in obstetrics. In: IIUM Press, ISBN: , pp. 7-11 |
2011 | Design and implementation of fuzzy control for two link flexible manipulator. In: IIUM Press, ISBN: 9789670225685, pp. 209-214 |
2011 | Design and production of carbon nanotube-based biosensor . In: IIUM Press, ISBN: 9789674181369, pp. 130-137 |
2011 | E-waste : problems, Islamic perspective and solutions. In: IIUM Press, ISBN: 9789670225821, pp. 112-124 |
2011 | Fazlur Rahman Khan's understanding of tube structural system of skyscrapes. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 115-120 |
2011 | Fazlur Rahman Khan's understanding of tube structural system of skyscrapes. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 115-120 |
2011 | Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: IIUM Press, ISBN: 9789670225685, pp. 591-596 |
2011 | Muslim contributions to physics. In: IIUM Press, ISBN: 9789670225821, pp. 100-110 |
2011 | Nasir al-Din al-Tusi's understanding of trigonometry. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 58-64 |
2011 | Neural network controlled of an active engine mounting system using a nonlinear electromagnetic. In: IIUM Press, ISBN: 9789670225685, pp. 194-202 |
2011 | Semi-active suspension system for off-road vehicles. In: IIUM Press, ISBN: 9789670225685, pp. 119-128 |
2011 | The contribution of Ibn al-Awwam in botany and agriculture. In: IIUM Press, ISBN: 978-967-418-4, pp. 41-44 |
2011 | The nano world of Munir Nahfey. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 127-134 |
2011 | Towards an Islamic theory of development based on Qur'anic approach : Surah Quraish as a case study. In: IIUM Press, ISBN: 9789670225821, pp. 46-54 |
2011 | Use and abuse of technology : Internet as a case study. In: IIUM Press, ISBN: 978-967-0225-82-1, pp. 143-156 |
2009 | Nonlinear modeling and analysis of mems-based diaphragm devices. In: IIUM Press, ISBN: 9789833855780, pp. 360-371 |
2006 | Ethical challenges of informatin technology : an Islamic perspective. In: Future Text Publications, ISBN: 983-3004-66-0, pp. 81-89 |
2006 | Muslim scientists and world civilizations. In: Future Text Publications, ISBN: 983-3004-66-0, pp. 18-26 |
Monograph
2021 | Construction of moral values education course module for pre-services teachers. In: IIUM Press, |
2012 | Vibro-Acoustic Analysis of Automotive Vehicles. In: s.n, |