Staff Directory

Academic Qualification
- Ph.D in Manufacturing System - Doctor of Philosophy, University of Huddersfield
- Master of Science (Engineering) - Masters Degree, University of Birmingham
- Bachelor of Engineering in Mechanical Engineering - Bachelor Degree, Polytechnic of Huddersfield
Erry Yulian Triblas Adesta (Prof. Dr.)
Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
Other's position:
Head, Kulliyyah of Engineering
eadesta@iium.edu.my
4452
Expert Profile
My expertise is in the area of Manufacturing Systems and Engineering covering, but not limited to the following area Smart Manufacturing, Agile and Sustainable Manufacturing, Value Analysis and Value Engineering, Factory of the Future.
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Fabrication Technology (Including Manufacturing of High Speed/ Precision Equipment Fabrication Machinery and Equipment and Standard Supporting Technologies of Fabrication for Metal and Plastic) - Precision Engineering
- Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - High Speed Machining, Machining Cost
Teaching Responsibilities
COMPUTER AIDED DRAFTING | 2009/2010 2008/2009 2007/2008 2010/2011 |
EGRONOMICS AND WORKSTATION DESIGN | 2010/2011 2008/2009 |
ENGINEERING COST ANALYSIS | 2015/2016 |
ENGINEERING DRAWING | 2008/2009 2009/2010 2010/2011 2018/2019 |
ENGINEERING MANAGEMENT | 2008/2009 2011/2012 2007/2008 |
ENGINEERING PROJECT MANAGEMENT | 2012/2013 2007/2008 2008/2009 2011/2012 |
ERGONOMICS | 2008/2009 2009/2010 2007/2008 |
FINAL YEAR PROJECT II | 2019/2020 |
INTERGRATED DESIGN PROJECT | 2019/2020 |
MANUFACTURING DRAWING | 2013/2014 2010/2011 2012/2013 2015/2016 2014/2015 2011/2012 |
MANUFACTURING ENGINEERING LAB III | 2012/2013 |
MANUFACTURING ENGINEERING LAB I | 2011/2012 2015/2016 2012/2013 2014/2015 2013/2014 |
MANUFACTURING ENGINEERING LAB II | 2009/2010 2007/2008 2010/2011 2011/2012 2008/2009 |
MANUFACTURING PROCESSES | 2010/2011 |
PRODUCTION SYSTEM ANALYSIS | 2016/2017 |
PROJECT & OPERATIONS MANAGEMENT | 2019/2020 2020/2021 2018/2019 |
PROJECT I | 2019/2020 2018/2019 |
QUANTITATIVE TECHNIQUES | 2018/2019 2019/2020 2020/2021 |
RESEARCH METHODOLOGY & SEMINAR | 2020/2021 |
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (MIXED MODE) | 2020/2021 |
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (RESEARCH MODE) | 2020/2021 |
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG | 2015/2016 2018/2019 2016/2017 2017/2018 |
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG (MIXED MODE) | 2020/2021 |
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG(RESEARCH MODE) | 2015/2016 2018/2019 2016/2017 2017/2018 |
RESEARCH METHODOLOGY AND SEMINAR | 2018/2019 2017/2018 |
RESEARCH METHODOLOGY AND SEMINAR IN MFG ENG (RESEARCH MODE) | 2020/2021 |
RESEARCH METHODOLOGY IN MAT ENG & SEMINAR | 2018/2019 2015/2016 2017/2018 2016/2017 |
RESEARCH METHODOLOGY IN MAT ENG & SEMINAR (RESEARCH MODE) | 2017/2018 2016/2017 2015/2016 2018/2019 |
RESEARCH METHODOLOGY IN MFG & MATERIALS ENGIN | 2014/2015 2009/2010 2015/2016 2013/2014 2011/2012 2012/2013 2016/2017 2010/2011 |
VALUE ANALYSIS AND VALUE ENGINEERING | 2020/2021 2018/2019 2017/2018 2013/2014 2016/2017 2019/2020 |
WORKSHOP TECHNOLOGY | 2009/2010 2010/2011 2007/2008 2013/2014 2016/2017 2012/2013 2014/2015 2008/2009 2015/2016 2011/2012 |
Research Projects
Completed
2015 - 2018 | Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive |
2015 - 2019 | Developing a real time localization system for autonomous robots in flexible manufacturing systems for indoor production environment |
2014 - 2015 | Multi Objective Optimization for the Cutting Process in High Speed End Milling |
2014 - 2017 | Effect of Tool Path Strategies on Surface Quality of AISI H13 During Pocketing in High Speed End Milling |
2014 - 2017 | Damage Identification of Imperfect Adhesively Bonded Structural Joint using Modal Analysis |
2011 - 2013 | High Speed Machining (KVC Project 2011) |
2011 - 2015 | RU 2011: Development of Rotary Friction Welding Model to Predict its Welding Performance |
2010 - 2012 | Development of Embedded system for remote operation of CNC milling |
2010 - 2013 | Prediction of Surface Roughness in High Speed End Milling Operating due to tool run out and back cutting phenomenon |
2010 - 2013 | High Speed Turning of Hardened Steel using Coated Carbide Inserts |
2009 - 2011 | Investigation the Effect of Utilizing Different Grade of Recycled Polymide 12 on Part Surface in Selective Laser Sintering |
2008 - 2010 | The Influence of Toughness and Thermal Hardness to Tool Life during High Speed Turning of Mild Steel |
2008 - 2011 | Development of a Pilot-scale Web-based Inventory Management System for Lab Equipment and Consumable |
On-Going
2017 - Present | Application of Solar Energy Through Scheffler Collector System in Equator Region for Melting Metal at 300 Celcius |
2015 - Present | Developing Fundamental Knowledge on Tool Path Strategy during Pocket Milling Operation of AISI H13 |
2010 - Present | Enhancement of the properties of zinc based alloy by adding elements for giftware |
2007 - Present | Agile and Sustainable Manufacturing Research Unit (ASMARU) |
- | Machinability Investigation of GO/SiO2 Hybrid Nanoparticle ? MQL Lubrication System in End Milling of Titanium Alloy for Sustainable Machining Environment |
- | Elucidation of the cutting temperature induced-damaged of CFRP during edge milling in sustainable manufacturing environment. |
- | Characterisation of Mechanical and Structural Properties of 3D Printed Metal Composite via Fused Deposition Modeling (FDM) |
Award & Recognition
13 Jul, 2017 | Certificated Lead Auditor ISO 9001:2000 - World Quality Assurance (WQA) UK | International |
Publications
Article
Conference or Workshop Item
2020 | A design consideration of heated bed's rapid levelling tool based on von misses stress using FEA simulation. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, |
2020 | Assessment of flank wear and tool life in high speed face milling under dry and near dry machining. In: 5th North American International Conference on Industrial Engineering and Operations Management, |
2020 | Flank wear prediction in high-speed face milling using Monte Carlo simulation method. In: 5th North American International Conference on Industrial Engineering and Operations Management, |
2020 | Total productive maintenance implementation’s barriers and enablers in Indonesian manufacturing companies. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, |
2019 | Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018), |
2018 | A study of tensile test on open-cell aluminum foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Compressive behaviour and energy absorption of aluminium foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2018 | Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), |
2018 | Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2018 | Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), |
2018 | Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), |
2018 | Productivity improvement using discrete events simulation. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, |
2018 | Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), |
2017 | An integrated approach for facilities planning by ELECTRE method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), |
2017 | Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2017 | Empirical study on AGV guiding in indoor manufacturing system using color sensor. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), |
2017 | Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), |
2017 | Simulation of real time tracking system using RFID technology to enhance quality activities in flexible manufacturing system. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), |
2017 | Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), |
2016 | Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), |
2016 | Modelling and analysing deadlock in flexible manufacturing system using untimed petri net. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), |
2016 | Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), |
2016 | Using soft computing methods as an effective tool in predicting surface roughness. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), |
2015 | Modeling a conceptual framework for owner- contractor relationship and time–cost trade-off using fuzzy logic technique. In: 3rd International Conference on Advanced Computer Science Applications and Technologies – ACSAT2014, |
2014 | Development of design structure matrix of a product architecture. Case study: multi purpose CNC router . In: IIUM Engineering Congress 2014, |
2014 | Development of design structure matrix of product architecture case study: multi purpose CNC router . In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), |
2013 | Flank wears simulation by using back propagation neural network when cutting hardened H-13 steel in CNC End Milling. In: 5th International Conference on Mechatronics (ICOM'13), |
2013 | Simulation of tool life for ceramic with negative rake angle using neural network . In: International Conference on Advanced Computer Science Applications and Technologies 2013, |
2013 | Surface roughness modeling for CNC end milling using artificial neural network . In: 5th International Conference on Mechatronics (ICOM'13), |
2012 | Cutting temperature and surface roughness optimization in CNC end milling using multi objective genetic algorithm. In: 2012 International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2012, |
2012 | prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened h-13 steel in CNC end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012), |
2011 | Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), |
2011 | Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), |
2011 | Investigation of the effect of "Orange Peel" surface texture on the laser sintered part. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), |
2011 | Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, |
2011 | The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, |
2011 | The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), |
2010 | Biogas energy potential in Riau Indonesia. In: International Conference on Technology for New and Renewable Energy (ICT-NRE), |
2010 | Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: , |
2010 | Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: , |
2010 | Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: , |
2010 | Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: , |
2010 | Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010, |
2010 | The development of tool life estimation model based on volume loss method. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), |
2009 | Flank wear modeling in high speed turning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), |
2009 | Machining time stimulating in high speed hard tuning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), |
2009 | Modeling electric field distribution on insulator under electron bombardment in vacuum. In: Proceedings of World Academy of Science, Engineering and Technology, |
2009 | Tool life in high speed turning with negative rake angle. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), |