Staff Details

Mohammed Ataur Rahman

Mohammed Ataur Rahman
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 4544
Email address: arat@iium.edu.my

Academic Qualification

  • Mechanical Engineering - Bachelor Degree , Chittagong University of Engineering & Technology
  • Management Technology and Innovation - Masters Degree , Universiti Teknologi Malaysia (UTM)
  • Automotive Engineering - Doctor of Philosophy , Universiti Putra Malaysia (UPM)

Area of Specialisation

  • Engineering Tech ~ Engineering And Technology ~ Automotive Engineering ~ Other Automotive Engineering n.e.c. - Electromagnetic Hybrid Engine and IC engine Hybrid Electrical and Electrical Urban Car Electromagnetic Actuated CVT and DC Motor Position Control CVT Hybrid Electrical Intelligent Air-cushion Vehicle for Swamp terrain Power train (Electrical, Electro

Professional Membership

  • 2013-2015 International Journal of Electrical Energy and Energy System (Q1-Journal), Elsevier
  • 2010-2015 Fellow, International Society of Terrain Vehicle System (ISTVS)
  • 2011-2012 Internation Society of Terrain Vehicle System
  • 2011-2012 CEng., Chartered Engineer (CEng), MIMechE
  • 2011 Elsevier Science (Journal of Terramechanics)

Teaching Responsibilities

AUTOMOTIVE CHASIS SYSTEMS 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
AUTOMOTIVE ENGINEERING LAB IV 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
AUTOMOTIVE INSTRUMENT SYSTEM 2007/2008 2006/2007
DESIGN OF AUTOMOTIVE TRANSMISSION SYSTEMS 2014/2015 2013/2014
DYNAMICS 2007/2008 2006/2007
DYNAMICS 2007/2008 2006/2007
ENGINE DESIGN 2011/2012
INTRODUCTION TO AUTOMOTIVE ENGINEERING 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
MICRO ELECTROMECHANICAL SYSTEMS 2015/2016 2014/2015 2013/2014
POWER TRAIN SYSTEMS 2015/2016
PROJECT I 2008/2009 2007/2008
PROJECT II 2008/2009 2007/2008
PROJECT II 2008/2009
VEHICLE DYNAMICS 2013/2014
VEHICLE DYNAMICS AND CHASSIS SYSTEMS 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
VEHICLE ELECTRICAL AND INSTRUMENTATION SYSTEMS 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
VEHICLE ELECTRICAL SYSTEMS 2008/2009 2007/2008 2006/2007
VEHICLE ELECTRONICS & INSTRUMENTATION SYSTEMS 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013

Research Projects

Completed

2012 - 2014
Development of Electrical Vehicle by Converting Proton SAGA Conventional Car
2011 - 2013
Modification of The Design and Developed Hybrid Engine Powered Urban Concept Car
2010 - 2014
Electromagnetic Actuated CVT System for Medium Size Passenger Car
2010 - 2012
The Hybrid Car With Waste Gas Recovery
2009 - 2010
Design and Development of an "Urban Concept Hybrid Car"
2009 - 2011
Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2008 - 2011
Design and Development a Model on Hybrid Full-Tracked Air-Cushion Electrical Vehicle for Swamp Peat Terrain in Malaysia
2008 - 2010
Study on Traction Mechanics of a Hybird Semi-Tracked-Wheeled Vehicle for Low Bearing Capacity Peat Soil
2008 - 2010
Design and Fabrication of 2nd Generation IIUM Buggy Car
2008 - 2011
Investigation and Probable Solution of Low End Torque Dip Problem of 1.6L Gasoline Engine

In Progress

2016 - Present
Development Prototype of Electromagnetic Actuator for the Continuosly Variable Transmission of Passenger Car
2016 - Present
Development of a Laboratory Scale Palladium (Pd)/ Graphene Oxide (GO) Catalyst Based Steam Reformer
2015 - Present
Study of Three Dimensional Graphene Composites for Lead-supercapacitor Hybrid Battery System
2014 - Present
Parametric Modelling and Development of Battery Cell Balancing for Energy Optimisation in Electric Vehicle (EV)
2013 - Present
ESTABLISHMENT OF THE IIUM CENTRE OF EXCELLENCE FOR ELECTRIC MOBILITY(ICEM)

Publications

Article

2017
The knowledge, awareness, attitude and motivational analysis of plastic waste and household perspective in Malaysia. Environmental Science and Pollution Research , 24 (3). pp.2304-2315.
2017
Two-phase evaporative battery thermal management technology for EVs/HEVs: theory and control. International Journal of Automotive Technology , 18 (5). pp.875-882.
2017
Physics of ZnO/SiO2 electrolyte semi-conductive thermal electric generator. International Journal of Advanced and Applied Sciences , 4 (5). pp.35-40.
2017
Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering , 184
2017
The theory of the development of an electromagnetic engine for automotive use. International Journal of Advanced Robotics and Automation , 2 (1). pp.1-8.
2017
Thermoelectric technology for IC engine waste energy harvesting:?liquid cooling approach. International Journal of Scientific and Engineering Research , 7 (11). pp.1-12.
2017
Health impact of river water pollution in Malaysia. International Journal of Advanced and Applied Science , 4 (5). pp.78-85.
2017
Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering , 184
2017
A novel electro conductive graphene/silicon-dioxide thermo-electric generator. IOP Conference Series: Materials Science and Engineering , 185 pp.1-12.
2017
Parametric study of palladium/graphene catalyst on-board steam reformer for hydrogen generation from IC engine’s waste. International Journal of Engineering & Technology IJET-IJENS , 17 (1). pp.13-24.
2016
Lithium battery recycling management and policy. International Journal of Energy Technology and Policy , 13 (3). pp.278-291.
2016
Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN Journal of Engineering and Applied Sciences , 11 (1). pp.362-367.
2015
Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal , 16 (2). pp.57-68.
2015
How individual values and attitude influence consumers’ purchase intention of electric vehicles—some insights from Kuala Lumpur, Malaysia . Environment and Urbanization ASIA , 6 (2). pp.1-18.
2015
Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal , 16 (2). pp.69-78.
2015
ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. Journal of Mechanical Science and Technology , 29 (7). pp.2793-2802.
2015
Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews , 51 pp.382-395.
2015
Electricity generation from EV body build with Al2O3 filler ER sandwiched by carbon fiber and lithium thin plate . Energy Education Science and Technology Part A: Energy Science and Research , 33 (3).
2014
Development of electric vehicle: public perception and attitude, the Malaysian approach. World Review of Business Research , 5 (2). pp.149-167.
2014
Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology , 28 (9). pp.3667-3677.
2014
Design and fabrication of a simple cost effective spin coater for deposition of thin film. Advances in Environmental Biology , 8 (3). pp.729-733.
2014
Fuzzy logic based model for prediction of building wall humidity level. Indoor and Built Environment , 23 (4). pp.565-573.
2014
Development of electric vehicle: public perceptionand attitude, the Malaysian approach. World Review on International Transportation Research , 5 (2). pp.149-167.
2014
Fuzzy controlled evaporative battery thermal management system for EV/HEV. International Journal of Electric and Hybrid Vehicles (IJEHV) , 7 pp.1-21.
2014
Energy efficient electromagnetic actuated CVT system. Journal of Mechanical Science and Technology , 28 (4). pp.1153-1160.
2013
Performance investigation of an advanced tracked prime mover on the low bearing soil. Journal of Terramechanics , 50 (4). pp.230-244.
2013
Nonlinear modeling and simulation of waste energy harvesting system for hybrid engine: fuzzy logic approach. Journal of Renewable and Sustainable Energy Editorial Office , 5 pp.1-13.
2013
Evaluation of wind turbine power generation by using an adaptive neuro fuzzy inference system. Journal of Renewable and Sustainable Energy Editorial Office , xx (xx). pp.xx-xx.
2013
Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation , 5 (4). pp.217-225.
2013
Fuzzy control enerygy efficient hybrid engine for small scale vehicle. Research Journal of Applied Science, Engineering and Technology
2012
Fuzzy knowledge-based model for prediction of traction force of an electric golf car. Journal of Terramechanics , 49 (1). pp.13-25.
2012
Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research , 445 pp.899-904.
2012
Drag analysis of an aircraft wing model and without bird feather like winglet. International Journal of Aerospace and Mechanical Engineering , 6 (1). pp.8-13.
2012
Dynamic modeling and simulation of waste energy harvesting system for urban car. Advanced Material Research , 576 pp.679-682.
2012
Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology , 26 (7). pp.1-9.
2012
Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS) , 19 (4). pp.407-426.
2011
A study on automated traction control system of an electrical golf car. International Journal of Electric and Hybrid Vehicles (IJEHV) , 3 (1). pp.47-61.
2011
Prediction of aerodynamic characteristics of an aircraft model with and without winglet using fuzzy logic technique. Aerospace Science and Technology , 15 (8). pp.595-605.
2011
Design parameters study of an intelligent air-cushion tracked vehicle. Transactions of the Canadian Society of Mechanical Engineering
2011
Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS) , 18 (3). pp.227-244.
2011
Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 225 pp.721-734.
2011
Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing , 6 (3/4). pp.202-218.
2011
Performance measurement of a tracked vehicle system. International Journal of Automotive Technology , 12 (4). pp.503-512.
2011
Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS) , xx (xx).
2011
Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. Journal of Terramechanics
2011
Fuzzy logic control electromagnetic actuated CVT system. Journal of the Chinese Institution of Engineers , 35
2011
Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology , 12 (5). pp.745-753.
2011
Development of a model of of energy efficient hybrid engine towards green technology. International Journal of Electric and Hybrid Vehicles , 3 (2). pp.138-151.
2011
Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology , 75 pp.50-57.
2011
Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research , 265 pp.1719-1724.
2011
Application of fuzzy logic approach for an aircraft model with and without winglet. International Journal of Aerospace and Mechanical Engineering , 5 (4). pp.224-232.
2011
Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology , 25 (4). pp.1035-1041.
2010
Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach. World Academy of Science, Engineering and Technology , 62 pp.163-169.
2010
Power consumption prediction for an intelligent air-cushion tracked vehicle: fuzzy expert system. Journal of Energy and Power Engineering , 4 (5). pp.10-17.
2010
Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics , 47 (1). pp.45-54.
2010
Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption. International Journal of Vehicle Systems Modelling and Testing , 5 (2/3). pp.237-253.
2010
Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. International Journal of Aerospace and Mechanical Engineering , 4 (1). pp.288-295.
2009
Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal (3). pp.63-71.
2009
Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. Journal of Urban and Emvironmental Engineering , 3 (2). pp.43-51.
2009
Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal , 3 pp.15-28.
2009
Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS) , 16 (1/2). pp.225-242.
2009
Performance of ad hoc routing protocols in mobile WiMAX environment. Lecture Notes in Electrical Engineering , 33 pp.53-65.
2008
Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME) , 3 (2). pp.176-186.
2007
Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (2). pp.189-199.
2007
Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal , 8 (3). pp.155-162.
2007
Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 221 pp.789-800.
2007
Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (2). pp.118-124.
2007
Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (1). pp.40-47.
2006
Traction mechanics of the designed and developed segmented rubber track vehicle for Sepang peat terrain in Malaysia during turning motion: theoretical and experimental analysis. International Journal of Heavy Vehicle Systems (IJHVS) , 13 (4). pp.324-350.
2006
Tractive performance of a designed and developed segmented rubber tracked vehicle on Sepang peat terrain during straight motion: theoretical analysis and experimental substantiation. International Journal of Heavy Vehicle Systems (IJHVS) , 13 (4). pp.298-323.
2005
Designing framework of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia . IIUM Engineering Journal , 6 (1). pp.1-22.
2005
Simulated steerability of a segmented rubber tracked vehicle during turning on sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS) , 12 (2). pp.139-168.
2005
Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS) , 12 (3). pp.239-267.
2005
Processes involved in the design of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Vehicle Design (IJVD) , 38 (4). pp.347-378.
2004
Mechanical properties in relation to vehicle mobility of Sepang peat terrain in Malaysia. Journal of Terramechanics , 41 (1). pp.25-40.

Book

2012
The peat swamp:Productivity, traficability and mechanization. Nova Science Publishers Inc. , New York, USA . ISBN 978-1-61942-670-2.
2011
Advanced theory of peat vehicle mobility. VDM Verleg , Germany . ISBN 9783639304329.

Book Section

2014
Sensor-controlled intelligent vehicle systems: demand and needs for a global automotive landscape. In: Comprehensive material processing . Elsevier, Ltd , UK , pp.473-497. ISBN 9780080965321.
2011
Performance investigation of energy efficient hybrid engine towards green technology. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.131-137. ISBN 978-967-418-216-8.
2011
Design and development of an automatic car door opening and locking system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.48-52. ISBN 9789670225685.
2011
Development of unmanned vehicle utilizing GPS system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.53-58. ISBN 9789670225685.

Conference or Workshop Item

2017
Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Analysis of the internal temperature of the cells in a battery pack during SOC balancing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Modelling of an advanced charging system for electric vehicles. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16) , Kuala Lumpur
2015
The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015) , Singapore
2014
Design and development of a flying robot with improved time constant in rescue accident victims. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14) , Sunway Putra Hotel, Kuala Lumpur
2014
Noble evaporative battery thermal management system for EV/HEV . In: 4th International Conference on Industrial Engineering and Operations Management (IEOM) 2014 , Bali, Indonesia
2014
The design and development of small electric vehicles (EV) using power inverter based AC motor. In: 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14) , Sunway Putra Hotel, Kuala Lumpur
2014
Fuzzy controlled evaporative battery thermal management system for EV/HEV. In: ASME 2014 8th International Conference on Energy Sustainability co-located with ASME 2014 12th Fuel Cell Science, Engineering & Technology Conference , Boston, MA, USA
2013
Development of green transportation system. In: IIUM Enginnering Congress 2013(2-4July 2013) , Kuala Lumpur, Malaysia
2013
Fuzzy Logic Controlled Electromagnetic Actuated CVT system for passenger car. In: FISITA 2012 , Beijing, China
2013
Malaysian perception and attitude towards electric vehicle. In: IIUM Enginnering Congress 2013 , Kuala Lumpur, Malaysia
2013
Evaporative cooling system for electric vehicles battery pack. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16) , Kuala Lumpur
2011
Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition , Detroit, MI, USA
2011
Design and development of automatic parking system and electronic parking fee collection based on number plate recognition. In: 4th International Conference on Advanced Computer Theory and Engineering (ICACTE 2011) , Dubai, UAE
2011
Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011) , Istanbul, Turkey
2011
Fuzzy logic traction control system for a golf cart. In: 17th International Conference of the International Society for Terrain-Vehicle Systems , Blacksburg, Virginia, USA
2011
Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011 , Sheraton Krabi Beach Resort, Krabi, Thailand
2011
Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Design and implementation of fuzzy based controller for modern elevator group . In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA) , Langkawi
2011
Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM) , Kota Kinabalu, Malaysia
2011
Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management , Singapore
2011
Design of a 2-bit multi valued analog-to-digital converter . In: 4th International Conference on Mechatronics (ICOM) , Kuala Lumpur
2011
Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011) , Kuala Lumpur, Malaysia
2010
Design and development of UrbanConcept car. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Development of a fuel efficient hybrid engine towards green technology. In: International Conference on Sustainable Mobility 2010 , Seri Pacific Hotel Kuala Lumpur
2010
Development of an intelligent air-cushion system for a swamp tracked vehicle . In: 33rd FISITA World Automotive Congress 2010 , Budapest, Hungary
2010
Modelling of an Electromagnetic intake & exhaust control hybrid engine. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Finite element method for the study of air-cushion tracked vehicle-terrain interaction. In: International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) , Khulna, Bangladesh
2010
Tractive efficiency analysis for an intelligent air-cushion tracked vehicle. In: ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010 , Vancouver, British Columbia, Canada
2009
Intelligent air-cushion system of swamp peat vehicle control: fuzzy logic technique. In: International Conference on Mechanical Engineering 2009 (ICME2009) , Dhaka, Bangladeh
2009
Electromagnetic actuated CVT system for vehicle. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2009 (IEEM 2009) , Hong Kong
2009
Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009) , Dhaka, Bangladesh
2009
Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009 , Kuala Lumpur, Malaysia
2009
Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009) , Dhaka, Bangladesh
2008
Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08 , Kuala Lumpur, Malaysia
2008
Modeling of the developed flexible skirt air-cushion track vehicle model. In: 4th BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2008
Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering , Cairo, Egypt
2008
Probable solution of torque dip problem of CAMPRO 1.6L engine . In: 4th BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2008
Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008 , Germany
2008
Integrated mechanics for design of the hybrid electrical aircushion track vehicle for swamp peat. In: 4th BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2007
Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2007
A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2007
Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh