Hadi Purwanto graduated from the Department of Mechanical Engineering (Metallurgy Programme), Institute Technology Sepuluh Nopember, Indonesia. He worked as a junior research assistant at the Research Centre for Mineral for three years before continuing his studies. He obtained his Master in Engineering and Degree of Doctor of Philosophy in Metallurgy from Tohoku University (Japan), specializing in iron and steel making.
He spent one year at the Osaka Prefecture University as a Research Fellow in the Chemical Engineering Department before his appointment as Post-Doctoral Research Fellow at Hokkaido University Japan focusing on waste heat recovery and hydrogen energy.
He also gained experience on the processing of oil sludge from oil industry. After completing his research in Japan, he was appointed as Head of Surabaya office at Marubeni Itochu Steel Indonesia before joining International Islamic University Malaysia in 2008. His research interests are ironmaking process, biomass energy processing and waste materials processing as well as waste heat recovery from high temperature process industry.

• 1999 - 2021: Member of Profesional Body / Association: (member), ISIJ
• 2010 - 2021: Member of Profesional Body / Association: (member), SEAISI
• 2014 - 2021: Member of Profesional Body / Association: (member), Institute of Materials Malaysia
• 2018: Member of Profesional Body / Association: (Member), I'M RESEARCH CONSORTIUM

ADVANCED METALLIC MATERIALS	2020/2021
ADVANCED THERMODYNAMICS OF MATERIALS	2010/2011 2011/2012 2009/2010 2012/2013
Corrosion and Degradation	2018/2019 2020/2021 2017/2018 2021/2022 2016/2017 2019/2020
CORROSION PROCESSES AND PROTECTION	2020/2021 2019/2020
ENGINEERING MATERIALS	2008/2009
Extractive and Physical Metallurgy	2020/2021 2021/2022
FAILURE ANALYSIS OF MATERIALS	2008/2009 2009/2010
FINAL YEAR PROJECT I	2018/2019 2019/2020
FINAL YEAR PROJECT II	2019/2020
HEAT TREATMENT	2013/2014
INTRODUCTION TO ENGINEERING WORKSHOP	2021/2022
MATERIALS CHARACTERIZATION AND NON-DESTRUCTIVE TESTING	2016/2017 2017/2018
MATERIALS ENGINEERING LAB V	2013/2014
MATERIALS LABORATORY	2008/2009
NDT AND EVALUATIONS	2013/2014 2015/2016 2014/2015 2017/2018 2016/2017
NONDESTRUCTIBE TESTING OF MATERIALS	2020/2021
NONDESTRUCTIVE EVALUATION OF STRUCTURES	2009/2010
NONDESTRUCTIVE TESTING OF MATERIALS	2011/2012 2012/2013 2018/2019
NONDESTUCTIVE TESTING AND EVALUATION	2013/2014 2009/2010 2008/2009 2010/2011
PRODUCTION OF FERROUS & NON FERROUS METALS	2008/2009
PRODUCTION OF FERROUS AND NON-FERROUS	2011/2012 2010/2011 2008/2009 2012/2013
PRODUCTION OF METALS	2015/2016 2013/2014 2016/2017 2018/2019 2017/2018 2014/2015
PROJECT I	2010/2011 2011/2012 2009/2010
THERMODYNAMICS OF MATERIALS	2014/2015 2009/2010 2008/2009
WORKSHOP TECHNOLOGY	2018/2019 2016/2017 2010/2011 2012/2013 2015/2016 2017/2018 2019/2020 2011/2012 2020/2021

Completed

2017 - 2017	Metallurgical Study of Keris and It's Preservation Technique
2013 - 2016	Development of Carbon Infiltrated Iron Ore using Bio-tar from Sawdust Pyrolysis
2012 - 2015	Upscalling of Zero Emission Process for Hydrogen and Alumina Productions from Waste Management
2012 - 2016	Development process and manufacturing of modern medical implants (Maxillofacial Surgery )using rapid prototyping technology
2012 - 2021	Pilot Plant Production of Carbon-Doped Iron Ore Using Agro-Residues as Source of Energy and Processing Material
2011 - 2014	Utilization of Biomass Waste as Energy Source in Iron Making
2011 - 2012	Probability Safety Assessment for Nuclear Power PLant (KVC Project 2011)
2011 - 2012	Hydrogen Production from Waste Aluminum Chip
2011 - 2012	Design and Fabrication of Emergency Air Pump for Punched Tire Motor Cycle
2010 - 2011	Effect of the degree of chromium carbide precipitation on the corrosion on SS304
2010 - 2010	Royal Selangor International SDN BHD
2009 - 2010	Measurement of the Degree of Chromium carbide precipitation of SS304
2009 - 2010	Preparation of Silica from Rice Husk Gasification

On-Going

2019 - Present	Environmental friendly municipal solid waste (MSW) leachate treatment using hydrothermal treatment processing (HTTP)
2019 - Present	Investigation on cement clinker production using waste heat from molten blast furnace slag
2019 - Present	Development of high temperature corrosion protection of metallic alloys
2016 - Present	Carbon Enrichment of EFB-Derived Biochar for Biofuel Application Via Chemical Vapor Infiltration Method
2010 - Present	Enhancement of the properties of zinc based alloy by adding elements for giftware
2009 - Present	Advanced Materials and Surface Engineering (AMSERU)
2006 - Present	Laparoscopic Hernioplasty Under Spinal Anesthesia

18 Mar, 2016	Best Sport Award - IIUM	University
18 Mar, 2016	Sport Achievement Award - IIUM	University
21 Sep, 2015	Dept. Best Non-indexed Journal Articles - IIUM	University

Article

2020	Education for sustainable development as diffusion of innovation of secondary school students. Journal of Teacher Education for Sustainability, 22 (1) pp. 84-97
2020	New approach of Municipal Solid Waste (MSW) leachate treatment using hydrothermal method. TEST Engineering & Management, 83 () pp. 1117-1121
2019	Characterization of municipal solid waste in Malaysia for energy recovery. IOP Conference Series: Earth and Environmental Science, 264 (1) pp. 1-6
2018	Effect of charcoal derived from oil palm empty fruit bunch on the sinter characteristics of low grade iron ore. Journal of Cleaner Prodcution, 200 () pp. 954-959
2018	Innovative process to enrich carbon content of EFB-derived biochar as an alternative energy source in ironmaking. Advances in Materials Science and Engineering, 2018 () pp. 1-7
2017	Growth conditions of graphene grown in Chemical Vapour Deposition (CVD). Sains Malaysiana, 46 (7) pp. 1033-1038
2017	Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters, 23 (7) pp. 6237-6241
2016	Enhancement of oil palm empty fruit bunch char by impregnation of pyrolytic carbon from tar vapor decomposition. Journal of Renewable and Sustainable Energy, 8 (1) pp. 013110-1-013110-11
2016	New technology for biochar production from oil palm empty fruit bunch. ARPN Journal of Engineering and Applied Sciences, 11 (1) pp. 368-371
2016	Utilization of low-grade iron ore in ammonia decomposition. Procedia Chemistry, 19 () pp. 119-124
2015	CO2 emissions for concrete bore piling construction. Jurnal Teknologi, 77 (30) pp. 25-34
2015	Development of carbon-infiltrated bio-char from oil palm empty fruit bunch. ISIJ International, 55 (2) pp. 436-440
2015	Utilization of Malaysian low grade iron ore as medium for ammonia decomposition. ARPN Journal of Engineering and Applied Sciences, 10 (22) pp. 17286-17288
2014	Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore. International Journal of Mineral, Metallurgy and Minerals, 21 (4) pp. 326-330
2014	Enhancement of magnetic properties of Malaysian iron ore by reduction roasting using oil palm empty fruit bunch. ISIJ International, 54 (4) pp. 994-996
2014	Reduction of low grade iron ore pellet using palm kernel shell. Renewable Energy, 63 () pp. 617-623
2013	Carbon deposition using various solid fuels for ironmaking applications. Energy & Fuels, 27 (5) pp. 2687-2692
2013	Carbon doped iron ore using palm kernel shell. Advanced Materials Research, 701 () pp. 28-31
2013	Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil. International Journal of Materials, Mechanics and Manufacturing, 1 (1) pp. 46-49
2013	Magnetization of low grade iron ore using empty fruit bunch ash. Advanced Materials Research, 701 () pp. 141-144
2013	Reduction of iron ore/empty fruit bunch char briquette composite. ISIJ International, 53 (10) pp. 1749-1755
2012	Carbon deposition from biotar by fast pyrolysis using the chemical vInfiltration process within porous low-grade iron ore for iron-making. Energy & Fuels, 26 (12) pp. 7340-7346
2012	Effect of adding Ag on tensile and microstructure properties of zinc alloy. International Journal of Engineering and Technology, 12 (3) pp. 78-84
2012	Effect of holding time on the corrosion potential of SS304. Advanced Materials Research, 576 () pp. 382-385
2012	Effect of Sn addition on mechanical properties of zinc-based alloy. Advanced Materials Research, 576 () pp. 378-381
2012	Reduction of briquette composite made of low grade from ore and biomass ash. SEAISI Quarterly Journal, 41 (4) pp. 12-16
2011	Phase formation during reduction of iron sand with soda ash flux addition. Advanced Materials Research, 264-5 () pp. 801-806
2010	Exergy analysis of methane steam reformer utilizing steelmaking waste heat. ISIJ International, 50 (9) pp. 1311-1318
2010	Pre-reduced iron produced from low grade ore using biomass. SEAISI Quarterly Journal, 39 (2) pp. 18-22
2010	Process analysis of the effective utilization of molten slag heat by direct blast furnace cement production system. ISIJ International, 50 (9) pp. 1319-1325
2009	Biotar ironmaking using wooden biomass and nanoporous iron ore. Energy & Fuels, 23 (2) pp. 1128-1131
2009	The effect of magnetization on the leached limonitic ore. Indonesian Mining Journal, 12 (2) pp. 90-95

Conference or Workshop Item

2020	Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020,
2019	Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018),
2019	Mechanism of carbon deposition within char derived from oil palm empty fruit bunch. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018,
2018	Characteristics of iron ore sinter with EFB addition. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018,
2018	Effect of EFB content on reducibility of low grade iron ore composite at 1000oC – 1200oC. In: International Conference on Advances in Manufacturing and Materials Engineering 2017,
2018	Effect of EFB content on reducibility of low grade iron ore composite at 1000°C - 1200°C. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018	Effect of temperature on porosity of iron ore sinter with biochar derived from EFB. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17),
2018	Phase change of iron ore reduction process using EFB as reducing agent at 900-1200°C. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018,
2018	Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI),
2016	Carbon deposition from biotar by fast pyrolysis of palm empty fruit bunch. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP),
2016	Effect of pre-treatment on the quality of carbon-infiltrated bio-char. In: 4th International Conference Biotechnology Engineering 2016,
2015	Development process for tar filtering from biomass pyrolysis. In: 5th International Conference on Energy and Sustainability 2014 ,
2015	Effect of electron beam irradiation on the morphology of alumina ceramic. In: International Conference in Advances in Manufacturing And Materials Engineering ,
2015	Synthetic of pure alumina from aluminum scrap . In: International Conference in Advances in Manufacturing And Materials Engineering,
2014	Enhancement magnetic properties of Malaysian iron ore by biomass treatment. In: Workshop on Energy Conversion Materials 2014,
2014	Utilization of palm oil biomass for treatment of low grade Malaysian iron ore. In: Innovation of Ironmaking Technologies and Future International Collaboration : To Overcome Energy & Resource Restrictions in Accordance with Environments,
2011	Acoustical and thermal properties of lightweight coir fiber reinforced cements composites. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011,
2011	Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011),
2011	Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011),
2011	Production of fine alumina from waste aluminum can. In: International Renewable Energy & Environment Conference (IREEC 2011),
2011	Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science,
2011	Treatment of iron ore using biomass waste for ironmaking. In: International Renewable Energy & Environment Conference (IREEC 2011),
2011	Zero emission processing of waste aluminium foil. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011,

Book

2021	Advanced processing of Lateritic ore. BOOK PUBLISHER INTERNATIONAL, ISBN: 978-93-91473-07-5
2011	Introduction to probability safety assessment of nuclear power plant. IIUM Press, ISBN: 9789674180546

Book Section

2021	Phase change of low grade iron ore during sintering and reduction with oil palm empty fruit bunch. In: Book Publisher International, ISBN: 978-93-90768-14-1, pp. 23-33
2011	Development of thermoselect process in waste management system in Malaysia. In: IIUM Press, ISBN: 9789674181659, pp. 119-124
2011	Effect of stabilizer addition on crystal formation of zirconia synthesized from zircon sand. In: IIUM Press, ISBN: 978-967-418-164-2, pp. 20-26
2011	Kinetic study of reduction roasting of mixed laterite ore and coal. In: IIUM Press, ISBN: 9789674181642, pp. 70-74
2011	Malaysian coir fibre for acoustical absorption cement composite panel . In: IIUM Press, ISBN: 9789674180218, pp. 39-48
2011	Preparation of rice husk for raw material of silicon. In: IIUM Press, ISBN: 9789674181673, pp. 203-206
2011	Upgrading of iron sand by magnetic concentration and reduction. In: IIUM Press, ISBN: 9789674181642, pp. 7-15
2011	Upgrading of iron-rich laterite ore using reverse flotation. In: IIUM Press, ISBN: 9789674181642, pp. 27-33
2011	Upgrading of laterite ore by reduction and learning. In: IIUM Press, ISBN: 9789674181642, pp. 1-6