Faculties

Faculties

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


A. H. M. Zahirul Alam
Professor

Print CV Email Me

Staff Detail


AHM Zahirul Alam received the B.Sc. and M.Sc. degrees in Electrical and Electronic Engineering from Bangladesh University of Engineering and Technology (BUET) in 1984 and 1987, respectively. He obtained his Doctor of Engineering degree from Kanazawa University, Japan in 1996. Professor Alam started his career as an Assistant Lecturer immediately after his graduation in September 1984 in BUET and full time faculty member in April 1985 in BUET. He was attached to BUET till March 2005. During his tenure in BUET, he was promoted to Assistant Professor in October 1987 and then, Associate Professo ... show more

  • Ph.D in Natural Science & Technology - Doctor of Philosophy, Kanazawa University
  • Master in Electrical and Electronic Engineering - Masters Degree, Bangladesh University of Engineering & Technology, Dhaka
  • Bachelor in Electrical and Electronic Engineering - Bachelor Degree, Bangladesh University of Engineering & Technology, Dhaka
  • 2006 - 2025 Life Fellow, Institution of Engineers, Bangladesh (IEB, Bangladesh)
  • 2005 - 2025 Fellow, Bangladesh Computer Society (BCS)
  • 2016 - 2025 Member, International Association of Engineers (IAENG)
  • 2017 - 2019 ,
  • 2019 - 2019 Executive Member, IEEE EDS Malaysia Chapter
ANALOG CIRCUIT DESIGN 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016
COMPUTER AND INFORMATION ENGINEERING LAB III 2008/2009 2009/2010 2010/2011
DIGITAL COMMUNICATIONS 2003/2004
ELECTRIC CIRCUITS 2003/2004 2004/2005 2005/2006 2006/2007 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012 2013/2014 2016/2017 2017/2018
ELECTRICAL AND COMPUTER ENGINEERING LAB I 2013/2014 2017/2018
ELECTRONIC CIRCUITS 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020
ENGINEERING LAB I 2005/2006 2006/2007 2007/2008 2009/2010 2012/2013
INTEGRATED CIRCUIT TECHNOLOGY 2008/2009 2016/2017 2017/2018 2018/2019 2019/2020
MICROELECTRONIC CIRCUITS 2004/2005 2005/2006 2006/2007
PROJECT I 2018/2019
SEMICONDUCTOR DEVICES 2007/2008 2011/2012 2017/2018 2018/2019
VLSI DESIGN 2003/2004 2004/2005 2005/2006 2006/2007 2007/2008 2008/2009 2009/2010 2010/2011
In Progress
2019 - Present Empirical Model for Volatile Organic Compound Selectivity Prediction of Polymer-based Acoustic Wave Sensor Array through Machine Learning Algorithm
2019 - Present Critical Prediction Modeling for Integrated Circuits (IC) Electromagnetic Compatibility (EMC) in Smart Automotive Industry
2018 - Present Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications
2018 - Present Verifying the Mechanical Power Transformation Effectiveness of Brushless DC Motor and its Characteristics
2018 - Present Development of Continuous-time Non-invasive Glucose Sensing System
2017 - Present Electrical Characterization of Capacitive Sensing Design for Wireless Sensor.
2017 - Present Theoretical modeling of lung cancer biomarkers in exhaled breath using silicon compatible electroacoustic microsensors
2016 - Present Modelling and Optimisation of Stepped Waveform Generation for Multilevel Inverters Topology Applications
2015 - Present Proposing with Analysis a Multi-Level Inverter Using Optimized Pulse-Width-Modulation Approach with Reduced Harmonics and Switching Losses
2013 - Present ESTABLISHMENT OF THE IIUM CENTRE OF EXCELLENCE FOR ELECTRIC MOBILITY(ICEM)
2013 - Present IIUM Centre of Excellence for Electric Mobility (ICEM)
Completed
2017 - 2019 Electrical Characterization of Capacitive Sensing Design for Wireless Sensor.
2016 - 2019 Modelling and Optimisation of Stepped Waveform Generation for Multilevel Inverters Topology Applications
2015 - 2018 Characterization for Verification of Electrostatic Generator's Effectiveness for Power Generation
2015 - 2019 Proposing with Analysis a Multi-Level Inverter Using Optimized Pulse-Width-Modulation Approach with Reduced Harmonics and Switching Losses
2013 - 2015 Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates
2013 - 2017 Development of Green Transportation System
2013 - 2017 Exploration on CMOS Capacitance Based Structural Health Monitoring by Energy Harvested Wireless Sensor Networks
2013 - 2015 Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2012 - 2019 Investigation of Current Leakage Mechanisms on Inas Nanoisland Diodes for Radiation Hardness
2012 - 2015 Design and development of MEMS Acoustic Energy Harvester
2012 - 2014 Development of Electrical Vehicle by Converting Proton SAGA Conventional Car
2012 - 2013 Design of IR-UWB Pulse Generator for 802.11a & WIMAX Interference Avoidance
2012 - 2015 A Development of a Top Down Silicon Nanoware into Field Effect Transistor
2011 - 2011 Design And Development Of RFID Tag Antenna For The Use Of Metallic Item
2011 - 2012 Study of the Electrical Properties of Radiation Hard Devices Based on III-V Materials
2011 - 2015 Novel Vertically Integrated Nano GHz Surface Acoustic Wave Oscillator for RF Applications
2010 - 2014 Electromagnetic Actuated CVT System for Medium Size Passenger Car
2010 - 2013 Characterization of Radio Channel for Body Area Networks
2010 - 2011 Modeling and Characterization of Magnetic materials at low Frequencies for Nano-sensor fabrication
2009 - 2012 Modeling of a Novel Integrated Surface Acoustic Wave Resonator
2009 - -1 Sigma-to-beta Converter Analysis, Simulation and Experimental Details.
2009 - 2013 MULTI-GB/S HIGH SPEED SERIAL TRANSCEIVER (HSST) SUITABLE AS PHYSICAL LAYER FOR PCIE 2.0, SATA 3.0 ANS USB 3.0 SUPPER SPEED APPLICATIONS
2009 - 2011 Design of Capacitance Voltage Converter for Development of High Frequency Band Sensor Transducer for Capacitive Measuring Systems
2009 - 2011 Design and Stimulation of Adaptive Beamforming Algorithm and Linear Array Antenna for Smart Antenna System
2009 - 2011 Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2008 - 2010 Wireless Data Acquisition for Monitoring of Civil Structures with Embedded Sensors - Experimental Results
2008 - 2010 Characterization of Indoor Powerlines As Data Channels- Experimental Details and Results
2007 - 2009 Characterization of Direct Sensor-to-Microcontroller Interfacing
2006 - 2008 Design and Fabrication of High Performance RF-MEMS Switches
2006 - 2010 Measurement of Specific Absorption Rate from Wireless LAN Radiation in International Islamic University Campus
23 November 2016 Chartered Engineer. The Institution of Engineering and Technology, UK - International level.
02 September 2016 Outstanding Contributor, Journal Articles Indexed in Scopus & WOS. CREAM 2016 - University level.
28 October 2015 KERIE. KOE, IIUM - KCDIO level.
28 October 2015 KERIE. KOE, IIUM - University level.
29 September 2015 Certificate of Merit. International Association of Engineers - International level.
12 June 2014 IRIIE. IIUM - University level.
07 October 2012 Proton Green Mobility Challange 2012. Proton & MOSTI - National level.
23 May 2008 Kulliyyah Best Lecturer. IIUM - University level.
Article
2020 Design an ultra-wideband modified wilkinson power divider fed-by balanced antipodal vivaldi antenna array for imaging applications. Journal of Advanced Manufacturing Technology , 14 (1)
2019 Design and parametric evaluation of UWB antenna for array arrangement. Bulletin of Electrial Engineering and Informatics , 8 (2) pp.644-652
2019 Design and implementation of a series switching SPSI for PV cell to use in carrier based grid synchronous system. Bulletin of Electrical Engineering and Informatics , 8 (2) pp.349-366
2019 Designing large-scale antenna array using sub-array. Bulletin of Electrical Engineering and Informatics , 8 (3) pp.906-915
2019 Frequency dependency analysis for differential capacitive sensor. Bulletin of Electrial Engineering and Informatics , 8 (3) pp.789-797
2019 Parasitic consideration for differential capacitive sensor. Bulletin of Electrial Engineering and Informatics , 8 (3) pp.798-807
2019 PLL-based 3φ inverter circuit for microgrid system operated by electrostatic generator. IIUM Engineering Journal , 20 (1) pp.177-193
2018 A single LC tank based active voltage balancing circuit for battery management system. IIUM Engineering Journal , 19 (1) pp.158-167
2018 Effects of inter-element spacing and number of elements on planar array antenna characteristics. Indonesian Journal of Electrical Engineering and Computer Science , 10 (1) pp.230-240
2018 Design and optimization of ultra-wideband antipodal vivaldi antenna for radar and microwave imaging application. Sindh University Research Journal (Science Series) , 50 (3D) pp.6-9
2018 High gain UWB horn antenna for concealed metal detection and microwave imaging application. Sindh University Research Journal (Science Series) , 50 (3D) pp.161-164
2018 Recognition of metal objects inside wall using antipodal vivaldi antenna. Indonesian Journal of Electrical Engineering and Computer Science , 11 (1) pp.27-35
2018 An analysis of a flexible dry surface electrodes. Indonesian Journal of Electrical Engineering and Computer Science , 10 (1) pp.74-83
2017 A study on controllable aluminium doped zinc oxide patterning by chemical etching for MEMS application. Microsystems Technologies , 23 (9) pp.3851-3862
2017 Reduction of cavity length dependence and improvement of characteristics of 1.55 µm quantum dot based LASER using Indium Nitride. Journal of Optoelectronics and Advanced Materials , 19 (5-6 (May-June)) pp.298- 302
2017 Improvement of temperature dependence of carrier characteristics of quantum dot solar cell using InN quantum dot. International Journal of Renewable Energy Research , 7 (1) pp.330-335
2017 A comparative analysis of the effect of temperature on band-gap energy of gallium nitride and its stability beyond room temperature using a Bose–Einstein model and Varshni'S model. IIUM Engineering Journal , 18 (2) pp.151-157
2016 Low value capacitance measurement system for the application of monitoring human body. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.327-330
2016 Development of high frequency 14 nm CNTFET model. Materials Today: Proceedings , 3 (2) pp.258-264
2016 Analysis on the effect of stimulator parameters in electrical stimulation procedure on the human bicep muscle. Jurnal Teknologi , 78 (7-5) pp.15-22
2016 Efficient capacitance sensing for wireless health monitoring system.. IIUM Engineering Journal , 17 (2) pp.21-29
2016 Non-intrusive monitoring of everyday behavioral activities in an indoor environment. Journal of Electronic Science and Technology , 14 (3) pp.205-210
2016 Daily activity monitoring of an elderly Person for determining their wellness. International Journal of Smart Home , Vol. 10 (8) pp.339-346
2015 Obtaining hysteresis loops at low frequency for characterization of materials to be used in biomedical applications. IIUM Engineering Journal , 16 (1) pp.19-32
2015 Piezoelectric thin films for double electrode CMOS MEMS surface acoustic wave (SAW) resonator. Microsystems Technologies , 21 pp.1931-1940
2015 Multi‑frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies , 21 (9) pp.1915-1922
2015 Multi-frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies , 21 (9) pp.1915-1922
2015 A DC-DC circuit using boost converter for low voltage energy harvesting application. American Journal of Applied Sciences , 12 (4) pp.272-275
2015 Medium voltage range energy harvester application using boost converter. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9744-9747
2015 On the issue of fly-back spikes in PWM operated single-phase transformer-less grid-tied inverter. MAGNT Research Report , 3 (5) pp.1-5
2014 Mems-based oscillators: a review. IIUM Engineering Journal , 15 (1) pp.1-15
2014 Development of electric vehicle: public perception and attitude, the Malaysian approach. World Review of Business Research , 5 (2) pp.149-167
2014 Development of electric vehicle: public perceptionand attitude, the Malaysian approach. World Review on International Transportation Research , 5 (2) pp.149-167
2014 LM555 timer-based inverter low power pure sinusoidal AC output. World Applied Sciences Journal , 30 pp.141-143
2014 Current Loss Comparison of PWM Operated Transformer-Based and Transformer-Less Inverter. International Journal of Advanced Research in Electronics and Communication Engineering (IJARECE) , 3 (3) pp.343-346
2014 Design and simulation of RF-CMOS SPST switch for reconfigurable RF front-end. International Journal of Advancement in Electronics and Electrical Engineering , 4 (1) pp.13-23
2014 Carbon nanotubes: a review on future generation nano device. Middle-East Journal of Scientific Research , 20 (1) pp.74-81
2014 Analysis and evaluation of differential inductive transducers for transforming physical parameters into usable output frequency signal. International Journal of Physical Sciences , 9 (15) pp.339-349
2014 Analysis of carbon nanotube device physics . American Journal of Nano Research and Application , 2 (6) pp.112-115
2014 DC-DC boost converter for grid-tied renewable energy generation systems. World Applied Sciences Journal , 30 pp.144-147
2014 Small band-gap-based CNT for modeling of nano sensor. Procedia Computer Science , 42 pp.122-129
2014 A study on health monitoring system: recent advancements. IIUM Engineering Journal , 15 (2) pp.87-99
2013 Environmental friendly device: modeling of carbon nanotube with optimum chirality. Australian Journal of Basic and Applied Sciences , 7 (8) pp.648-652
2013 Design and Development of a Simulator for Modelling Carbon Nanotube. IOP Conference Series: Materials Science and Engineering , 53(1) (012049) pp.1-6
2013 Investigation on carbon nanotube electronics structure . Pensee Journal , 75 (11) pp.123-129
2013 Modeling of a carbon nanotube sensing device. Middle-East Journal of Scientific Research , 17 (10) pp.1475-1478
2013 A qualitative review for wireless health monitoring system . IOP Conference Series: Materials Science and Engineering , 53 (1) pp.1-7
2013 Transforming human gait for signature signals characterization. Materials Science and Engineering , 53 pp.1-7
2012 Development of a 2-digit multi valued analog-to-digital converter. World Applied Sciences Journal , 17 (5) pp.622-625
2012 Design of a multiple valued logic analog to digital converter using 0.13μm CMOS process. Science Series Data Report , 4 (3) pp.(1-8)
2012 Fuzzy knowledge-based model for prediction of traction force of an electric golf car. Journal of Terramechanics , 49 (1) pp.13-25
2012 Design of microstrip patch antenna using slotted partial ground and addition of stairs and stubs for UWB application . Cyber Journals : Multidisciplinary Journals in Science and Technology, Journal of Selected Areas in Telecommunications (JSAT)
2012 Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology , 26 (7) pp.1-9
2011 Development of economical maximum power point tracking system for solar cell. Australian Journal of Basic and Applied Sciences , 5 (5) pp.700-713
2011 Design and implementation of potentiometer-based nonlinear transducer emulator. IIUM Engineering Journal , 12 (1) pp.77-87
2011 An investigation of soft magnetic and non magnetic materials under low frequency. IIUM Engineering Journal , 12 (6) pp.59-70
2011 Design of a multi valued current mode comparator. Australian Journal of Basic and Applied Sciences , 5 (10) pp.662-666
2010 Design of capacitance to voltage converter for capacitive sensor transducer. American Journal of Applied Sciences , 7 (10) pp.1353-1357
2010 Fade margin analysis due to duststorm based on visibility data measured in a desert. American Journal of Applied Sciences , 7 (4) pp.551-555
2010 Tunning fork type ultra wide band (UBW) antenna . pp.41
2010 Prediction of signal attenuation due to duststorms using mie scattering. IIUM Engineering Journal , 11 (1) pp.71-87
2009 Design of multi-valued quaternary based analog-to-digital converter. American Journal of Applied Sciences , 6 (8) pp.1522-1527
2009 Tunable bandpass filter using RF MEMS switches. IIUM Engineering Journal , 10 (2) pp.69-80
2009 Design of a high-speed, reconfigurable digital rank order filter. IIUM Engineering Journal , 10 (1) pp.19-30
2009 Effects of MEMS material on designing a multi-band reconfigurable antenna. Iranian Journal of Electrical and Computer Engineering , 8 (2) pp.112-118
2009 Characterization of indoor power lines as data communication channels experimental details and results. International Journal of Electrical and Computer Engineering , 4 (10) pp.647-651
2009 Microelectrical mechanical systems switch for designing multi-band antenna. Journal of Computer Science , 5 (7) pp.479-486
2008 Rule-based fuzzy logic controller with adaptable reference. International Journal of Electrical and Computer Engineering , 3 (1) pp.7-11
2008 Design of a planar structure of multifrequency patch antenna. IJCSES International Journal of Computer Sciences and Engineering Systems, , 2 (3) pp.207-211
2008 Capacitive transducer circuits for liquid level measurement. International Journal of Computer Sciences and Engineering Systems , 2 (3) pp.195-197
2008 Analysis and implementation of nonlinear transducer response over a wider response range. Sensors & Transducers Journal , 89 (3) pp.61-70
2008 Design and implementation of an optimal fuzzy logic controller using genetic algorithm. Journal of Computer Science , 4 (10) pp.799-806
2007 A high accuracy measurement circuit for soil moisture detection. World Academy of Science, Engineering and Technology , 1 (11) pp.947-950

Conference or Workshop Item

2019 Adaptive neuro-fuzzy controller for grid voltage dip compensations of grid connected DFIG-WECS. In: 2019 IEEE International Electric Machines & Drives Conference (IEMDC)
2019 An Arduino microcontroller based RLC meter. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM)
2019 UWB antenna based time-domain approach for through the walls gap estimation. In: 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2019)
2019 Design and comparative validation of antipodal vivaldi antenna using periodic elliptical-slots with extended triangular-shaped as dielectric lens for microwave imaging applications. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019)
2019 High-gain rectangular-fins shaped balanced antipodal vivaldi antenna array extended by dielectric for wide-band imaging application. In: 2019 IEEE International Conference on Innovative Research and Development (ICIRD)
2018 Comparative analysis of UWB balance Antipodal Vivaldi Antenna for array configuration. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018)
2018 Carrier based synchronous control and performance analysis of an S-PSI using PV for microgrid applications. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018
2018 Design and analysis of 1-to-4 Wilkinson power divider for antenna array feeding network. In: 2018 IEEE International Conference on Innovative Research and Development (ICIRD)
2018 Improvement of active power factor correction circuit for switch mode power supply using fly back and boost topology. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE)
2018 Scalability analysis for designing large-scale antenna array using sub-array. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE)
2018 Single Supply Differential Capacitive Sensor with Parasitic Capacitance and Resistance Consideration. In: 7th International Conference on Computer and Communication Engineering 2018 (ICCCE 2018)
2018 Effects of inter element spacing on large antenna array characteristics. In: 2017 IEEE International Conference on Smart Instrumentation, Measurement and Applications
2018 Analysis of the frequency dependency to the single supply differential capacitive sensor. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018
2018 Capacitive proximity floor sensing system for elderly tracking and fall detection. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017
2018 Detection and analysis of metal impairment inside wall using UWB modified antipodal vivaldi antenna. In: 2017 4th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS)
2018 Improved radiation characteristic of balanced antipodal vivaldi antenna in array configuration. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018
2017 High gain UWB horn antenna for concealed metal detection and microwave imaging application. In: 3rd International Conference on Engineering, Technologies and Applied Sciences 2017 (ICETAS-2017)
2017 Development of ECG home monitoring system. In: 2017 IEEE Regional Symposium on Micro and Nanoelectronics ( RSM)
2017 Current behavior analysis of the single supply differential capacitive sensing. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2017 Optimum concentric circular array antenna with high gain and side lobe reduction at 5.8 GHz. In: 6th International Conference on Mechatronics - ICOM'17
2017 Analysis of the internal temperature of the cells in a battery pack during SOC balancing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
2017 Three phase DC-DC converter with six inverter for EV application. In: 3rd International Exchange and Innovation Conference on Engineering & Sciences
2017 Single supply differential capacitive sensor with energy harvester compatibility. In: 2016 IEEE Industrial Electronics and Applications Conference (IEACon)
2017 Ultra-wideband antipodal vivaldi antenna for radar and microwave imaging application. In: IEEE 3rd International Conference on Engineering, Technologies and Social Sciences 2017 (ICETSS-2017)
2017 Negative bias temperature instability characterization and lifetime evaluations of submicron pMOSFET. In: 2017 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2017)
2017 A capacitive proximity sensing scheme for human motion detection. In: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)
2016 Massive MIMO for Fifth Generation (5G): Opportunities and challenges. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016)
2016 An activity monitoring system for senior citizens living independently using capacitive sensing technique. In: Conference Record - IEEE Instrumentation and Measurement Technology Conference
2016 Capacitance-to-voltage converter design to measure small change in capacitance produced by human body movement. In: IEEE International WIE Conference on Electrical and Computer Engineering, WIECON-ECE 2015
2016 Triangular shaped silicon nanowire FET characterization using COMSOL multiphysics. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016)
2016 Application of UWB wireless MIMO connectivity inside modern aircraft. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Health and wellness monitoring of elderly people using intelligent sensing technique. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016)
2016 Capacitance sensing and energy harvesting for wireless health monitoring system. In: 2016 International Conference on Intelligent Systems Engineering (ICISE)
2016 Wireless capacitor sensing for structural health monitor. In: World Congress on Engineering 2016
2015 High frequency CNTFET-based logic gate. In: 10th IEEE 2015 Regional Symposium on Micro and Nanoelectronics (RSM 2015)
2015 Passive monitoring techniques for elderly: a review on recent development and prospective. In: World Congress on Engineering and Computer Science 2015
2015 Parametric sweep analysis of medium voltage range boost converter for energy harvester application. In: 2015 IEEE International WIE Conference on Electrical and Computer Engineering (WIECON-ECE)
2015 A low cost capacitive sensing system for identifying and detecting falls of senior citizens. In: 2015 IEEE 3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2015 DIBL and subthreshold swing effect on carbon nanotube field effect transistor. In: World Congress on Engineering (WCE 2015)
2015 NEGF-based transport phenomena for semiconduncting CNTFET. In: 2015 5th National Symposium on Information Technology: Towards New Smart World (NSITNSW)
2015 A low cost capacitive sensing system for monitoring and detecting falls of senior citizens. In: 2015 IEEE 3rd International Conference on Smart Instrumentations, Measurement and Applications (ICSIMA 2015)
2015 A pressure sensor based inductive transducer designed for biomedical applications. In: 2015 IEEE 3rd international conference on smart instrumentations, measurement and applications (ICSIMA 2015)
2015 Parametric analysis of single boost converter for energy harvester. In: 2015 IEEE 3rd International Conference on Smart Instrumentations, Measurement and Applications (ICSIMA 2015)
2014 Spice model design for carbon nanotube field effect transistor (CNTFET). In: 2014 IEEE International Conference on Semiconductor Electronics (ICSE)
2014 Modeling and simulation of CNTFET small signal model. In: 2014 IEEE 6th International Nanoelectronics Conference(INEC)
2014 CNTFET SPICE model: design of a carbon nanotube field effect transistor. In: 5th International Conference on Computer & Communication Engineering 2014
2014 Analysis of phase detection circuit for human activity. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2014 Automated person tracking using proximity capacitive sensors. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2014 Single-phase inverter for small voltage supplies for use in distributed measurement systems. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2014 Optimum performance of carbon nanotube field effect transistor. In: World Congress on Engineering and Computer Science 2014
2014 Multi-level DC-AC inverter for grid-tied renewable energy systems. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014)
2014 Investigation on grid synchronization for grid-tied DC-AC single phase inverters. In: International Conference on Computer & Communication Engineering 2014
2014 Application of UWB wireless MIMO connectivity inside ships. In: 5th International Conference on Computer & Communication Engineering 2014
2014 Comparison of ITU-R predicted rainfall rates against measured data in Malaysia. In: 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA)
2014 Assessment of ITU-R conversion method for 1- minute integration time of precipitation intensity in Malaysia. In: 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA)
2013 Parametric analysis for designing low voltage and low frequency energy harvester booster. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013)
2013 0.35μm SPDT RF CMOS switch for wireless communication application. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013)
2013 High frequency small signal modeling of CNTFET. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013)
2013 Development of a position detection technique for UWB chipless RFID tagged object. In: 2013 International Conference on Computing, Electrical and Electronics Engineering (ICCEEE 2013)
2013 Modeling of optimum chiral carbon nanotube using DFT. In: 13th IEEE International Conference on Nanotechnology
2013 Development of green transportation system. In: IIUM Enginnering Congress 2013(2-4July 2013)
2013 Real-time bridge scour monitoring system by using capacitor sensor. In: 3rd International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2013)
2013 Modeling of small Band-gap CNT for designing of faster switching CNTFET. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium
2013 DC-DC boost converter for grid-tied renewable energy generation systems. In: International Conference on Innovation Challenges in Multidiciplinary Research & Practice (ICMRP 2013)
2013 Simple and efficient multibiometric technique for subject recognition using multilead electrocardiogram signal. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2013 Analysis of CNT electronics structure to design CNTFET. In: 2013 IEEE 5th International Nanoelectronics Conference (INEC)
2013 Boost converter for low voltage energy harvesting applications: basic component selection. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA)
2013 Fast UWB wireless connectivity for MIMO multi-user. In: The 4th International Conference on Information & Communication Technology for the Muslim World (ICT4M)
2012 Tuning fork UWB antenna with unsymmetrical feed line. In: Progress In Electromagnetics Research Symposium
2012 Design of 0.13um CMOS multi-valued analog to digital converter. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Investigation of inductive coupling approach for non-contact bidirectional transfer of power and signal. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 An experimental magneto-inductive sensing technique for categorization of magnetic and non-magnetic materials. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Sub-nano seconds UWB pulse shaping with reduced ringing phenomenon. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Pulse generation using avalanche transistor for ultra wide band communication: Analysis and simulation results. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2012 Design of a pierce oscillator for CMOS SAW resonator. In: International Conference on Computer and Communication Engineering (ICCCE 2012)
2011 Design of fuzzy based controller for modern elevator group with floor priority constraints. In: 4th International Conference on Mechatronics (ICOM'11)
2011 Capacitance-to-voltage converter for capacitance measuring system. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2011 Symmetrical analysis and evaluation of Differential Resistive Sensor output with GSM/GPRS network. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2011 Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM)
2011 CMOS Op amp testing for capacitive measuring systems application. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011)
2011 Modeling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011)
2011 Proposing a horizontal path adjustment factor for microwave link's attenuation prediction based on the analysis of dust storm behavior . In: 10th Malaysia International Conference on Communications (MICC)11)
2011 Design of a 2-bit multi valued analog-to-digital converter . In: 4th International Conference on Mechatronics (ICOM)
2011 A novel bandwidth enhancement technique for a compact right/left-handed (CRLH)transmission line (TL) based antenna. In: Progress in Electromagnetics Research Symposium Abstracts
2011 A low-cost first-order sigma-delta converter design and analysis. In: Instrumentation and Measurement Technology Conference (I2MTC), 2011 IEEE
2011 Analysis of rectifier circuits for low power and sensing applications. In: The 4th International Conference on Mechatronics (ICOM'11)
2011 U-shaped planer UWB antenna with unsymmetrical feed. In: International Symposium on Antennas and Propagation (ISAP 2011)
2011 Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management
2011 Characterization of materials using non-contact inductive sensor applications. In: The 4th International Conference on Mechatronics (ICOM'11)
2011 Analysis of rectifier circuits for low power and sensing application. In: 4th International Conference on Mechatronics (ICOM'11)
2011 Modelling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics, RSM 2011
2011 2.45 GHz passive RFID tag antenna mounting on various platforms. In: 2011 IEEE International RF and Microwave Conference (RFM2011)
2010 Knowledge-based disk scheduling policy using fuzzy logic. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 DATICS-2010: Welcome message from workshop organizers: FutureTech 2010. In: 2010 5th International Conference on Future Information Technology, FutureTech 2010 - Proceedings
2010 Differential resistive transducer for power harvesting for implanted devices. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Integrated Medical Emergency Model: an interactive web-based database. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 Design of a low noise amplifier with GaAs MESFET at Ku-Band. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 Thermal noise generator and injector circuit for data encryption . In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Analysis of inductive powering harvesting circuit. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE)
2010 Tuning fork type Ultra Wide Band (UWB) antenna. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Smart antenna design based on direction of arrival (DOA) and beamforming optimization. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Design and analysis of a first-order sigma-delta analog-to-digital converter for MEMS resistive sensor. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE)
2010 Linearization circuit for transducers for nonlinear reponses. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Modelling of an Electromagnetic intake & exhaust control hybrid engine. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Design of capacitive measuring systems for high frequency band sensor transducer. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 Identification of Linearized Regions of Non-Linear Transducers Responses. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2010 Design of multi-band passive RFID tag antenna. In: International Conference on Computer and Communication Engineering (ICCCE 2010)
2009 Rain fade and it's effect analysis for earth-to-satellite microwave link based on measured rainfall statistics in Bangladesh. In: IEEE 9th Malaysia International Conference on Communications (MICC 2009)
2009 Design of composite right/left-handed (CRLH) transmission line (TL) based leaky-wave array antenna. In: Proceedings of 2009 IEEE International Conference on Antennas, Propagation and Systems (INAS 2009)
2009 Reconfigurable patch antenna by RF mems switches. In: International Symposium on Mechatronics and its Applications (ISMA09)
2009 Effects of linear array antenna parameters to the performance of LMS beamforming algorithms . In: Proceedings of the 7th International Conference on Robotics, Vision, Signal Processing & Power Applications (RoViSP 2009)
2009 Multivariable transducer interfacing circuit for wireless monitoring of smart implants . In: XIX IMEKO World Congress, Fundamental and Applied Metrology
2009 Reconfigurable patch antenna by RF MEMS switches. In: 6th International Symposium on Mechatronics and its Applications (ISMA '09)
2008 A non-contact capacitance type level transducer for liquid characterization. In: International Conference on Computer and Communication Engineering 2008
2006 Design of MEMs-based reconfigurable antenna. In: International Conference on MEMS and Nanotechnology (ICMN'06)

Book

Book Section

2017 Wireless structural health monitoring system by capacitor sensing technique. In: IAENG Transactions on Engineering Sciences, Special Issues for the International Association of Engineering Conferences 2016 World Scientific . ISBN 9789813226197 , pp.168-178
2011 CMOS operational amplifier for capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.95-101
2011 Mathematical model for contactless measurement. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.102-106
2011 UWB pulse generation,shaping and analysis . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.133-137
2011 A mathematical study of a thermistor astable multivibrator in a linearization technique. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.113-116
2011 A study of linearization technique using a nonlinear thermistor. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.117-122
2011 2.45 Ghz passive RFID tag antenna mounting on various platforms . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.201-215
2011 Piece-wise linear analog to digital (PLADC) converter process . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.239-247
2011 Design and implementation of an optimal fuzzy logic controller using egentic algorithm . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.249-264
2011 MVL ADC design and simulation. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.153-158
2011 Transducers-to-microcntroller interfaces-software solution approach . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.277-290
2011 MVL design and current mode circuit elements. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.159-163
2011 UWB pulse generation and shaping: analysis and simulation results. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.173-176
2011 Implementation of capacitance to voltage converter for capacitive transducers. In: Selected readings in computing and telecommunications IIUM Press . ISBN 9789670225814 , pp.255-273
2011 Simulations of resistance variations to pulse generator circuits. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.177-183
2011 MEMS surface acoustic waves oscillator. In: Selected topics in advanced electronics IIUM Press . ISBN 9789674181536 , pp.23-36
2011 Basic concept of inductance for inductive transducers . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.59-63
2011 Application and case studies of magnetic induction . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.343-344
2011 Magnetic properties for magnetic transducer . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.65-70
2011 Overview of Radio Frequency Microelectromechanical systems reconfigurable antennas. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.450-457
2011 Magnetic hysteresis theory :application perspective . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.71-74
2011 The principle of resistive sensing . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.75-81
2011 Ultra wideband antenna with band notch using asymmetrical feedline. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.56-62
2011 Inductive sensor. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.1-7
2011 Design of symmetrical fed patch UWB antenna using partial ground and stairs . In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.22-32
2011 Design of unsymmetrical fed patch UWB antenna with unsymmetrical slotted ground . In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.49-55
2011 Multi-band reconfigurable antenna using RF MEMS switch. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.63-68
2011 Multi-band planar patch antenna. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.69-75
2011 Design of capacitive measuring system for high frequency band sensor transducer. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.83-88
2011 Tuning fork type planar antenna. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.76-82
2011 Leaky-wave array antenna. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.83-88
2011 Overview of smart antenna systems. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.89-96
2011 Direction of arrival algorithms for array antenna design. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.97-107
2011 Analysis of beamforming algorithms. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.108-120
2011 Design of linear array antenna for smart antenna application. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.121-136
2011 Design of symmetrical fed patch UWB antenna using slotted partial ground and stairs. In: Antennas and propagation: Modeling, simulation & measurements IIUM Press . ISBN 9789674181383 , pp.33-39
2011 Inductive power system for energy harvesting. In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.45-51
2011 RC circuit response. In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.1-6
2011 Principle of capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication IIUM Press . ISBN 9789674181710 , pp.89-94