Faculties

Faculties

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Sheroz Khan
Professor

Print CV Email Me

Staff Detail


Sheroz Khan received his B Sc in Electrical Engineering from the N-W.F.P University of Engineering and Technology (NWF UET) Peshawar, Pakistan. Being the best graduate of the Department of Electrical Engineering in 1982, he was awarded the university scholarship (1988) to do M Sc in Microelectronic & Computer Engineering at Surrey University, UK. The timely accomplishment of his Mastera??s (1990) at Surrey was acknowledged by the NWFP UET Senate and they nominated him, under the British Council programme for further study at Strathclyde University, UK, where he completed his Ph.D the rejoi ... show more

  • PhD in Electric and Electrical Engineering - Doctor of Philosophy, University of Strathclyde
  • Master of Science in Microelectronics & Computer Engineering - Masters Degree, University of Surrey
  • Bachelor of Science in Electrical Engineering - Bachelor Degree, NWFP University of Engineering & Technology
  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Electrical
  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Electronics
  • 2019 - 2019 , IEEEAccess
  • 2019 - 2019 , UE Taxila Engineering Journal
  • 2019 - 2019 , IEEE
  • 2019 - 2019 , IEEE Transaction on Power Electronics
  • 2019 - 2019 , IEEE
BIOMEDICAL ELECTRONIC & SYSTEMS 2007/2008 2008/2009 2009/2010 2010/2011 2012/2013 2013/2014 2015/2016
CIRCUIT ANALYSIS 2006/2007 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020
CIRCUIT, SIGNALS AND FILTERS 2015/2016 2016/2017 2017/2018 2018/2019
CIRCUITS, SIGNALS AND FILTERS 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017
CIRCUITS, SIGNALS AND FILTERS 2006/2007 2007/2008
DATA STRUCTURES & ALGORITHMS DESIGN 2001/2002 2002/2003
DATABASE SYSTEM 2002/2003 2003/2004 2004/2005 2005/2006
DATABASE SYSTEM (LAB) 2003/2004
DISTRIBUTED DATABASE 2003/2004
ELECTRIC CIRCUITS 2001/2002 2002/2003 2003/2004 2004/2005 2005/2006 2006/2007 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020
ELECTRIC CIRCUITS (LAB) 2002/2003 2003/2004
ELECTRICAL AND COMPUTER ENGINEERING LAB I 2006/2007 2007/2008 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018
ELECTRICAL SYSTEM IN BUILDINGS 2008/2009 2009/2010 2016/2017
ENGINEERING ELECTROMAGNETIC 2012/2013 2015/2016
ENGINEERING LAB I 2006/2007 2007/2008
FINAL YEAR PROJECT I 2018/2019
INDUSTRIAL ELECTRONICS 2016/2017 2017/2018 2018/2019 2019/2020
MICROPROCESSORS & INTERFACING 2004/2005
NETWORK ANALYSIS AND SYNTHESIS 2006/2007 2007/2008 2008/2009
PROJECT I 2003/2004 2004/2005
PROJECT II 2003/2004 2004/2005 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN ECE 2016/2017 2017/2018 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN ECE (RESEARCH MODE) 2016/2017 2017/2018 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN ECE ENG (MIXED MODE) 2019/2020
RESEARCH METHODOLOGY AND SEMINAR 2017/2018 2018/2019 2019/2020
RESEARCH METHODOLOGY IN ELECTRICAL & COMP ENGINEERING 2016/2017
SEMINAR 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017
SEMINARS 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017
In Progress
2019 - Present Microfabrication of Microfluidic Channel that Mimic Blood Vessel in the Hand (IIUM - University of Limoges (France) Joint Collaboration Programme)
2018 - Present Interdigitated Electrode Patterning using Standard Photolithography and Wet Etching for Surface Acoustic Wave Sensor Based on ST Cut Quartz for Breath Analysis (IIUM - University of Limoges (France) Joint Collaboration Programme)
2018 - Present Development of Continuous-time Non-invasive Glucose Sensing System
2017 - Present Modeling Novel Maximum power point Tracking Algorithm for Small Scale Wind Turbine System
2017 - Present Fundamental study of blood glucose solution models using a novel stepped impedance RF sensor for improved continuous monitoring of diabetic patients
2016 - Present Development, Testing and Field Evaluation pf Physical Intrusion Detection Alarm-cum-Office/Home Automation System Utilizing Radio Frequency Signals Energy for Indoor Environment Use
2016 - Present Modelling and Optimisation of Stepped Waveform Generation for Multilevel Inverters Topology Applications
2016 - Present Development of Novel Algorithm using Features of Respiratory Sounds Abnormalities for Detection of Lung Cancer
2015 - Present Optimizing Dual-Loop Optical Microfiber Sensor Structure for Humidity Monitoring
2015 - Present Proposing with Analysis a Multi-Level Inverter Using Optimized Pulse-Width-Modulation Approach with Reduced Harmonics and Switching Losses
2009 - Present VSLI and MEMS Research Unit
2009 - Present VSLI and System Design Research Unit
Completed
2015 - 2017 Optimizing Dual-Loop Optical Microfiber Sensor Structure for Humidity Monitoring
2014 - 2016 Design and Development of Portable Classroom Attendance System Based on Fingerprint Biometric
2014 - 2017 Predicting Mental States of Human Brain using Spatiotemporal Multi-Voxel Pattern Recognition
2013 - 2017 Exploration on CMOS Capacitance Based Structural Health Monitoring by Energy Harvested Wireless Sensor Networks
2013 - 2015 Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates
2013 - 2016 Development of Novel Wireless Sensor Networks(WSNs) for Smart Grid Low Voltage Distribution Automation System (LVDAS)
2012 - 2015 Design and Development of Autonomous Assistive Devices using EMG Signal for Functional Rehabiliation
2012 - 2015 Robust adaptive control of nonlinear system application to flight control system
2012 - 2015 Measurement of EMG Signal for the Correct Identification of Human Postures
2012 - 2012 Ultra-Wide-Band Modulation (UWB) Modulation Techniques For Signal Extraction From Biomedical Implants
2012 - 2013 Design of IR-UWB Pulse Generator for 802.11a & WIMAX Interference Avoidance
2011 - 2013 Hardware Prototyping of Photoplethysmography Based Cardiac Monitoring Technique for Devising a Practical Remote Health Monitor
2011 - 2015 Novel Vertically Integrated Nano GHz Surface Acoustic Wave Oscillator for RF Applications
2010 - 2011 Modeling and Characterization of Magnetic materials at low Frequencies for Nano-sensor fabrication
2010 - 2012 Design and Implementation of a Smart Mobile Phone Jammer
2009 - 2011 Development of Rain Fade Data Acquisition and Analysis System for MEASET3 Satellite Beacon
2009 - -1 Sigma-to-beta Converter Analysis, Simulation and Experimental Details.
2009 - 2014 Development of Intelligent Automation System for Low voltage users.
2009 - 2012 Modeling of a Novel Integrated Surface Acoustic Wave Resonator
2009 - 2011 Design of Capacitance Voltage Converter for Development of High Frequency Band Sensor Transducer for Capacitive Measuring Systems
2009 - 2012 Development of an Emergency Medical Care System for Cardiac Telemedicine Monitoring
2009 - 2011 Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2008 - 2016 Vision-based Road Detection for Autonomous Intelligent Vehicles
2008 - 2010 Wireless Data Acquisition for Monitoring of Civil Structures with Embedded Sensors - Experimental Results
2008 - 2011 Fade Dynamics Modeling for Earth-Satellite links at Ku-Band in Malaysia
2008 - 2010 Characterization of Indoor Powerlines As Data Channels- Experimental Details and Results
2007 - 2009 Characterization of Direct Sensor-to-Microcontroller Interfacing
2007 - 2009 Vision-Based Road Detection for Autonomous Intelligent Vehicle
2006 - 2009 Antenna Design using Advanced Materials for Wireless Communications
2006 - 2011 Development of Finite Field Polynomial Representation for Encoding and Decoding Operations of Low Density Parity Cheek Codes
Article
2019 Investigation of lower limb’s muscles activity during performance of salat between two age groups. Indonesian Journal of Electrical and Computer science , 14 (2) pp.608-617
2019 Design and parametric evaluation of UWB antenna for array arrangement. Bulletin of Electrial Engineering and Informatics , 8 (2) pp.644-652
2019 A novel optimization harmonic elimination technique for cascaded multilevel inverter. Bulletin of Electrical Engineering and Informatics , 8 (2) pp.405-413
2019 Motion capture sensing techniques used in human upper limb motion: a review. Sensor Review pp.1-9
2019 Cyber attacks analysis and mitigation with machine learning techniques in ICS SCADA systems. Journal of Advanced Research in Dynamical and Control Systems , 11 (1) pp.180-188
2018 Resonant configuration topology exploration for inductive link power transfer. Indonesian Journal of Electrical Engineering and Computer Science , 11 (2) pp.522-530
2018 Capacitive sensing algorithm for elderly activity detection scheme indoor environment. Indonesian Journal of Electrical Engineering and Computer Science , 11 (2) pp.515-521
2018 Non-contact capacitive technique for biomass flow sensing. Indonesian Journal of Electrical Engineering and Computer Science , 11 (2) pp.531-541
2018 Wide range modulation indexes featuring carrier-based PWM stepped waveform for half-bridge modular multilevel converters. IIUM Engineering Journal , 19 (2) pp.1-231
2018 General analysis of resonance coupled wireless power transfer (WPT) using inductive coils. Technical Gazette=Tehnicki Vjesnik , 25 (3) pp.720-726
2018 Verification of quartz crystal microbalance array using vector network analyzer and openQCM. Indonesian Journal of Electrical Engineering and Computer Science , 10 (1) pp.84-93
2018 Coil geometry models for power loss analysis and hybrid inductive link for wireless power transfer applications. Sadhana - Academy Proceedings in Engineering Sciences , 43 (5) pp.1-11
2018 Design and optimization of ultra-wideband antipodal vivaldi antenna for radar and microwave imaging application. Sindh University Research Journal (Science Series) , 50 (3D) pp.6-9
2018 High gain UWB horn antenna for concealed metal detection and microwave imaging application. Sindh University Research Journal (Science Series) , 50 (3D) pp.161-164
2018 A proposed resistance-to-time converter with switching impulse calibrators for application in resistive bridge sensors. Indonesian Journal of Electrical Engineering and Computer Science , 11 (1) pp.47-50
2018 Recognition of metal objects inside wall using antipodal vivaldi antenna. Indonesian Journal of Electrical Engineering and Computer Science , 11 (1) pp.27-35
2018 Recognizing foreign Object Debris (FOD): False alarm reduction implementation. Indonesian Journal of Electrical Engineering and Computer Science , 11 (1) pp.41-46
2018 Black phosphorus saturable absorber for pulse generation using Q-switched teachnique. Indonesian Journal of Electrical Engineering and Computer Science , 11 (1) pp.36-40
2017 The combination of Newton-raphson method and curve-fitting method for PWM-based inverter. International Journal of Power Electronics and Drive System , 8 (4) pp.31-43
2017 Resilient IEEE802.15.4MAC Protocol for Multi-Hop Mesh Wireless Sensor Network. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 9 (3-10) pp.71-77
2017 A study on controllable aluminium doped zinc oxide patterning by chemical etching for MEMS application. Microsystems Technologies , 23 (9) pp.3851-3862
2017 Reduction of cavity length dependence and improvement of characteristics of 1.55 µm quantum dot based LASER using Indium Nitride. Journal of Optoelectronics and Advanced Materials , 19 (5-6 (May-June)) pp.298- 302
2017 Development of wireless power transfer system using resonance principle with security features. IIUM Engineering Journal , 18 (2) pp.117-127
2017 Passively Q-switched erbium-doped fiber laser based on graphene oxide as saturable absorber. Journal of Optical Communications , 37 pp.01-04
2017 Predictive control of AC/AC matrix converter. International Journal of Power Electronics and Drive System (IJPEDS) , 8 (4) pp.1932-1942
2017 Leakage current energy harvesting application in a photovoltaic (PV) panel transformerless inverter system. The Korean Institute of Electrical and Electronic Material Engineers , 18 (4) pp.190-194
2017 Q-switched erbium-doped fibre laser based on molybdenum disulfide and tungsten disulfide as saturable absorbers. Ukrainian Journal of Physical Optics , 18 (1) pp.20-27
2017 Improvement of temperature dependence of carrier characteristics of quantum dot solar cell using InN quantum dot. International Journal of Renewable Energy Research , 7 (1) pp.330-335
2017 A comparative analysis of the effect of temperature on band-gap energy of gallium nitride and its stability beyond room temperature using a Bose–Einstein model and Varshni'S model. IIUM Engineering Journal , 18 (2) pp.151-157
2017 Bedroom monitoring system for isolated elderly people and patients. Asian Journal of Pharmaceutical Research and Health Care , 9 (3) pp.131-137
2017 Analysis of mutual inductance and coupling factor of inductively coupled coils for wireless electricity. ARPN Journal of Engineering and Applied Sciences , 12 (13) pp.4007-4012
2017 Real time telemedical health care systems with wearable sensors. Asian Journal of Pharmaceutical Research and Health Care , 9 (3) pp.138-144
2017 An adiabatic silica taper based on two sequential tapering routines. Journal of Optoelectronics and Advanced Materials , 19 (9-10) pp.567-574
2016 A qualitative analysis of biomass flow sensing behavior using capacitive technique. IIUM Engineering Journal , 17 (1) pp.29-40
2016 Optimizing tapered microfiber sensor design and simulation. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.449-452
2016 Low value capacitance measurement system for the application of monitoring human body. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.327-330
2016 Fingerprint biometric systems. Trends in Bioinformatics , 9 (2) pp.52-58
2016 Travel angle control of quanser bench-top helicopter based on quantitative feedback theory technique. Indonesian Journal of Electrical Engineering and Computer Science , 1 (2) pp.310-318
2016 Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.362-367
2016 Possibility of using interdigital sensor (IDS) in estimating different level of blood glucose. Sindh University Research Journal (Science Series) , 48 (4D) pp.209-212
2016 Analysis on the effect of stimulator parameters in electrical stimulation procedure on the human bicep muscle. Jurnal Teknologi , 78 (7-5) pp.15-22
2016 Efficient capacitance sensing for wireless health monitoring system.. IIUM Engineering Journal , 17 (2) pp.21-29
2016 Non-intrusive monitoring of everyday behavioral activities in an indoor environment. Journal of Electronic Science and Technology , 14 (3) pp.205-210
2016 Flat-gain wide-band erbium doped fiber amplifier with hybrid gain medium. Optik , 127 (5) pp.2481-2484
2016 Sugeno inference system for estimating non-linear characteristics in smart sensor applications. Sindh University Research Journal (Science Series) , 48 (4(D)) pp.157-160
2016 Effects of switching frequency to series loaded series resonant circuit. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.382-386
2016 An efficient technique for retinal vessel segmentation and denoising using modified isodata and CLAHE. IIUM Engineering Journal , 17 (2) pp.31-46
2016 Daily activity monitoring of an elderly Person for determining their wellness. International Journal of Smart Home , Vol. 10 (8) pp.339-346
2016 Survey on relational database watermarking techniques. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.421-432
2015 Mode-locked 2μm fiber laser with a multi-walled carbon nanotube as a saturable absorber . Chinese Optics Letters , 13 (3) pp.030602-1
2015 Robust control of bench-top helicopter using quantitative feedback theory. TELKOMNIKA Indonesian Journal of Electrical Engineering , 14 (3) pp.500-507
2015 Obtaining hysteresis loops at low frequency for characterization of materials to be used in biomedical applications. IIUM Engineering Journal , 16 (1) pp.19-32
2015 Flat-gain wide-band erbium doped fiber amplifier by combining two difference doped fibers. Journal of the European Optical Society , 10 pp.15015-1
2015 Leakage current paths in PV transformer-less single-phase inverter topology and its mitigation through PWM for switching. International Journal of Power Electronics and Drive System , 6 (1) pp.148-159
2015 Performance comparisons between PID and adaptive PID controllers for travel angle control of a bench-top helicopter. International Journal of Electronics, Electrical and Communication Engineering , 9 (1) pp.35-40
2015 Reinforcement learning based techniques in uncertain environments: problems and solutions. International Journal of Applied Engineering Research , 10 (8) pp.20055-20066
2015 Design of dual band notched ultra wideband antenna using (U-W) shaped slots. ARPN Journal of Engineering and Applied Sciences , 10 (23) pp.17375-17379
2015 A DC-DC circuit using boost converter for low voltage energy harvesting application. American Journal of Applied Sciences , 12 (4) pp.272-275
2015 Passively Q-switched fiber lasers using a multi-walled carbon nanotube polymer composite based saturable absorber. Optik International Journal for Light and Electron Optics , 126 (21) pp.1950-2954
2015 Medium voltage range energy harvester application using boost converter. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9744-9747
2015 On the issue of fly-back spikes in PWM operated single-phase transformer-less grid-tied inverter. MAGNT Research Report , 3 (5) pp.1-5
2014 LM555 timer-based inverter low power pure sinusoidal AC output. World Applied Sciences Journal , 30 pp.141-143
2014 Current Loss Comparison of PWM Operated Transformer-Based and Transformer-Less Inverter. International Journal of Advanced Research in Electronics and Communication Engineering (IJARECE) , 3 (3) pp.343-346
2014 All-fibre dual-wavelength thulium-doped fibre laser based on spatial filtering effect. Ukrainian Journal of Physical Optics , 15 (2) pp.79-83
2014 Computer-aided tuberculosis detection in chest radiographs: a review. Electrical & Computer Engineering: An International Journal (ECIJ) , 3 (4) pp.1-14
2014 A hybrid logarithmic gradient algorithm for poisson noise removal in medical images. Advanced Studies in Biology , 6 (4) pp.181-192
2014 Analysis and evaluation of differential inductive transducers for transforming physical parameters into usable output frequency signal. International Journal of Physical Sciences , 9 (15) pp.339-349
2014 Analysis of carbon nanotube device physics . American Journal of Nano Research and Application , 2 (6) pp.112-115
2014 DC-DC boost converter for grid-tied renewable energy generation systems. World Applied Sciences Journal , 30 pp.144-147
2014 Small band-gap-based CNT for modeling of nano sensor. Procedia Computer Science , 42 pp.122-129
2014 A study on health monitoring system: recent advancements. IIUM Engineering Journal , 15 (2) pp.87-99
2013 A comparative study of small voltage rectification circuits for implanted devices. IOP Conference Series: Materials Science and Engineering , 53 (1) pp.1-9
2013 Optimization of wireless power transmission for two-port and three-port inductive link. IOP Conference Series: Materials Science and Engineering , 53 (1) pp.1-12
2013 Design and Development of a Simulator for Modelling Carbon Nanotube. IOP Conference Series: Materials Science and Engineering , 53(1) (012049) pp.1-6
2013 Investigation on carbon nanotube electronics structure . Pensee Journal , 75 (11) pp.123-129
2013 A q-switched thulium-doped fiber laser with a graphene thin film based saturable absorber. Laser Physics , 23 (11) pp.1-5
2013 A Q-Switched thulium-doped fiber laser with a graphene thin film-based saturable absorber. Laser Physics (International Journal) , 23 (11) pp.1-5
2013 Robust real-time IEEE802.15.4 MAC protocol in multi-hop mesh network for distribution smart grid-AMI. International journal of Engineering and Computer Science IJECS-IJENS , 13 (4) pp.1-8
2013 Optimal throughput and self-adaptability of robust real-time IEEE 802.15.4 MAC for AMI Mesh network . IOP Conference Series: Materials Science and Engineering , 53 (Conf.1) pp.012091-1
2013 An investigation of fatigue phenomenon in the upper limb muscle due to short duration pulses in an FES system. IOP Conference Series: Materials Science and Engineering , 53 (012067) pp.1-8
2013 A qualitative review for wireless health monitoring system . IOP Conference Series: Materials Science and Engineering , 53 (1) pp.1-7
2013 Inductive loops for sensing position as signature signals. IOP Conference Series: Materials Science and Engineering , 53 pp.1-11
2013 High quality acquisition of surface electromyography – conditioning circuit design. IOP Conference Series: Materials Science and Engineering , 53 pp.1-7
2013 Transforming human gait for signature signals characterization. Materials Science and Engineering , 53 pp.1-7
2012 Optical amplifier with flat-gain and wideband operation utilizing highly concentrated erbium-doped fibers. Journal of Nonlinear Optical Physics and Materials , 21 (1)
2012 Development of a 2-digit multi valued analog-to-digital converter. World Applied Sciences Journal , 17 (5) pp.622-625
2012 Design of a multiple valued logic analog to digital converter using 0.13μm CMOS process. Science Series Data Report , 4 (3) pp.(1-8)
2012 Wideband and compact erbium-doped fiber amplifier using parallel double-pass configuration. Microwave and Optical Technology Letters , 54 (3) pp.629-637
2012 Wideband and flat-gain amplifier based on high concentration erbium-doped fibres in parallel double-pass configuration. Quantum Electronics , 42 (3) pp.241-243
2012 Modelling and control of laboratory scale conveyor belt type grain dryer plant . Journal of Food, Agriculture & Environment , 10 (2) pp.1384-1388
2011 Design and implementation of potentiometer-based nonlinear transducer emulator. IIUM Engineering Journal , 12 (1) pp.77-87
2011 An investigation of soft magnetic and non magnetic materials under low frequency. IIUM Engineering Journal , 12 (6) pp.59-70
2011 Review of erbium-doped fiber amplifier. International Journal of the Physical Sciences , 6 (20) pp.4674-4689
2011 Design of a multi valued current mode comparator. Australian Journal of Basic and Applied Sciences , 5 (10) pp.662-666
2011 Vision based road lane detection system for vehicles guidance. Australian Journal of Basic and Applied Sciences , 5 (5) pp.728-738
2011 Highly sensitive timer-based resistance deviation to time converter. IIUM Engineering Journal , 12 (6) pp.33-43
2011 A novel wide-band dual function fiber amplifier. International Journal of Physical Sciences , 6 (5) pp.1118-1126
2010 Design of capacitance to voltage converter for capacitive sensor transducer. American Journal of Applied Sciences , 7 (10) pp.1353-1357
2010 Fade margin analysis due to duststorm based on visibility data measured in a desert. American Journal of Applied Sciences , 7 (4) pp.551-555
2010 Prediction of signal attenuation due to duststorms using mie scattering. IIUM Engineering Journal , 11 (1) pp.71-87
2009 Design of multi-valued quaternary based analog-to-digital converter. American Journal of Applied Sciences , 6 (8) pp.1522-1527
2009 Tunable bandpass filter using RF MEMS switches. IIUM Engineering Journal , 10 (2) pp.69-80
2009 Effects of MEMS material on designing a multi-band reconfigurable antenna. Iranian Journal of Electrical and Computer Engineering , 8 (2) pp.112-118
2009 Characterization of indoor power lines as data communication channels experimental details and results. International Journal of Electrical and Computer Engineering , 4 (10) pp.647-651
2009 Microelectrical mechanical systems switch for designing multi-band antenna. Journal of Computer Science , 5 (7) pp.479-486
2008 Rule-based fuzzy logic controller with adaptable reference. International Journal of Electrical and Computer Engineering , 3 (1) pp.7-11
2008 Design of a planar structure of multifrequency patch antenna. IJCSES International Journal of Computer Sciences and Engineering Systems, , 2 (3) pp.207-211
2008 Capacitive transducer circuits for liquid level measurement. International Journal of Computer Sciences and Engineering Systems , 2 (3) pp.195-197
2008 Analysis and implementation of nonlinear transducer response over a wider response range. Sensors & Transducers Journal , 89 (3) pp.61-70
2008 A context transfer-based approach to enhance mobility support in multicast. International Journal of Computer Science and Security , 2 (4) pp.9-17
2008 Design and implementation of an optimal fuzzy logic controller using genetic algorithm. Journal of Computer Science , 4 (10) pp.799-806
2007 Malaysian vehicle license plate recognition. The International Arab Journal of Information Technology , 4 (4) pp.359-364
2007 A high accuracy measurement circuit for soil moisture detection. World Academy of Science, Engineering and Technology , 1 (11) pp.947-950

Conference or Workshop Item

2019 Augmented reality application for architects and interior designers: interno a cost effective solution. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA)
2019 Delay analysis of two-way synchronization scheme for phasor measurement unit based digital smart grid applications. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA)
2019 The effect of different light treatments on nutrient concentration and leaf exchange in Brassica Chinensis. In: 5th IEEE International Conference on Smart Instrumentation, Measurement and Application (ICSIMA 2018)
2018 Comparative analysis of UWB balance Antipodal Vivaldi Antenna for array configuration. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018)
2018 Solid waste management in Korangi District of Karachi using GPS and GIS: a case study. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018
2018 Inductive resonant power transfer and topology consideration. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017
2018 Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Beaming of inductive field with an asymmetric four-coil resonator for wireless power transfer. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018
2018 Foreign objects debris (FOD) identification: a cost effective investigation of FOD with less false alarm rate. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Inductive & capacitive wireless power transfer system. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018
2018 A comparison between solar thermal and photovoltaic/thermal (PV/T) systems for typical household in Libya. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017
2018 Simulation and practical implementation of a SEIG used in wind energy systems with rectified output voltage. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017
2018 Simulation and experimental verification of PID controlled DC/DC buck converter in wind energy conversion system. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017
2018 Design and analysis of 1-to-4 Wilkinson power divider for antenna array feeding network. In: 2018 IEEE International Conference on Innovative Research and Development (ICIRD)
2018 Inter-digital sensor for non-invasive blood glucose monitoring. In: 2018 IEEE International Conference on Innovative Research and Development (ICIRD 2018)
2018 Maximum allowable delay bound estimation using Lambert W function. In: IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT)
2018 Control of master-slave microgrid based on CAN bus. In: 2017 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies, AEECT 2017
2018 The implementation of IoT based smart refrigerator system. In: 2nd International Conference on Smart Sensors and Application, ICSSA 2018
2018 Techno-commercial feasibility of grid-tied solar system in philips morris pvt ltd (commercial building) of Pakistan. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Simple capacitive floor occupancy sensor for determining the pattern of a walking person. In: "4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017"
2018 Single Supply Differential Capacitive Sensor with Parasitic Capacitance and Resistance Consideration. In: 7th International Conference on Computer and Communication Engineering 2018 (ICCCE 2018)
2018 Compact multiband microstrip patch antenna with slot-rings for wireless applications. In: 15th IEEE Student Conference on Research and Development, SCOReD 2017
2018 Simulation of RF patch antenna sensor for biological applications. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018
2018 Analysis of the frequency dependency to the single supply differential capacitive sensor. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018
2018 A proposed resistance-to-time converter with switching impulse calibrators for resistive bridge sensors. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Input-series output-parallel full-bridge DC-DC converter for high power applications. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017
2018 Experimental verification and simulation of two stages positive output cascade boost converter super-lift DC/DC Luo-converter. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017
2018 On quality energy management in a third world country: the case study of war torn Libya. In: 22nd International Conference on ISO & TQM (22-ICIT)
2018 Exploring resonant configuration topology for inductive link power transfer. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Optimized RC timing technique for accurate measurement of minute capacitance changes. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017
2018 Capacitive proximity floor sensing system for elderly tracking and fall detection. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Analysis on smart waste management in Malaysia. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018
2018 Modulation indices embedded carrier-based PWM generation for modular multilevel converter. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018
2018 Detection and analysis of metal impairment inside wall using UWB modified antipodal vivaldi antenna. In: 2017 4th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS)
2018 Improved radiation characteristic of balanced antipodal vivaldi antenna in array configuration. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018
2018 Simulation analysis for maximizing renewable solar energy to improve the power generation capacity in the state of Kuwait. In: 2017 IEEE 3rd International Conference on Engineering Technologies and Social Sciences (ICETSS)
2018 Effect of duty cycle on THD for multilevel inverter based on selective harmonic elimination technique. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018)
2018 Frequency reliant wireless power transfer link for a applications of mWatts devices. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE)
2018 Finger-worn assistive device for detection tracking and recognition. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018
2017 The combination of Newton-Raphson method and curve-fitting method for PWM-based inverter. In: International Conference on Electrical and Electronic Engineering 2017 (IC3E2017)
2017 Assessing the solid mass flow sensing behaviour through capacitive sensing technique. In: 14th Student Conference on Research and Development, IEEE (SCOReD 2016)
2017 Harmonics elimination based on curve fitting method for modular multilevel converters. In: IEEE Region Ten Conference (Tencon) 2017
2017 Black phosphorus saturable absorber for Q-switched technique pulse generation. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017
2017 A novel multilevel DC - AC converter from green energy power generators using step-square waving and PWM technique. In: International Technical Postgraduate Conference 2017, Tech-Post 2017
2017 Low spikes and low harmonic distortion multilevel inverter for induction motor implementation. In: 2017 IEEE Industry Applications Society Annual Meeting
2017 High gain UWB horn antenna for concealed metal detection and microwave imaging application. In: 3rd International Conference on Engineering, Technologies and Applied Sciences 2017 (ICETAS-2017)
2017 Wireless power transmission - exploring source to load inductive link under resonance and varying load condition. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 A comparative study between SPWM and SHE-PWM modulation techniques for DC-AC inverters. In: IEEE 3rd International Conference on Engineering, Technologies and Social Sciences 2017 (ICETSS-2017)
2017 Analytical investigation of step-square wave in time and frequency domain using transform equations. In: International Technical Postgraduate Conference 2017, Tech-Post 2017
2017 Hybrid of conical and spiral approach for wireless power transfer. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Selective harmonics elimination technique in single phase unipolar H -bridge inverter. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Development of renewable energy potential in Kuwait. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Current behavior analysis of the single supply differential capacitive sensing. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Analytical model of Kuwait power consumption. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Wireless communication techniques, the right path to smart grid distribution systems: A review. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Design of simple DC-to-DC wireless power transfer via inductive coupling. In: Third IEEE International Conference On Advances in Electrical, Electronics, Information, Communication and Bio Informatics AEEICB – 2017
2017 Single supply differential capacitive sensor with energy harvester compatibility. In: 2016 IEEE Industrial Electronics and Applications Conference (IEACon)
2017 Ultra-wideband antipodal vivaldi antenna for radar and microwave imaging application. In: IEEE 3rd International Conference on Engineering, Technologies and Social Sciences 2017 (ICETSS-2017)
2017 A capacitive proximity sensing scheme for human motion detection. In: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)
2017 Design and development of wireless PPG data acquisition for health monitoring application using bluetooth module. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2016 QoS downlink schedulers in LTE towards 5G network. In: 12th IEEE Malaysia International Conference on Communication (MICC 2015)
2016 Space cooling load monitoring system with IoT. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA)
2016 An activity monitoring system for senior citizens living independently using capacitive sensing technique. In: Conference Record - IEEE Instrumentation and Measurement Technology Conference
2016 Poincare based PPG signal analysis for varying physiological states. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Capacitance-to-voltage converter design to measure small change in capacitance produced by human body movement. In: IEEE International WIE Conference on Electrical and Computer Engineering, WIECON-ECE 2015
2016 Application of UWB wireless MIMO connectivity inside modern aircraft. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Health and wellness monitoring of elderly people using intelligent sensing technique. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016)
2016 Capacitance sensing and energy harvesting for wireless health monitoring system. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Effect of modulation index of pulse width modulation inverter on total harmonic distortion for sinusoidal. In: International Conference on Intelligent Systems Engineering
2016 Modulation optimization effect on total harmonic distortion of single phase H-bridge inverter based selective harmonics E limination technique. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016)
2016 A study of touching behavior for authentication in touch screen smart devices. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Device discovery and configuration scheme for Internet of things. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Wireless capacitor sensing for structural health monitor. In: World Congress on Engineering 2016
2016 Adaptive load balancing algorithm for wireless distributed computing networks. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Real time monitoring system for upper arms rehabilitation exercise. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2015)
2016 Resonant coils analysis for inductively coupled wireless power transfer applications. In: 2016 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2016)
2016 Simulation of magnetophoretic blood cells sorter platform. In: The 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14)
2016 Stepped waveform generation for multilevel inverter topology applications. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016)
2015 Health monitoring system using pulse oximeter with remote alert. In: International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, 2015
2015 QOS downlink schedulers in LTE towards 5G network. In: The 12th IEEE Malaysia International Conference on Communications (MICC 2015)
2015 High frequency CNTFET-based logic gate. In: 10th IEEE 2015 Regional Symposium on Micro and Nanoelectronics (RSM 2015)
2015 Respiratory Rate (RR) based analysis of PPG signal for different physiological conditions. In: 2015 International Conference on Smart Sensors and Application (ICSSA)
2015 Spectrum analysis of physiological signals of human activities. In: 2015 International Conference on Emerging Technologies (ICET)
2015 Passive monitoring techniques for elderly: a review on recent development and prospective. In: World Congress on Engineering and Computer Science 2015
2015 Parametric sweep analysis of medium voltage range boost converter for energy harvester application. In: 2015 IEEE International WIE Conference on Electrical and Computer Engineering (WIECON-ECE)
2015 Development of a photoplethysmography signal processing method for oxygen measurement concentration. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2015 A low cost capacitive sensing system for identifying and detecting falls of senior citizens. In: 2015 IEEE 3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2015 DIBL and subthreshold swing effect on carbon nanotube field effect transistor. In: World Congress on Engineering (WCE 2015)
2015 NEGF-based transport phenomena for semiconduncting CNTFET. In: 2015 5th National Symposium on Information Technology: Towards New Smart World (NSITNSW)
2015 A low cost capacitive sensing system for monitoring and detecting falls of senior citizens. In: 2015 IEEE 3rd International Conference on Smart Instrumentations, Measurement and Applications (ICSIMA 2015)
2015 A pressure sensor based inductive transducer designed for biomedical applications. In: 2015 IEEE 3rd international conference on smart instrumentations, measurement and applications (ICSIMA 2015)
2015 Parametric analysis of single boost converter for energy harvester. In: 2015 IEEE 3rd International Conference on Smart Instrumentations, Measurement and Applications (ICSIMA 2015)
2015 Design of dual band notched ultra wideband antenna using (U-W) shaped slots. In: The International Postgraduate Conference on Engineering Research (IPCER 2015)
2015 Measurement of photoplethysmography signal for heart rate variability and comparison of two different age groups . In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)
2014 Spice model design for carbon nanotube field effect transistor (CNTFET). In: 2014 IEEE International Conference on Semiconductor Electronics (ICSE)
2014 CNTFET SPICE model: design of a carbon nanotube field effect transistor. In: 5th International Conference on Computer & Communication Engineering 2014
2014 Self-tuning deadbeat PD controller for pitch angle control of a bench-top helicopter. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2014 Wireless power transmission system based on magnetic inductive resonance of couple circuit. In: International Conference on Computer and Communication Engineering (ICCCE2014)
2014 Analysis of phase detection circuit for human activity. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2014 Automated person tracking using proximity capacitive sensors. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2014 Design and simulation of 10 MHz MEMS oscillator. In: 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)
2014 Modeling of novel zigbee/IEEE802.15.4 MAC protocol for SCADA low voltage smart grid distribution systems. In: 2014 IEEE Innovative Smart Grid Technologies-Asia (ISGT Asia)
2014 Single-phase inverter for small voltage supplies for use in distributed measurement systems. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2014 Autonomic protocol and architecture for devices in Internet of things. In: 2014 IEEE Innovative Smart Grid Technologies-Asia (ISGT Asia)
2014 Computer-aided diagnosis of pulmonary nodules from chest X-rays using rotation forest. In: International Conference on Computer & Communication Engineering (ICCCE 2014)
2014 Design and implementation of an inductive-based human postures recognition system. In: 2014 International Conference on Biomedical Engineering and Sciences
2014 Traffic aware wireless sensor networks MAC protocol for smart grid applications using spiral backoff mechanism. In: 5th International Conference on Computer and Communication Engineering (ICCCE2014)
2014 Randomness analysis of pseudo random noise generator using 24-bits LFSR. In: 2014 Fifth International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2014)
2014 Optimum performance of carbon nanotube field effect transistor. In: World Congress on Engineering and Computer Science 2014
2014 Multi-level DC-AC inverter for grid-tied renewable energy systems. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014)
2014 Integrating ZigBee modem into android platform. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2014 Evaluation of various leakage current paths with different switching conditions. In: 5th International Conference on Computer and Communication Engineering (ICCCE2014)
2014 Self-organizing spectrum allocation (SON-SA) scheme for heterogeneous network. In: The 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014)
2014 Investigation on grid synchronization for grid-tied DC-AC single phase inverters. In: International Conference on Computer & Communication Engineering 2014
2014 Development of robust quantitative feedback theory controller for quanser bench-top helicopter. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014)
2014 Robust adaptive LQR control of nonlinear system application to 3-Dof flight control system. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014)
2014 Photoplethysmographic based heart rate variability for different physiological conditions. In: 2014 IEEE Student Conference on Research and Development (SCOReD)
2014 A battery charge balancing system with reducing inrush high spike current for electric vehicle. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014)
2014 Fruit classification using Viola-Jones detectors. In: International Conference on Mathematical Applications in Engineering (ICMAE’14)
2014 Computer-aided diagnosis of pulmonary nodules from chest X-rays using rotation forest. In: International Conference on Computer & Communication Engineering (ICCCE 2014)
2014 Power spectrum density based analysis of photoplethymographic signal for different physiological conditions. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014)
2014 Novel IEEE802.15.4 protocol for modern SCADA communication systems. In: 2014 IEEE 8th International Power Engineering and Optimization Conference (PEOCO2014)
2014 Comparison of ITU-R predicted rainfall rates against measured data in Malaysia. In: 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA)
2014 Analysis of power transfer efficiency of inductive coupled telemetry system for wireless power transfer. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2014 Assessment of ITU-R conversion method for 1- minute integration time of precipitation intensity in Malaysia. In: 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA)
2014 Posture characterization based on time and frequency domains parameters for erector spine SEMG signal. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2014 Energy harvesting for back-up power supply using speed humps. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014)
2014 Acquisition of a very low voltage and a low frequency biomedical signal- frequency selective filter design. In: 5th International Conference on Computer & Communication Engineering 2014
2013 Parametric analysis for designing low voltage and low frequency energy harvester booster. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013)
2013 High frequency small signal modeling of CNTFET. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013)
2013 Optimal throughput and self-adaptability of robust real-time IEEE 802.15.4 MAC for AMI Mesh network. In: 5th International Conference on Mechatronics (ICOM'13)
2013 Modeling of optimum chiral carbon nanotube using DFT. In: 13th IEEE International Conference on Nanotechnology
2013 Design and simulation of 20MHz oscillator using CMOS-MEMS beam resonators. In: 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM)
2013 Design and simulation of Clamped-Clamped and Clamped-Free resonators. In: 2013 5th Asia Symposium on Quality Electronic Design (ASQED)
2013 Smart Zigbee/IEEE 802.15.4 MAC for wireless sensor multi-hop mesh networks. In: 2013 IEEE International Power Engineering and Optimization Conference (PEOCO2013)
2013 All-fiber graphene passively q-switched nanosecond thulium doped fiber laser at 1900 nm. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2013
2013 Modeling of small Band-gap CNT for designing of faster switching CNTFET. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium
2013 DC-DC boost converter for grid-tied renewable energy generation systems. In: International Conference on Innovation Challenges in Multidiciplinary Research & Practice (ICMRP 2013)
2013 Simple and efficient multibiometric technique for subject recognition using multilead electrocardiogram signal. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2013 Low voltage DC power supply with spike-blocking features. In: 2013 IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Life (I2MTC 2013)
2013 RF CMOS-MEMS cantilever resonator. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2013 Design of two-stage CMOS amplifier for quartz crystal resonator. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2013 Analysis of CNT electronics structure to design CNTFET. In: 2013 IEEE 5th International Nanoelectronics Conference (INEC)
2013 Boost converter for low voltage energy harvesting applications: basic component selection. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2013 Fast UWB wireless connectivity for MIMO multi-user. In: The 4th International Conference on Information & Communication Technology for the Muslim World (ICT4M)
2012 Tuning fork UWB antenna with unsymmetrical feed line. In: Progress In Electromagnetics Research Symposium
2012 Design of 0.13um CMOS multi-valued analog to digital converter. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Investigation of inductive coupling approach for non-contact bidirectional transfer of power and signal. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Analyzing hysteresis loops via coupling factors for inductive sensing technique. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 An experimental magneto-inductive sensing technique for categorization of magnetic and non-magnetic materials. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Sub-nano seconds UWB pulse shaping with reduced ringing phenomenon. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Pulse generation using avalanche transistor for ultra wide band communication: Analysis and simulation results. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Regulation of stable low voltage power supply through phase angle modulation: simulation details. In: 4th International Conference on Computer and Communication Engineering, Kuala Lumpur
2012 Ripple voltage and its elimination in low voltage power supply. In: 4th International Conference on Computer and Communication Engineering, Kuala Lumpur
2012 Perceptual model-based information hiding in audio signals. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012)
2012 Wireless transfer of power to low power implanted biomedical devices: coil design considerations. In: 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2012)
2012 Fade slope modeling at high elevation angle on space-earth path link. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 A qualitative overview of capacitive sensing techniques for two phase flow measurement. In: International Conference on Computer and Communication Engineering (ICCCE 2012),
2012 A development of self-tuning quantitative feedback theory. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Wideband and flat-gain amplifier using high concentration Erbium doped fibers in series double-pass configuration. In: 2012 International Conference on Computer and Communication Engineering, ICCCE 2012
2012 Modeling of readout circuit for acquisition of sensory signal through non-contact means. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Flat-gain single-stage amplifier using high concentration erbium doped fibers in single-pass and double-pass configurations. In: 2012 The International Symposium on Photonics and Optoelectronics (SOPO 2012)
2011 Capacitance-to-voltage converter for capacitance measuring system. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2011 Symmetrical analysis and evaluation of Differential Resistive Sensor output with GSM/GPRS network. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2011 Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM)
2011 CMOS Op amp testing for capacitive measuring systems application. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011)
2011 Modeling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011)
2011 Design of a 2-bit multi valued analog-to-digital converter . In: 4th International Conference on Mechatronics (ICOM)
2011 Design of triple-band h slot patch antenna. In: 2011 IEEE International RF and Microwave Conference (RFM2011)
2011 A low-cost first-order sigma-delta converter design and analysis. In: Instrumentation and Measurement Technology Conference (I2MTC), 2011 IEEE
2011 Analysis of rectifier circuits for low power and sensing applications. In: The 4th International Conference on Mechatronics (ICOM'11)
2011 U-shaped planer UWB antenna with unsymmetrical feed. In: International Symposium on Antennas and Propagation (ISAP 2011)
2011 Novel MEMS fully differential capacitive transducer design and analysis. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2011 Characterization of materials using non-contact inductive sensor applications. In: The 4th International Conference on Mechatronics (ICOM'11)
2011 Design and simulation of an on-chip oversampling converter with a CMOS-MEMS differential capacitive sensor. In: 2011 IEEE Symposium Design, Test and Packaging of MEMS and MOEMS
2011 Analysis of rectifier circuits for low power and sensing application. In: 4th International Conference on Mechatronics (ICOM'11)
2011 Modelling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics, RSM 2011
2011 Preliminary analysis of Ku-Band rain fade data for earth-to-satellite path measured in Malaysia. In: 17th Asia-Pacific Conference on Communications (APCC 2011)
2011 2.45 GHz passive RFID tag antenna mounting on various platforms. In: 2011 IEEE International RF and Microwave Conference (RFM2011)
2010 Differential resistive transducer for power harvesting for implanted devices. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Design of a low noise amplifier with GaAs MESFET at Ku-Band. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 Thermal noise generator and injector circuit for data encryption . In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Analysis of inductive powering harvesting circuit. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE)
2010 Effect of frequency on fade slope based on rain attenuation data measured in Malaysia. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 A hyperbola-pair based lane detection system for vehicle guidance. In: World Congress on Engineering and Computer Science 2010 (WCECS2010)
2010 Simmulation of a virtual transducer using potentiometer. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Design and analysis of a first-order sigma-delta analog-to-digital converter for MEMS resistive sensor. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE)
2010 Linearization circuit for transducers for nonlinear reponses. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Practical energy efficiency techniques to the industry. In: Asia Pacific Regional Conference & Exhibition on Energy Efficiency 2010
2010 Design of capacitive measuring systems for high frequency band sensor transducer. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 Identification of Linearized Regions of Non-Linear Transducers Responses. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2009 Rain fade and it's effect analysis for earth-to-satellite microwave link based on measured rainfall statistics in Bangladesh. In: IEEE 9th Malaysia International Conference on Communications (MICC 2009)
2009 Multivariable transducer interfacing circuit for wireless monitoring of smart implants . In: XIX IMEKO World Congress, Fundamental and Applied Metrology
2008 Review and evaluation of the proposed wireless mesh routing protocols . In: International Conference on Computer and Communication Engineering 2008 (ICCCE08)
2008 Real time lane detection for autonomous vehicles. In: International Conference on Computer and Communication Engineering 2008 May 13-15, 2008 Kuala Lumpur, Malaysia
2008 A non-contact capacitance type level transducer for liquid characterization. In: International Conference on Computer and Communication Engineering 2008
2006 Communication system for controlling smart appliances using power line communication. In: 2nd International Conference on Information and Communication Technologies, 2006, (ICTTA '06)
2006 Wireless technology: current status and future directions. In: 2nd International Conference on Information and Communication Technologies, 2006, (ICTTA '06)
2006 Data transfer over a low voltage power line for data acquisition and monitoring of electrical appliances. In: Universities Power Engineering Conference, 2006. UPEC '06. Proceedings of the 41st International
2004 Communications cryptography. In: 2004 RF and Microwave Conference
2004 Speech coding for Bluetooth with CVSD algorithm. In: 2004 RF and Microwave Conference
2004 Wireless and wired remote measrement unit design and applications. In: 39th International Universities Power Engineering Conference, UPEC 2004
2004 Cyclic redundancy encoder for error detection in communication channels. In: 2004 RF and Microwave Conference

Book

2019 Solar energy: fundamentals, inverters and systems. IIUM Press, International Islamic University Malaysia . ISBN 978-967-418-482-7

Book Section

2017 Wireless structural health monitoring system by capacitor sensing technique. In: IAENG Transactions on Engineering Sciences, Special Issues for the International Association of Engineering Conferences 2016 World Scientific . ISBN 9789813226197 , pp.168-178
2014 Development of a software package for the design of a microwave link. In: Advancements in computer and communications engineering IIUM Press . ISBN 978-967-418-283-0 , pp.75-87
2011 Mathematical model for contactless measurement. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.102-106
2011 UWB pulse generation,shaping and analysis . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.133-137
2011 A mathematical study of a thermistor astable multivibrator in a linearization technique. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.113-116
2011 Power supply power-supply interference in smart sensors-to-microntroller interface for biomedical signals . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.139-164
2011 A study of linearization technique using a nonlinear thermistor. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.117-122
2011 Response and inaccuracy issues of sensors . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.165-174
2011 Review of image processing in industrial inspection and quality control . In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.245-249
2011 Cognitive radio vs intelligent antenna. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.123-133
2011 Performance improvement of sensors response using piece-wise non-linear (PWL) A/D and pulse-width modulation (PWM) A/D techniques . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.175-184
2011 Power supply interference in smart sensor microcontroller interface . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.185-199
2011 UWB pulse generation and modulation circuits for biomedical implants. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.134-140
2011 2.45 Ghz passive RFID tag antenna mounting on various platforms . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.201-215
2011 Rain fade slope prediction model based on satellite data measured in Malaysia. In: Antennas and Propagation: Modelling, Simulation and Measurements IIUM Press . ISBN 9789674181383 , pp.303-309
2011 Analysis of hybrid stepper motor performance under the influence of voltage supply interference . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.217-227
2011 UWB communications for biomedical implants . In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.141-144
2011 Piece-wise linear analog to digital (PLADC) converter process . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.239-247
2011 UWB pulse generation for biomedical implants. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.145-148
2011 Design and implementation of an optimal fuzzy logic controller using egentic algorithm . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.249-264
2011 Design and hardware implementation of conditioning circuit for accurate reading from transducers with nonlinear responses . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.265-275
2011 Ultra-wide band technology. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.149-152
2011 MVL ADC design and simulation. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.153-158
2011 Transducers-to-microcntroller interfaces-software solution approach . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.277-290
2011 MVL design and current mode circuit elements. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.159-163
2011 Noise modulated cryptographic generation for use in UWB wireless communication. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.164-172
2011 Theoretical background of human posture recognition. In: Human Behaviour Recognition, Identification and Computer Interaction IIUM Press . ISBN 978-967-418-156-7 , pp.15-21
2011 UWB pulse generation and shaping: analysis and simulation results. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.173-176
2011 Development of automation system for small/medium scale biomass based renewable power plants. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications IIUM Press . ISBN 9789674181703 , pp.108-116
2011 Simulations of resistance variations to pulse generator circuits. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.177-183
2011 Modelling of low voltage power line for data communication: simulation results . In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications IIUM Press . ISBN 9789674181703 , pp.118-124
2011 RLC circuit response. In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.13-18
2011 On the electrode arrangements of capacitive sensor for two phase Gas flow measurement . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.53-57
2011 Cognitive radio vs intelligent antenna . In: Principle of Transducer devices and components IIUM Press . ISBN 978-967-418-172-7 , pp.327-339
2011 Controlling electrical appliances using global mobile system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.439-443
2011 Low voltage powerline analysis and simulation results. In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications IIUM Press . ISBN 9789674181703 , pp.125-132
2011 Basic concept of inductance for inductive transducers . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.59-63
2011 Application and case studies of magnetic induction . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.343-344
2011 Magnetic properties for magnetic transducer . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.65-70
2011 ZigBee applications to wireless communication systems . In: Electrical Automation Systems Towards Intelligent and Energy Efficiency Applications IIUM Press . ISBN 9789674181703 , pp.133-137
2011 Magnetic hysteresis theory :application perspective . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.71-74
2011 The principle of resistive sensing . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.75-81
2011 Spikes blocking and surge protection . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.83-88
2011 Inductive sensor. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.1-7
2011 Voltage supply and voltage regulation . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.89-97
2011 Full-wave rectification of a low-voltage source . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.99-106
2011 Design of differential resistive measuring system and its applications . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.107-113
2011 Wireless transfer of low-power to implanted biomedical devices: introduction and 2-D coil parameters. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.8-13
2011 Linearizing techniques for sensor output . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.115-118
2011 Human path detection : a review. In: Human Behaviour Recognition, Identification and Computer Interaction IIUM Press . ISBN 978-967-418-156-7 , pp.113-128
2011 Wireless transfer of power to low-power implanted biomedical devices: 3-dimensional coil design considerations. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.14-21
2011 Wireless transfer of low-power to implanted biomedical devices: inductive link design. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.22-27
2011 Design of capacitive measuring system for high frequency band sensor transducer. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.83-88
2011 Traffic light sequencing - an element of adaptability. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05, and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.32-37
2011 Wireless transfer of low-power to implanted biomedical devices: rectifier design. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.28-35
2011 Speaker recognition using mel frequency cepstrum. In: Human Behaviour Recognition, Identification and Computer Interaction IIUM Press . ISBN 978-967-418-156-7 , pp.263-288
2011 Data conversion basic concepts. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.36-40
2011 Nyquist-rate analog-to-digital converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.41-46
2011 Oversampling analog-to-digital converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.47-52
2011 Switched-capacitor integrator design. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.53-59
2011 CMOS operational amplifier design. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.60-67
2011 Inductive power system for energy harvesting. In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.45-51
2011 Digital-to-analog converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.68-72
2011 RC circuit response. In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.1-6
2011 Converters results verifications. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.73-76
2011 Capacitive sensing for non-contact means of measurement . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.19-26
2011 Sensors in electronic applications . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.27-32
2011 Sensor and sensor response-issues and interfacing . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.119-131
2011 Principle of capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.89-94
2011 Contact type and noncontact type gas flow measuring sensors . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.33-38
2011 CMOS operational amplifier for capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.95-101
2011 Output control devices : actuators . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.39-43