Staff Directory


S. M. A. Motakabber

Academic Qualification

  • Ph.D in Electrical, Electronics & Systems Engineering - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • M.Sc in Applied Physics & Electronics - Masters Degree, University of Rajshahi
  • B.Sc in Applied Physics & Electronics - Bachelor Degree, University of Rajshahi

S. M. A. Motakabber (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


amotakabber@iium.edu.my
4599


Expert Profile


S. M. A. Motakabber who was born in Naogaon, Bangladesh received the BSc (Honours) and Master's degrees from the University of Rajshahi in 1986 and 1987, and Ph.D from University Kebangsaan Malaysia in 2011. He served as a scientific officer at the Bangladesh Atomic Energy Commission, and Bangladesh Scientific and Industrial Research, Dhaka from 1991-1992 and 1992-1993, respectively.
He started his teaching career as a lecturer in the Department of Applied Physics and Electronics, University of Rajshahi in 1993. The following year he was appointed an Assistant Professor in the same department. He joined as an Associate Professor in the Department of Computer and Communication Engineering at International Islamic University Chittagong in 2003; also served as Head of the Department and Dean of the Engineering Faculty.
He served as an Associate Professor in the Department of Applied Physics and Electronic Engineering from 2008 to 2012 at the University of Rajshahi. Dr. Motakabber joined as an Assistant Professor in the Department of Electrical and Computer Engineering at the International Islamic University Malaysia (IIUM) in 2012.
He received more than one million Ringgit Malaysia research grants from the Malaysian Government as project leader and co-researcher. He was involved as a consultant in Solar Energy Research Institute, University Kebangsaan Malaysia in 2013. He has supervised eight Master students and attended more than 10 international conferences as a presenter. Besides, he has published about 20 research articles in peer reviewed journals, conferences and a book.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Electrical & Electronics


Professional Membership


  • 1995 - 2020: Member of Profesional Body / Association: (Life Member), Bangladesh Association for Advancement of Science (BAAS)
  • 2012 - 2021: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
  • 2016 - 2020: Member of Profesional Body / Association: (Member ), International Association of Engineers (IAENG)
  • 2017 - 2020: Member of Profesional Body / Association: (Member), Institution of Engineering and Technology (IET)
  • 2018 - 2020: Member of Profesional Body / Association: (Chartered Engineer (CEng)), The Institution of Engineering and Technology
  • 2023 - 2024: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
  • 2023 - 2024: Member of Profesional Body / Association: (Member), Institution of Engineering and Technology


Teaching Responsibilities


CONCEPTUAL ENGINEERING DESIGN 2023/2024
ELECTRICAL AND COMPUTER ENGINEERING LAB I 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2014/2015 2013/2014 2012/2013
ELECTRICAL ENGINEERING LAB 2017/2018 2016/2017 2015/2016
ELECTRICAL ENGINEERING LAB 2 2023/2024 2022/2023
ELECTRONIC CIRCUITS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011
ELECTRONICS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2009/2010
EMBEDDED SYSTEM DESIGN 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
EMBEDDED SYSTEMS 2016/2017
ENGINEERING LAB II 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
FINAL YEAR PROJECT I 2020/2021 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
FUNDAMENTALS OF ELECTRICAL AND ELECTRONIC 2023/2024
INTEGRATED DESIGN PROJECT 2019/2020 2018/2019
PROJECT I 2018/2019
RF DESIGN AND MICROWAVE SYSTEMS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018


Supervision


Design And Development Of A Phase Synchronous Inverter For Microgrid System Based On Electrostatic Generator.
Ph.D Completed 2019 Main Supervisor
Equal Area Of Stepped Waveform Generation Technique For Multilevel Inverter .
Ph.D Completed 2019 Co-supervisor
Design And Development Of Rfid Reader Front-End And Chipless Tag Using Ultra Wide Band Technology.
Ph.D Completed 2017 Co-supervisor
A New Carbon Nanotube Model For High Performance Logic Gates Circuit.
Ph.D Completed 2016 Co-supervisor
Secure Bio-Inspired Wireless Sensor Network Routing Algorithm For Iot.
Ph.D In Progress Main Supervisor
An Efficient Photovoltaic Power System For Renewable Energy Based On Combined Inverter And Dc Voltage Conditioner Hybrid Approach.
Ph.D In Progress Main Supervisor
Development Of A Risc Processor-Based Data Acquisition System For 3d Vibration Analyzer.
Ph.D In Progress Main Supervisor
Efficient Multiprocessor Interface For High Speed And Low Power Complex Soc.
Ph.D In Progress Main Supervisor
Implementation Of Sustainable Iot-Based Hands-On Lab System For Engineering Teaching Methods In Times Of Crisis.
Ph.D In Progress Main Supervisor
Model Predictive Control-Based Energy Management Framework For Isolated Microgrid.
Ph.D In Progress Co-supervisor
Optimization Of Channel Estimation For Mimo-Ofdm Networks .
Master Completed 2023 Main Supervisor
Mathematical Morphology Algorithm For Smart Micro-Grid Deployment In Distributed Power Generation.
Master Completed 2022 Main Supervisor
Enhancement Of Eeg Signals Classification By Linear Discriminant Analysis For Brain Computer Interface.
Master Completed 2022 Co-supervisor
Development Of A Mosfet Based Electrostatics Field Detection Technique.
Master Completed 2021 Main Supervisor
High Performance Adaptive Pid Controller For Brushless Dc Motor .
Master Completed 2021 Main Supervisor
Internet Of Things (Iot) Based Smart Home Environmental Monitoring System.
Master Completed 2020 Main Supervisor
Effective Model For Pneumonia Detection From Chest X-Rays Using Deep Convolutional Neural Networks.
Master Completed 2020 Co-supervisor
Development Of Flexible Antenna For Breast Cancer Application.
Master Completed 2020 Co-supervisor
Design And Development Of An Arduino Microcontroller Based Rlc Meter.
Master Completed 2019 Main Supervisor
Wireless Mobile Charger Circuit Design.
Master Completed 2019 Co-supervisor
Voltage Controlled Oscillator For Ultra-Wide Band Rfid Reader .
Master Completed 2019 Co-supervisor
Bio Inspired Wsn Routing Algorithm For Iot.
Master Completed 2019 Co-supervisor
Li-Ion Battery Charge Balancing Circuit For Application In Electric Vehicles.
Master Completed 2018 Main Supervisor
Design Of A Phase Synchronous Inverter For Micro-Grid Systems.
Master Completed 2016 Co-supervisor
Development Of A Piezoelectric-Based Dc To Dc Converter For Micro Energy Harvesting System.
Master Completed 2015 Main Supervisor
Development Of An Iris Authentication Algorithm For Personel Identification.
Master Completed 2015 Main Supervisor
Advanced Techniques For Classification Of Multi - Cahnnel Eeg Signals For Brain Computer Interface.
Master Completed 2015 Co-supervisor
Design And Development Of Planar Wideband Patch Antenna For Uhf Rfid Tag.
Master Completed 2014 Co-supervisor


Research Projects


Completed
2021 - 2022 Empowering the community through sustainable health: An applied theory of Maqasid al-Shari?ah
2018 - 2022 Verifying the Mechanical Power Transformation Effectiveness of Brushless DC Motor and its Characteristics
2017 - 2019 Development of FPGA based RFID Reader for UWB Chipless Tag
2017 - 2017 Silicon Solar Cell Mask Design
2016 - 2019 Development of a Parallel biosensing system for personalized and pointof-care chemotherapy treatment
2016 - 2019 Novel Tactile Sensory Surface Mat with Electrical Stimulation (SMES)for the Prevention of Pressure Ulcers due to Immobility
2015 - 2018 Characterization for Verification of Electrostatic Generator's Effectiveness for Power Generation
2014 - 2017 Design and Development of Chipless Ultra Wideband RFID System
2013 - 2015 Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - 2015 Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates
2012 - 2014 Design and Development of Advanced Techniques for Brain Computer Interface using Multi-Channel Electroencephalography (EEG) Signal
On-Going
2018 - Present Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications


Award & Recognition


22 Dec, 2022 KERICE 2022 (Gold Award) - KOE, IIUM University
24 Dec, 2020 Final Year Project 2 Seminer Presentation - IEEE Instrumentation & Measurement Society KCDIO
03 Apr, 2019 Chartered Engineer (CEng) - Institution of Engineering and Technology (IET) International
03 Apr, 2018 Chartered Engineer (CEng) - Institution of Engineering and Technology (IET) International


Publications


Article

2024 Advancing system integration: verilog-based hardware implementation of an asic interface for three amba processors. IIUM Engineering Journal, 25 (1) pp. 253-262
2024 Extendable high-gain DC-DC Converter for storage battery and photovoltaic cell. IIUM Engineering Journal, 25 (1) pp. 263-273
2023 An adaptive channel estimation scheme based on redundancy minimization for filtered OFDM networks. TELKOMNIKA Telecommunication Computing Electronics and Control, 21 (1) pp. 70-76
2023 Dual–adaptive redundancy minimisation-based channel estimation method for MIMO OFDM systems. Asian Journal of Electrical and Electronic Engineering, 3 (1) pp. 20-26
2023 Efficient dual mode arbitration scheme for multiprocessor hardware interface in System-on-Chip. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (4) pp. 1096-1109
2023 Lithium-ion battery thermal management for electric vehicles using phase change material: a review. Results in Engineering, 20 () pp. 1-12
2023 MATLAB-based vibration signal processing for fault diagnosis. Asian Journal of Electrical and Electronic Engineering (AJoEEE), 3 (2) pp. 27-32
2023 Performance inspection of high gain chopper designed to extract optimum output of photovoltaic source. International Journal of Power Electronics and Drive Systems, 14 (4) pp. 2204-2216
2023 Secure IoT routing through manifold criterion trust evaluation using ant colony optimization. International Journal of Advanced Computer Science and Applications (IJACSA), 14 (11) pp. 131-143
2022 A low-profile flexible planar monopole antenna for biomedical applications. Engineering Science and Technology, an International Journal, 35 () pp. 1-12
2022 A new topology of high-efficiency DC-DC hybrid boost SEPIC converter for PV cell. Asian Journal of Electrical and Electronic Engineering, 2 (2) pp. 1-10
2022 A secure trust aware ACO-Based WSN routing protocol for IoT. Advances in Science, Technology and Engineering Systems, 7 (3) pp. 95-105
2022 Adjacent and diagonal coupling mechanism by even-branched resonator for adjustable radiometric filtering applications. Measurement, 202 () pp. 1-12
2022 An adaptive channel estimation scheme based on redundancy minimization for filtered OFDM networks. TELKOMNIKA, 21 (1) pp. 70-76
2022 Characteristic study for wireless charging system. Asian Journal of Electrical and Electronic Engineering, 2 (1) pp. 9-16
2022 Design and analysis of a microstrip patch antenna at 7.5 GHz for X-band VSAT application. IIUM Engineering Journal, 23 (1) pp. 60-67
2022 Fuzzy logic and pi controller for photovoltaic panel battery charging system. IIUM Engineering Journal, 23 (2) pp. 138-153
2022 GPS and GSM based vehicle tracker. Asian Journal of Electrical and Electronic Engineering, 2 (1) pp. 17-24
2021 A review: energy storage system and balancing circuits for electric vehicle application. IET Power Electronics, 14 (1) pp. 1-13
2021 IoT-Based lab system for teaching methods in times of crisis. Asian Journal of Electrical and Electronic Engineering (AJoEEE), 1 (2) pp. 14-19
2021 Multi‐resonator application on size reduction for retransmission‐based chipless RFID tag. Electronics Letters, 57 (1) pp. 26-29
2021 Multiprocessor arbitration for AMBA interface in ASIC. Asian Journal of Electrical And Electronic Engineering, 1 (2) pp. 20-27
2021 Piezoelectric module based electronic gadget charging systems. Technology Reports of Kansai University, 63 (02) pp. 7197-7202
2021 Review of electric vehicle energy storage and management system: Standards, issues, and challenges. Journal of Energy Storage, 41 () pp. 1-10
2020 Active voltage balancing circuit using single switched-capacitor and series LC resonant energy carrier. Electronics Letters, () pp. 1-3
2020 Control BLDC Motor Speed using PID Controller. International Journal of Advanced Computer Science and Applications, 11 (3) pp. 477-481
2020 Effective pneumonia detection using ResNet based transfer learning. Test Engineering and Management, 82 (Jan/Feb) () pp. 15146-15153
2020 Efficient and scalable ant colony optimization based WSN routing protocol for IoT. Advances in Science, Technology and Engineering Systems, 5 (6) pp. 1710-1718
2020 Modeling and performance analysis of an adaptive PID speed controller for the BLDC Motor. International Journal of Advanced Computer Science and Applications (IJACSA), 11 (7) pp. 272-276
2019 A miniaturized hairpin resonator for the high selectivity of WLAN bandwidth. Bulletin of Electrical Engineering and Informatics, 8 (3) pp. 916-922
2019 A novel bio-inspired routing algorithm based on ACO for WSNs. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 718-728
2019 A planar parallel slotted circular disk passive UWB-RFID tag. ARPN Journal of Engineering and Applied Sciences, 14 (6) pp. 1149-1154
2019 Design and control of a single phase synchronous inverter for microgrid. International Journal of Advanced Science and Technology, 28 (14) pp. 414-418
2019 Design and implementation of a series switching SPSI for PV cell to use in carrier based grid synchronous system. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 349-366
2019 Microstrip patch antenna with defected ground structure for biomedical application. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 588-597
2019 Plans for planar: phase-noise reduction techniques in voltage-controlled oscillators. IEEE Microwave Magazine, 20 (11) pp. 92-108
2019 PLL-based 3φ inverter circuit for microgrid system operated by electrostatic generator. IIUM Engineering Journal, 20 (1) pp. 177-193
2018 A single LC tank based active voltage balancing circuit for battery management system. IIUM Engineering Journal, 19 (1) pp. 158-167
2018 Design of an interdigital structure planar bandpass filter for UWB frequency. International Journal of Electrical and Computer Engineering (IJECE), 8 (3) pp. 1654-1658
2017 A narrow band BPF for UWB RFID reader circuit for frequency extraction. International Journal of Engineering and Information Systems, 1 (7) pp. 104-112
2017 A series regeneration converter technique for voltage balancing of energy storage devices. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2) pp. 475-481
2017 A zero crossing PWM controller of a full bridge single phase synchronous inverter for microgrid systems. International Journal of Engineering and Information Systems, 1 (6) pp. 202-211
2017 An enhanced zero crossing based HVAC phase synchronous inverter for electrostatic generator in microgrid systems. Indonesian Journal of Electrical Engineering and Informatics, 5 (4) pp. 285-294
2017 Design and development of wideband patch antenna for UHF RFID metal mountable tag. International Journal of Electronics Letters, 5 (1) pp. 82-98
2017 Design and simulation of a PWM based phase synchronous inverter for utility grid systems with 20km feeder line. Scientific Research Journal, 14 (2) pp. 17-34
2017 Linear microstrip resonator for UWB RFID tag. International Journal of GEOMATE, 13 (40) pp. 167-172
2017 Microstrip coupled line bandpass filter with radial stubs for narrow-band applications. International Journal of GEOMATE, 13 (40) pp. 183-188
2017 Synchronisation of output voltage waveforms in phase synchronous inverter with LCL filter for smart grid systems. Pertanika Journal of Science & Technology (JST), 25 (Special issue) pp. 145-156
2016 Development of piezoelectric micro-energy harvesting system using voltage doubler. ARPN Journal of Engineering and Applied Sciences, 11 (1) pp. 351-355
2016 Simulation and evaluation of a phase synchronous inverter for micro-grid system. ARPN Journal of Engineering and Applied Sciences, 11 (1) pp. 356-361
2015 A compact wideband patch antenna for ultra high frequency RFID tag. Automatika ‒ Journal for Control, Measurement, Electronics, Computing and Communications, 56 (1) pp. 76-83
2015 An approach of differential capacitor sensor for landslide monitoring. International Journal of GEOMATE, 9 (2) pp. 1534-1537
2015 Bridge scour monitoring by coupling factor between reader and Tag antennas of RFID system. International Journal of GEOMATE, 8 (2) pp. 1328-1332
2015 Classification of multichannel EEG signal by linear discriminant analysis . Advances in Intelligent Systems and Computing, 330 () pp. 279-282
2015 Design of a wideband inductively coupled loop feed patch antenna for UHF RFID tag. Radioengineering, 24 (1) pp. 38-44
2015 FPGA implementation of multiplier for floating-point numbers based on IEEE 754-2008 standard. Journal of Communications Technology, Electronics and Computer Science, 1 () pp. 1-6
2015 Microstrip spiral resonator for the UWB chipless RFID tag. Advances in Intelligent Systems and Computing, 366 () pp. 355-358
2015 Parametric study of UWB chipless RFID tag: an impulse interrogation approach. ARPN Journal of Engineering and Applied Sciences, 10 (21) pp. 10138-10142
2014 Design and development of computer controlled active sonar system. Technical Gazette, 21 (4) pp. 751-756
2014 Design of a planar wideband patch antenna for UHF RFID tag. Microwave and Optical Technology Letters, 56 (7) pp. 1579-1584
2013 A low-cost PC-based range finder system. International Journal of Computer and Communication Engineering, 2 (6) pp. 693-695
2013 Comparative data compression techniques and multi-compression results. IOP Conference Series: Materials Science and Engineering, 53 (012081) pp. 1-7
2013 Crystal controlled CMOS oscillator for 13.56 MHz RFID reader. Journal of Microelectronics, Electronic Components and Materials, 43 (2) pp. 119-123
2013 Design and development of a compact wideband C-shaped patch antenna for UHF RFID tag. Research Journal of Applied Sciences, Engineering and Technology, 6 (12) pp. 2118-2126
2013 Design and Development of a Simulator for Modelling Carbon Nanotube. IOP Conference Series: Materials Science and Engineering, 53(1) (012049) pp. 1-6
2013 Development of a web-based financial application system. IOP Conference Series: Materials Science and Engineering , 53 (012080) pp. 1-8
2013 Edge detection techniques for iris recognition system. IOP Conference Series: Materials Science and Engineering, 53(1) (012041) pp. 1-3
2013 Investigation on carbon nanotube electronics structure . Pensee Journal, 75 (11) pp. 123-129
2013 TCP/IP based networking for telemedicine. International Journal of Computer and Communication Engineering, 2 (6) pp. 689-692
Conference or Workshop Item

2023 A trust aware secure ant colony optimization based routing algorithm for Internet of Things. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Design and evaluation of a high-performance extensible DC-DC converter integrated with ANN based MPPT controller. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Development of high-performance Single Inductor Quadratic Multilevel DC-DC Step-Up Converter with MPPT Controller. In: 2023 3rd International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST),
2022 A new high step-up DC-DC converter for photovoltaic application: switch inductor cell combined with voltage doubler circuit. In: 2022 International Conference on Recent Progresses in Science, Engineering and Technology (ICRPSET),
2022 Control speed of BLDC motor using PID. In: 2022 IEEE 18th International Colloquium on Signal Processing & Applications (CSPA),
2022 Fairness in multiprocessor hardware access to system-on-chip. In: IEEE 5th International Symposium in Robotics and Manufacturing Automation,
2021 A Computationally Efficient Least Square Channel Estimation Method for MIMO-OFDM Systems. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Advanced Adaptive PID Controller for BLDC Motor. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Feature Extraction of EEG Signal by Power Spectral Density for Motor Imagery Based BCI. In: 8th International Conference on Computer and Communication Engineering, ICCCE 2021,
2021 Secure ACO-Based Wireless Sensor Network Routing Algorithm for IoT. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Smart arbitration system for multiprocessor AMBA interface in system on chip. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Smart Microgrid approach for Distributed power generation of renewable energy. In: 2021, 8th International Conference on Computer and Communication Engineering (ICCCE),
2020 A comparative study of electrochemical battery for electric vehicles applications. In: 2019 IEEE International Conference on Power, Electrical, and Electronics and Industrial Applications (PEEIACON),
2020 Adaptive PID controller using for speed control of the BLDC motor. In: 2020 IEEE International Conference on Semiconductor Electronics (ICSE),
2020 Utilizing of flower pollination algorithm for brushless DC motor speed controller. In: 2020 Emerging Technology in Computing, Communication and Electronics (ETCCE),
2019 A wideband millimeter-wave printable antenna on flexible substrate for breast cancer imaging. In: 2019 7th International Conference on Mechatronics Engineering (ICOM) 2019,
2019 An Arduino microcontroller based RLC meter. In: 2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2019 Development of smart chicken poultry farm using RTOS on Arduino. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019),
2019 Energy-efficient scalable routing protocol based on ACO for WSNS. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19,
2018 A compact bandpass filter using microstrip hairpin resonator for WLAN applications. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018,
2018 A noble approach of ACO algorithm for WSN. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018,
2018 A rectangular inset-fed patch antenna with defected ground structure for ISM band. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018,
2018 Carrier based synchronous control and performance analysis of an S-PSI using PV for microgrid applications. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018,
2018 Simulation and modeling of high voltage DC to AC PWM inverter for electrostatic generator. In: 2018 International Conference on Aerospace, Mechanical and Mechatronic Engineering 2018,
2017 A PWM controller of a full bridge single-phase synchronous inverter for micro-grid system. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17),
2017 Characteristics Analysis of Electrostatic Generator. In: ISERD - International Conference on Recent Innovations in Engineering and Technology (ICRIET),
2017 Design and analysis of planar spiral resonator bandstop filter for microwave frequency. In: 6th International Conference on Mechatronics - ICOM'17,
2017 Design and simulation of a low noise PWM based phase synchronous inverter for microgrid. In: 2017 IEEE Regional Symposium on Micro and Nanoelectronics ( RSM),
2017 Generating an energy efficient discrete chirp signal for UWB chipless RFID reader circuit. In: International Conference On Electrical and Electronics Engineering (ICEEE),
2017 Reduction of phase noise for inductor based ultra-wide band voltage controlled oscillator. In: IEEE International Conference on Communication, Control, Computing and Electronics Engineering 2017,
2016 A narrow band microstrip bandpass filter for RF Front-End of an UWB RFID reader circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016),
2016 A new approach for generating energy efficient discrete chirp signal of an UWB RFID reader circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016),
2016 Design and analysis of a buck-boost converter circuit for piezoelectric energy harvesting system. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Design and simulation of a PWM based phase synchronous inverter for utility grid systems with 20km feeder line. In: 3rd International Conference on Science and Social Research (CSSR 2016),
2016 Design of a switching mode three phase inverter. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Detection of data from the UWB microstrip resonator type RFID tag. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015,
2016 Low noise inverter for poly phase microgrid system. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Phase synchronous inverter for microgrid system. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Stepped waveform generation for multilevel inverter topology applications. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Synchronization of output voltage waveforms in phase synchronous inverter with LCL filter for smart grid systems. In: 3rd International Conference on Science and Social Research (CSSR 2016),
2015 Analytical approximate solutions of the duffing-relativistic oscillator . In: The Third Intl. Conf. On Advances in Computing, Control and Networking-ACCN 2015,
2015 Classification of multichannel EEG signal by linear discriminant analysis. In: 23rd International Conference on Systems Engineering,
2015 Development of piezoelectric micro-energy harvesting system using voltage doubler. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 ,
2015 NEGF-based transport phenomena for semiconduncting CNTFET. In: 2015 5th National Symposium on Information Technology: Towards New Smart World (NSITNSW),
2015 Simulation and evaluation of a phase synchronous inverter for micro-grid system. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 ,
2015 Tag for UWB Chipless RFID: a single antenna approach. In: 10th IEEE 2015 Regional Symposium on Micro and Nanoelectronics (RSM 2015),
2014 Bridge scour monitoring by using RFID system. In: 4th International Conference on Geotechnique, Construction Materials and Environment,
2014 Classification of multichannel EEG signal by single layer perceptron learning algorithm. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2014 CNTFET SPICE model: design of a carbon nanotube field effect transistor. In: 5th International Conference on Computer & Communication Engineering 2014,
2014 Differential capacitor sensor of wireless sensor network for landslide monitoring. In: 4th International Conference on Geotechnique, Construction Materials and Environment,
2014 Integrated si lens antenna with planar log-spiral feed for THz band. In: 5th International Conference on Computer and Communication Engineering,
2014 Microstrip spiral resonator for the UWB chipless RFID tag. In: The 23rd International Conference on Systems Engineering,
2014 Parameter optimization for piezoelectric micro-energy harvesting system. In: 5th International Conference on Computer and Communication Engineering,
2014 Spiral resonator for ultra wide band chipless RFID tag. In: 5th International Conference on Computer and Communication Engineering,
2014 Template matching techniques for iris recognition system. In: 5th International Conference on Computer and Communication Engineering,
2014 Three phase three layer phase synchronous inverter for microgrid system. In: 5th International Conference on Computer and Communication Engineering,
2013 A planar wideband inductively coupled feed patch antenna for UHF RFID tag. In: The 2013 IEEE International Conference on RFID Technologies and Applications,
2013 A planar wideband microstrip patch antenna for UHF RFID tag. In: The 2013 IEEE International Conference on Space Science and Communication (IconSpace),
2013 Analysis of CNT electronics structure to design CNTFET. In: 2013 IEEE 5th International Nanoelectronics Conference (INEC),
2013 Comparative data compression techniques and multi-compression results. In: 5th International Conference on Mechatronics (ICOM'13),
2013 Development of a position detection technique for UWB chipless RFID tagged object. In: 2013 International Conference on Computing, Electrical and Electronics Engineering (ICCEEE 2013),
2013 Development of a web based financial application system. In: 5th International Conference on Mechatronics,
2013 Edge detection techniques for iris recognition system. In: 5th International Conference on Mechatronics (ICOM'13),
2013 Modeling of optimum chiral carbon nanotube using DFT. In: 13th IEEE International Conference on Nanotechnology,
2013 Modeling of small Band-gap CNT for designing of faster switching CNTFET. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium,
2013 Performance analysis of different techniques for brain computer interfacing. In: International Conference on Computing, Electrical and Electronic Engineering,
2013 Photoplethysmography based remote health monitoring system. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2013),
2013 Real-time bridge scour monitoring system by using capacitor sensor. In: 3rd International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2013),
2013 Wireless sensor network for landslide monitoring. In: 3rd International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2013),
Book

2018 Fundamentals of microelectronic circuits, 2nd Edition. Pearson Malaysia, ISBN: 978-967-349-755-3
2017 Analog front-end: UWB chipless RFID system. IIUM Press, International Islamic University Malaysia, ISBN: 9789674184933
2017 Piezoelectric micro-energy harvesting technique. IIUM Press, International Islamic University Malaysia, ISBN: 978-967-418-548-0
2012 Fundamentals of microelectronic circuits. Pearson Malaysia Sdn Bhd, ISBN: 978-967-349-202-2
Monograph

2018 Characterization for verification of electrostatic generator's effectiveness for power generation. In: International Islamic University Malaysia,