Anis Nurashikin Nordin, a former student of the Bukit Bintang Girls School, started her academic career as an Assistant Lecturer in International Islamic University Malaysia in 1999, upon completion of her Bachelors degree in Computer and Information Engineering in the same year. She obtained both her Master of Science and Doctor of Science in Computer Engineering from the George Washington University, Washington D.C. in 2002 and 2008 respectively.
Her field of specialization, both for her Masters and doctorate degree was in Microelectronics and VLSI. She was appointed as an Associate Professor in the Department of Electrical and Computer Engineering, in 2012. She also served as the Head of Research in the Kulliyah of Engineering from 2011 till 2013.
She is a senior member of Institute of Electrical and Electronics Engineers. She is passionate about her research and her main research interests are in the areas of biosensors, microfluidics, lab-on-chip devices, Analog VLSI, RF-MEMS, surface acoustic wave resonators and oscillators in particular. She has won the IIUM Quality Day Most Outstanding Researcher Award in 2014 (Science and Technology) and IIUM Quality Day Most Promising Researcher Award in 2010 (Science and Technology).
She also won numerous medals both internationally and locally for her research in developing personalized sensors for cancer chemotherapeutics. She has also been invited as a visiting scholar in renowned universities all over the world, namely the City College of New York, USA (2010 & 2015), Linkoping University, Sweden (2013), University of Twente, Holland (2014) and Griffith University, Australia (2011). Dr. Anis has also served as a technical consultant for UNITEN and Silterra (M) Sdn. Bhd.

• Natural Science ~ Mathematical Sciences ~ Mathematics and Statistics for ICT and Industries ~ Circuits and Networks - Surface Acoustic Wave Resonators and Filters
• Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Wafer Reliability
• Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Microelectronics - MEMS and VLSI
• Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Robotics and Mechatronics - Analog and Mixed Signal Design

• 1999 - 2012: Member of Profesional Body / Association, Institute of Electrical and Electronics Engineers (IEEE)
• 2010 - 2012: Member of Profesional Body / Association, Board of Engineers Malaysia
• 2012: Member of Profesional Body / Association: (Member), Institute of Engineers Malaysia
• 2015: Member of Profesional Body / Association: (Member), Institute of Engineering Technology

ADVANCED TOPICS IN VLSI DESIGN	2015/2016 2014/2015 2012/2013 2011/2012 2010/2011 2009/2010
COMPUTER AND INFORMATION ENG. LAB II	2010/2011 2009/2010 2008/2009
ELECTRONICS	2016/2017 2015/2016 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
ENGINEERING LAB I	2008/2009
ENGINEERING LAB II	2014/2015 2010/2011 2009/2010 2008/2009
FINAL YEAR PROJECT 1	2019/2020 2018/2019
FINAL YEAR PROJECT I	2019/2020
FINAL YEAR PROJECT II	2022/2023 2021/2022
INTEGRATED DESIGN PROJECT	2022/2023 2021/2022 2020/2021
MICROELECTROMECHANICAL SENSORS	2014/2015
MICROELECTROMECHANICAL SENSORS, ACTUATORS AND SYSTEMS	2011/2012
MICROELECTRONIC CIRCUITS	2002/2003
PROJECT I	2018/2019
VLSI DESIGN	2021/2022 2020/2021 2019/2020 2018/2019 2016/2017 2015/2016 2014/2015
VLSI MODELING TECHNIQUES	2012/2013 2010/2011

Completed

2019 - 2019	Training of DIY Conductive Inkjet Printing for MEMs electrodes
2019 - 2022	A Highly Sensitive Sensing Device using Stretchable Circuit for Facial Expression Detection
2019 - 2020	SURVEY ON PUBLIC AWARENESS OF SCIENCE, TECHNOLOGY AND INNOVATION MALAYSIA 2019
2019 - 2019	Low Cost Approaches to Printable Electronics
2018 - 2020	Two-Dimensional Stretchable Strain for Facial Expression-Driven Rehabilitation System (AOARD GRANT)
2018 - 2022	Numerical formulation and physical investigation of molecules motion for precise controlling of liquid flow on paper-based devices.
2018 - 2022	Verifying the Mechanical Power Transformation Effectiveness of Brushless DC Motor and its Characteristics
2018 - 2022	Development of Printed Power Sources on Flexible Substrates
2018 - 2022	Investigation on performance of Electromical Supercapacitor with 3D graphene-based electrodes (AOARD GRANT)
2017 - 2020	Development of Flexible Piezoelectric Energy Harvester for Wearable Devices and Development of Printable, Flexible, Rechargeable Zinc Batteries for Powered Smart Card Application
2017 - 2020	Fundamental study of blood glucose solution models using a novel stepped impedance RF sensor for improved continuous monitoring of diabetic patients
2017 - 2020	Investigation of Electrosprayed Carbon-based Nanomaterials as Electrodes in Energy Storage Devices for Improved Microbial Fuel Cell
2017 - 2020	Theoretical modeling of lung cancer biomarkers in exhaled breath using silicon compatible electroacoustic microsensors
2016 -	A Qualitative Study on the Novel use of Electrical Stimulation for the Prevention of Pressure Ulcers due to Immobility
2016 - 2018	Development of A Stretchable Tactile Distribution Sensor
2016 - 2019	Development of a Parallel biosensing system for personalized and pointof-care chemotherapy treatment
2016 - 2019	An Investigation on the Piezoelectric Characteristics of Thin Film for Flexible Surface Acoustic Wave Ultraviolet Microsensor
2015 - 2018	Novel Theoretical Model of an electrochemical nanobiosensor for rapid detection of dengue
2015 - 2018	An Efficient Algorithm on Lossless Audio Compression using Optimized Linear Predictor and Entropy Coding for Multichannel Quranic Audio Recitation
2015 - 2018	Novel model of leakage current mechanisms in radiation hard Silicon Carbide Schottky Diodes
2014 - 2019	"Dengue-Screening" - Electromechanical Micro-total Analysis System (?TAS) for Sensitive and Rapic Detection of Dengue Fever
2014 - 2017	Design and Development of Chipless Ultra Wideband RFID System
2014 - 2016	Novel Method to Synthesize Polymeric Biphasic Micro-Particles Using Droplet Microfluidic Lab on a Chip
2013 - 2017	Novel Modelling Of A Bio-Analysis Platform (Biochip) With The Integrated Dielectrophoresis (Dep) And Magnetophoresis (Map) Forces For Particles Manipulations.
2013 - 2017	Exploration on CMOS Capacitance Based Structural Health Monitoring by Energy Harvested Wireless Sensor Networks
2013 - 2015	Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - 2016	Hierarchical Horizontally Cross-tiered Scheduling for Downlink in LTE-Advanced Mobile Telecommunication System
2013 - 2015	Optimised Multicast Support for Mobile Sender in Wireless Mesh Networks
2012 - 2015	Proof of Concept for a Novel Real Time, Hardware base Cancer Chemotherapeutics Kit Using MEMS Biosensor
2012 - 2015	Design and development of MEMS Acoustic Energy Harvester
2012 - 2014	Design and Development of Advanced Techniques for Brain Computer Interface using Multi-Channel Electroencephalography (EEG) Signal
2012 - 2015	Measurement of EMG Signal for the Correct Identification of Human Postures
2012 - 2015	A Development of a Top Down Silicon Nanoware into Field Effect Transistor
2012 - 2014	RU 2011: A Study of Major Muscles Activity During Performance of Salah (Prayer)
2012 - 2015	Hardware Implementation of a Novel Impedance Spectroscopy System for Cancer Cell Studies
2012 - 2015	Design and Development of Autonomous Assistive Devices using EMG Signal for Functional Rehabiliation
2012 - 2014	Design and Fabricate of a Low-Voltage RF-MEMS Switch in Standard CMOS Technology
2011 - 2015	Novel Vertically Integrated Nano GHz Surface Acoustic Wave Oscillator for RF Applications
2011 - 2012	Modelling and simulation of evanescent field characteristic of polymer waveguide structure for optical biosensor
2011 - 2013	Hardware Prototyping of Photoplethysmography Based Cardiac Monitoring Technique for Devising a Practical Remote Health Monitor
2009 - 2011	Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2009 - 2012	Development of Low-Loss CMOS Based RF Surface Acoustic Wave Resonator
2009 - 2013	MULTI-GB/S HIGH SPEED SERIAL TRANSCEIVER (HSST) SUITABLE AS PHYSICAL LAYER FOR PCIE 2.0, SATA 3.0 ANS USB 3.0 SUPPER SPEED APPLICATIONS
2009 - 2012	Modeling of a Novel Integrated Surface Acoustic Wave Resonator
2009 - 2012	Development of an Emergency Medical Care System for Cardiac Telemedicine Monitoring
2008 - 2011	Temperature Stabilization Methods for Surface Acoustic Wave Resonators
2008 - 2010	Design and Development of a novel MEMS bio-sensor for real-time study of bone deformation
2008 - 2011	Temperature Stabilization Methods for Surface Acoustic Wave Resonators
2008 - 2011	Novel Theoretical Model of a MEMS Biosensor for Real Time Study of the Cell Adhesion Process
2008 - 2010	Design and Development of Novel MEMS bio-sensor for real-time study of Bone Deformation

On-Going

2022 - Present	Nanosystem for Covid-19 DNA/Antibodies On The Spot Test (NACOTS) (CV02211032)
2022 - Present	Robust Analysis of Enhanced Photocurrent of Fe3O4/TiO2 for Photoelectrochemical Cell (PEC) Impedimetric Detection
2022 - Present	Expanding Project of the First South East Asian Frozen Zoo at IIUM for Endangered Species in Malaysia
2021 - Present	Hydrophilic study of Carbon Nanotubes-Chitosan hybrid as functional material for Volatile Organic Compounds (VOCs) Detection
2021 - Present	Stretchable chitosan-foliated graphite biocomposite as piezoresistive functional material towards enhanced strain sensing response
2021 - Present	Enhanced Peak Current in Nicotine Detection using Electrochemical-based Screen Printed Electrodes Modified with Chitosan-Reduced Graphene Oxide Nanocomposite
2021 - Present	Stretchable Strain Sensor for Full Hand Pose Recognition Under Dexterous Articulation in Daily Activities for Tele-rehabilitation
2021 - Present	Enhanced Performance of Stretchable Body Coupled Antenna with High Permittivity Barium Titanate - Silicone Elastomer Composite for Biomedical Microwave Sensing and Imaging applications
2021 - Present	Design, Modeling and Characterization of Zinc-oxide piezoelectric nanogenerator on textile
2020 - Present	Design and Development of Stretchable Sensors for Facial Expressions
2020 - Present	Enhanced Nicotine Detection Using Electrochemical-based Screen-printed Carbon Electrodes Modified with Graphene-Based Materials
2020 - Present	Design and Development of Cytosensor for Personalized Chemotherapy Treatment
2020 - Present	Design and Development of Integrated QCM and EIS Dengue Hybrid Biosensor
2020 - Present	DESIGN AND DEVELOPMENT OF FLEXIBLE MILIMETER WAVE ANTENNA FOR RF ENERGY HARVESTER
2020 - Present	Quantitative Analysis of Photogenerated Charge under UV-irradiation of Fe3O4/TiO2 in Photoelectrochemical Cell
2020 - Present	DESIGN AND DEVELOPMENT OF STRECTHABLE ANTENNA FOR MSI APPLICATIONS
2020 - Present	Investigation of a Hybrid Piezoelectric and Radio Frequency (RF) Energy Harvester using Chitosan based Piezoelectric Thin Film for Self-Powered Health Care Wireless Sensors Network (HC-WSN)
2020 - Present	Design and Development of Screen Printed Potentiostat for Dengue Biosensor
2020 - Present	Design and Development of Screen Printed Carbon Electrodes (SPCEs) For Nicotine Sensor
2019 - Present	Portable and precise electrochemical-quartz crystal microbalance diagnostic system for early detection of dengue
2019 - Present	Investigating the Detection of Antibiotic Residual in Dairy Product using Printed Electrodes
2019 - Present	Microfabrication of Microfluidic Channel that Mimic Blood Vessel in the Hand (IIUM - University of Limoges (France) Joint Collaboration Programme)
2018 - Present	Interdigitated Electrode Patterning using Standard Photolithography and Wet Etching for Surface Acoustic Wave Sensor Based on ST Cut Quartz for Breath Analysis (IIUM - University of Limoges (France) Joint Collaboration Programme)
2018 - Present	Associating Electrocardiogram Signal with Driver Drowsiness Level in the Effort to Improve Road Safety
2018 - Present	A New Biometrics Authentication Method Based on Fingertips Epidermis Layer Thickness Measurement
2018 - Present	IIUM-UNIVERSITY OF LIMOGES(FRANCE) JOINT COLLABORATION PROGRAMME
2018 - Present	Development of Continuous-time Non-invasive Glucose Sensing System
2018 - Present	IIUM-UNIVERSITY OF LIMOGES (FRANCE) JOINT COLLABORATION PROGRAMME
2016 - Present	Magnetic Blood Cells Microseparator for Seggeregating and Harvesting of Single Cell on Lab on Chip Platform
2009 - Present	VSLI and MEMS Research Unit
2006 - Present	Bio-Process and Molecular Engineering Research Unit (BPMERU)
-	IIUM-University of Limoges (France) Joint Collaboration Programme
-	RF MEMS/CMOS Device/ Circuit Modeling and Simulation
-	RF-MEMS/CMOS-Device/Circuit Modeling and Simulation
-	Energy Harvester Device for Wireless Vibration Condition Monitoring

14 Oct, 2015	Gold Prize - EUWIIN	International
29 Oct, 2014	Silver Medal for Silicon Based Acoustic Wave Resonators - British Invention Show, London	International
29 Oct, 2014	Silver Medal for MicroFluidics Lab-On-A-Chip - British Invention Show, London	International
18 Jul, 2014	Outstanding Researcher Award (University) - IIUM	University
22 Feb, 2014	Gold Medal for Bioimpedance Spectroscopy System for Characterization of Cancer Cells - Malaysia Technology Expo 2014	National
06 Nov, 2013	Gold Medal - International Trade Fair Nuremberg, Germany	International
06 Nov, 2013	Bronze Medal for CMOS Surface Acoustic Wave Resonators - International Trade Fair Nuremberg, Germany	International
09 Mar, 2010	Promising Researcher Award - IIUM	University

Article

2023	Recent applications of molecularly imprinted polymers (MIPs) on screen-printed electrodes for pesticide detection. Journal of Electrochemical Science and Technology, 14 (1) pp. 1-14
2022	A review on the contamination of SARS-CoV-2 in water bodies: transmission route, virus recovery and recent biosensor detection techniques. Sensing and Bio-Sensing Research, 36 () pp.
2022	Application of real‑time cell analysis biosensor technology for drug cytotoxicity studies in primary lung cancer cells. Biomedical Materials & Devices, () pp. 1-12
2022	Flexible, Piezoelectric Aluminum-Doped Zinc Oxide Energy Harvesters with printed electrodes for wearable applications. International Journal of Sensors Wireless Communications and Control, 12 (1) pp. 48-68
2022	Low-cost and rapid prototyping of integrated electrochemical microfluidic platforms using consumer-grade off-the-shelf tools and materials. Lab on a Chip, 22 (9) pp. 1779-1792
2022	Mechanical durability of screen-printed flexible silver traces for wearable devices. Sensing and Bio-Sensing Research, 38 () pp. 1-7
2022	mmWave four-element mimo antenna for future 5G systems. Applied Sciences, 12 (9) pp. 1-12
2022	Performance analysis of optimized screen-printed electrodes for electrochemical sensing. International Journal of Integrated Engineering, 14 (3) pp. 250-261
2022	Portable electrochemical biosensors based on microcontrollers for detection of viruses: a review. Biosensors, 12 (8) pp.
2022	Portable electrochemical biosensors based on microcontrollers for detection of viruses: a review. Biosensors, 12 (8) pp. 1-21
2022	Smart android based home automation system using internet of things (IoT). Sustainability, 14 (17) pp. 1-17
2022	Systematic review study on application of Ion Imprinted polymer (IIP) in heavy metals detection. International Journal of Environmental Analytical Chemistry, () pp. 1-26
2022	Ultra-wideband pentagonal fractal antenna with stable radiation characteristics for microwave imaging applications. Electronics, 11 (13) pp. 1-11
2021	Advanced vapour sensing materials: existing and latent to acoustic wave sensors for VOCs detection as the potential exhaled breath biomarkers for lung cancer. Sensors and Actuators A: Physical, 329 (112792) pp.
2021	Effect of chitosan dissolved in different acetic acid concentration towards VOC sensing performance of quartz crystal microbalance overlay with chitosan. Materials Letters, 291 () pp. 1-4
2021	Fabrication and characterization of printed zinc batteries. Bulletin of Electrical Engineering and Informatics, 10 (3) pp. 1173-1182
2021	Impedance spectroscopy of adherent mammalian cell culture for biochemical applications: a review. IEEE Sensors Journal, 21 (5) pp. 5612-5627
2021	Screen-printed nickel–zinc batteries: a review of additive manufacturing and evaluation methods. 3D Printing and Additive Manufacturing, 8 (3) pp. 176-192
2021	Supercapacitor performance with activated carbon and graphene nanoplatelets composite electrodes, and insights from the equivalent circuit model. Carbon Trends, 5 () pp. 1-13
2020	An estimation of the coupling coefficient of the series inductive resonant wireless power transfer coils. Journal of Advanced Manufacturing Technology, 14 (1) pp.
2020	Control BLDC Motor Speed using PID Controller. International Journal of Advanced Computer Science and Applications, 11 (3) pp. 477-481
2020	Design and dimensional analysis of interdigital sensor for blood glucose measurement through non-invasive method. Journal of Advanced Manufacturing Technology, 14 (1) pp. 1-9
2020	Development of low cost screen-printed piezoresistive strain sensor for facial expressions recognition systems. Microelectronic Engineering, 234 () pp.
2020	Integrated multichannel electrochemical–quartz crystal microbalance sensors for liquid sensing. IEEE Access, 8 () pp. 3668-3676
2020	MEMS biosensor for monitoring water toxicity based on quartz crystal microbalance. Biointerphases, 15 (2) pp. 1-3
2020	Modeling and performance analysis of an adaptive PID speed controller for the BLDC Motor. International Journal of Advanced Computer Science and Applications (IJACSA), 11 (7) pp. 272-276
2020	Non-invasive glucose monitoring devices: a review. Bulletin of Electrical Engineering and Informatics, 9 (6) pp. 2609-2618
2020	Regenerating Muslim inventors – the present future. Ulum Islamiyyah: The Malaysian Journal of Islamic Sciences, 31 (August) pp. 1-18
2020	Review on strain sensors for detection of human facial expressions recognition systems. International Journal of Nanoelectronics and Materials, 13 (3) pp. 445-472
2020	The load reliant power transfer of the series-to-series inductive resonant wireless power transfer. Journal of Advanced Manufacturing Technology, 14 (1) pp.
2019	Application of Taguchi signal to noise ratio design method to ZnO thin film CMOS SAW resonators. IEEE Access, 7 () pp. 27993-28000
2019	Modeling and development of radio frequency planar interdigital electrode sensors. Bulletin of Electrical Engineering and Informatics, 8 (3) pp. 985-993
2019	The load reliant power transfer of the series-to-series inductive resonant wireless power transfer. Test Engineering and Management, 81 (November-December) pp. 5702-5708
2018	A novel design of a low-voltage low-loss T-match RF-MEMS capacitive switch. Microsystem Technologies, 24 (1) pp. 561-574
2018	A proposed resistance-to-time converter with switching impulse calibrators for application in resistive bridge sensors. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1) pp. 47-50
2018	Design and analysis of a boosted pierce oscillator using MEMS SAW resonators. Microsystems Technologies, 24 (1) pp. 587-594
2018	Modeling and development of screen-printed impedance biosensor for cytotoxicity studies of lung carcinoma cells. Medical & Biological Engineering & Computing, 56 (1) pp. 173-181
2018	Recent trends in dengue detection methods using biosensors. IIUM Engineering Journal, 19 (2) pp. 134-153
2018	The impact of scaling on single event upset in 6T and 12T SRAMs from 130 to 22 nm CMOS technology. Radiation Effects and Defects in Solids, 173 (11-12) pp. 1090-1104
2018	Verification of quartz crystal microbalance array using vector network analyzer and openQCM. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1) pp. 84-93
2017	A study on controllable aluminium doped zinc oxide patterning by chemical etching for MEMS application. Microsystems Technologies, 23 (9) pp. 3851-3862
2017	Content cytotoxicity studies of colorectal carcinoma cells using printed impedance sensors. Bulletin of Electrical Engineering and Informatics, 6 (4) pp. 317-326
2017	Design of a reconfigurable, modular and multi-channel bioimpedance spectroscopy system. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2) pp. 428-440
2017	Development of photo forensics algorithm by detecting photoshop manipulation using error level analysis. Indonesian Journal of Electrical Engineering and Computer Science, 7 (1) pp. 131-137
2017	Enhanced piezoelectric properties of aluminium doped zinc oxide thin film for surface acoustic wave resonators on a CMOS platform. Journal of Materials Science: Materials in Electronics, 28 (12) pp. 9132-9138
2017	Flexible and stretchable circuits for smart wearables. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8) pp. 117-122
2017	Highly sensitive Escherichia coli shear horizontal surface acoustic wave biosensor with silicon dioxide nanostructures. Biosensors and Bioelectronics, 93 () pp. 146-154
2017	Microfluidic concentration gradient for toxicity studies of lung carcinoma cells. Procedia Technology, 27 () pp. 153-154
2017	Prototype design of smart home system using internet of things. Indonesian Journal of Electrical Engineering and Computer Science, 7 (1) pp. 107-115
2017	Screen printed electromechanical micro-total analysis system (μtas) for sensitive and rapid detection of infectious diseases. Procedia Technology, 27 () pp. 101-102
2017	Securing electronic transactions via payment gateways: a systematic review. International Journal Internet Technology and Secured Transactions, 7 (3) pp. 245-269
2017	The influence of the electrode dimension on the detection sensitivity of electric cell–substrate impedance sensing (ECIS) and its mathematical modeling. Sensors and Actuators, B: Chemical, 247 () pp. 780-790
2017	Toxicity studies of agarwood essential oil in vero cells using electrical impedance sensor. Malaysian Journal of Fundamental and Applied Sciences, () pp. 540-545
2016	Optical-resonator-based biosensing systems: current status and future prospects. Nanobiosensors in Disease Diagnosis, 5 () pp. 41-50
2016	Possibility of using interdigital sensor (IDS) in estimating different level of blood glucose. Sindh University Research Journal (Science Series), 48 (4D) pp. 209-212
2015	Design, optimization and simulation of a low‑voltage shunt capacitive RF‑MEMS switch. Microsystems Technologies, () pp. 1-13
2015	Multi-frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies, 21 (9) pp. 1915-1922
2015	Multi‑frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies, 21 (9) pp. 1915-1922
2015	Piezoelectric thin films for double electrode CMOS MEMS surface acoustic wave (SAW) resonator. Microsystems Technologies, 21 () pp. 1931-1940
2015	Toxicity studies using mammalian cells and impedance spectroscopy method. Sensing and Bio-Sensing Research, 3 () pp. 112-121
2014	A lab-on-chip cell-based biosensor for label-free sensing of water toxicants. Lab on a Chip, (14) pp. 1270-1280
2014	Design and simulation of RF-CMOS SPST switch for reconfigurable RF front-end. International Journal of Advancement in Electronics and Electrical Engineering, 4 (1) pp. 13-23
2014	Mems-based oscillators: a review. IIUM Engineering Journal, 15 (1) pp. 1-15
2014	Silicon compatible acoustic wave resonators: design, fabrication and performance. IIUM Engineering Journal, 15 (2) pp. 23-41
2014	The study of cell attachment and spreading on polyaniline and gelatin using electric cell-substrate impedance sensing. Journal of Pure and Applied Microbiology, 8 (sp.ed) pp. 827-831
2013	A novel cell-based hybrid acoustic wave biosensor with impedimetric sensing capabilities. Sensors & Transducers Journal, 13 () pp. 3039-3055
2013	High quality acquisition of surface electromyography – conditioning circuit design. IOP Conference Series: Materials Science and Engineering , 53 () pp. 1-7
2013	Inductive loops for sensing position as signature signals. IOP Conference Series: Materials Science and Engineering, 53 () pp. 1-11
2012	Acoustic wave based MEMS devices for biosensing applications. Biosensors and Bioelectronics, 33 () pp. 1-9
2012	Fabrication of aluminium doped zinc oxide piezoelectric thin film on a silicon substrate for piezoelectric MEMS energy harvesters. Microsystems Technologies, 18 (11) pp. 1761-1769
2012	Optimization of zinc oxide thin films for silicon surface acoustic wave resonator applications. Advanced Materials Research, 518-23 () pp. 3772-3779
2012	Trench DMOS interface trap characterization by three-terminal charge pumping measurement. Microelectronics Reliability, 52 (12) pp. 2914-2919
2012	Vibration energy harvesting using single and comb-shaped piezoelectric beam structures: modeling and simulation. Procedia Engineering, 41 () pp. 1228-1234
2011	Design, simulation and fabrication of piezoelectric micro generators for aero acoustic applications. Microsystems Technologies, 17 (4) pp. 563-573
2011	Observation on responsive OCV variation od Zinc-Air cell with relative humidity content. IIUM Engineering Journal, 12 (5) pp. 79-86
2011	RF oscillator implementation using integrated CMOS surface acoustic wave resonators . Analog Integrated Circuits and Signal Processing, 68 (1) pp. 33-42
2011	Temperature control circuit for surface acoustic wave (SAW) resonators . IIUM Engineering Journal, 12 (2) pp. 99-109
2010	A comparative study on MEMS piezoelectric microgenerators. Microsystems Technologies, 16 (10) pp. 1673-1681
2010	UHF RFID antenna architectures and applications. Scientific Research and Essays, 5 (10) pp. 1033-1051
2009	Design and application of radio frequency identification systems. European Journal of Scientific Research, 33 (3) pp. 438-453
2009	Micro-hotplate based temperature stabilization system for CMOS SAW resonators . Microsystems Technologies, 15 (8) pp. 1187-1193
2009	RFID reader architectures and applications. Microwave Journal, 52 (12) pp. 24-34
2007	Modeling and fabrication of CMOS surface acoustic wave resonators. IEEE Transactions on Microwave Theory and Techniques, 55 (5) pp. 992-1001

Conference or Workshop Item

2022	A framework for self-organized learning environments to develop soft skills in geographically distributed and multicultural engineering teams. In: 2022 IEEE Global Engineering Education Conference (EDUCON),
2022	Evaluation of portable potentiostats for electrochemical measurements: Voltammetry and Impedance spectroscopy. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2022	Investigation of fluid flow system performance for biosensor application. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2022	Prototyping and early validation of an integrated, electrochemical and mass three-sensor array for dengue detection. In: 15th International Conference on Biomedical Electronics and Devices,
2021	Advanced Adaptive PID Controller for BLDC Motor. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021	Enhancing driver drowsiness detection for data acquisition stage using electrocardiogram. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021	Simulation of geometrical parameters of Screen Printed Electrode (SPE) for electrochemical-based sensor. In: IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2020	Adaptive PID controller using for speed control of the BLDC motor. In: 2020 IEEE International Conference on Semiconductor Electronics (ICSE),
2020	How to publish in high impact journals. In: Webinar Series: How to Publish in High Impact Journals,
2020	Marketing basics for technologists. In: Talk on Marketing Basics for Technologists,
2020	Utilizing of flower pollination algorithm for brushless DC motor speed controller. In: 2020 Emerging Technology in Computing, Communication and Electronics (ETCCE),
2019	Development of integrated electrochemical-quartz crystal microbalance biosensor arrays: towards ultrasensitive, multiplexed and rapid point-of-care dengue detection. In: 12th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2019,
2019	Rapid fabrication and characterization of PDMS microfluidics device using printed conductive silver ink. In: Conference on Biomedical and Advanced Materials, Bio-CAM 2017,
2019	The development of the fuzzy-based infant incubator. In: 5th International Conference on Green Design and Manufacture (IConGDM 2019),
2018	A novel design of low-voltage low-loss K-band RF-MEMS capacitive switch. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP),
2018	A proposed resistance-to-time converter with switching impulse calibrators for resistive bridge sensors. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017,
2018	Classical equivalent circuit characterization for a double-layer capacitor. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017,
2018	Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017,
2018	Fabrication and characterization of supercapacitor with activated carbon electrode and NaOH electrolyte. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2018	Frequency reliant wireless power transfer link for a applications of mWatts devices. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE),
2018	Inductive resonant power transfer and topology consideration. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017,
2018	Inter-digital sensor for non-invasive blood glucose monitoring. In: 2018 IEEE International Conference on Innovative Research and Development (ICIRD 2018),
2018	Optimized RC timing technique for accurate measurement of minute capacitance changes. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017,
2018	Preliminary exploration of cell-based SAW detection for water toxicity. In: ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE 2018),
2018	Simulation of RF patch antenna sensor for biological applications. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2018	Theoretical modelling of interdigitated electrode sensor for mammalian cell characterization. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2017	A K-band switched-line phase shifter using novel low-voltage low-loss RF-MEMS switch. In: 2017 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2017	Modeling of a novel biosensor with integrated mass and electrochemical sensing capabilities. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES),
2017	Negative bias temperature instability characterization and lifetime evaluations of submicron pMOSFET. In: 2017 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2017),
2017	Optimization of printing techniques for electrochemical biosensors. In: 11th Asian Conference on Chemical Sensors (ACCS2015),
2017	Rapid lard identification with portable electronic nose. In: 6th International Conference on Mechatronics - ICOM'17,
2017	Toxicity studies of natural product in vero cells using impedance monitoring. In: International Medical Device and Technology Conference (iMEDiTEC 2017),
2017	Wireless power transmission - exploring source to load inductive link under resonance and varying load condition. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016),
2016	Arduino-based biosensor impedance measurement. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016	Effect of single event upset on 6T and 12T 32NM CMOS SRAMs circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016),
2016	Hardware and circuit design of a vibrational cleaner. In: International Engineering Research and Innovation Symposium (IRIS),
2016	Implementation of CMOS oscillator for CMOS SAW resonator. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2016	Investigation of acoustic wavelength effects on silicon compatible Al doped ZnO SAW resonator. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016	Low power and high voltage swing cascode Pierce oscillator for MEMS SAW resonators. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP),
2016	Screen printed impedance biosensor for cytotoxicity studies of lung carcinoma cells. In: International Conference for Innovation in Biomedical Engineering and Life Sciences (ICIBEL2015),
2016	Serpentine microfluidic structures for concentration rradient generators. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP),
2016	STRETCHABLE lab-on-chip device with impedance spectroscopy capability for mammalian cell studies. In: ASME 2016 International Mechanical Engineering Congress and Exposition, IMECE 2016,
2016	Theoretical and simulated investigation of dielectric charging effect on a capacitive RF-MEMS switch. In: 12th IEEE International Conference on Semiconductor Electronics (ICSE 2016),
2015	Cytotoxicity studies of lung cancer cells using impedance biosensor. In: 2015 International Conference on Smart Sensors and Application (ICSSA),
2015	Dependence of preferred c-axis orientation on RF magnetron sputtering power for AZO/Si acoustic wave devices. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP),
2015	Fabrication of monolithic wheatstone bridge circuit for piezoresistive microcantilever sensor. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP),
2015	Modelling of microfluidics network using electric circuits. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2015),
2015	Optimization of focusing SAW propagation in piezoelectric medium for microfluidic applications. In: 2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2014	Acquisition of a very low voltage and a low frequency biomedical signal- frequency selective filter design. In: 5th International Conference on Computer & Communication Engineering 2014,
2014	Analysis of electromechanical coupling coefficient of surface acoustic wave resonator in ZnO piezoelectric thin film structure. In: 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2014	Bioimpedance spectroscopy system for characterization of cancer cells. In: 5th International Conference on Intelligent and Advanced Systems (ICIAS 2014) ,
2014	Design and implementation of an inductive-based human postures recognition system. In: 2014 International Conference on Biomedical Engineering and Sciences,
2014	Design and optimization of alLow-voltage shunt capacitive RF-MEMS switch. In: Source of the Document DTIP 2014 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 7056641,
2014	Design and simulation of 10 MHz MEMS oscillator. In: 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC),
2014	FEM analysis of wavelength effects in piezoelectric substrate. In: 2014 IEEE International Conference on Semiconductor Electronics (ICSE),
2014	Novel low-voltage RF-MEMS switch: design and simulation. In: IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE,
2014	Optimization of resonator design for vibration-based electromagnetic energy harvester. In: 4th International Conference on Noise, Vibration and Comfort, NVC 2012,
2014	Piezoelectric characteristics of CMOS compatible AIN SAW resonators. In: 2014 Asia-Pacific Microwave Conference (APMC 2014),
2014	Posture characterization based on time and frequency domains parameters for erector spine SEMG signal. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2013	0.35μm SPDT RF CMOS switch for wireless communication application. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013),
2013	Comparative analysis of zinc oxide and aluminium doped ZnO for GHz CMOS MEMS surface acoustic wave resonator. In: 2013 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2013),
2013	Design and analysis of a low-voltage electrostatic actuated RF CMOS-MEMS switch. In: 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2013	Design and simulation of 20MHz oscillator using CMOS-MEMS beam resonators. In: 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2013	Design and simulation of Clamped-Clamped and Clamped-Free resonators. In: 2013 5th Asia Symposium on Quality Electronic Design (ASQED),
2013	Design and simulation of two-stage CMOS amplifier for MEMS resonator. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013),
2013	Design of two-stage CMOS amplifier for quartz crystal resonator. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2013	Equivalent circuit modeling of two-port Al-doped Zinc Oxide CMOS SAW resonator using MATLAB™. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013),
2013	Finite element modeling of SAW resonator in CMOS technology for single and double interdigitated electrode (IDT) structure. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013),
2013	RF CMOS-MEMS cantilever resonator. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2013	The study of cell attachment and spreading on polyaniline and gelatin using electric cell-substrate impedance sensing. In: 3rd International Conference on Biotechnology Engineering (ICBIoE 2013,
2013	Water toxicity detection using cell-based hybrid biosensors. In: 2013 IEEE Sensors,
2012	Design of a pierce oscillator for CMOS SAW resonator. In: International Conference on Computer and Communication Engineering (ICCCE 2012),
2012	Theoretical design of CMOS SAW resonator. In: International Conference on Computer and Communication Engineering (ICCCE 2012),
2011	A low-cost first-order sigma-delta converter design and analysis. In: Instrumentation and Measurement Technology Conference (I2MTC), 2011 IEEE ,
2011	Design and modeling of MEMS SAW resonator on Lithium Niobate. In: 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011),
2011	Design and modelling of an impedance-based MEMS biosensor. In: Micro and Nanoelectronics (RSM), 2011 IEEE Regional Symposium on,
2011	Design and simulation of an on-chip oversampling converter with a CMOS-MEMS differential capacitive sensor. In: 2011 IEEE Symposium Design, Test and Packaging of MEMS and MOEMS,
2011	Design of a 5GHz phase-locked loop. In: Micro and Nanoelectronics (RSM), 2011 IEEE Regional Symposium on,
2011	Development of an RF-CMOS surface acoustic wave (SAW) resonator. In: Circuits and Systems (MWSCAS), 2011 IEEE 54th International Midwest Symposium on,
2011	Modeling of the reliability baseline for process control monitoring kerf structures. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2011	Novel MEMS fully differential capacitive transducer design and analysis. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011),
2011	Performance evaluation of MEMS piezoelectric inertial energy generator. In: 2011 IEEE Symposium Design, Test and Packaging of MEMS and MOEMS (DTIP 2011),
2011	Study of cells attachment using impedance spectroscopy technique . In: International Mechanical Engineering Congress & Exposition (IMECE 2011),
2011	Study of cells attachment using impedance spectroscopy technique. In: ASME International Mechanical Engineering Congress and Exposition (ASME 2011),
2010	Analysis of inductive powering harvesting circuit. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE),
2010	Characterization of endothelial cells using electrochemical impedance spectroscopy. In: Asia Pacific Conference on Circuits and Systems (APCCAS 2010),
2010	Characterization of endothelial cells using electrochemical impedance spectroscopy. In: 2010 IEEE Asia Pacific Conference on Circuit and System (APCCAS),
2010	Design and analysis of a first-order sigma-delta analog-to-digital converter for MEMS resistive sensor. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE),
2010	Design and fabrication of Surface Acoustic Wave resonators on Lithium Niobate. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010),
2010	Design and simulation of a lumped element metal finger capacitor for RF-CMOS power splitters. In: Circuits and Systems (APCCAS), 2010 IEEE Asia Pacific Conference on,
2010	Electrical cell-substrate impedance sensing (ECIS) based biosensor for characterization of DF-1 cells. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010	Finite modeling of SAW resonator for DF-1 cells. In: 2010 IEEE EMBS Conference on Biomedical Sciences (IECBS 2010),
2010	Measurements and modeling of temperature compensated surface acoustic wave resonators. In: 2010 Asia-Pacific Conference on Applied Electromagnetics (APACE 2010),
2010	MEMS energy harvester and condition monitoring sensor for power plants. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010	Methods of detection of hazardous materials using quartz crystal microbalance. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010	Simulation of a MEMS piezoelectric energy harvester. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010),
2010	Simulation of a surface transverse wave biosensor for DF-1 cells. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010	Simulation of a surface-transverse wave (STW) biosensor for DF-1 cells. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010	Simulation of MEMs piezoelectric energy harvester. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010),
2010	Simulations of surface and bulk acoustic wave MEMS biosensors. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP),
2010	Theoretical modeling and simulation of MEMS piezoelectric energy harvester. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2009	Design and simulation of RF-CMOS spiral inductors for ISM band RFID reader circuits. In: 2009 IEEE Workshop on Microelectronics and Electron Devices (WMED),
2009	Fabrication techniques and performance of piezoelectric energy harvesters. In: 2009 3rd International Conference on Energy and Environment ,
2009	MEMS biosensor for potential cancer cell detection. In: ASME International Mechanical Engineering Congress & Exposition (ASME 2009),
2009	The advent of industry fit RFID readers. In: 2008 International Conference on Advanced Computer Theory and Engineering ICACTE 2008,
2008	A high linearity CMOS RF amplifier for power control module in RFID reader. In: 3rd International Conference on Mechatronics, ICOM’08,
2008	On-chip hotplate for temperature control of CMOS SAW resonators. In: Design, Test, Integration and Packaging of MEMS/MOEMS, 2008,
2006	Design and implementation of a 1GHz CMOS resonator utilizing surface acoustic wave. In: International Symposium on Circuits and Systems (ISCAS 2006),
2005	CMOS surface acoustic wave oscillators. In: Circuits and Systems, 2005. 48th Midwest Symposium on,
2002	CMOS design and implementation of sigma-delta analog-to-digital data converter suitable for MEMS devices. In: 45th IEEE International Midwest Symposium on Circuits and System,

Book

2018	Fundamentals of microelectronic circuits, 2nd Edition. Pearson Malaysia, ISBN: 978-967-349-755-3
2012	Fundamentals of microelectronic circuits. Pearson Malaysia Sdn Bhd, ISBN: 978-967-349-202-2
2011	Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, ISBN: 9789674181710

Book Section

2019	Recognition of bacterial DNA on SAW-based biosensors. In: Elsevier, ISBN: 978-0-12-813900-4, pp. 117-140
2014	Technical and economic feasibility of sensor technology for health/environmental condition monitoring. In: Elsevier, ISBN: 9780080965321, pp. 499-514
2012	Acoustic wave based MEMS devices, development and application. In: InTech, ISBN: 9789535103066, pp.
2012	RF-MEMS based oscillators. In: IGI-Global, ISBN: 9781466600836, pp. 120-155
2012	RF-MEMS based oscillators. In: IGI-Global, ISBN: 9781466600836, pp. 120-155
2011	A high linearity CMOS RF amplifier for power control module in RFID reader . In: IIUM Press, ISBN: 9789670225685, pp. 203-208
2011	Circuit design of a clock data recovery. In: IIUM Press, ISBN: 9789674181536, pp. 365-375
2011	CMOS operational amplifier design. In: IIUM Press, ISBN: 9789674181710, pp. 60-67
2011	Comparative analysis of low power VLSI circuit techniques. In: IIUM Press, ISBN: 9789670225814, pp. 219-234
2011	Converters results verifications. In: IIUM Press, ISBN: 9789674181710, pp. 73-76
2011	Data conversion basic concepts. In: IIUM Press, ISBN: 9789674181710, pp. 36-40
2011	Design of MEMS cantilever energy harvester. In: IIUM Press, ISBN: 9789674181536, pp. 57-66
2011	Digital-to-analog converter. In: IIUM Press, ISBN: 9789674181710, pp. 68-72
2011	MEMS surface acoustic waves oscillator. In: IIUM Press, ISBN: 9789674181536, pp. 23-36
2011	Nyquist-rate analog-to-digital converter. In: IIUM Press, ISBN: 9789674181710, pp. 41-46
2011	Oversampling analog-to-digital converter. In: IIUM Press, ISBN: 9789674181710, pp. 47-52
2011	Sensor and sensor response-issues and interfacing . In: IIUM Press, ISBN: 978-967-418-172-7, pp. 119-131
2011	Switched-capacitor integrator design. In: IIUM Press, ISBN: 9789674181710, pp. 53-59

Monograph

2020	Investigation of electropolymerized carbon-based nanomaterials as electrodes in energy storage devices for improved microbial fuel cell. In: ,