Faculties

Faculties

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Zuraida Bt. Ahmad
Associate Professor

Print CV Email Me

Staff Detail


Assoc. Prof. Ir. Dr. Zuraida Ahmad, a graduate of University Science Malaysia (USM), Pulau Pinang started her career as a research assistant in Ceramics Technology Laboratory, SIRIM, Shah Alam in 1992 before being offered a scholarship to further her study under Skim Latihan Anggota Baru (SLAB) by SIRIM in the same year to UMIST, Manchester. She was appointed as a Research Officer after she came back and two years later, in 1995, she was promoted to executive researcher in the same organization. Here, she handled some of the commercialized projects as Jitra Pot Water Filter, Halal Bone China ... show more

  • Doctor of Philosophy - Doctor of Philosophy, International Islamic University Malaysia
  • Master of Science - Masters Degree, The Victoria University of Manchester
  • Bachelor of Engineering in Material Engineering - Bachelor Degree, Universiti Sains Malaysia (USM)
  • Natural Science ~ Material Sciences ~ Polymeric Materials ~ Biopolymers - Starch-based polymers
  • Natural Science ~ Material Sciences ~ Polymeric Materials ~ Polymer Composites - Thermoplastic and biodegradable composites
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Nano Materials - Nanoclay composites
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Ceramics - Porcelain, Bonechina, Ceramic water filter and ceramic artificial bone (hydroxy apetite)
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Composite Materials - Filament winding, hands lay-up and compression moulding for both natural and synthetic fibers composites
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Lightweight Concrete - Lightweight clay concrete, Lightweight natural fiber concrete
  • 2010 - 2011 Committee, Persatuan Industri Komposit
  • 2010 - 2011 , Universiti Putra Malaysia
  • 1999 - -1 , Board of Engineers Malaysia (BEM-30598A)
  • 2010 - -1 , Institute of Engineers Malaysia (44106)
  • 2007 - -1 , Institute of Materials Malaysia (Professional Member - 3291)
ADVANCED MATERIALS CHARACTERIZATION 2007/2008 2012/2013
ADVANCED MATERIALS SCIENCE 2015/2016
CONTEMPORARY MATERIALS FOR ENGINEERING APPLICATIONS 2015/2016 2017/2018 2018/2019
ENGINEERING ETHICS FROM ISLAMIC PERSPECTIVE 2016/2017 2017/2018 2018/2019 2019/2020
ENGINEERING ETHICS SAFETY AND ENVIRONMENT 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020
ENGINEERING MATERIALS 2005/2006 2006/2007 2007/2008 2008/2009 2012/2013
FAILURE ANALYSIS OF MATERIALS 2012/2013
FINAL YEAR PROJECT I 2019/2020
FINAL YEAR PROJECT II 2019/2020
FUNDAMENTALS OF MATERIALS ENGINEERING 2016/2017 2017/2018 2018/2019 2019/2020
INTEGRATED DESIGN PROJECT 2013/2014 2014/2015 2015/2016 2016/2017 2018/2019
Integrated Design Project 2017/2018 2019/2020
MATERIALS CHARACTERIZATION 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015
MATERIALS LABORATORY 2006/2007 2007/2008
MATERIALS SCIENCE AND ENGINEERING 2012/2013
MECHANICS OF MATERIALS (LAB) 2004/2005
METALLIC MATERIALS 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012
SEMINAR 2005/2006
SEMINAR I 2009/2010
WORKSHOP TECHNOLOGY 2004/2005 2005/2006 2006/2007
In Progress
2018 - Present Development of self-healing nanocoating via polyelectrolyte assemblies for corrosion protection applications.
2018 - Present Poly (3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS) doped Silver Nano Particle (SNP)conductive polymer film for pressure ulcer prevention
2018 - Present Investigation On the Effectiveness of Various 'Green' Batik Wax Blends Extruded via Fused Deposition Modeling (FDM).
2018 - Present Investigation On the Effectiveness of Various 'Green' Batik Wax Blends Extruded via Fused Deposition Modeling (FDM).
2017 - Present Study On The Effect Of Cloisite 30B On The Antimicrobial Activities And Tissue Regeneration Of Starch Based Wound Healing Materials
2017 - Present Tribological Properties of Hybrid Composites based on Woven Carbon Fiber/Fine Kenaf Fabric Reinforced Epoxy Matrix for Automative Applications
2016 - Present Incorporating Qur'anic Terminology into Physics Textbook: Developing Ulu-Albab Thinking Mode in the Learning of Science
2016 - Present Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2016 - Present Novel Tactile Sensory Surface Mat with Electrical Stimulation (SMES)for the Prevention of Pressure Ulcers due to Immobility
2014 - Present Fundamental Mechanism and Activation of Nanoadd Zirconia Toughened Alumina (ZTA) Cutting Insert via the Addition of Carbon Nanotube (CNT) for Machining Super Alloy Inconel 718
2009 - Present Advanced Materials and Surface Engineering (AMSERU)
Completed
2016 - 2019 Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2016 - 2018 Incorporating Qur'anic Terminology into Physics Textbook: Developing Ulu-Albab Thinking Mode in the Learning of Science
2014 - 2018 Fundamental Mechanism and Activation of Nanoadd Zirconia Toughened Alumina (ZTA) Cutting Insert via the Addition of Carbon Nanotube (CNT) for Machining Super Alloy Inconel 718
2013 - 2016 Development of High Wear Resistent Nano Add ZTA Ceramic Cutting Insert for High Speed Machining Application
2013 - 2016 Characterisation and Dissolution Study of Novel Biodegradable Phosphate Based Glass for Biomedical Application
2012 - 2015 Prototype Development of Biodegradable Sago Based Sanitary Products
2012 - 2015 The Study of Biodegradable Metroxylon Rottb.(Sago)/Montmorillonite Nanoclay Superabsorbent Polymer (SAP)
2012 - 2014 Fabrication and Characterization of TiO2 Thin Films Electrode for Energy Generation
2010 - 2013 The study of PVC/alumina trihydrate nanocomposites for fire retardant-structural materials
2010 - 2013 Testing and evaluation of cassava starch as ceramic binder for investment casting
2010 - 2012 The development of the thermoplastic starch for biodegradable fabrics
2009 - 2011 The Effect of Electron Beam Radiation on Mechanical properties of HDPE/EPDM-Organo Montmorillonite Nanocomposites
2009 - 2017 Value Engineering - Link Up with Universities Program: Parts Distribution and Handover
2009 - 2012 The Study of Superabsorbent Biodegradable Hydrogels Developed from Natural Polymer for Sanitary Products
2008 - 2011 Development of porous TricalciumOhosohate (TCP) by Using Egg Yolk as pore Creating Agent
2007 - 2011 Development of In-House Ceramic Cutting Tools
2006 - 2009 Development of Environmental Friendly Super Bioadhesive For Structural Applications Using Egg Albumin As The Matrix Material
2006 - 2010 Formation of Surface Layer Coatings through Powder Preplacement and TIG Torch Melting Processes
25 March 2011 BEST TEACHER AWARD 2011. International Islamic University Malaysia - University level.
Article
2019 Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science , 15 pp.49-61
2018 Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology , 13 (Issue Special Issue on WRICET (2016)) pp.86-93
2018 Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology , 7 (4014) pp.339-342
2018 Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology , 1 (Special Issue 1) pp.403-409
2018 Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal , 19 (1) pp.185-196
2017 Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science , 29 (4) pp.485-492
2017 Effects of pressing temperature and pressing time onto the properties of binderless particleboard made from rattan furniture waste. Journal of Built Environment, Technology And Engineering (JBETE) , 3 pp.11-18
2016 A review of natural fibers and processing operations for the production of binderless boards. BioResources , 11 (2) pp.5600-5617
2016 Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC) pp.6-13
2016 Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC) , 4 pp.1-7
2016 Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences , 4 pp.18-25
2016 Optimization of natural fiber composite parameter using Taguchi approach . Advanced Materials Research , 1133 pp.185-188
2015 Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM) , 13 (2) pp.11-13
2015 Swelling properties of gamma irradiated starch based hydrogel dressing. International Journal of Innovative Science, Engineering & Technology , 2 (8) pp.933-936
2015 Characterization and preparation of sago starch (SS) based reinforced with silver nanoparticle (SNP) . Advanced Materials Research , 1115 pp.369-372
2015 Characterization of rattan waste for binderless particleboard (BPB) production. Advanced Materials Research , 1115 pp.317-320
2015 The effect of black liquor on rattan waste binderless board (BPB) produced via digestion-hot pressing (DHP) process . ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9753-9758
2015 Gamma irradiated starch based hydrogel impregnated with silver nanoparticle. Advanced Materials Research , 1115 pp.390-393
2015 Study of mechanical and flammability properties of polypropylene/microcrystalline cellulose composites filled with nano-sized aluminium hydroxide (ATH) particles. Advanced Materials Research , 1115 pp.402-405
2015 Mechanical and physical properties of sago starch/halloysite nanocomposite film. Advanced Materials Research , 1115 pp.394-397
2015 Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research , 1115 pp.275-278
2015 Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach . Advanced Materials Research , 1115 pp.238-242
2015 Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research , 1115 pp.166-169
2014 Evaluation of Kenaf Fibres Reinforced Starch Based Biocomposite Film through Water Absorption and Biodegradation Properties . Journal of Engineering Science , 10 pp.31-39
2014 Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology , 8 (3) pp.792-796
2014 Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals , 603 (1) pp.173-179
2014 Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals , 603 (1) pp.180-193
2014 Holly Qur'an: the key reference of materials. Science International Lahore , 26 (5) pp.2033-2035
2014 Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore , 26 (5) pp.2569-2575
2014 Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering , 53 pp.107-113
2014 Effect of kenaf fibre on starch based biopolymer composite. Advances in Environmental Biology , 8 (3) pp.765-769
2014 Preparation and characterization of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites and their hybrid composites with halloysite clay. Advances in Environmental Biology , 8 (3) pp.704-711
2013 The effects of initiator content on sago (metroxylon rottb.) starch-G-PAN hydrogel . Advanced Materials Research , 683 pp.218-221
2013 The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science , 24 (2) pp.97-115
2013 Low Density Polyethylene (LDPE)/ Thermoplastic Sago Starch (TPSS) blend Filled Kenaf Core Fiber (KCF). Advanced Materials Research , 626 pp.1048-1053
2012 Properties of montmorillonite-reinforced thermoplastic sago starch composites . Advanced Materials Research , 445 pp.469-474
2012 Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite . Journal of Thermoplastic Composite Materials , 25 (2) pp.153-164
2012 Integrating and infusing of Islamic values in the existing engineering course subject: a case study. Advances in Natural and Applied Sciences , 6 (5) pp.625-632
2012 Effect of fiber loading on properties of thermoplastic sago starch/kenaf core fiber biocomposites. BioResources , 7 (3) pp.4294-4306
2012 Morphological study of Superabsorbent polymer hydrogels from sago starch. Advanced Materials Research , 576 pp.338-341
2012 The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal , 19 (2) pp.715-719
2012 Rheological behavior and stability of cassava starch for ceramic mould binder application. Advanced Materials Research , 576 pp.162-165
2012 The study of glycerol plasticized thermoplastic sago starch. Advanced Materials Research , 576 pp.289-292
2012 Properties of sago starch-nanoclay biocomposites film. Advanced Materials Research , 576 pp.480-483
2011 Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal , 12 (1) pp.63-75
2011 Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials , 471-72 pp.403-408
2011 The effect of fiber content on cotton reinforced albumen composites . IIUM Engineering Journal , 12 (2)
2011 Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science , 1 (3) pp.131-137
2011 Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering , 42 pp.462-465
2011 Properties of compression moulding starch-nanoclay biocomposites. World Journal of Engineering , 8 (Supp.1) pp.1377-1378
2011 Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers , 8 (1) pp.14-26
2011 Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research , 265 pp.760-764
2011 The study of biodegradable thermoplastics sago starch. Key Engineering Materials , 471 pp.397-402
2011 Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials , 472-72 pp.928-932
2011 Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials , 471 pp.781-785
2011 Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical properties. Asia-Pacific Journal of Chemical Engineering , 6 pp.863-869
2011 Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal , 6 (1) pp.51-57
2010 Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering , 8 pp.1-7
2008 Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research , 47 pp.1189-1192
2007 Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design , 28 pp.71-77

Conference or Workshop Item

2018 Influence of fiber treatment on dimensional stabilities of rattan waste composite boards. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018)
2017 Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016
2017 Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2016 Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016
2016 Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
2016 Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
2015 Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015
2015 Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities
2014 Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique . In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014)
2014 Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014
2013 Creativity and the future of engineering education: making the strange familiar. In: International Conference on Engineering Education 2013
2012 Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012)
2011 Properties of compression moulding starch - nanoclay biocomposites . In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19)
2011 Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 Properties of montmorillonite-reinforced thermoplastic sago starch composites . In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 Integrating Tawhidi values into science and engineering education: a case study. In: International Conference on Islamization in Modern Science and Scientification of Islamic Studies: Prospects and Bridges
2011 Integrating and infusing of Islamic values in the existing engineering course subject: A case study . In: The 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11)
2011 The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
2011 The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC)
2011 Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite powder. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011
2011 Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
2011 Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
2011 Eco-friendly PLA-kenaf fibre biocomposite for food packaging . In: Malaysia Technology Expo (MTE 2011)
2010 An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010)
2010 Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Lightweight biodegradable cotton/albumen board (CAB) for sustainable environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM)
2010 Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition
2010 Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010)
2009 Effects of nanoclays on the structure and properties of cotton/albumen composites . In: 2nd Annual International Conference on Green Technology and Engineering

Book

Book Section

2018 Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought IIUM Press, International Islamic University Malaysia . ISBN 978-967-491-010-5 , pp.152-166
2012 Surface properties and thermal behavior of Malaysian coir fiber. In: Materials in Engineering in Health Sciences Universiti Sains Malaysia . ISBN 978-983-861-533-4 , pp.1-7
2011 Thermal and morphological study of Biopolymer Cotton-Albumen Clay (BCAC) composites. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.62-67
2011 Effect of compaction time on the properties of coir fiber reinforced cement-albumen composite. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.68-73
2011 Oil Palm Empty Fruit Bunch (OPEFB) for lightweight composites concrete . In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.74-79
2011 Investigation on the effect of water immersion on cotton albumen composite. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.178-181
2011 Sago, its properties and applications: a review. In: SAGO (Metroxylan rottb) and its applications IIUM Press . ISBN 9789674181635 , pp.1-15
2011 SEM analysis of coir fiber and coir fiber-albumen-concrete before and after surface treatments. In: Manufacturing management from basic machining to quality product IIUM Press . ISBN 9789674181659 , pp.220-229
2011 Sago starch: nanoclay biocomposites film. In: SAGO (Metroxylan rottb) and its applications IIUM Press . ISBN 9789674181635 , pp.87-99
2011 Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites . In: SAGO (Metroxylan rottb) and its applications IIUM Press . ISBN 9789674181635 , pp.101-114
2011 Comparative study between standard and commercial sago starch. In: SAGO (Metroxylan rottb) and its applications IIUM Press . ISBN 9789674181635 , pp.17-26
2011 The effect of fibre content on thermal property of coir fibre reinforced cement-albumen composite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.172-177
2011 Investigation on the effect of ultra violet on cotton albumen composite. In: Advances in materials engineering - Volume 2 IIUM Press . ISBN 9789674181680 , pp.96-99
2011 Workability of coir fibre-reinforced cement-albumen composite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.195-200
2011 The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.108-113
2011 An investigation of hybrid composites tubes subjected to quasi-static loading. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.138-143
2011 Foam impregnation method for artificial bone graft application : study on the effect of drying time. In: Advances in Materials Engineering - Volume 2 IIUM Press . ISBN 9789674181680 , pp.78-83
2011 Foam impregnation method for artificial bone graft application: study on the effect of sintering temperature. In: Advances in Materials Engineering - Volume 2 IIUM Press . ISBN 9789674181680 , pp.84-88
2011 Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.144-149
2011 Overview on Malaysia natural fibres and its applications . In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.1-19
2011 Mechanical behaviour of Oil Palm Empty Fruit Bunch (OPEFB) albumen-composites concrete. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.49-54
2011 Malaysian coir fibre for acoustical absorption cement composite panel . In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.39-48
2011 The influence of biopolymer and natural fiber on the physical and mechanical properties of cement composite. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.55-61