Staff Directory


Noor Azlina Binti Hassan

Academic Qualification

  • Ph.D in Material Sciences - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • M.Sc in Material Science - Masters Degree, Universiti Kebangsaan Malaysia (UKM)
  • B.Sc (Hons) in Materials Science - Bachelor Degree, Universiti Kebangsaan Malaysia (UKM)

Noor Azlina Binti Hassan (Assoc. Prof. Ts. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


noorazlina_hassan@iium.edu.my
5733


Expert Profile


Dr. Noor Azlina Hassan, a graduate of University Kebangsaan Malaysia, started her career as a researcher at the Faculty of Science and Technology, UKM, in 2003. She was appointed as an Assistant Professor in Manufacturing and Materials Engineering (IIUM) in 2011. She obtained the Bachelor of Science (Materials Science), Master of Science (Materials Science) and Degree of Doctor of Philosophy in Materials Science from UKM.
She was selected for a scholarship for sub-specialist/post-doctoral in 2013 and worked with IBM, Research Centre, USA under a special research programme with the Ministry of Education Malaysia (MOE), NanoMalaysia Berhad (NMB) and IBM Almaden Research Centre, San Jose, California for a special project of Nanogel Star Polymer Anti-Microbial Research before she returned to Malaysia in 2014.
She has been appointed as an Academic Advisor for Materials Engineering and serves as an Assistant Professor in the Department of Manufacturing and Materials Engineerig, Kulliyyah of Engineering.


Teaching Responsibilities


ADVANCED MATERIALS CHARACTERIZATION 2022/2023 2021/2022 2020/2021 2019/2020
Advanced Materials Characterizations 2023/2024
CONTEMPORARY MATERIALS FOR ENGINEERING APPLICATIONS 2022/2023 2021/2022 2018/2019
FINAL YEAR PROJECT 1 2023/2024
FINAL YEAR PROJECT I 2023/2024 2022/2023 2021/2022 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
FUNDAMENTAL OF MATERIALS SCIENCE AND ENGINEERING 2023/2024 2022/2023 2021/2022
FUNDAMENTALS OF MATERIALS ENGINEERING 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
FUNDEMENTAL OF MATERIALS SCIENCE AND ENGINEERING 2021/2022
INTRODUCTION TO ENGINEERING WORKSHOP 2023/2024
MATERIALS CHARACTERIZATION 2016/2017 2015/2016 2014/2015
MATERIALS CHARACTERIZATION AND NON- DESTRUCTIVE TESTING 2023/2024 2022/2023
MATERIALS CHARACTERIZATION AND NON-DESTRUCTIVE TESTING 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
MATERIALS ENGINEERING LAB II 2018/2019 2017/2018
MATERIALS ENGINEERING LAB III 2016/2017 2015/2016 2014/2015 2012/2013 2011/2012
MATERIALS ENGINEERING LAB IV 2014/2015 2013/2014
NANOMATERIALS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2017/2018
NDT AND EVALUATIONS 2012/2013
NONDESTUCTIVE TESTING AND EVALUATION 2014/2015 2012/2013 2011/2012
POLYMER PHYSICS 2020/2021 2017/2018 2015/2016 2012/2013 2011/2012
POLYMER PROCESSING 2018/2019
SEMINAR 2014/2015 2013/2014
SEMINAR II 2011/2012
SPECIAL TOPICS IN MATERIALS ENGINEERING 2012/2013 2011/2012


Supervision


Analysis Of Operational Factors Affecting Boiler Performance: Kuwait As A Case Study.
Ph.D Completed 2022 Co-supervisor
Synthesization And Characterization Of Hybrid Zno-Sio2 Nanoparticles For Anti-Corrosion Nanocoating Of Medium Carbon Steel .
Ph.D Completed 2018 Main Supervisor
Characterization Of Graphene Oxide Pickering Emulsion And Silica Nanoparticles For Waterborne Epoxy Coating.
Master Completed 2020 Main Supervisor
Development And Characterization Of Plasticized Polylactic Acid Biocomposite With Durian Skin Fibre For Food Packaging Application.
Master Completed 2019 Co-supervisor
Polyhydroxyalakanoates (Pha) As Biodegradable Backbone Binder For Ss316l Metal Injection Moulding (Mim) Process.
Master Completed 2019 Co-supervisor
Effects Of Electron Beam Irradiation On The Properties Of Recycled Polypropylene/ Microcrystalline Cellulose Composites.
Master Completed 2017 Co-supervisor
Kenaf Core Sandwich Structure Composites Toughened With Modified Epoxy.
Master Completed 2015 Main Supervisor
Polyhydroxyalkanoates/Zinc Oxide (Pha/Zno) Nanocomposites For Dielectric Applications.
Master Completed 2015 Main Supervisor
Preparation And Characterization Of Polyhydroxybutyrate Filled Clamshells Biocomposite.
Master Completed 2015 Co-supervisor


Research Projects


Completed
2019 - 2023 Dyes Adsorption Using Hybrid Aerogel-Based Cellulose Nanocrystal Isolated From Palm Oil Biomass
2017 - 2021 Mechanism of the adhesion in between of polyelectrolyte layers and nanoreservoir for self-healing nanocoating.
2016 - 2019 Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2015 - 2018 Study on the Novel Binder Based Biodegradable Polyhyroxyalkanoates (PHA) For Metal Injection Moulding Application
2014 - 2017 Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene
2013 - 2015 Development of Environmental Friendly ZnO Nanocoating for Building Applications
2013 - 2016 Fundamental Studies on Hybrid ZnO-SiO2 Sol-gel Nanocoating for Anticorrosion Protection of Carbon Steel
2012 - 2015 Prototype Development of High Performance Lightweight Nanocomposite Sport Shoes
2012 - 2016 Development of pultruded green hybrid typha latifolia / recycled polyethyleneterepthalate composites
2011 - 2014 RU 2011: Mechanical and Thermal Properties of Bioplastic Nanocomposites
On-Going
2020 - Present Investigation on the process parameters and optimum performance of Al alloy-Graphene nanoplatelets self-lubricating nanocomposite via injection moulding technique for tribological application.
2018 - Present Development of self-healing nanocoating via polyelectrolyte assemblies for corrosion protection applications.
2015 - Present Investigation on a Novel Nondestructable Composite Materials for the Development of Disaster Rescue Box
2009 - Present Advanced Materials and Surface Engineering (AMSERU)


Publications


Article

2021 Graphene oxide microcapsules (GOMs) with linseed oil core via Pickering emulsion method effect of disperse speed. IIUM Engineering Journal, 22 (1) pp. 213-222
2021 Mechanochemical durability and self-cleaning performance of zinc oxide-epoxy superhydrophobic coating prepared via a facile one-step approach. Ceramics International, 47 (11) pp. 15825-15833
2020 Effect of solid particles concentration to the size of graphene oxide liquid crystals pickering emulsion. TEST Engineering & Management, May -June 2020 () pp. 1087-1092
2020 Effect of ZnO-SiO2 nanoparticles on the morphology of nanocoating. Test Engineering and Managemant, 83 () pp. 1215-1218
2020 Effects of Epoxidized Palm Oil (EPO) on mechanical properties of Polyhydroxyalkanoates (PHA). TEST Engineering & Management, 83 (May – June 2020) pp. 1438-1455
2018 Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, Special issue () pp. 63-67
2018 Influence of epoxidized palm oil on polyhydroxyalkanoates tensile properties. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1) pp. 556-559
2018 Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1) pp. 378-383
2018 Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1) pp. 447-451
2017 Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (Issue 1) pp. 19-24
2017 Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. Materials Science Forum, 894 (4) pp. 62-65
2017 Synthesis and characterization of silica ceramic membranes via sol-dip coating. Journal of Advanced Research in Materials Science, 39 (1) pp. 1-7
2016 Biodegradation properties of poly (Lactic) acid reinforced by kenaf fibers. ACTA PHYSICA POLONICA A, 129 () pp. 835-837
2016 Effect of nanoparticles on wettability of nanocoating on carbon steel. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2) pp. 71-74
2016 Green biosynthesis of silver nanoparticles using ‘Polygonum hydropiper’ and study its catalytic degradation of methylene blue . Procedia Chemistry, 19 () pp. 594-602
2015 Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research, 1115 () pp. 275-278
2015 Morphology and mechanical properties of MIM feedstock using TPNR backbone binder. Advanced Materials Research, 1115 () pp. 279-282
2015 The effects of various TPNR binder compositions on feedstock preparation for MIM process. Advanced Materials Research, 1115 () pp. 304-307
2013 Effects of Multi-Walled Carbon Nanotubes (MWCNTS) on the mechanical and thermal properties of plasticized polylactic acid Nanocomposites. Advanced Materials Research, 812 () pp. 181-186
2013 Thermal analysis of kenaf sandwich panel. Advanced Materials Research, 812 () pp. 271-274
2012 Effect of nanoclay on the microstructure and the properties of Thermoplastic Natural Rubber (TPNR)/OMMT nanocomposites. Journal of Thermoplastic Composite Materials, 25 (3) pp. 351-362
2012 Investigations on metal injection molding of 316L SS using Thermoplastic Natural Rubber (TPNR) binder as a new system. Advanced Materials Research, 576 () pp. 150-153
2012 Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/clay composite. Advanced Materials Research, 576 () pp. 318-321
2012 Physical and mechanical properties of Thermoplastic Natural Rubber (TPNR) nanocomposites. Advanced Materials Research, 576 () pp. 394-397
2012 Thermogravimetric analysis of OMMT filled HDPE/EPDM treated EB irradiation. Advanced Materials Research, 576 () pp. 362-365
2011 Enhanced tensile and dynamic mechanical properties of thermoplastic natural rubber nanocomposites . Polymer-Plastics Technology and Engineering, 50 (13) pp. 1383-1387
2011 Oxygen barrier properties of new thermoplastic natural rubber nanocomposites. Polymer-Plastics Technology and Engineering, 50 () pp. 1564-1569
Conference or Workshop Item

2020 Surface roughness of ZnO-SiO2 nanocoating. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019 (RCND 2019),
2019 Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018),
2018 Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018 Hardness and adhesion performances of nanocoating on carbon steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018 Preparation of SS316L MIM feedstock with biopolymer as a binder. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2017 Mechanical properties of toughened polyester reinforced with untreated and treated kenaf hybird carbon composite. In: International Conference on Frontiers of Composite Materials (ICFCM 2016),
2017 Thermal, structural and mechanical properties of melt drawn cur-loaded poly(lactic acid) fibers. In: "Advances in Material and Processing Technologies Conference, AMPT 2017",
2016 Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Frontiers of Composite Materials 2016,
2016 Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Synthesis of SiO2 nanostructures using sol-gel method. In: 5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS 2015),
2016 Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP),
2012 The effect of coupling agent treatment on the mechanical and flame retardancy properties of rigid PVC-ATH nanocomposites. In: The International Conference on Composite Interfaces,
Book

2012 Advances in manufacturing and materials engineering. Trans Tech Publications Ltd., , ISBN: 978-3-03785-498-3
Book Section

2011 Comparison of mechanical properties between untreated and sulphuric acid treated short carbon fiber reinforced Thermoplastic Natural Rubber (TPNR) composite. In: IIUM Press, ISBN: 9789674181673, pp. 64-68
2011 Polymer clay nanocomposite: Part 1. In: IIUM Press, ISBN: 9789674181673, pp. 6-10
2011 Polymer clay nanocomposites: part I. In: IIUM Press, ISBN: 9789674181673, pp. 6-10
2011 Polymer clay nanocomposites: part II - synthesis of polymer nanocomposites. In: IIUM Press, ISBN: 9789674181680, pp. 115-119
2011 Preparation and characterization of Thermoplastic Natural Rubber (TPNR) nanocomposites. In: IIUM Press, International Islamic University Malaysia, ISBN: 9789674181673, pp. 1-5
2011 The effect of processing parameter on tensile properties of thermoplastic natural rubber nanocomposites. In: IIUM Press, ISBN: 9789674181673, pp. 58-63
2011 The effect of processing parameters on tensile properties Empty Fruit Bunch (EFB) fiber reinforced thermoplastic natural rubber composites. In: IIUM Press, ISBN: 9789674182311, pp. 150-154