2022 |
High purity nano-silica from rice husk ash (RHA) via chemical methodas additive/stabilizing agent for CO2 capture application.
Key Engineering Materials,
908
()
pp. 373-378
|
2022 |
Porous NiTi shape memory alloy fabricated via powder metallurgy technique using pore forming agent.
Key Engineering Materials,
908
()
pp. 119-124
|
2022 |
Prediction and optimization on tribological behaviour of kenaf/carbon fiber reinforced epoxy matrix hybrid composites.
Key Engineering Materials,
908
()
pp. 3-8
|
2021 |
Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture.
IIUM Engineering Journal,
22
(1)
pp.
|
2021 |
Preparation of CaO-SiO2 adsorbent for potential CO2 capture via dry mixing method.
Materials Science Forum,
1025
()
pp. 343-348
|
2020 |
A comparative study on mechanical properties of carbon and Kenaf composites via vacuum infusion technique.
Journal of Engineering Science,
16
(1)
pp. 97-107
|
2020 |
Characterization of NiTi shape memory alloy sintered at different
temperatures in reducing environment.
Materials Science Forum,
1010
()
pp. 632-637
|
2020 |
The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture.
IIUM Engineering Journal,
22
(1)
pp. 234-244
|
2018 |
Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method.
International Journal of Current Science, Engineering & Technology,
Special issue
()
pp. 63-67
|
2018 |
Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method.
International Journal of Current Science, Engineering & Technology,
1
(Special Issue 1)
pp. 378-383
|
2017 |
Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method.
Journal of Advanced Research in Applied Sciences and Engineering Technology,
7
(Issue 1)
pp. 19-24
|
2017 |
Physiochemical characterization of Sn-Zn coatings electrodeposited from an acidic chloride bath in the absence of complexing agent.
International Journal of Current Science, Engineering & Technology, Original Research Article | Open Access | AMCT 2017 Malaysia | Special Issue,
Special issue
()
pp. 493-498
|
2017 |
Synthesis and characterization of silica ceramic membranes via sol-dip coating.
Journal of Advanced Research in Materials Science,
39
(1)
pp. 1-7
|
2016 |
Ca(OH)2 nano-pods: investigation on the effect of solvent ratio on morphology and CO2 adsorption capacity.
RSC Advances,
6
(42)
pp. 36031-36038
|
2015 |
Improved CO2 adsorption capacity and cyclic stability of CaO sorbents incorporated with MgO.
New Journal of Chemistry,
40
(1)
pp. 231-237
|
2014 |
Carbon dioxide capture at various temperatures using Ca(OH)2
sorbent fabricated by sol-gel route in ethanol media.
Advanced Materials Research,
1024
()
pp. 35-38
|
2014 |
Development of Ca(OH)2nanosorbent for intermediate-high temperature
CO2 capture via wet chemical route in N,N-Dimethylformamide solvent
.
Advanced Materials Research ,
911
()
pp. 410-414
|
2013 |
Fabrication of Ca(OH)2 nanostructures by facile solution – based
synthesis at various reaction temperatures as CO2 adsorbent.
Materials Science Forum,
756
()
pp. 175-181
|
2011 |
Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application.
Malaysian Journal of Microscopy,
7
()
pp. 161-169
|
2023 |
Enhancement of fenton process using high entropy alloy powder as catalyst.
In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
|
2021 |
Development of High Entropy Alloy (HEA) as
catalyst for Azo dye degradation in Fenton
process.
In: 1st International Conference on Material Processing and Technology (ICMProTech 2021),
|
2021 |
Synthesis and characterization of nanoporous
biphasic calcium phosphate.
In: International Conference on Biomedical Engineering (ICoBE 2021),
|
2021 |
Synthesis methods of doped hydroxyapatite: a
brief review.
In: International Conference on Biomedical Engineering (ICoBE 2021),
|
2020 |
Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment.
In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
|
2020 |
Preparation of nanosilica powder using rice husk via precipitation method.
In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
|
2019 |
Effect of acceptor impurity (Cu and Al) in
Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method.
In: Materials characterization using x-rays and related techniques,
|
2019 |
Preparation of nano-silica powder from silica sand via sol-precipitation method.
In: "International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018",
|
2018 |
Electrodeposition of zinc antimony alloy thermoelectric materials.
In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017",
|
2018 |
Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount.
In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
|
2016 |
CTAB-assisted precipitation synthesis of Ca(OH)2 sorbent for CO2 captures.
In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015,
|
2016 |
Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application.
In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
|
2010 |
Synthesis of TiO2 nanosized powder photocatalyst via soft-gel method for bacteria inactivation application.
In: 19th Scientific Conference of Electron Microscopy Society of Malaysia (EMSM),
|