Faculties

Faculties

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Ahmad Faris bin Ismail
Professor

Print CV Email Me

Staff Detail


  • Ph.D in Chemical Engineering - Doctor of Philosophy, Rice University, Houston
  • Bachelor of Science in Chemical Engineering - Bachelor Degree, University of Houston
  • Natural Science ~ Physical Sciences ~ Fluid, Discharges and Plasma Physics ~ Fluid Dynamics -
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Nano Materials -
  • Engineering Tech ~ Engineering And Technology ~ Chemical Engineering ~ Other Chemical Engineering n.e.c. - CFD; Nanofluid; Combustion; Energy
COMPUTER AIDED ANALYSIS I 1994/1995 1996/1997 1997/1998
COMPUTER VISION AND IMAGE PROCESSING 1999/2000 2000/2001
COMPUTING SYSTEMS & PROGRAMMING 2001/2002 2002/2003 2003/2004 2008/2009 2009/2010
COMPUTING SYSTEMS & PROGRAMMING (LAB) 2003/2004
DIGITAL CONTROL 1998/1999
ENGINEERING CALCULUS I 1994/1995
ENGINEERING CALCULUS II 1994/1995 1995/1996
FLUID MECHANICS 2000/2001 2001/2002 2002/2003 2004/2005 2005/2006 2006/2007 2007/2008 2010/2011
FLUID MECHANICS (LAB) 2002/2003 2004/2005
FLUID SYSTEMS 1995/1996 1996/1997 1997/1998 1998/1999 2000/2001
HALAQAH 1 (BROTHER) 2003/2004 2004/2005
HALAQAH 1 (BROTHERS) 2002/2003
HALAQAH 2 (BROTHER) 2002/2003 2003/2004
LINEAR ALGEBRA & VECTOR CALCULUS 1995/1996 1996/1997 1997/1998 2000/2001 2004/2005 2005/2006
MECHATRONIC PRODUCTION SYSTEMS 1996/1997
PROJECT II 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN MEC ENG (MIXED MODE) 2017/2018 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN MEC ENG (RESEARCH MODE) 2017/2018 2018/2019
RESEARCH METHODOLOGY AND SEMINAR 2017/2018 2018/2019
SENSORS AND VISION SYSTEMS 1998/1999
STATICS 1998/1999 2000/2001 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019
TAUHID, AQIDAH & AKHLAQ (FOR ENGIN. STUDENTS) 1995/1996
THERMAL SCIENCES 1999/2000
In Progress
2017 - Present Modelling of CVD reactor for pristine graphene synthesis
2017 - Present Elucidating the Effects of Plasma Density on Graphene Growth from In-Situ Measurements by a Langmuir's Probe
2017 - Present INVESTIGATION OF THREE-SHAFT HIGH-BYPASS-RATIO ENGINE PERFORMANCE AND EMISSION PREDICTION USING ALTERNATIVE FUELS
2016 - Present An Investigation Into Vehicle Interior Structural Borne and Airborne Noise and its Relationship to Ride Comfort
2016 - Present Development Prototype of Electromagnetic Actuator for the Continuosly Variable Transmission of Passenger Car
2016 - Present Development of a Parallel biosensing system for personalized and pointof-care chemotherapy treatment
2015 - Present The Preparation of Feasibility Study for the Establishment of an International Islamic University in Afghanistan
2015 - Present Novel Theoretical Model of an electrochemical nanobiosensor for rapid detection of dengue
2014 - Present "Dengue-Screening" - Electromechanical Micro-total Analysis System (?TAS) for Sensitive and Rapic Detection of Dengue Fever
2013 - Present Production of Non-Thermally Processed Alternative Ingredients for Halal Food Products
2006 - Present New Name: Bio-Process and Molecular Engineering Research Unit (BPMERU) Biomolecular Engineering Research Unit (BioMERU)
Completed
2015 - 2017 Development of Battery Charging System for Electric Motobike
2015 - 2017 CFD Analysis of Straight Bladed Vertical Axis Wind Turbines with Selected Transition and Turbulence Models
2015 - 2018 Novel Theoretical Model of an electrochemical nanobiosensor for rapid detection of dengue
2014 - 2016 Novel Method to Synthesize Polymeric Biphasic Micro-Particles Using Droplet Microfluidic Lab on a Chip
2013 - 2017 Development of Green Transportation System
2012 - 2015 Design , develop and study on perfomance of the multidirectional absorber with cross design in air flow solar thermal collector
2012 - 2014 Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid
2012 - 2012 Preparing of Safe, Healthy and Balance Meal among Food Handlers in PETRONAS (Phase I)
2012 - 2012 Preparing of safe, Healthy and Balance Meal among Food Handlers in PETRONAS (Phase II)
2009 - 2009 Academic Performance Measurement : A Professional Development Programme for Faculty of Arts and Humanities King Abdul Aziz University, Jeddah Saudi Arabia
2009 - 2009 Academic Assessment with Tabuk University
2009 - 2011 A New Reliable Numeric-Analytic Solution for the initial value problems (IVPs)Using Multistage Homotopy Perturbation Method
2009 - 2012 A New Reliable Numeric-Analytic Technique to Solve Nonlinear Problems Arising in Engineering and Science
2008 - 2013 Dynamics and Instabilities of Heated Nano-Thin Falling Films
2008 - 2010 Improving the Performance of Electrical Discharge Machining (EDM) in Machining Titanium Alloys by Using Cryogenic Cooling of Electrode
2008 - 2011 The Effect of Surface Properties of Nano-particles on Effective Thermal Conductivity of Nanofluids
2008 - 2010 Leadership Development For Higher Education Reform Programme
2008 - 2010 Investigation of Feasibility for Gyro Ball as an alternative renewable energy sources
2007 - 2011 Noble Tool Based Micromilling for Nanometric Surface Finish
2007 - 2009 Hardware Prototyping of a Multiagent Based Smart Home for Disable People
2007 - 2008 Non-Newtonian Magneto-hydro-dynamics Rivlin-Ericksen Fluids: Exact and Numerical Solutions
2007 - 2011 Synthesis of High Purity and High Quality of Carbon Nanotubes by Using Multi Stage Chemical Vapour Deposition (MS-CVD)
2007 - 2009 Islamizing Engineering Curriculum: A Practical Approach
2007 - 2011 Kinetic Studies and Optimisation of Biofuel Production from Cassava-Starch via Yeast Fermentation.
2006 - 2011 Diverse Bacterial Phytate-Degrading Enzymes for Bioconversion of Plant Biomass Into High Value Added Animal Feed
2006 - 2011 Investigation on Solidification Characteristics of Spheroidal Graphite Fe-C-AI Cast Iron
2006 - 2009 Enhancement Of Machinability Of Hardened Steels In End Milling Using Advanced Cutting Methods And Tools
2006 - 2008 Hardware Prototyping Of Fetal Heart Rate Monitoring System Using Artificial Intelligence
2006 - 2009 Intelligent Wheelchair for Disabled People Using Brain Signal As Control
2006 - -1 Fundamental Study of Nano Fluidic Flow System using CFD
2006 - 2010 Molecular Modelling of Structure and Mechanisms of Glycoside Hydrolases
2006 - 2011 Influence of Different Methods of Slaughtering on the Release and/or Retention of Neurotransmitter and Other Biomolecules at Neuromascular Junction
2006 - 2008 Hardware Implementation Of A Real Time Image Compression System For Next Generation Mobile Communications
2005 - 2010 An Assessment of The Zero Energy House - A Comparison of Energy Conservation Strategies and Bioclimatic Performances in The Temperate and Tropical Context
Unknown - -1 DESIGN AND DEVELOPMENT AND EVALUATION OF A PRESSURE-BASED TYPING BIOMETRICS AUTHENTICATION SYSTEM
16 March 2002 Excellent Researcher Award. International Islamic University Malaysia - Kulliyyah level.
Article
2018 Power optimisation of electric coaster. International Journal of Electric and Hybrid Vehicles , 10 (1) pp.82-94
2018 Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids. International Journal of Applied Engineering Research , 13 (10) pp.7477-7487
2018 Improvement of biogas upgrading process using chemical absorption at ambient conditions. Jurnal Teknologi , 80 (1) pp.107-113
2018 Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology , 7 (3.13) pp.113-122
2018 Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation , 3 (4 (September-October)) pp.160-186
2018 Effect of exfoliated graphene defects on thermal conductivity of water based graphene nanofluids. International Journal of Applied Engineering Research , 13 (7) pp.4871-4877
2018 Nano conductive filler polymer towards energy efficient EV: A review. Energy Education Science and Technology Part A: Energy Science and Research , 36 (3) pp.185-204
2018 Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research , 36 (3) pp.139-151
2017 Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering , 184
2017 High-order approximate solutions of strongly nonlinear cubic-quintic Duffing oscillator based on the harmonic balance method. Results in Physics , 7 pp.3962-3967
2017 Microfluidic concentration gradient for toxicity studies of lung carcinoma cells. Procedia Technology , 27 pp.153-154
2017 Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network. Soft Computing pp.1-10
2017 An analytical approximation technique for the duffing oscillator based on the energy balance method. Italian Journal of Pure and Applied Mathematics , 37 pp.455-466
2016 A review of chemical absorption of carbon dioxide for biogas upgrading. Chinese Journal of Chemical Engineering , 24 (6) pp.693-702
2016 Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering , 3 pp.76-82
2016 Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC) pp.6-13
2016 Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE) , 18 (6) pp.1-4
2016 Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.410-414
2016 A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.331-336
2016 Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.297 -302
2016 A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research , 11 (4) pp.2364-2372
2016 An evaluation of heat loss on top of solar collector with multilayered absorber in solar water heating system. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.281-285
2016 A comparison study on the harmonic balance method and rational harmonic balance method for the Duffing-harmonic oscillator . Global Journal of Pure and Applied Mathematics , 12 (3) pp.2721-2732
2016 Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC) , 4 pp.1-7
2016 Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences , 4 pp.18-25
2016 A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics , 6 pp.496-504
2016 Prediction on Power Produced from Power Turbine as a Waste Heat Recovery Mechanism on Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling and Simulation in Engineering , 2016 pp.5072404-1-5072404-12
2015 Effect of organic loading rate (OLR) of slurry on biogas production quality. Advanced Materials Research , 1115 pp.325-330
2015 Performance evaluation of solar collectors using a solar simulator. IIUM Engineering Journal , 6 (2) pp.79-90
2015 Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal , 16 (2) pp.31-42
2015 The study on performance of naturally aspirated spark ignition engine equipped with waste heat recovery mechanism. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.10058-10065
2015 Application of CNT nanofluids in a turbulent flow heat exchanger. Journal of Experimental Nanoscience , 11 (1) pp.1-17
2015 Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience , 10 (7) pp.545-563
2014 Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science , 49 (13) pp.4544-4551
2014 Prediction of waste heat energy recovery performance in a naturally aspirated engine using artificial neural network. ISRN Mechanical Engineering pp.240942-1-6
2014 Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore , 26 (5) pp.2569-2575
2014 Geospatial analysis in monitoring land use encroahment into heritage site in Bujang Valley. Journal of Architecture, Planning and Construction Management , 4 (2) pp.77-91
2014 Smaller radiator with enhanced heat transfer using CNT-nanofluids. WIT Transactions on Engineering Sciences , 88 pp.185-191
2014 Corrosion effects of CNT-nanofluids on different metals. WIT Transactions on Engineering Sciences , 87 pp.139-146
2013 Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience pp.1-19
2013 Rain attenuation analysis using synthetic storm technique in Malaysia . IOP Conference Series: Materials Science and Engineering , 53 (Conf.1) pp.012045-1
2013 Academic performance measurement: capacity building for OIC-Affiliated Universities. International Journal of Information Technology & Computer Science , 12 (2) pp.67-74
2012 Use of porous alumina bioceramic to increase implant osseointegration to surrounding bone. Advanced Materials Research , 445 pp.554-559
2012 Muhammad Abduh’s contributions to modernity. Asian Journal of Management Sciences & Education (AJMSE) , 1 (1) pp.63-75
2012 Integrating and infusing of Islamic values in the existing engineering course subject: a case study. Advances in Natural and Applied Sciences , 6 (5) pp.625-632
2012 Thermal conductivity of carbon nanotube nanofluid—experimental and theoretical study. Heat Transfer—Asian Research , 41 (2) pp.145-163
2012 The foundation of science and technology in view of Muhammad Abduh . Asian Journal of Natural & Applied Sciences , 1 (2) pp.133-145
2011 Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS) , 18 (3) pp.227-244
2011 Exact solution for linear and nonlinear systems of PDEs by homotopy-perturbation method. Australian Journal of Basic and Applied Sciences , 5 (12) pp.3295-3305
2011 CFD studies on natural convection heat transfer of Al2O3-water nanofluids. Heat Mass Transfer , 47 (10) pp.1301-1310
2011 Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science , 1 (3) pp.131-137
2011 The effect of incorporating lithium fluoride on the compressive strength and diametric tensile strength of glass ionomer cement. Advanced Materials Research , 264 pp.508-512
2011 Stability and thermal conductivity enhancement of Carbon nanotube (CNT) nanofluid using gum Arabic . Journal of Experimental Nanoscience , 6 (6) pp.567-579
2010 Simulated mutagenesis to predict the mutational effect on the thermostability of Bacillus circulans xylanase. Research Journal of Chemistry and Environment , Specil (issue) pp.195-199
2010 Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics , 47 (1) pp.45-54
2010 Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study . Journal of Thermophysics and Heat Transfer , 24 (1) pp.165-172
2010 Engineering materials and manufacturing processes from Qur'anic perspective. Advanced Materials Research , 83-86 pp.834-841
2010 Engineering curriculum design and development. Australian Journal of Islamic Studies , 2 (1) pp.7-26
2010 Clean production of carbon nanomaterials to remove arsenic from drinking water. OIDA International Journal of Sustainable Development , 1 (7) pp.45-52
2010 Effect of radiation dose on the properties of natural rubber nanocomposite. Radiation Physics and Chemistry , 79 (12) pp.1279-1285
2010 Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing , 11 (5) pp.779-784
2009 Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B , 23 (6-7) pp.826-831
2009 Accuracy of Bhatnagaar-Gross-Krook scheme in solving laminar viscous flow problems. AIAA Journal , 47 (4) pp.885-892
2009 On the characteristics of multistage evacuated solar distillation. Renewable Energy , 34 pp.1471-1478
2009 Optimisation of arsenic adsorption from water by carbon nanofibers grown on powdered activated carbon impregnated with nickel.. Journal of Applied Sciences , 9 (17) pp.3180-3183
2009 In silico design in designing xylanase for biobleaching industry. Journal of Applied Sciences , 9 (17) pp.3184-3187
2008 Design and evaluation of a pressure-based typing biometric authentication system. EURASIP Journal on Information Security , 2008 pp.1-14
2007 Wavelet based noise removal from EMG signals. Informacije MIDEM: Journal of Microelectronics, Electronic Components and Materials , 37 (2) pp.94-97
2007 Handoff latency analysis of mobile IPv6 protocol variations. Computer Communications , 30 (4) pp.849-855
2007 Effectiveness of uncoated WC-Co and PCD inserts in end milling of aluminum silicon carbide (AlSiC) . Journal of Materials Processing Technology , 192-3 pp.147-158
2007 Effectiveness of cryogenic machining with modified tool holder. Journal of Materials Processing Technology , 185 (1-3) pp.91-96
2007 Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design , 28 pp.71-77
2006 An AI based self-moderated smart-home. Informacije MIDEM: Journal of Microelectronics, Electronic Components and Materials , 36 (2) pp.91-94
2006 Hardware realization of an efficient fetal QRS complex detection algorithm. WSEAS Transaction on Circuits and Systems , 5 (4) pp.575-581
2006 Comparative performance analysis of mobile IPv6 protocols: special reference to simultaneous bindings. Journal of Computer Sciences , 2 (2) pp.154-159
2006 Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys. Key Engineering Materials , 306/8 pp.893-898
2005 Effect of superheating temperatures on microstructure and properties of strontium modified aluminium–silicon eutectic alloy. Journal of Materials Processing Technology , 162/3 pp.312-316
2005 Theoretical and experimental investigation of a novel multistage evacuated solar still. Journal of Solar Energy Engineering , 127 (3) pp.381-385
2005 Employing a failure criterion with interaction terms to simulate the progressive failure of carbon-epoxy laminates. Journal - The Institution of Engineers, Malaysia , 66 (2) pp.6-14
2005 The effect of material property gradient on the fracture toughness of a PMMA/PC bimaterial with a crack normal to the interface. Journal of Applied Sciences , 5 (3) pp.476-481
2004 The effect of peroxyacetic acid treatment at elevated temperature onto the Indonesian coal microstructure. Science Letters , 1 (1) pp.1-7
2004 AntNet: a robust routing algorithm for data networks. International Islamic University Malaysia Engineering Journal , 5 (1) pp.1-12
2002 Experimental and numerical analysis of electronics heat sink. IIUM Engineering Journal , 3 (2) pp.17-32
2000 Prediction of the performance of a solar water detoxification system under Malaysian climatic conditions. Energy Conversion and Management , 41 (1) pp.1-12
2000 Numerical modelling of a multi-stage solar still. Energy Conversion and Management , 41 (11) pp.1107-1121
1997 Combustion processes of rice husks for energy. RERIC International Energy Journal , 19 (2) pp.63-75
1996 2-D and 3-D cellular models using erosion and dilation: model development. Malaysian Journal of Computer Science , 9 (1) pp.18-24
1996 Design modification of high speed diesel engine to accomodate compressed natural gas. RERIC International Energy Journal , 18 (1) pp.19-26

Conference or Workshop Item

2018 A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017
2018 A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017
2018 Analytical approximations for the oscillators with anti-symmetric quadratic nonlinearity. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17)
2017 Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences
2017 Connectivity, interoperability and manageability challenges in internet of things. In: The International Conference on Electrical and Electronic Engineering 2017 (IC3E 2017)
2017 Numerical study of heat transfer of embossed plate fined heat sink. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
2017 OIC movement for stronger political community. In: Towards the Renascence of Muslim Future Thinkers: Vision TN50 of Malaysia Forum 2017
2017 Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2017 Network Function Virtualization (NFV) based architecture to address connectivity, interoperability and manageability challenges in Internet of Things (IoT). In: 6th International Conference on Mechatronics - ICOM'17
2017 Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016
2017 Prediction of steam turbine performance as a waste heat recovery mechanism on naturally aspirated spark ignition engine using artificial neural network. In: 2016 3rd International Conference on Soft Computing & Machine Intelligence (ISCMI 2016 )
2016 Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016
2016 Biogas upgrading by chemical absorption using a packed column apparatus. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
2016 Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
2016 A simulation study for the upgrading of biogas using aqueous ammonia. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
2016 Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
2016 Serpentine microfluidic structures for concentration rradient generators. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP)
2015 Modelling of microfluidics network using electric circuits. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2015)
2015 Analysis of synthetic storm technique based on Ku-Band Satellite Beacon measurements in Malaysia. In: International Conference on Communication and Computer Engineering (ICOCOE 2014)
2015 A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. In: International Postgraduate Conference on Engineering Research (IPCER) 2015
2015 Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. In: International Postgraduate Conference on Engineering Research (IPCER) 2015
2015 Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015
2014 Effect of organic loading rate (OLR) of slurry on biogas production quality . In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
2014 Analysis of the synthetic storm technique using rain height models to predict rain attenuation in tropical regions. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2013 Biogas production by codigestion of fruit and vegetable wastes: organic loading rate (OLR) effect study. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01)
2012 Analysis of rain fade duration over satellite-earth path at Ku-Band in tropics. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Numerical simulation of thin-liquid film flow on inclined palne using implicit and explicit finite difference schemes. In: International Conference on Applied and Computational Mathematics (ICACM) 10th Anniversary of the Foundation of the Institute of Applied Mathematics (IAM)
2011 Investigation of a new porous glass ceramic for potential bone implant . In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 Remineralization effect of new type of glass ionomer based root canal sealer. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
2011 Design and performance of 20 watts portable solar generator . In: 1st InternationalConferenceonMechanicalEngineeringResearch2011(ICMER2011)
2010 Long wave instabilities of heated falling films: role of Van Der Waals attraction. In: XIVth International Conference Surface Forces
2010 Electron beam crosslinked natural rubber/multiwalled carbon nanotube nanocomposite. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Analytical treatment of system of linear and nonlinear PDEs by Homotopy-Perturbation method. In: World Congress on Engineering (WCE) 2010
2010 A modified algorithm for the homotopy perturbation method with applications to Lotka-Volterra systems. In: 6th IMT-GT Conference on Mathematics, Statistics and its Applications (ICMSA2010)
2010 Studies on heat transfer enhacement of CNT-GA nanofluid in a laminar flow heat exhanger. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 New glass Ionomer cement with boron. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2009 In silico approach in designing Xylanase for biobleaching industry. In: 3rd International Conference on Chemical & Bioprocess Engineering
2009 Solving linear system of partial differential equations by homotopy-pertubation method. In: 4th International Conference on Research and Education in Mathematics
2009 Comparing numerical methods for the solution of Cauchy reaction-diffusion problems. In: 4th International Conference on Mathematics and Statistics 2009
2009 Optimisation of arsenic adsorption from water by carbon nanofibres grown on powdered activated carbon impregnated with nickel . In: 3rd International Conference on Chemical and Bioprocess Engineering
2009 Ontology of manufacturing enginneering. In: 5th International Advanced Technologies Symposium (IATS'09)
2009 Investigation on tribological properties on strontium modified piston alloy under lubricated condition. In: International Conference on Advances on Materials and Processing Technologies (AMPT 2009)
2009 Selection of materials and manufacturing processes for green engineering. In: International Conference on Advances on Materials and Processing Technologies( AMPT 2009)
2009 Adsorption of chromium from water by carbon nanotubes grown on powdered activated carbon. In: International Conference on Sustainable Infrastructure and Built Environment in Developing Countries - SIBE,
2008 A gas-kinetic BGK solver for two-dimensional turbulent compressible flow. In: International Conference on Scientific Computing
2008 Natural convection heat transfer in nanofluids - a numerical study. In: Proceedings of the 7th Symposium on Transport Phenomenon in Manufacturing Processes 2008
2008 Effect of cooling rate on strength and fracture surfaces of alpha brass casting. In: 7th International Conference on Fracture and Strength of Solids, FEOFS 2007; Urumqi; China;
2008 Duststorm measurements for the prediction of attenuation on microwave signals in Sudan. In: International Conference on Computer and Communication Engineering (ICCCE08)
2008 The contribution of the faculty of engineering in Islamizing engineering studies. In: International Conference on Engineering Professional Ethics and Education (ICEPEE'08)
2006 Development of an efficient algorithm for fetal heart rate detection: a hardware approach. In: 5th WSEAS International Conference on Instrumentation, Measurement, Circuits and Systems, 2006
2006 High altitude platform for wireless communications and other services. In: 4th International Conference on Electrical and Computer Engineering
2006 Design of prototype expert system for transliterating Arabic-to-Roman words. In: 4th Student Conference on Research and Development 2006 (ScoreD2006)
2005 RSA with flexible key size: a hardware approach. In: International Conference on Robotics, Vision, Information and Signal Processing (ROVISP2005)
2005 Fetal QRS complex detection algorithm for FPGA implementation. In: International Conference on Computational Intelligence for Modelling, Control and Automation, and International Conference Intelligent Agents, Web Technologies and Internet Commerce (CIMCA-IAWTIC’05)
2004 Influence of higher order coupling terms in vibration analysis of anti-symmetric cross-ply composite plates. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004)
2004 Dynamic keystroke analysis using AR model. In: IEEE International Conference on Industrial Technology
2002 Free vibration analysis of laminated composite plates based on higher order shear deformation theory by using finite element method. In: Annual Workshop National Science Fellowship
2001 Enhanced user authentication through typing biometrics with artificial neural networks and k-nearest neighbor algorithm. In: Signals, Systems and Computers, 2001. Conference Record of the Thirty-Fifth Asilomar Conference on

Book

2011 Qur’anic values and engineering studies: approaches and methods in the process of Islamizing engineering curriculum. Pearson Malaysia Sdn.Bhd . ISBN 9789673490721 ; 967-3490-724
2011 Qur'anic values & engineering studies: approaches and methods in the process of Islamizing engineering curriculum. Pearson Malaysia Sdn. Bhd. . ISBN 9789673490721 / 9673490724
2009 Fundamentals of fluid mechanics. IIUM Press . ISBN 9789833855889

Book Section

2018 Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought IIUM Press, International Islamic University Malaysia . ISBN 978-967-491-010-5 , pp.152-166
2017 Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications CRC Press - Taylor & Francis Group . ISBN 9781138746299 , pp.19-32
2016 Drying of fruits and vegetables: The impact of different drying methods on product quality. In: Advances in Heat Pump-Assisted Drying Technology CRC Press . ISBN 978-1-4987-3499-8 , pp.189-215
2011 Al-Razi's contribution to the study of nexus between human mind and body. In: Contributions of Muslim Scientists to Medicine and Related Sciences IIUM Press . ISBN 978-967-418-155-0 , pp.39-44
2011 Ibn al-Jazzar on fever. In: Contributions of Muslim Scientists to Medicine and Related Sciences IIUM Press . ISBN 978-967-418-155-0 , pp.59-63
2011 Application of nanofluids as coolants in radiator . In: Advances in nanotechnology & its application IIUM Press . ISBN 9789670225876 , pp.1-13
2011 Carbon nanotube/rubber nanocomposites. In: Advances in nanotechnology & its application IIUM Press . ISBN 9789670225876 , pp.14-45
2011 CFD analysis of an evacuated solar still. In: Alternative energy IIUM Press . ISBN 9789674181581 , pp.156-162
2011 Experimental investigation of a multistage evacuated solar still. In: Alternative energy IIUM Press . ISBN 9789674181581 , pp.197-202
2011 Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials IIUM Press . ISBN 978-967-418-175-8 , pp.255-260
2011 Modelling of electronics heat sink – influence of the wake function generation on the accuracy of CFD analysis. In: Alternative energy IIUM Press . ISBN 9789674181581 , pp.203-212
2011 PCD inserts in end milling of Aluminum Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials IIUM Press . ISBN 9789674181758 , pp.253-257
2011 Oculist's contributions to cataract operation. In: Contributions of Muslim Scientists to Medicine and Related Sciences IIUM Press . ISBN 978-967-418-155-0 , pp.126-130
2011 Improving enzyme catalysis through the improvement of binding strength: simulated mutation to predict the mutational effect on Xylanase Cex . In: Current research and development in biotechnology engineering at IIUM (volume II) IIUM Press . ISBN 9789674181512 , pp.207-214
2011 Design and development of a lab scale bioreactor for heat inducible enzyme expression system. In: Current research and development in biotechnology engineering at IIUM IIUM Press . ISBN 9789674181444 , pp.211-218
2011 Developments on solar operated water desalination. In: Alternative energy IIUM Press . ISBN 9789674181582 , pp.163-168
2011 The contribution of Hassan al-Rammah to gunpowder and rocket technology. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies IIUM Press . ISBN 978-967-418-157-4 , pp.36-40
2011 The invention of the helium-neon gas laser by Ali Javan. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies IIUM Press . ISBN 978-967-418-157-4 , pp.160-164
2011 Contributions of Ibn Al-Haytham on optics. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies IIUM Press . ISBN 978-967-418-157-4 , pp.74-79
2011 Energy particle-physics : the efforts of Abdel Nasser Tawfic. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies IIUM Press , pp.80-85
2011 Contribution of Lofti Asker Zadeh to fuzzy logic. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies IIUM Press . ISBN 978-967-418-157-4 , pp.121-126
2011 Contribution of Tipu Sultan to rocket technology. In: Contributions of Early Muslim scientists to Engineering Sciences and Related Studies IIUM Press . ISBN 978-967-418-157-4 , pp.143-146
2011 Automation of pump test rig system. In: Mechatronics book series: Selected papers from ICOM '01, ICOM '05, and ICOM '08 IIUM Press . ISBN 9789670225685 , pp.3-16
2011 Finite element study of composite cones under axial compression loading. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.69-78
2011 Design and analysis of a solar still using finite element method. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.79-89
2009 Improvement of machinability of hard to machine materials by cryogenic cooling and job preheating. In: Proceedings of the seminar on research findings 2008 IIUM Press . ISBN 9789833855780 , pp.443-454
2009 The concept of Itqan and its role in Muslim professional life. In: Ethics of engineering education IIUM Press . ISBN 9789833855674 , pp.99-105
2005 Micro Electro Discharge Milling for Microfabrication. In: Micromachining In-Tech , pp.1-28