Staff Directory


Norshahida Binti Sarifuddin

Academic Qualification

  • BIOPOLIMER ENGINEERING - Doctor of Philosophy, Universiti Sains Malaysia (USM)
  • Engineering (Material Science) - Masters Degree, International Islamic University Malaysia
  • Engineering (Material Science) - Bachelor Degree, International Islamic University Malaysia
  • Engineering (Matriculation) - Certificate, International Islamic University Malaysia

Norshahida Binti Sarifuddin (Dr.)

Assistant Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


norshahida@iium.edu.my
6540


Area of Specialisation


  • Advanced Experimental And Applied Science ~ Applied Sciences, Engineering And Technologies ~ Engineering Science and Technology - BIOPOLIMER ENGINEERING


Teaching Responsibilities


Contemporary Materials for Engineering Applications 2021/2022
FINAL YEAR PROJECT I 2021/2022 2019/2020 2018/2019
FINAL YEAR PROJECT II 2022/2023 2019/2020
HIGH PERFORMANCE POLYMERIC MATERAILS 2019/2020
Integrated Design Project 2018/2019
MATERIALS ENGINEERING LAB 2 2022/2023 2021/2022
MATERIALS ENGINEERING LAB II 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018
MATERIALS ENGINEERING LAB III 2016/2017 2015/2016
MATERIALS LABORATORY I 2015/2016
MATERIALS PROCESSING TECHNOLOGY 2022/2023
MATERIALS SCIENCE AND ENGINEERING 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016
POLYMER PHYSICS 2020/2021 2017/2018
POLYMER PROCESSING 2021/2022 2019/2020 2018/2019
PROJECT I 2018/2019 2017/2018 2016/2017
SURFAACE ENGINEERING AND TRIBOLOGY 2022/2023
Surface Engineering and Tribology 2021/2022 2020/2021 2019/2020 2018/2019


Research Projects


Completed
2019 - 2022 Conversion of Agrowaste into Electricity via Microbial Electrochemical System
2018 - 2021 Synthesis of hybrid nanosorbent calcium oxide incorporated with magnesium oxide-silica for enhancement CO2 capture performance and cyclic stability
2017 - 2020 Study On The Effect Of Cloisite 30B On The Antimicrobial Activities And Tissue Regeneration Of Starch Based Wound Healing Materials
2017 - 2020 Tribological Properties of Hybrid Composites based on Woven Carbon Fiber/Fine Kenaf Fabric Reinforced Epoxy Matrix for Automative Applications
2016 - 2020 The Study of Tropical Fruit Seeds as New Sources of Starch Based Biopolymers for Green Composites Applications
2016 - 2019 Solid State Synthesis on NiTi Shape Memory Alloy in Reducing Environment
On-Going
2022 - Present Filtration Mechanism of Bioactive High Amylose Mangifera Indica Starch/Polycaprolactone Electrospun Nanofibers for Biodegradable Facemask
2022 - Present Belajar dan berinovasi bersama konsep 3C (Cakna, Cipta dan Cartakan) untuk pembangunan kelestarian Setempat (Gombak Utara)
2021 - Present Hybrid eSiC-graphene oxide coating mechanism on Ti-alloy to enhance properties using an additive manufacturing method
2021 - Present Self Healing Mechanism of Nitinol (Ni60Ti40) Enhanced Zirconia Toughened Alumina (ZTA) Ceramic Cutting Tools for High-Speed Machining
2021 - Present Medical Grade Product from Clay for Cleansing of Wound and Surgical Instruments in the SERTU Procedures
2020 - Present Reliability Evaluation of the ZTA Doped Nano TiO2 and Cr2O3 Ceramic Cutting Tools for High Speed Turning Process of Metal
2019 - Present Regeneration behaviour of nanosilica with concrete waste via natural self-healing route for capturing CO2
2019 - Present Surface Passivation of Porous NiTi Shape Memory Alloy via Thermal Oxidation for Bone Implant Application
2009 - Present Advanced Materials and Surface Engineering (AMSERU)


Publications


Article

2022 A review on antimicrobial packaging from biodegradable polymer composites. Polymers, 14 (1) pp. 1-29
2022 Biodegradation of mango seed starch films in soil. IIUM Engineering Journal, 23 (1) pp. 258-267
2022 High purity nano-silica from rice husk ash (RHA) via chemical methodas additive/stabilizing agent for CO2 capture application. Key Engineering Materials, 908 () pp. 373-378
2022 Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing. Polimery, 67 (6) pp. 249-254
2022 Porous NiTi shape memory alloy fabricated via powder metallurgy technique using pore forming agent. Key Engineering Materials, 908 () pp. 119-124
2022 Prediction and optimization on tribological behaviour of kenaf/carbon fiber reinforced epoxy matrix hybrid composites. Key Engineering Materials, 908 () pp. 3-8
2021 Mechanisms for doped PEDOT:PSS electrical conductivity improvement. Materials Advances, 2 (22) pp. 7118-7138
2021 Modeling humanizing education through newly reviewed materials engineering curriculum. IIUM Journal of Education Studies, 9 (3) pp. 63-79
2021 Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1) pp.
2021 Preparation of CaO-SiO2 adsorbent for potential CO2 capture via dry mixing method. Materials Science Forum, 1025 () pp. 343-348
2020 A comparative study on mechanical properties of carbon and Kenaf composites via vacuum infusion technique. Journal of Engineering Science, 16 (1) pp. 97-107
2020 A review on kenaf fiber hybrid composites: mechanical properties, potentials, and challenges in engineering applications. Progress in Rubber, Plastics and Recycling Technology, Early Access () pp. 1-18
2020 Characterization of NiTi shape memory alloy sintered at different temperatures in reducing environment. Materials Science Forum, 1010 () pp. 632-637
2020 Reprocessing of polypropylene/cellulose composites: effects on thermal properties. Test Engineering and Management, 83 () pp. 25906-259009
2020 The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1) pp. 234-244
2019 Mechanical properties of woven carbon fiber/kenaf fabric reinforced epoxy matrix hybrid composites. MALAYSIAN JOURNAL OF MICROSCOPY, 15 (1) pp. 10-16
2019 Study the effects of an addition of titanium dioxide (TiO2) on the mechanical and thermal properties of polypropylene-rice husk green composites. Materials Research Express, 6 (7) pp.
2018 Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering. International Journal of Current Science, Engineering & Technology, 1 (special issue 1) pp. 464-470
2018 Effect of banana peel fiber as reinforcement in low density polyethylene/durian seed starch blends. International Journal of Current Research in Science & Technology, Special issue () pp. 191-196
2018 Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8) pp. 2930-2934
2018 The effects of glycerol addition to the mechanical properties of thermoplastic films based on jackfruit seed starch [Kesan penambahan gliserol pada sifat mekanik filem thermoplastik berdasarkan kanji biji nangka]. Malaysian Journal of Analytical Sciences, 22 (5) pp. 892-898
2017 Structural, thermal and physico‑chemical properties of high density polyethylene/natural rubber/modified cassava starch blends. Iranian Polymer Journal, 26 (2) pp. 149-159
2014 Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology, 8 (3) pp. 792-796
2014 Effect of kenaf fibre on starch based biopolymer composite. Advances in Environmental Biology, 8 (3) pp. 765-769
2014 Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals, 603 (1) pp. 180-193
2014 Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering, 53 () pp. 107-113
2014 Preparation and characterization of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites and their hybrid composites with halloysite clay. Advances in Environmental Biology, 8 (3) pp. 704-711
2014 Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals, 603 (1) pp. 173-179
2013 Comparative study on the effect of bentonite or feldspar filled low-density polyethylene/thermoplastic sago starch/kenaf core fiber composites. BioResources, 8 (3) pp. 4238-4257
Conference or Workshop Item

2022 Recent advances in hybrid coating on metallic materials using liquid additive manufacturing. In: International Conference on Mechanical Engineering (ICME 2022),
2020 Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
2020 Effect of stacking sequences on mechanical properties of kenaf hybrid composites. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019),
2020 Estimating suitable starch extraction from mango seeds using analytical hierarchy process (AHP) method. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019),
2020 Preparation of nanosilica powder using rice husk via precipitation method. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
2020 Tensile and flexural properties of woven carbon-kenaf fiber reinforced epoxy matrix hybrid composite: effect of hybridization and stacking sequences. In: 3rd International Postgraduate Conference on Materials, Minerals and Polymer (MAMIP 2019),
2019 Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018,
2018 Effect of different reducing agents on phase formation and transformation behaviour of Ni-Ti shape memory alloy. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2018 Effect of oregano essential on the properties of mango kernel starch films. In: International Conference on Advanced Manufacturing and Industry Applications, ICAMIA 2018,
2018 Extraction and characterization of starch from mango seeds. In: Regional Conference on Materials and ASEAN Microscopy Conference 2017, RCM and AMC 2017,
2018 Preparation and characterization of jackfruit seed starch/poly (vinyl alcohol) (PVA) blend film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2017 Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016,
Book

2018 International Journal of Current Research in Science & Technology. UR Publishers, ISBN: 2581-4311 (ISSN)
Book Section

2020 Two-step synthesis of ca-based MgO hybrid adsorbent for pontential CO2 capturing application. In: Trans Tech Publications Ltd, ISBN: 978-303571664-1, pp. 369-374
2016 Studies of polyethylene-based biocomposites, bionanocomposites and other non-biobased nanocomposites. In: Wiley-Scrivener, John Wiley & Sons, Inc., ISBN: 9781119038450, pp. 315-344
2015 Applications of kenaf-lignocellulosic fiber in polymer blends. In: John Wiley & Sons, Inc., ISBN: 978-1-118-77357-4, pp. 499-521
Monograph

2020 TRIBOLOGICAL PROPERTIES OF HYBRID COMPOSITES BASED ON WOVEN CARBON FIBER/FINE KENAF FABRIC REINFORCED EPOXY MATRIX FOR AUTOMOTIVE APPLICATION. In: ,