Staff Directory


Maizirwan Mel

Academic Qualification

  • Doctor of Philosophy in Bioprocess Engineering - Doctor of Philosophy, Universiti Teknologi Malaysia (UTM)
  • Master of Science (Bioprocess Technology) - Masters Degree, Universiti Putra Malaysia (UPM)
  • Diploma - Post Graduate Diploma, International Islamic University Malaysia
  • Bachelor of Post Harvest Process Technology - Bachelor Degree, Universitas Riau

Maizirwan Mel (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


maizirwan@iium.edu.my
4566


Expert Profile


Maizirwan Mel is an Associate Professor at the Department of Biotechnology Engineering, Faculty of Engineering, IIUM. He obtained his Ph.D in Bioprocess Engineering from UTM Johor in 2002. His research interests are in the areas of Optimization, Simulation and Modeling of Bioprocess, Fermentation Kinetics and Design, Biologics Separation and Purification, and Biomanufacturing, Bioenergy Technology and Engineering.
He has over 18 years experience in teaching Biotechnology Engineering Laboratory IV, Bioprocess Facility Design and Regulatory, Biopharmaceutical Manufacturing, Cell Culture Engineering and Biomass Energy, Design and Optimization Process Biotechnology, Biochemical Engineering Fundamental, Process Plant Design & Analysis. Dr Maizirwan also serves as a Associate Editor Member for journal of Frontiers in Bioengineering and Biotechnology (Section of Bioprocess Engineering), Chief Editor for Journal of Advanced Research in Biofuel and Bioenergy, Editorial member for Journal of Advanced Research in Fluid Mechanic and Thermal Sciences. He is also the editorial board of IIUM Naturals Sciences and Biological Engineering Journal. He has published over 137 papers in national and International conferences, 114 papers in SCOPUSĀ  and WoS indexed journals, 17 patents filed, six patents granted (two in USA and four in Malaysia), two licensed technologies for industries. He is a member of the Institution Engineers of Indonesia, IEI (1991-Present) and MBOT Malaysia since July 2018. He was the Head of Department for Biotechnology Engineering (2003-2004), Biotechnology Engineering Academic Adviser (2004-2005), Coordinator for Engineering Industrial Training Unit of IIUM (2008-2011), and also former Deputy Dean of Innovation and Commercialization of the Research Management Centre of IIUM (August 2011-September 2013).


Area of Specialisation


  • Engineering Tech ~ Applied Sciences And Technologies ~ Process Technology ~ Bioprocess Engineering - Bioprocess Engineering,Fermentation Technology Biopharmaceutical Manufacturing, Bioenergy


Professional Membership


  • 1991 - 2013: Member of Profesional Body / Association, The Institution of Engineers Indonesia (PII)


Teaching Responsibilities


ADVANCED BIOLOGICAL REACTOR DESIGN AND ANALYSIS 2016/2017
ADVANCED BIOSEPERATION PROCESSES 2019/2020
ANIMAL CELL CULTURE ENGINEERING 2013/2014 2011/2012 2014/2015 2008/2009 2012/2013 2010/2011 2009/2010
BIO-PHARMACEUTICAL MANUFACTURING 2006/2007 2007/2008 2011/2012 2014/2015 2003/2004 2017/2018 2005/2006 2010/2011 2012/2013 2009/2010 2004/2005
BIOCHEMICAL ENGINEERING FUNDAMENTALS 2017/2018 2020/2021 2016/2017 2018/2019 2013/2014 2021/2022
BIOMASS ENERGY 2016/2017 2018/2019 2010/2011 2015/2016 2011/2012 2019/2020 2014/2015 2017/2018
BIOPHYSICAL CHEMISTRY 2002/2003
BIOPROCESS FACILITY DESIGN AND REGULATORY 2012/2013 2014/2015 2017/2018 2010/2011 2013/2014 2009/2010 2011/2012 2015/2016 2019/2020 2018/2019 2020/2021 2008/2009
BIOPROCESS I 2003/2004
BIOTECHNOLOGY ENGINEERING LAB IV 2020/2021 2010/2011 2009/2010 2019/2020 2018/2019 2017/2018 2021/2022 2008/2009 2011/2012
BIOTECHNOLOGY FACILITY DESIGN AND REGULATORY 2009/2010 2008/2009 2005/2006 2007/2008 2003/2004 2004/2005 2006/2007
BIOTECNOLOGY ENGINEERING LABORATORY 2006/2007 2008/2009 2004/2005 2005/2006 2009/2010 2003/2004 2007/2008
DESIGN AND OPTIMIZATION OF PROCESS BIOTECH. 2012/2013
ENGIN. ASPECT OF ANIMAL & PLANT CELL CULTURE 2008/2009
ENGINEERING ETHICS FROM ISLAMIC PERSPECTIVE 2020/2021
ENGINEERING INDUSTRIAL TRAINING 2009/2010 2010/2011
FINAL YEAR PROJECT II 2018/2019
Integrated Design Project 2018/2019
INTRODUCTION TO CELL AND TISSUE ENGINEERING 2004/2005 2005/2006 2006/2007 2003/2004
INTRODUCTORY MICROBIOLOGY 2003/2004 2002/2003
ISLAMIZATION OF ENGINEERING STUDIES 2020/2021
PROCESS PLANT DESIGN & SAFETY 2013/2014
PROJECT I 2018/2019
SEMINAR 2018/2019
SEPARATION PROCESSES II 2019/2020 2020/2021 2017/2018


Research Projects


Completed
2018 - 2020 Internet of Things Based Water Quality Monitoring System for Aquaponics
2016 - 2020 Lysozyme Loaded Core Shell CuZnO Nanospheres as Superior Antimicrobial Agent
2015 - 2017 Upgrading Biomethaneas Low Carbon Fuel for Motorbike
2015 - 2018 Development of Ceramic Membranes from Halal Sources Material for Removal of CO2 from Biogas Plant
2015 - 2019 Straightforward Synthesis of Injectable Calcium Phosphate Cement Through Novel Hydrothermal Technique for Bone Filling Materials
2014 - 2016 Implementation of Lean Manufacturing Blend with Good Manufacturing Practice for Minda Tulus Sdn Bhd to Improve Their Performance
2012 - 2015 Proof of Concept for a Novel Real Time, Hardware base Cancer Chemotherapeutics Kit Using MEMS Biosensor
2012 - 2014 Pilot Scale Production of Biogas from Co-Digestion of Cow Manure and Food Waste for Electricity Generation
2012 - 2015 Exploring the Potential of during Skin Waste as a Filler in Biodegradable Polymer
2012 - 2015 Using Metabolic Flux Balance Analysis ( FBA ) for the Production of Biohydrogen from Renewable Organic Waste
2012 - 2013 Study the Effect of Kenaf Biomass' Morphology and its Chemicals Constituents on the Pre-Treatment Process and Production of L(+) Lactic Acid.
2012 - 2015 Hardware Implementation of a Novel Impedance Spectroscopy System for Cancer Cell Studies
2011 - 2015 Upscaling of Gelatin Coated Microcarrier Beads Fabrication by Using Ultraviolet/Ozone (UVO) system
2011 - 2013 Bioactive Ceramic Matrix Nanocomposites for High Performance Load Bearing Bone Substitute
2011 - 2014 Production Of High Grade Ethanol From Sago
2011 - 2012 Extraction of Astaxanthin Esthers from Shrimp Waste by Fermentation
2011 - 2014 Enhancement of Co2 Mitigation of Cyanobacteria Potential for Biofuel Production
2011 - 2012 Hydrolysis of Glucose in Kenaf Biomass
2011 - 2012 Bioprocessing Of Recombinant E.Coli Producing Glucuronidase Enzymes
2010 - 2011 Development of Glycerol-Containing Media and Process Conditions for Production of Nucleocapsid Protein of New Castle Disease Virus
2010 - 2011 Engine Performance Analysis for Enhanced Fuel
2010 - 2013 The Production of Liquid Spawn (Seed) and Fruiting Bodies of Schizophyllum Commune
2009 - 2010 Development of Porous Alumina for Biomedical Application using Protein Foaming-Consolidation Method
2009 - 2012 Global Metabolite Analysis of CHO Cells Cultured in T-Flasks and Bioreactor using Gas Chromatography-Mass Spectrometry
2009 - 2012 Studies on Effect(s ) of Glutamine and/or Serum on CHO Cell Growth in Bioreactor Culture Focusing on the Insulin-like Growth Factor (IGF) Pathway
2009 - 2011 Development of Gelatin Coated Polyethylenea and Polystrene Microcarrier for Vero Cell Culture
2008 - 2010 Design and Development of Novel MEMS bio-sensor for real-time study of Bone Deformation
2007 - 2010 Improvement of Nucleocapsid Protein of Avian Infuenza Virus (NP-AIV) Production from Recombinant E. coli Using 2L Benchtop Fermenter
2007 - 2011 Kinetic Studies and Optimisation of Biofuel Production from Cassava-Starch via Yeast Fermentation.
2006 - 2011 Process Improvement of Newcastle Disease Virus (NDV) Vaccine Production In Bioreactor
2006 - 2009 Development Of Bioactive Porous Ceramic Microcarriers For Animal Cell Proliferation
2005 - 2010 Thermophilic B-Glucuronidase Production by Recombinant Eschericia Coli: Growth Kinetics Study and Modelling in Laboratory Scale Fermenter
2005 - 2008 Optimization and Growth Kinetic Study of Laboratory Scale Fermentor for the Production of Lactic Acid
2005 - 2009 Purification of Monoclonol Antibody (Mouse IgG): Designing Optimization of Yield Using Chromatographic Techniques
2005 - 2009 Insulin Production: Development of Bioreactor System for High Cell Density Culture of Pancreas Cell (RIN-5F)
On-Going
2020 - Present Design and Development of New Food Holder for Food Packaging Using 3D Printing Technology
2020 - Present Local production of green chemicals from special strain of non-edible cassava starch in high scale of cost effective process
2019 - Present Indigenous and Traditional Medical Knowledge of Orang Asli for Community Sustainable Development
2019 - Present Green synthesis of iron oxide nanoparticles for biohydrogen production via thermophilic anaerobic fermentation
2018 - Present TRANSFERRING KNOWLEDGE TO AGROPRENUERS FOR MONITORING WATER QUALITY IN AN AQUAPONICS SYSTEM USING INTERNET OF THINGS (IOT)
2018 - Present SYNGAS PRODUCTION USING EFB PELLET AS FEEDSTOCK
2006 - Present Bio-Process and Molecular Engineering Research Unit (BPMERU)


Award & Recognition


29 Nov, 2012 Gold Medal Award - Seoul International Invention Fair (SIIF) International
07 Nov, 2012 Bronze Medal Award - Bio Innovation Award International
28 Jun, 2012 Outstanding Research Award - IIUM Quality Day 2012 University
17 May, 2012 Silver Medal Award - International Invention Innovation and Technology Exhibition (ITEX) 2012 International
21 Feb, 2012 Gold Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2012 University
21 Feb, 2012 1st Prize Commercial Potential Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2012 University
21 Feb, 2012 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2012 University
21 Nov, 2011 Silver Medal Award - Bio Innovation Award International
21 Nov, 2011 Gold Medal Award - Bio Innovation Award International
19 Oct, 2011 Best Poster Presentation Award - Malaysia Polymer International Conference (MPIC) National
14 Oct, 2011 Gold Medal Award - Ekspo Inovasi Islam 2011 National
17 Mar, 2011 Outstanding Research Award - IIUM Quality Day 2011 University
09 Feb, 2011 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2011 University
09 Feb, 2011 Gold Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2011 University
09 Feb, 2011 Consolation prize Potential Commercial Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2011 University
09 Feb, 2011 Silver Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2011 University
09 Feb, 2011 Gold Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2011 University
09 Feb, 2011 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2011 University
26 Nov, 2010 Best Poster Award - International Conference on Advancement in Science and Technology (ICAST) 2010 University
01 Nov, 2010 Bronze Medal Award - Bio Innovation Award 2010 National
01 Nov, 2010 Silver Medal Award - Bio Innovation Award 2010 National
12 Oct, 2010 Gold Medal - International Invention Innovation and Technology Exhibition (ITEX) 2010 International
26 Sep, 2010 Silver Medal Award - Ekspo Inovasi Islam 2010 National
26 Sep, 2010 Bronze Medal Award - Ekspo Inovasi Islam 2010 National
26 Sep, 2010 Silver Medal Award - Ekspo Inovasi Islam 2010 National
04 Feb, 2010 Bronze Medal Award - Malaysia Technology Expo (MTE) 2010 National
04 Feb, 2010 Bronze Medal Award - Malaysia Technology Expo (MTE) 2010 National
26 Jan, 2010 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 Silver Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 1st Prize for Innovation and Commercialization Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 Silver Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
26 Jan, 2010 Bronze Medal Award - IIUM Research Invention and Innovation Exhibition (IRIIE) 2010 University
17 Nov, 2009 Bronze Medal Award - Bio Innovation Award 2009 National
17 Nov, 2009 Bronze Medal Award - Bio Innovation Award 2009 National
26 Sep, 2009 Bronze Medal Award - Taipei Invention Show 2009 International
19 Feb, 2009 Silver Medal Award - Malaysia Technology Expo (MTE) 2009 National
19 Feb, 2009 Silver Medal Award - Malaysia Technology Expo (MTE) 2009 National
19 Feb, 2009 Bronze Medal Award - Malaysia Technology Expo (MTE) 2009 National
19 Feb, 2009 Bronze Medal Award - Malaysia Technology Expo (MTE) 2009 National
21 Jan, 2009 Silver Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2009 University
21 Jan, 2009 Silver Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2009 University
21 Jan, 2009 Bronze Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2009 University
30 Oct, 2008 Gold Medal Award - Ideen Erfindungen Neuheiten (IENA) 2008 International
22 Jul, 2008 Best Poster Award - 2nd Malaysian Tissue Engineering and Regenerative Medicine Scientific Meeting (MTERM 08) National
11 Jun, 2008 Bronze Medal Award - Invention and New Product Exposition (INPEX) 2008 International
09 May, 2008 Gold Medal Award - International Invention Innovation and Technology Exhibition (ITEX) 2008 International
09 May, 2008 Silver Medal Award - International Invention Innovation and Technology Exhibition (ITEX) 2008 International
21 Mar, 2008 Silver Medal Award - Malaysia Technology Expo (MTE) 2008 National
21 Mar, 2008 Bronze Medal Award - Malaysia Technology Expo (MTE) 2008 National
12 Dec, 2007 Gold Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2007 University
12 Dec, 2007 Silver Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2007 University
22 Nov, 2007 Gold Medal Award - International Exhibition of Brussels Innova Energy 2007 International
22 Nov, 2007 Silver Medal Award - International Exhibition of Brussels Innova Energy 2007 International
28 Mar, 2007 Gold Medal Award - Malaysia Technology Expo (MTE) 2007 National
19 Feb, 2007 University Promising Research Award - International Islamic University Malaysia (IIUM) University
07 Dec, 2006 Gold Medal Award - Seoul International Invention Fair (SIIF) International
07 Dec, 2006 Silver Medal Award - Seoul International Invention Fair (SIIF) International
05 Dec, 2006 Gold Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2006 University
05 Dec, 2006 Silver Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2006 University
05 Dec, 2006 Bronze Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2006 University
05 Dec, 2006 Silver Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2006 University
11 Nov, 2006 Special Award Recognition from State Office of Industrial Property of Macedonia - Ideen Erfindungen Neuheiten (IENA) 2006 International
11 Nov, 2006 Gold Medal Award - Ideen Erfindungen Neuheiten (IENA) 2006 International
19 May, 2006 Gold Medal Award - International Invention Innovation and Technology Exhibition (ITEX) 2006 International
19 May, 2006 Bronze Medal Award - International Invention Innovation and Technology Exhibition (ITEX) 2006 International
07 Apr, 2006 Silver Medal Award - Geneva Exhibition International
23 Feb, 2006 Gold Medal Award - Malaysia Technology Expo (MTE) 2006 National
23 Feb, 2006 Silver Medal Award - Malaysia Technology Expo (MTE) 2006 National
20 Dec, 2005 Silver Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2005 University
20 Dec, 2005 Bronze Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2005 University
20 Dec, 2005 Bronze Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2005 University
20 Dec, 2005 Gold Medal Award - Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2005 University


Publications


Article

2021 Enzymatic hydrolysis enhancement of oil palm empty fruit bunch by Peracetic-Sulfuric acid pretreatment. Chemical Engineering Journal, 429 () pp. 1-9
2021 Gene expression related to Steviol glycoside synthesis produced in Stevia rebaudiana (bert.) Shoot culture induced with high far-red LED light in TIS RITA® bioreactor system. Sarhad Journal of Agriculture, 37 (1) pp. 1-8
2021 Optimization of ultraviolet/ozone (uvo3) process conditions for the preparation of gelatin coated polystyrene (ps) microcarriers. Preparative Biochemistry & Biotechnology, () pp. 1-16
2021 Pyrolysis of water hyacinth [eichhornia crassipes (mart.) Solms] for liquid smoke production. E3S Web of Conferences, 226 (00038) pp.
2020 Bioethanol used as topical antiseptics: pretreatment optimization of bioethanol production from tobacco industrial waste. Annals of Tropical Medicine and Public Health, 23 (8) pp. 1213-1219
2020 Coronary artery disease in periodontitis rat model. Annals of Tropical Medicine and Public Health, 23 (3) pp. 44-52
2020 Enhancement of M15 engine performance by the addition of propylene glycol. International Journal of Emerging Trends in Engineering Research ( IJETER ), 8 (6) pp. 2594-2599
2020 Experimental studies on combustion characteristics of oil-palm biomass in fluidized-bed: a heat energy alternative. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2) pp. 9-28
2020 Investigation of biomass combustion and conceptual design of a fluidized-bed. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (1) pp. 81-97
2020 Periodic UV-C light treatment for reducing the formation of free fatty acids in crude palm oil during storage. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 73 (73) pp. 25-34
2020 Preliminary study of novel coal spills-based physical activated carbon for copper ions adsorption in aqueous solution: kinetics and isotherms. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (1) pp. 28-38
2020 Techno-economic analysis of bio-briquette from cashew nut shell waste. Heliyon, 6 (9) pp.
2020 Utilization of oil palm biomass as a renewable and sustainable energy source in Aceh province. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2) pp. 97-108
2020 Water quality monitoring system for aquaponics and fishpond using Wireless Sensor Network. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (3) pp. 51-54
2019 Calcium phosphate /poly (ethylene glycol) bone cement: cell culture performance. International Journal of Recent Technology and Engineering, 7 (6) pp. 82-86
2019 Comparative study of the performance and economic value of a small engine fueled with B20 and B20-LPG as an effort to reduce the operating cost of diesel engines in remote areas. IOP Conference Series: Materials Science and Engineering, 598 (1) pp. 1-9
2019 Effectiveness of the use of organic waste as fertilizer and physical scarification of seeds on growth of seeds nila plants (Indigofera sp.). IOP Conference Series: Earth and Environmental Science, 293 () pp. 1-7
2019 Fermentation quality of Pennisetum purpureum cv. Mott ensiled with Lactobacillus plantarum and sugarcane molasses in tropic. IOP Conf. Series: Earth and Environmental Science, 293 (012007) pp. 1-7
2019 Heat-treated CNC/PVA composite from natural fibre for wax removal of batik wastewater treatment. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2) pp. 354-362
2019 Portable water quality monitoring system for aquaponics using We MOS. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (1) pp. 4181-4184
2019 Prospect of Fe non-heme on coffee flour made from solid coffee waste: Mini review. IOP Conference Series: Earth and Environmental Science, 293 () pp. 1-25
2019 The effect of steeping robusta coffee beans on monocytes: Expression of IL-1β and TNF-α against Streptococcus mutans. Coffee Science, 14 (4) pp. 477-483
2019 The potential of an extract of Zingiber zerumbet (L.) Smith as a feed additive to improve the production performances and meat nutritional composition of broiler chickens. IOP Conference Series: Earth and Environmental Science, 293 () pp. 1-7
2018 Design of liquefaction process of biogas using Aspen HYSYS simulation. Journal of Advanced Research in Biofuel and Bioenergy, 2 (1) pp. 10-15
2018 Development of mini pilot fluidized bed gasifier for industrial approach: Preliminary study based on continuous operation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1) pp. 35-43
2018 Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, Special issue () pp. 63-67
2018 Effect of holes system designing for low energy stove using coffee husk bio-pellet as solid fuel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51 (2) pp. 215-216
2018 Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement. IIUM Engineering Journal, 19 (2) pp. 192-202
2018 Effect of Rushton impeller speed on biogas production in anaerobic digestion of continuous stirred bioreactor. Journal of Advanced Research in Biofuel and Bioenergy, 3 (1) pp. 9-18
2018 Improvement of biogas upgrading process using chemical absorption at ambient conditions. Jurnal Teknologi, 80 (1) pp. 107-113
2018 Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1) pp. 378-383
2018 Investigation of bioflocculant as dewatering aid in sludge treatment. IIUM Engineering Journal, 19 (1) pp. 15-23
2018 Preliminary study on designing and development of a synthesis gas analyser in the process of gasification. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1) pp. 76-84
2018 Preliminary study on designing and development of biogas analyser and monitoring system using IoT. Journal of Advanced Research in Biofuel and Bioenergy, 3 (1) pp. 1-8
2018 Process optimization of biogas production from palm oil mill effluent: a case study of a crude palm oil factory in Muaro Jambi, Indonesia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (2) pp. 155-169
2018 Screening of lutein content in several fresh-water microalgae. International Food Research Journal, 25 (6) pp. 2307-2312
2018 The effect of single and double air inlets on swirling flow in a reactor of a fluidized bed gasifier. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1) pp. 157-166
2018 Transformation of carbon dioxide into methanol. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1) pp. 55-62
2018 Upgrading biogas by membrane contactor separation. Journal of Advanced Research in Biofuel and Bioenergy, 3 (1) pp. 19-26
2017 Ballast weight review of capsule husk Jatropha curcas Linn. on acid fermentation first stage in two phase anaerobic digestion. Proceedings of the Pakistan Academy of Sciences, 54 (1B) pp. 47-57
2017 Calcium phosphate cement for bone filler applications. Journal of Advanced Research in Materials Science, 39 (1) pp. 20-31
2017 Combining ability in Jatropha curcas L. Genotypes. Proceedings Of The Pakistan Academy Of Sciences (B), 54 (3) pp. 259-261
2017 Different oxidation treatments on polystyerene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of the Pakistan Academy of Sciences: B. Life and Ennvironmental Sciences, 54 (1B) pp. 55-59
2017 Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of Pakistan Academy of Sciences: B. Life and Environmental Sciences, 54 (B) (1) pp. 59-64
2017 Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3)system. Proceedings of Pakistan Academy of Sciences, 54 (1B) pp. 59-65
2017 Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (Issue 1) pp. 19-24
2017 Effects of co-digestion of camel dung and municipal solid wastes on quality of biogas, methane and biofertilizer production. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1) pp. 7-17
2017 Influence of operating variables on the in-situ transesterification using CaO/Al2(SO4)3 derived from waste. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1) pp. 1-6
2017 Influence of volatile fatty acid concentration on biogas production in synthropic anaerobic digestion. Journal of Advanced Research in Biofuel and Bioenergy, 1 (1) pp. 26-43
2017 Optimization of ultraviolet ozone treatment process for improvement of polycaprolactone (PCL) microcarrier performance. Cytotechnology, 69 (4) pp. 601-616
2017 Preliminary studies of biorefinery: Integration of slurry and CO2 gas as biomethane digester waste for microalgae Scenedesmus sp. growth. Journal of Advanced Research in Biofuel and Bioenergy, 1 (1) pp. 13-19
2017 Production of coconut shell liquid smoke from pilot plant of pyrolysis process. Journal of Advanced Research in Biofuel and Bioenergy, 1 (1) pp. 20-25
2017 Statistical optimization of gelatin immobilisation on modified surface of PCL microcarrier to improve its compatibility. Jurnal Teknologi, 79 (6) pp. 167-175
2017 Statistical optimization of gelatin immobilisation on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi, 79 (6) pp. 167-175
2017 Statistical optimization of gelatin immobilization on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi, 79 (6) pp. 167-175
2017 Synthesis and characterization of silica ceramic membranes via sol-dip coating. Journal of Advanced Research in Materials Science, 39 (1) pp. 1-7
2016 A review of chemical absorption of carbon dioxide for biogas upgrading. Chinese Journal of Chemical Engineering, 24 (6) pp. 693-702
2016 Carbon dioxide capture efficiency using algae biological absorbent and solid adsorbent for biogas purification. Jurnal Teknologi (Sciences and Engineering), 78 (4-2) pp. 175-178
2016 Fabrication and sintering behavior of zinc-doped biphasic calcium phosphate bioceramics. Materials and Manufacturing Processes, 31 (6) pp. 713-718
2016 Profiling of extracellular metabolites in CHO-K1 cells cultured in medium with different levels of serum and glutamine. Current Metabolomics, 4 (1) pp. 56-62
2015 Chaterization of Jatropha curcas Linn. Capsule Husk as feedstock for anaerobic digestion. Energy Procedia, 65 () pp. 264-273
2015 Effect of organic loading rate (OLR) of slurry on biogas production quality. Advanced Materials Research, 1115 () pp. 325-330
2015 Preliminary study on biohydrogen production by E. coli from sago waste. Journal of Engineering Science and Technology , 10 (2) pp. 11-21
2015 Preparation of durian skin nanofibre (DSNF) and its effect on the properties of polylactic acid (PLA) biocomposites = Penyediaan nano-serabut kulit durian (DSNF) dan kesannya ke atas sifat biokomposit asid polilaktik (PLA). Sains Malaysiana, 44 (11) pp. 1551-1559
2015 Process improvement of biogas production from anaerobic co-digestion of cow dung and corn husk. Procedia Chemistry, 14 () pp. 91-100
2015 Simulation study for economic analysis of biogas production from agricultural biomass. Energy Procedia, 65 () pp. 204-214
2015 The performance of Jatropha curcas Linn. Capsule Husk as feedstocks biogas in one phase anaerobic digestion. Procedia Chemistry, 14 () pp. 316-325
2015 The study of slurry recirculation to increase biogas productivity from Jatropha curcas Linn. capsule husk in two phase digestion. Energy Procedia, 65 () pp. 300-308
2015 Ultraviolet/ozone treated polystyrene microcarriers for animal cell culture. Journal of Chemical Technology and Biotechnology, () pp.
2014 Comparison of two total RNA extraction protocols from CHO-K1 cells for RT-PCR: cutoff cost for researchers. IIUM Engineering Journal, 15 (1) pp. 33-39
2014 Effects of glutamine and serum on IGF- dependent cho-K1 cell growth in T-Flask. Advances in Environmental Biology, 8 (3 ( Special Issue )) pp. 831-837
2014 Investigations of the effects of initial Zn concentration and sintering conditions on the phase behavior and mechanical properties of Zn-doped bcp. Advances in Environmental Biology, 8 (3(Spe)) pp. 680-685
2014 Optimization of spray drying process conditions for recombinant stem bromelain. Advances in Environmental Biology, 8 (3) pp. 696-703
2014 Preparation of zinc doped-biphasic calcium phosphate/carbon nanotube composites. Advances in Environmental Biology, 8 (3(Spe)) pp. 787-791
2014 Study of chemical and thermal properties of kenaf biomass-based polylactic acid (PLA). Advances in Environmental Biology, 8 (3 Spec. Issue) pp. 633-638
2013 Kinetic studies on recombinant stem bromelain. Advances in Enzyme Research, 1 (3) pp. 52-60
2013 Metabolomics profiling of extracellular metabolites in CHO-K1 cells cultured in different types of growth media. Cytotechnology, 65 (4) pp. 577-586
2012 A rapid method for large sample number extraction of proteins from mammalian cells. Regenerative Research, 1 (2) pp. 49-55
2012 Batch process modelling and economic evaluation of glucuronidase enzyme production. Bioprocessing and Biotechniques, (S4) pp. 1-7
2012 Bromelain production: Current trends and perspective. Archives Des Sciences, 65 (11) pp. 369-399
2012 Characterization on surface modification of kenaf biomass via microbial fermentation. Advanced Materials Research, 576 () pp. 268-271
2012 Effect of hydroxyapatite and tricalcium phosphate addition on protein foaming-consolidation porous alumina. Journal of Porous Materials, 19 (5) pp. 733-743
2012 Evaluation of maximum percentage glucose conversion for dilute acid hydrolysis of kenaf biomass using statistical analysis. Advanced Materials Research, 576 () pp. 244-247
2012 Porous alumina–hydroxyapatite composites through protein foaming–consolidation method. Journal of the Mechanical Behavior of Biomedical Materials, 8 () pp. 86-98
2012 Process modelling and debottlenecking study of a vaccine production. IIUM Engineering Journal, 13 (1) pp. 97-107
2012 Production of lactic acid from kenaf core hydrolysate by rhizopus oryzae FTCC 5215. Advanced Materials Research, 576 () pp. 248-251
2012 Recombinant bromelain production in Escherichia coli: process optimization in shake flask culture by response surface methodology. AMB Express, 2 (12) pp. 1-9
2012 Serum in mammalian cell culture: weighing the challenges of bioprocessing, ethics and animal welfare. Advances in Natural and Applied Sciences, 6 (5) pp. 596-600
2012 The importance of a standardized Islamic manufacturing practice (IMP) for food and pharmaceutical productions. The Importance of a Standardized Islamic Manufacturing Practice (IMP) for Food and Pharmaceutical Productions, 6 (5 Special 4) pp. 588-595
2011 Chinese hamster ovary (CHO-K1) cells expressed native insulin-like growth factor-1 (IGF-1) gene towards efficient mammalian cell culture host system . African Journal of Biotechnology, 10 (81) pp. 18716-18721
2011 Determination of IGF-1-producing CHO-K1 growth phases using GCMS-based global metabolite analysis. IIUM Engineering Journal, 12 (4) pp. 89-98
2011 Effect of hydroxyapatite and tricalcium phosphate addition on protein foaming-consolidation porous alumina. Journal of Porous Materials, () pp.
2011 Effect of Rhizopus Oryzae Fermentation on Kenaf-based Polylactic Acid’s Monomer. IIUM Engineering Journal, 12 (4) pp. 83-87
2011 Efficient performance of locally processed serum in vero cell culture. Journal of Materials Science and Engineering, 5 (4) pp. 439-446
2011 Extraction of Algae Oil from Nannocloropsis sp.: A study of Soxhlet and Ultrasonic-Assisted Extractions. Journal of Applied Sciences, () pp.
2011 Fabrication of ceramic membrane chromatography for biologics purification. IIUM Engineering Journal, 12 (4) pp. 115-124
2011 Micro-sized particle production of Momordica Sp extract using spray dryer. IIUM Engineering Journal, 12 (4) pp. 73-82
2011 Optimization of Newcastle disease virus production in T-flask. African Journal of Biotechnology, 10 (81) pp. 18816-18823
2011 Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical properties. Asia-Pacific Journal of Chemical Engineering, 6 () pp. 863-869
2011 Prediction of significant factors in the production of ethanol by ragi tapai co-culture using Taguchi methodology. African Journal of Biotechnology, 10 (81) pp. 18833-18841
2011 Purification of nucleocapsid protein of Newcastle Disease virus for immunodiagnostic kit. IIUM Engineering Journal, 12 (2) pp.
2011 Recovery of recombinant bromelain from Escherichia coli BL21-AI. African Journal of Biotechnology, 10 (81) pp. 18829-18832
2011 Simple process capability analysis and quality validation of monoclonal antibody production in bench-top bioreactor. African Journal of Biotechnology, 10 (81) pp. 18824-18828
2011 Study of growth kinetic and modeling of ethanol production by Saccharomyces cerevisae. African Journal of Biotechnology, 16 (81) pp. 18842-18846
2011 Surface modification of polystyrene beads by UV/Ozone treatment. Advanced Materials Research, 264 () pp. 1532-1537
2011 Synthesis of Ti02 N anosized Powder Photocatalyst Via Solgel Method for Bacteria Inactivation Application. Malaysian Journal of Microscopy, 7 () pp. 161-169
2011 Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application. Malaysian Journal of Microscopy, 7 () pp. 161-169
2010 Cell rupture of recombinant escherichia coli using high pressure homogenizer. Journal of Applied Sciences, 10 (21) pp. 2717-2720
2010 Comparing BRIN-BD11 culture producing insulin using different type of microcarriers. Cytotechnology, 62 () pp. 423-430
2010 Optimisation of hydrolysis conditions for ethanol production from sorghum starch. Journal - The Institution of Engineers, Malaysia, 71 (3) pp. 26-34
2010 Optimization of process conditions for high cell density proliferation of DF-1 cells in bioreactor. Medical Journal of Malaysia, 65 () pp. 19-21
2010 Optimization of process conditions for high cell density proliferation of DF-1 cells in bioreactor. Medical Journal of Malaysia, 65 () pp. 19-21
2010 Optimization of sonication process for high newcastle disease virus (NDV)titer. Journal of Chemistry and Chemical Engineering, 4 (4 ) pp. 49-54
2010 Production of newcastle disease virus by vero cells grown on cytodex 1 microcarriers in a 2-litre stirred tank bioreactor. Journal of Biomedicine and Biotechnology, 2010 (586363) pp. 1-7
2010 Ragi tapai and saccharomyces cerevisiae as potential coculture in viscous fermentation medium for ethanol production. African Journal of Biotechnology, 9 (42) pp. 7122-7127
2010 Study of immobilized bovine and fish gelatin on carboxyl containing Polystyrene beads for Vero cell culture . Medical Journal of Malaysia, 65 () pp. 26-27
2010 Surface modification of polystyrene beads by ultraviolet/ozone treatment and its effect on gelatin coating. American Journal of Applied Sciences, 7 (6) pp. 724-731
2010 The evaluation of kLa values for recombinant Escherichia coli fermentation producing β-Glucuronidase enzyme . Journal of Applied Sciences, 10 (4) pp. 325-330
2010 The growth study of vero cells in different type of microcarrier. Materials Sciences and Applications, 1 (5) pp. 261-266
2009 Comparison of sweet sorghum and cassava for ethanol production by using saccharomyces cerevisiae. Journal of Applied Sciences, 9 (17) pp. 3068-3073
2009 Halal issues in pharmaceutical products: urgent need to have modern and efficient production of pharmaceuticals and biopharmaceuticals. Halal Pages 2009/2010, () pp. 56-63
2009 Process improvement of pharmaceutical grade ethanol production using sweet sorghum. International Journal of Science Engineering and Technology, 2 (1) pp. 57-63
2009 Single-step bioconversion of starch to bioethanol by the coculture of ragi tapai and saccharomyces cerevisiae. Chemical Engineering Transactions, 18 () pp. 557-562
2008 Cell attachment study of chicken fibroblast cell(DF-1) using ceramic microcarrier granule in bioreactors. The Medical Journal of Malaysia, 63 (Sup A) pp. 18-20
2008 Influence of Manganes Doping into HA Powders on the properties of its Dense Bodies. The Medical Journal of Malaysia, 63 (Sup A) pp. 85-86
2008 Monoclonal antibody production: media optimization for enhancement the cell viability of hybridoma cell. Asian Journal of Scientific Research, 1 (5) pp. 525-531
2008 Monoclonal antibody production: viability improvement of RC1 hybridoma cell in different types of bioreactor. World Journal Microbiology Biotechnology , 24 (9) pp. 1923-1927
2008 Optimizing media of lactobacillus rhamnosus for lactic acid fermentation. Journal of Applied Sciences , 8 (17) pp. 3055-3059
2008 Synthesis and characterization of magnesium doped biphasic calcium phosphate. The Medical Journal of Malaysia, 63 (Sup A) pp. 83-84
2007 Determination of critical point of p02 L]level in the production of lactic acid by Lactobacillus rhamnosus. Journal of Applied Sciences, 7 (4) pp. 523-526
2007 Porous hydroxyapatite for artificial bone applications. Science and Technology of Advanced Materials, 8 (1-2) pp. 116-123
2006 Media screening of lactic acid fermentation using Lactobacillus rhamnosus. Journal of Agricultural Technology, 2 (2) pp. 203-210
2006 The influence of process parameters on lactic acid fermentation in laboratory scale fermenter. Journal of Applied Sciences, 6 (10) pp. 2287-2291
Conference or Workshop Item

2021 Biomass enhancement of Stevia Rebaudiana Bertoni shoot culture in temporary immersion system (TIS) RITA® bioreactor optimized in two different immersion periods. In: The 1st International Conference on Bioenergy and Environmentally Sustainable Agriculture Technology (ICoN BEAT 2019),
2021 Physical treatment of oil palm shell for briquette production as bioenergy at remote area. In: The 1st International Conference on Bioenergy and Environmentally Sustainable Agriculture Technology (ICoN BEAT 2019),
2020 An overview: analysis of ultrasonic-assisted extraction’s parameters and its process. In: 26th Regional Symposium on Chemical Engineering (RSCE 2019@ Kuala Lumpur),
2020 Automated aquaponics maintenance system. In: International Conference on Telecommunication, Electronic and Computer Engineering 2019, ICTEC 2019,
2020 Image restoration using mirroring method which based on the gradient direction. In: The 4th International Conference on Electrical Systems, Technology and Information (ICESTI 2019),
2020 IoT based water quality monitoring system for aquaponics. In: International Conference on Telecommunication, Electronic and Computer Engineering 2019, ICTEC 2019,
2020 Review of implementation life cycle assessment for biodiesel production from palm oil (Elaeis guineensis Jacq.) in Indonesia. In: 1st International Conference on Renewable Energy Research and Challenge, ICoRER 2019,
2020 Technical and economic analysis of municipal solid waste potential for waste to energy plant (Case Study: Jatibarang landfill Semarang, Central Java, Indonesia). In: 1st International Conference on Renewable Energy Research and Challenge, ICoRER 2019,
2018 Antiwashout behavior of calcium phosphate cement incorporated with poly(ethylene glycol). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17),
2018 Biomass and sugar content of some varieties of sorghum (Sorghum Bicolor L. Moench) on dry land forest as feedstock bioethanol. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017,
2018 Characterisation of Arabica coffee pulp - Hay from kintamani - Bali as prospective biogas feedstocks. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017,
2018 Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018 Simulation study of bio-methane conversion into hydrogen for generating 500 kw of power. In: 3rd International Conference on Electrical Systems, Technology and Information, ICESTI 2017,
2018 Surface modification of microporous polycaprolactone (PCL) microcarrier to improve microcarrier biocompatibility. In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018),
2018 Surface modification of polycaprolactone (PCL) microcarrier for performance improvement of human skin fibroblast cell culture. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17),
2018 The effects of excess calcium on the handling and mechanical properties of hydrothermal derived calcium phosphate bone cement. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17),
2017 Effect of Poly(Vinyl Alcohol) addition on the properties of hydrothermal derived calcium phosphate cement for bone filling materials. In: 2nd International Conference on Materials Engineering and Nanotechnology (ICMEN2017),
2017 Novel injectable calcium phosphate bone cement from wet chemical precipitation method. In: 2nd International Conference on Materials Engineering and Nanotechnology, ICMEN 2017,
2017 Upgrading biomethane for low carbon fuel. In: ''4th NATIONAL CONFERENCE ON KNOWLEDGE TRANSFER (NCKT'17)'' “Knowledge Translation for National Transformation”,
2016 A simulation study for the upgrading of biogas using aqueous ammonia. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Biogas upgrading by chemical absorption using a packed column apparatus. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Culture of five species of Malaysia indigenous freshwater microalgae . In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Statistical optimization of gelatin immobilization to improve PCL microcarrier surface. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Valorization of household waste and camel dung via biogas production. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Vero cell culture on magnesium doped biphasic calcium phosphate scaffolds. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2015 Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. In: 1st UMM International Conference on Pure and Applied Research (UMM-ICoPAR),
2015 Modification of Polycaprolactone microspheres surface by ultra violet/ozone treatment to improve its hydrophilicity. In: 1st UMM International Conference on Pure and Applied Research (UMM-ICoPAR),
2015 Preliminary study of biogas upgrading and purification by pressure swing adsorption. In: 1st International Conference on Science and Technology 2015 (ICST-2015),
2015 Removal of CO2 from biogas plant using chemical absorption column. In: 1st International Conference on Science and Technology 2015 (ICST-2015),
2014 Development new media (feedstock) for biogas production. In: 3rd Biogas Asia Pacific Forum,
2014 Effect of organic loading rate (OLR) of slurry on biogas production quality . In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014),
2014 Preliminary study on biohydrogen production by bacteria from sago waste. In: 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014),
2013 Biogas production by codigestion of fruit and vegetable wastes: organic loading rate (OLR) effect study. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01),
2013 Development of polystyrene microcarrier by an emulsion solvent evaporation process. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013,
2013 Effects of glutamine and serum on IGF-I dependent CHO-K1 cell growth in T-flask. In: 3rd International Conference on Biotechnology Engineering 2013 (ICBioE 2013),
2013 Effects of process parameters on spray drying of recombinant bromelain. In: 3rd International Conference on Biotechnology Engineering (ICBIoE 2013),
2013 Fabrication of gelatin coated polycaprolactone (PCL) microspheres for cell culture application. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013,
2013 GCMS-based global metabolite analysis approach distinguishes CHO-K1 cells cultured in different levels of serum and glutamine. In: 3rd International Conference on Biotechnology Engineering (ICBIoE 2013,
2013 Industrial training outcomes: Kulliyyah of Engineering practice as a case study . In: International Conference on Engineering Education 2013,
2013 Preparation and characterization of polycaprolactone (PCL) microspheres for cell culture applications. In: 3rd International Conference on Biotechnology (ICBioE'13),
2013 Studies on the process condition that affect the size of polystyrene microcarrier by an emulsion solvent evaporation process. In: 3rd International Conference on Biotechnology Engineering (ICBIoE 2013,
2012 AT-303:Comparison of Sago and Sweet Sorghum for Ethanol production using Saccharomyces Cerevisiae. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012,
2012 BPE-P01: Optimization of media for mass production of Schizophyllum commune using response surface methodology (RSM). In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012,
2012 BPE-P04: the effect of plant oils for submerged fermentation of Schizophyllum commune producing mycelium biomass and exopolysaccharides. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012,
2012 Cytotoxicity study of Schizophyllum commune extract towards DF-1 cell line. In: 26th Symposium of Malaysian Chemicals Engineers in conjunction with the 4th International Conference on Chemical and Bioprocess Engineering,
2012 Extraction of glucose from kenaf core using mild acid treatment . In: 26th Symposium of Malaysian Chemicals Engineers in conjunction with the 4th International Conference on Chemical and Bioprocess Engineering,
2012 Production of lactic acid from kenaf core hydrolysate by rhizopus oryzae FTCC 5215. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2012),
2011 A Cryopreservatlon method of Sclzaphyllurn commune local strains. In: International Congress of the Malaysian Society for Microbiology 2011,
2011 Analysis of engine performance with enhanced fuel. In: 3rd (2011) CUTSE International Conference,
2011 Analysis of engine performance with NGV. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Carbon and Nitrogen Effect on Exopolysaccharides Production of Schizophyllum commune. In: International Congress of the Malaysian Society for Microbiology 2011,
2011 CHO-K1 cells expressed IGF-1 Gene: a promising target towards optimal media at effective cost. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Comparison of two total RNA extraction protocols from CHO-KI cells for RT-PCR: cut-off cost for researcher. In: The 3rd Curtin University Technology, Science and Engineering (CUTSE) ,
2011 Dehydration of Ethanol on Zeolite based media using adsorption process. In: 3rd (2011) CUTSE International Conference,
2011 Effects of different types of growth media on metabolite profiles (GCMS-based) of CHO-K1 cells expressing IGF-1 proteins. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Extraction of astaxanthin from shrimps by-products through fermentation process. In: International Health Conference IIUM 2011 ,
2011 Heterologous expression of Bromelain in Escherichia coli. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Kenaf as natural resource for lactic acid production. In: Malaysia Polymer International Conference 2011 (MPIC 2011),
2011 Kenaf biomass as potential biopolymer. In: Malaysia Polymer International Conference 2011 (MPIC 2011),
2011 Kenaf: renewable source for biopolymer. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011,
2011 Optimization of newcastle disease virus production in t-flask. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Optimizing the pre-treatment of kenaf bast. In: Malaysia Polymer International Conference 2011 (MPIC 2011),
2011 Prediction of significant factors in the production of ethanol by ragi tapai co-culture using taguchi methodology. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Serum in mammalian cell culture: weighing the challenges of bioprocessing, ethics and animal welfare. In: 2nd International Conference on Professional Ethics and Education in Engineering 2011 (ICEPEE'11),
2011 Simple process capability analysis and quality validation of monoclonal antibody production in bench-top bioreactor. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Study of cells attachment using impedance spectroscopy technique . In: International Mechanical Engineering Congress & Exposition (IMECE 2011),
2011 Study of cells attachment using impedance spectroscopy technique. In: ASME International Mechanical Engineering Congress and Exposition (ASME 2011),
2011 The importance of a standardized Islamic manufacturing (IMP) for food and pharmaceutical productions. In: 2nd International Conference on Professional Ethics and Education in Engineering 2011 (ICEPEE'11),
2010 Bioethanol production from sago starch. In: International Conference on Technology for New and Renewable Energy (ICT-NRE),
2010 Biogas energy potential in Riau Indonesia. In: International Conference on Technology for New and Renewable Energy (ICT-NRE),
2010 Electrical cell-substrate impedance sensing (ECIS) based biosensor for characterization of DF-1 cells. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010 Ethanol fermentation from raw starch of sweet sorghum grains. In: International Conference on Technology for New and Renewable Energy(ICT-NRE),
2010 Fabrication of Adsorber Bed Apparatus for dehydration of ethanol on Zeolite based media. In: International Conference on Technology for New and Renewable Energy(ICT-NRE),
2010 Floating porous ceramics for high densiti cell culture in stirred bioreactors. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Hydrolysis of sorghum starch for ethanol production. In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010),
2010 IGF-1 protein expression in cultured CHO cells. In: 3rd IIUM-iCAST International Conference on Advancement in Science and Technology,
2010 Lactic acid production from Kenaf fibre. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Methods of detection of hazardous materials using quartz crystal microbalance. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 New potential of biomaterials from kenaf fibre biomass . In: Islamic Innovation Expo 2010 (i-Inova’ 2010),
2010 Newcastle disease vaccines;improvement of virus purification by using high speed centrifugation. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Oil algae extraction from nannochloropsis SP: a study of soxhlet extraction and ultrasonic assisted extraction. In: International Conference on Process Engineering and Advanced Materials 2010 (ICPEAM2010) ,
2010 Optimization of Single-step Bioconversion Process using Taguchi’s method for the production of Multiple Valuable Fermentation-products. In: The 13th Asia Pacific Confederation of Chemical Engineering Congress,
2010 Optimizing Bioethanol Production from Sago Starch in Bioreactor for Renewable Energy. In: International Conference on Advances in Renewable Energy Technologies,
2010 Simulation of a surface transverse wave biosensor for DF-1 cells. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010 Simulation of a surface-transverse wave (STW) biosensor for DF-1 cells. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Simulations of surface and bulk acoustic wave MEMS biosensors. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP),
2010 Synthesis of TiO2 nanosized powder photocatalyst via soft-gel method for bacteria inactivation application. In: 19th Scientific Conference of Electron Microscopy Society of Malaysia (EMSM),
2009 Biotechnology for agroindustries. In: International Conference for Agriculture and Food Production 2009,
2009 Cell rupture of recombinant escherichia coli using high pressure homogenizer. In: 3rd International Conference on Chemical and Bioprocess Engineering,
2009 Fabrication of ceramic membrane chromatography for biologics purification. In: Advanced materials and Processing Technologies,
2009 Fabrication system for surface modification of polystyrene beads by UV/Ozone treatment and its characterization. In: Advances in Materials and Processing Technologies,
2009 Improvement of filtration process for nucleocapsid protein of Newcastle disease virus. In: Malaysian International Conference on Trends in Bioprocess Engineering.,
2009 MEMS biosensor for potential cancer cell detection. In: ASME International Mechanical Engineering Congress & Exposition (ASME 2009),
2009 Optimization of serum preparation in Vero cell culture using a statistical approach. In: 3rd International Conference on Chemical & Bioprocess Engineering ,
2009 Recovery of virus producing NDV vaccine by Tangential Flow Filtration (TFF). In: 3rd International Conference on Chemical & Bioprocess Engineering ,
2008 Comparison of growth rate and viability of DF-1 cell line in different culture media. In: 2nd International Conference on Science and Technology. ,
2008 Growth study of DF-1 cell line in microcarrier bioreactor. In: 2nd International Conference on Science and Technology.,
2008 Innovative process optimization using organic base for reactive lactic acid recovery. In: Malaysian Technology Expo (MTE 2008) ,
2008 Optimization of process conditions for lactic acid recovery using organic base. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008,
2007 A study on engine performance operating on compressed biogas. In: 3rd National Conference on Knowledge Transfer (NCKT'16),
2007 New process development for lactic acid recovery. In: International Exposition of Research and Inventions of Institutions of Higher Learning 2007 (PECIPTA'07),
2007 Reactive lactic acid extraction by new process optimization using organic base. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007),
2005 Growth kinetics study and process optimization of lactic acid fermentation in laboratory scale fermenter. In: 2nd International Conference on Chemical and Bioprocess Engineering (ICCBpE-SOMChE 2005),
2005 Media screening and optimization of lactic acid fermentation. In: 2nd International Conference on Chemical and Bioprocess Engineering (ICCBpE-SOMChE 2005),
Book

2011 Bioprocessing of lactic acid by fermentation technique. IIUM Press, ISBN: 9789674180935
2011 Bioprocessing of recombinant E.Coli producing β- glucuronidase enzyme. IIUM Press, ISBN: 9789674180102
2011 Introduction to cell culture for engineering. IIUM Press, ISBN: 9789674180713
2011 Recent development of microcarrier for cell culture engineering . IIUM Press, International Islamic University Malaysia, ISBN: 9789674180096
2011 Taguchi method in bioprocess engineering: case studies. IIUM Press, ISBN: 9789674180766
Book Section

2017 Cassava leaves and stems hydrolysis for glucose production. In: IIUM Press, International Islamic University Malaysia, ISBN: 9789674185473, pp. 1-8
2014 Polylactic acid-based kenaf biomass synthesized via ring opening polymerization. In: Springer International Publishing, ISBN: 978-3-319-07577-8; 978-3-319-07578-5 (ebook), pp. 211-231
2012 Single-Step Bioconversion of Unhydrolyzed Cassava Starch in the Production of Bioethanol and its Value-Added Products. In: InTech Co, ISBN: 978-953-51-0008-9. , pp. 33-50
2011 Analysis of engine performance with enhanced fuel. In: IIUM Press, ISBN: 9789674181581, pp. 147-155
2011 Analysis of engine performance with NGV. In: IIUM Press, ISBN: 9789674181581, pp. 140-146
2011 Batch fermentation of recombinant Escherichia coli producing β-glucuronidase using different control condition. In: IIUM Press, ISBN: 9789674181444, pp. 61-72
2011 Batch fermentation of recombinant Escherichia coli producing β-glucuronidase using different control conditions . In: IIUM Press, ISBN: 9789674180102, pp. 37-48
2011 Biocompatibility of porous hydroxyapatite microcarrier for vero cell culture application . In: IIUM Press, ISBN: 9789674180096, pp. 43-50
2011 Bioethanol production from sago starch. In: IIUM Press, ISBN: 9789674181635, pp. 41-58
2011 Bioreactor for animals cells . In: IIUM Press, ISBN: 9789674180713, pp. 59-67
2011 Case study 1: process improvement of pharmaceutical grade ethanol production. In: IIUM Press, ISBN: 9789674180766, pp. 59-74
2011 Case study 2: process optimization of lactic acid production in fermenter. In: IIUM Press, ISBN: 9789674180766, pp. 75-87
2011 Case study 3: optimization of coenzyme Q10 production in biorector. In: IIUM Press, ISBN: 9789674180766, pp. 89-102
2011 Case study 4: improvement of clarification and separation process for hybridoma cell supernatant. In: IIUM Press, ISBN: 9789674180766, pp. 103-112
2011 Case study 5: analysis of process capability and quality of monoclonal antibody production in biorector. In: IIUM Press, ISBN: 9789674180766, pp. 133-149
2011 Cell attachment study of chicken fibroblast cell (DF-1) using Ceramic microcarrier granule in bioreactors . In: IIUM Press, ISBN: 9789674180096, pp. 131-140
2011 Cell disruption improvement of E. Coli producing NP-AIV using high pressure homogenizer. In: IIUM Press, ISBN: 9789674181444, pp. 79-83
2011 Cell disruption of recombinant E. coli producing β- Glucuronidase by high pressure homogenizer. In: IIUM Press, ISBN: 9789674180102, pp. 83-92
2011 Control strategy of fed-batch fermentation of E.coli producing recombinant β-glucuronidase . In: IIUM Press, ISBN: 9789674180102, pp. 49-61
2011 Crossflow microfiltration of recombinant Escherichia coli producing β-glucuronidase enzyme . In: IIUM Press, ISBN: 9789674180102, pp. 73-82
2011 Culture medium . In: IIUM Press, ISBN: 9789674180713, pp. 35-46
2011 Debottleneck strategy and economic analysis of β-glucuronidase enzyme production . In: IIUM Press, ISBN: 9789674180102, pp. 125-143
2011 Design of experiments Using Taguchi's approach. In: IIUM Press, ISBN: 9789674180766, pp. 17-29
2011 Determination of critical pO2 level and process online monitoring of lactic acid fermentation by Lactobacillus rhamnosus. In: IIUM Press, ISBN: 9789674180935, pp. 63-72
2011 Efect of pO2 level on the Fermentation of Lactobacillus rhamnosus. In: IIUM Press, ISBN: 9789674180935 , pp. 37-50
2011 Effect of different process conditions on lactic acid production by Lactobacillus rhamnosus. In: IIUM Press, ISBN: 9789674180935 , pp. 73-82
2011 Effect of process parameters on distribution coefficient of lactic acid by using Alamine 336 . In: IIUM Press, ISBN: 9789674180935 , pp. 113-123
2011 Evaluation on biological performance of porous pure and magnesium-doped biphasic calcium phosphate ceramics using vero cell culture . In: IIUM Press, ISBN: 9789674180096, pp. 51-59
2011 Extraction of glucose from Kenaf core by using chemical pre-treatment process. In: IIUM Press, ISBN: 9789674181673, pp. 90-95
2011 Factors affecting the hydrolysis process of Kenaf Biomass for lactic acid production. In: IIUM Press, ISBN: 9789674180935 , pp. 93-99
2011 Fowl cholera vaccine production: process optimization in laboratory scale fermenter . In: IIUM Press, ISBN: 9789674181444, pp. 147-158
2011 Fowl cholera vaccine production: screening and optimization of media in shake flask culture . In: IIUM Press, ISBN: 9789674181444, pp. 155-161
2011 Growth kinetic study of Rhizopus oryzae via fermentation of lactic acid from kenaf biomass. In: IIUM Press, ISBN: 9789674180935, pp. 101-111
2011 Gum Arabic: a narrative emulsifying agent. In: IIUM Press, ISBN: 9789674181444, pp. 105115
2011 Improvement of recombinant E.coli fermentation producing β-glucuronidase enzyme by Taguchi's design. In: IIUM Press, ISBN: 9789674180102, pp. 21-36
2011 Introduction . In: IIUM Press, ISBN: 9789674180713, pp. 1-9
2011 Introduction to Taguchi Method. In: IIUM Press, ISBN: 9789674180766, pp. 1-15
2011 Lactic acid, its processing and utilization in industry: a review. In: IIUM Press, ISBN: 9789674180935 , pp. 1-16
2011 Locally processed serum performance in vero cell culture: Part I . In: IIUM Press, ISBN: 9789674180096, pp. 61-72
2011 Locally processed serum performance in vero cell culture: Part II . In: IIUM Press, ISBN: 9789674180096, pp. 73-84
2011 Media optimization for fermentation of recombinant Escherichia Coli using response surface methodology . In: IIUM Press, ISBN: 9789674180102, pp. 1-19
2011 Media screening of Lactobacillus rhamnosus fermentation for lactic acid production . In: IIUM Press, ISBN: 9789674180935 , pp. 17-24
2011 Microcarriers for cell culture technology . In: IIUM Press, ISBN: 9789674180713, pp. 79-89
2011 Mode of cell culture. In: IIUM Press, ISBN: 9789674180713, pp. 11-25
2011 Modeling the growth kinetics of Escherichia Coli fermentation in bioreactors. In: IIUM Press, ISBN: 9789674180102, pp. 115-123
2011 Modes of bioreactor operations . In: IIUM Press, ISBN: 9789674180713, pp. 69-77
2011 Newcastle Disease virus propagation in stirred tank bioreactor: part I . In: IIUM Press, ISBN: 9789674180096, pp. 159-170
2011 Newcastle Disease Virus propagation in stirred tank bioreactor: part II . In: IIUM Press, ISBN: 9789674180096, pp. 171-183
2011 Optimization of crossflow nanofiltration for separation and concentration of β-glucuronidase enzyme . In: IIUM Press, ISBN: 9789674180102, pp. 93-100
2011 Optimization of kenaf biomass's pre-treatment for polylactic acid's monomer production. In: IIUM Press, ISBN: 9789674180218, pp. 111-120
2011 Optimization of media for lactobacillus rhamnosus fermentation for lactic acid production . In: IIUM Press, ISBN: 9789674180935, pp. 25-36
2011 Optimization of process condition for E. Coli fermentation producing nucleocapsid protein-avian influenza virus (NP-AIV). In: IIUM Press, ISBN: 9789674181444, pp. 73-78
2011 Optimization of process conditions for high cell density proliferation of DF-1 cells in bioreactor . In: IIUM Press, ISBN: 9789674180096, pp. 141-148
2011 Optimization of process parameters using response surface design on distribution coefficient of lactic acid . In: IIUM Press, ISBN: 9789674180935 , pp. 125-139
2011 Optimizing bioethanol production from sago starch in bioreactor for renewable energy. In: IIUM Press, ISBN: 9789674181635, pp. 59-70
2011 Phases of cell culture. In: IIUM Press, ISBN: 9789674180713, pp. 27-34
2011 Process optimization of lactic acid fermentation in bioreactor. In: IIUM Press, ISBN: 9789674180935 , pp. 51-62
2011 Response surface methodology design for bioreactor operation. In: IIUM Press, ISBN: 9789670225869, pp. 155-169
2011 Serum free medium . In: IIUM Press, ISBN: 9789674180713, pp. 47-57
2011 Synthesis lactic acid from Kenaf Bast by using Lactobacillus rhamnosus. In: IIUM Press, ISBN: 9789674180935 , pp. 83-91
2011 Taguchi on quality improvement. In: IIUM Press, ISBN: 9789674180766, pp. 113-131
2011 Taguchi robust design creation by STATISTICA software. In: IIUM Press, ISBN: 9789674180766, pp. 31-58
2011 The effect of hydroxyapatite addition on biocompatibility of porous alumina microcarriers for vero cell culture . In: IIUM Press, ISBN: 9789674180096, pp. 33-42
2011 The effect of saccharification process of sago starch into sugar. In: IIUM Press, ISBN: 9789674181635, pp. 71-77
2011 The growth culture of BRIN-BD11 producing insulin in different type of microcarriers . In: IIUM Press, ISBN: 9789674180096, pp. 97-109
2011 The growth rate and viability of DF1 cell in different culture media . In: IIUM Press, ISBN: 9789674180096, pp. 111-119
2011 The growth study of DF1 cell in microcarrier based bioreactor . In: IIUM Press, ISBN: 978-967-418-009-6, pp. 121-129
2011 The kLa evaluation of recombinant Escherichia coli fermentation producing β-glucuronidase enzyme . In: IIUM Press, ISBN: 9789674180102, pp. 63-71
2011 The study of immobilized bovine and fish gelatin on carboxyl containing polystyrene beads for vero cell culture . In: IIUM Press, ISBN: 9789674180096, pp. 23-31
2011 The study of NDV Titer using different cell lines in T-Flask culture . In: IIUM Press, ISBN: 9789674180096, pp. 159-170
2011 The vero cells growth in different type of microcarriers. In: IIUM Press, ISBN: 9789674180096, pp. 85-95
2011 Ultraviolet/ozone treatment for polystyrene beads modification and its effect on gelatin coating. In: IIUM Press, ISBN: 9789674180096, pp. 11-22
2011 UV/ozone treatment system for polystyrene beads modification. In: IIUM Press, ISBN: 9789674180096, pp. 1-10
2011 Virus culture : concept and procedures. In: IIUM Press, ISBN: 9789674180713, pp. 91-104
2009 Prophetic philosophy of pharmaceutics. In: IIUM Press, ISBN: 9789833855674, pp. 59-66
2009 Vaccine manufacturing in Islamic perspective. In: IIUM Press, ISBN: 9789833855674, pp. 147-151
2008 Optimization of process conditions for lactic acid recovery using organic base. In: Springer-Verlag Berlin Heidelberg, ISBN: , pp. 875-878