IIUM: Staff Directory

Staff Directory

Academic Qualification

Doctor of Philosophy (Mechanical Engineering) - Doctor of Philosophy, University of Leeds
Master of Science (Tribology) - Masters Degree, University of Leeds
Bachelor of Science (Mechanical Engineering) - Bachelor Degree, University of Leeds

Masjuki Bin Haji Hassan (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING

masjuki@iium.edu.my

4589

Expert Profile

Ir. Dr. Masjuki Hj. Hassan was conferred Fellow of Academy of Sciences Malaysia in 2019, Fellow of MYTRIBOS in January 2020 and Emeritus Professorship on 20th October 2018 in conjunction with the 58th University of Malaya Convocation. He was a '2017-Merdeka Award winner in the Outstanding Scholastic Achievement Category' and listed as '2017, 2018 and 2019 - Highly Cited Researchers by Clarivate Analytics'. He obtained his B.Sc.(Hons), Mech Eng from Leeds University, U.K. in 1977. This was followed by his M.Sc. in Tribology and Ph.D. in Super Laminar Flow in Journal Bearing from the same university in 1978 and 1982 respectively. On completion of his PhD, he was appointed as Assistant Professor in 1983 at University of Malaya. He is a Senior Professor in Mechanical Engineering Department, University of Malaya and was a Visiting Professor at King Saud University (KSU), Riyadh, Saudi Arabia from 2017 to 2018. Administratively, he was appointed as Acting Dean, Deputy Dean, and Head of Mechanical Engineering Department on several occasions. He also sat on many committees at International, National (Ministries), and University levels. He served as Senate Member of University of Malaya on several occasions and was Secretary of Council of National Professors -under Engineering, Technology and Built Environment Cluster until 31st March 2016. He was Chairman of Council of National Professors - University of Malaya Chapter from 1st June 2016 to 31st May 2018. He was the founding President of Malaysian Tribology Society (MYTRIBOS) from 2007 to 2017. He is one of the Vice - Presidents of International Tribology Council (ITC), UK. He was the Head of the Centre for Energy Sciences and Research Fellow at Center of Malay Excellence Study, University of Malaya. He received many other awards for his outstanding academic achievements and also member of many International and National professional organizations. He collaborated and is still collaborating with many international research organizations such as United State Agency for International Aid Agency (USAID), Asean-Australian Energy Conservation Program (AAECP), ASIAN Development Bank (ADB), ASIA-EU Grant, Japanese Society for the Promotion of Science (JSPS) and AUN-Seed Net Program and Universities. He has successfully supervised many local and foreign Master (65) and PhD (37) students. He has published more than 500 journal articles, received more than 20,000 citations and h index of 81. His major contribution to the nation is through his expertise in biodiesel fuel production and automotive engineering have been much sought for to strengthen Malaysian Government Policy to blend various percentages of biodiesel from palm oil with fossil diesel to be sold at petrol pumps throughout Malaysia. His other contribution to the nation is his involvement in more than 6 Technical Committees at SIRIM developing various Malaysian Standards for various Malaysian manufacturing industries. He reviewed and still being invited to review many journal articles by renown publishers and editorial members of many international and national journals. He is a CEng(UK), MSAE(USA), PEng/Ir(Malaysia) and FIMechE(UK). He retired from University of Malaya in 12 April 2019 and on 01 July 2019 he joined Department of Mechanical Engineering, Faculty of Engineering, International Islamic University Malaysia(IIUM), Gombak Campus, Kuala Lumpur Malaysia.

PROFESSIONAL
(Organisation), (Role), (Year), (Level).

Fellow MYTRIBOS, Member, 2020, International.
Fellow Academy Sciences Malaysia (FASc), Member, 2019, International.
Fellow IMechE, CEng, Member, 2015, International.
The Institution of Mechanical Engineers (I.Mech.E.) London, U.K., Associate Member, 1977, (International)
Islamic Academy of Science of Malaysia, Member, 1983, (National)
National Point of Contact Representative (NPCR) , Member, 1986 to 2007, (National)
STLE ( Society of Tribologists and Lubrication Engineers ) USA, Member, 1990 to 2003, (International)
Institute of Energy Malaysia, Executive Committee Member, 1991, (National)
SAE International, Member, 1991, (International)
National Point of Contact Representative (NPCR) , Member, 1998, (National)
National Point of Contact Representative (NPCR) " for Regional Network for Industrial Development in Southeast Asia and the Pacific, UNESCO Malaysia, Member, 1998, (National)
SAE USA, Member, 1999, (International)
BSME-ASME Int. Conf. on Thermal on Thermal Engineering , BUET, Bangladesh, Member, 2001 to 2002, (International)
Centre of Research in Energy Sciences, University of Malaya, Director, 2002, (International)
Centre of Research in Energy Sciences, University of Malaya, Board Member, 2002, (National)
End Use Sub Work Group on Refrigerators (SWG-F) Committee, Energy Commission of Malaysia, Chairman, 2003 to 2007, (National)
Working Group on Industrial V Belt Committee, SIRIM, Chairman, 2003 to 2006, (National)
Int. J. of Eng. Sc. & Tech., Fac. of Eng., University of Malaya, Board Member, 2003, (National)
JOURNAL MEKANICAL, UNIVERSITI TEKNOLOGI MALAYSIA, Advisor, 2005 to 2012, (International)
PUSAT TENAGA MALAYSIA (PTM) / (NATIONAL ENERGY CENTRE), Member, 2005, (National)
ASIAN TRIBOLOGY SOCIETY, Council Member, 2006, (International)
Int. Conf. in Renewable Energy and Environment, WREEC2006, Tripoli Libya, Member Of The International Committee, 2006 to 2006, (National)
Mechanical Engineering Component Technical Committee (TC), SIRIM BHD, Member, 2006, (National)
IJAME, University Malaysia Pahang, Editorial Board, 2008, (National)
ASHRAE, Member, 2008 to 2009, (International)
Malaysian Tribology Society (based in UM), Membership, 2008, (International)
Engineering e-journal UM, Chief Editor, 2009, (National)
MALAYSIAN PROFESSOR COUNCIL (SECRETARY OF ENGINEERING, TECHNOLOGY AND BUILT ENVIRONMENT CLUSTER), Secretary, 2010 to 2016, (National)
Malaysian Society for Engineering and Technology, Active Member, 2011, (National)
Malaysian Green Technology Corporation (GreenTech Malaysia), Active Member, 2012, (National)
INSTITUTION OF MECHANICAL ENGINEERS, LONDON, UK. (FIMECHE), Fellow, 2013, (International)
ENGINEERING COUNCIL UK (CENG), Charted Engineer, 2013, (International)
JICA AUN/SEED-Net (Editorial Board Member- ASEAN Engineering Journal), Editorial Board Member, 2013, (International)
Society of Automotive Engineers (SAE), Member, 2013 to 2017, (International)
MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS), President, 2013 to 2017, (International)
ASM TASK FORCE ON CARBON FREE ENERGY, Committee Member, 2014, (National)
King Saud University, Riyadh, Saudi Arabia, Visiting Research Professor, 2015 to 2016, (International)
International Tribology Council, Vice-president, 2016 to 2018, (International)
The National Council Of Professors- University Of Malaya Chapter, Chairman, 2016 to 2017, (National)
Board of Engineers Malaysia (PEng/Ir, Reg. No. 17696), Professional Engineer, 2016, (International)
Ahli Panel Cendikiawan Majlis Dakwah Negara, Panel, 2016 to 2018, (National)
KING SAUD UNIVERSITY, Visiting Research Professor, 2017 to 2018, (International)
Ahli Jawatankuasa Kesepakaran, Universiti Kebangsaan Malaysia, Committee Member, 2018 to 2019, (University)
International Steering Committee in International Conference on Sustainable Energy and Green Technology, Committee Member, 2018 to 2018, (International)

ADMINISTRATIVE DUTIES
(Role), (Level), (Start date),(End Date).

Head of Unit, Centre for Energy Sciences (Ces), Faculty of Engineering, 01/01/2019 to 12/04/2019

Head of Department, Department of Mechanical Engineering, Faculty of Engineering, 01/08/2015 to 31/07/2016

Head of Unit, Centre for Energy Sciences (Ces), Faculty of Engineering, 01/01/2015 to 31/12/2015

Head of Department, Department of Mechanical Engineering, Faculty of Engineering, 01/08/2014 to 31/07/2015

Head of Unit, Centre for Energy Sciences (Ces), Faculty of Engineering, 02/01/2014 to 31/12/2014

Deputy Dean, Dean's Office, Faculty of Engineering, 02/02/2011 to 30/06/2011

Deputy Dean, Dean's Office, Faculty of Engineering, 01/09/2009 to 30/06/2011

Head of Department, Department of Mechanical Engineering, Faculty of Engineering, 01/09/2008 to 31/08/2009

Head of Department, Department of Mechanical Engineering, Faculty of Engineering, 01/09/2007 to 31/08/2008

Spokesman and Technical Committee Panel for National Biodiesel Program, UM-MPOB, University Malaya, 01/11/2016 to 01/11/2017 (one year)

Associate Research Fellow of University of Malaya Research Centre for Malaya Excellence Study, University Malaya, 07/09/2016 to 06/09/2018 (Two years)

Special Committee Member of Mechanical Engineering Department, Faculty of Engineering, University Malaya, 01/09/2016 to 01/09/2017 (for one year)

Speaker during Orientation Week at Faculty of Engineering, University Malaya, 01/09/2016 to 01/09/2016 (For orientation week)

Committee member for Royal Education Award (APD), University Malaya, 10/08/2016 to 11/08/2016 (For APD)

Committee Member for Undergraduate Studies Professor Representative at Faculty of Engineering, University Malaya, 01/08/2016 to 01/08/2017 (for Undergraduate Studies)

Committee Member of Income Generation and Savings under PTj, University Malaya, 20/04/2016 to 20/04/2016 (one year)

Attended National Transformation Program, Faculty of Engineering, University Malaya, 18/02/2016 to 18/02/2016 (Attended National Transformation Program)

Technical Committee Member for SEnergy@UM Program, University Malaya, 03/02/2016 to 03/02/2016 (UM Program)

Head, Centre for Energy Sciences , University Malaya, 01/01/2016 to 31/12/2016

Chairman, University Malaya, 02/11/2015 to 01/11/2016 (Chairman MPN University of Malaya Chapter)

Member of the ASM Task Force on Carbon Free Energy, National, 02/05/2014 to 30/04/2015 (Academy of Sciences Malaysia, MOSTI)

Secretary, Malaysia Professor's Council: Engineering, Technology and Built Environment Cluster, National, 01/04/2013 to 31/03/2016

Head, Centre for Energy Sciences, University Malaya, 02/01/2013 to 31/12/2014

Coordinator for Boiler Lab, Faculty, 27/07/2012 to 26/07/2015 (Coordinator for Boiler Lab.)

Deputy Dean of Higher Degree, Faculty, 01/09/2009 to 30/06/2011

Member, Advanced Engineering & Technology Research Cluster Panel , University Malaya, 01/01/2009 to 31/12/2010

Head of Department of Mechanical Engineering, Faculty, 01/09/2007 to 31/08/2009

Quality Manager, University Malaya, 21/04/2003 to 01/11/2005 (Faculty of Engineering)

Senate Member, University Malaya, 03/04/2003 to 20/10/2009

Director
Energy Sciences Research Centre, University Malaya, 01/01/2002

Deputy Dean of Development, Faculty, 02/03/2001 to 31/07/2005 (Deputy Dean Development)

Member, Laboratory Technology Training(JLTM)Committee, University Malaya, 01/10/1994 to 30/09/2000

Senate Member , University Malaya, 01/10/1994 to 31/12/1997

Head of Department of Mechanical Engineering, University Malaya, 01/10/1994 to 30/09/2000

Senate Member , University Malaya, 01/11/1987 to 30/09/1988

Senate Member , University Malaya, 22/07/1987 to 31/08/1987

AREAS OF EXPERTISE
(Area).

Corrosion Science and Engineering (Tribology, Lubricant, Lube-oil Based Condition Monitoring, Tribo-corrosion, Material Corrosion)

Combustion and Fuel Engineering (Automobile Engine Performance and Emission Monitoring, Energy Efficiency , Biofuels, Alternative Energy resources, Life cycle analysis)

Exergy, Renewable and Sustainable Energy, Refrigerants, Bio-Materials,Tqm (Automotive and Industrial Exergy Analysis, Energy Sustainablity, Thermal System Management with Refrigerants, Tribological Application with Bio-materials, TQM in Industrial Process Management )

Automotive Fuels (Gasoline, Diesel, Bioethanol, Biodiesel, Hydrogen)

RECENT SELECTED PUBLICATIONS
(Publication).

2007

Mahlia, T.M.I., B.N. Taufiq, Ismail, Masjuki, H.H., Correlation between thermal conductivity and the thickness of selected insulation materials for building wall, Int. Journal of Energy and Building, Elsevier Science UK vol. 39, Issue 2, February 2007, pp. 182-187.

Book

2015

Masjuki, H. (2015). Handbook of Plain Bearings: Buku Panduan Galas Datar: Penerbit Universiti Malaya.

2010

Masjuki H.H. 2010. Biofuel Engine: A New Challenge. International & Corporate relations Office (ICR). University of Malaya, Kuala Lumpur, Malaysia. ISBN (978-967-5148-65-1), pp.1-56.

2007

M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, Palm Oil Diesel Production and Its Experimental Test on a Diesel Engine, Book chapter by The Haworth Press, Inc. Binghamton, NY 13904-1580 USA, www.haworthpressinc.com. (Oct./November), 2007.

2004

Kalam, M.A., H.H. Masjuki, M.A. Maleque, M.A. Amalina, H. Abdesselam and T.M.I. Mahlia, in General Emissions 2004, SP-1863, Air-Fuel ratio calculation for a natural gas fuelled spark ignition engine SAE International, ISBN:0-7680-1399 - 2/SAE2004-01-0640, pp.183-190

Chapter in Book

2016

M. Mofijur, M.G. Rasul, N.M.S. Hassan, H.H. Masjuki, M.A. Kalam, H.M. Mahmudul, 2016. "Assessment of Physical, Chemical, and Tribological Properties of Different Biodiesel Fuels". Ch: 14, pp. 441-461.CLEAN ENERGY FOR SUSTAINABLE DEVELOPMENT 1st Edition, Elsevier, ISBN 978-0-12-805423-9, eBook ISBN: 9780128054246

2013

M. Shahabuddin, H.H. Masjuki and M.A. Kalam, 2013. Development of Eco-Friendly Biodegradable Biolubricant Based on Jatropha Oil,Ch: 8, pp. 1-12.Tribology in Engineering, Ed. Ha�im Pihtili,InTech, ISBN 978-953-51- 1126-9

2012

RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: ZENG, D. (ed.), Energy Procedia:493- 498, 2011 2nd International Conference on Advances in Energy Engineering.
SHAFIE, S. M., MAHLIA, T. M. I., MASJUKI, H. H. & RISMANCHI, B. 2012. Life cycle assessment (LCA) of electricity generation from rice husk in Malaysia. In: ZENG, D. (ed.), Energy Procedia, 14:499-504, 2011 2nd International Conference on Advances in Energy Engineering.

2011

Kalam, M.A. and Masjuki, H.H. 2011. Experimental Test of a Diesel Engine using Envo-Diesel as an Alternative Fuel, New Trends and Developments in Automotive System Engineering, ISBN 978-953-307-517-4, published by INTECH

2008

M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, 2008,Palm Oil Diesel Production and Its Experimental Test on a Diesel Engine, Handbook of Plant-Based Biofuels, Ed. Ashok Pandey, CRC Press (Taylor & Francis) New York, pp. 225-240

Article in Academic Journals

2018

Zainal, N. A., Zulkifli, N. W. M., Gulzar, M., & Masjuki, H. H. (2018). A review on the chemistry, production, and technological potential of bio-based lubricants. Renewable and Sustainable Energy Reviews, 82, 80-102. (ISI-Indexed)
Reddy, A. N. R., Saleh, A. A., Islam, M. S., Hamdan, S., Rahman, M. R., & Masjuki, H. H. (2018). Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties. Journal of Renewable and Sustainable Energy, 10(1), 013103. (ISI-Indexed)
Mazaheri, H., Ong, H. C., Masjuki, H. H., Amini, Z., Harrison, M. D., Wang, C. T., ... & Alwi, A. (2018). Rice bran oil based biodiesel production using calcium oxide catalyst derived from Chicoreus brunneus shell. Energy, 144, 10-19. (ISI-Indexed)
How, H. G., Masjuki, H. H., Kalam, M. A., & Teoh, Y. H. (2018). Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel, 213, 106-114. (ISI-Indexed)
Milano, J., Ong, H. C., Masjuki, H. H., Silitonga, A. S., Chen, W. H., Kusumo, F., ... & Sebayang, A. H. (2018). Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology. Energy Conversion and Management, 158, 400-415. (ISI-Indexed)

2017

M.N.A.M. Yusoff, N.W.M. Zulkifli, H.H. Masjuki, M.H. Harith, A.Z. Syahir, M.A. Kalam, M.F. Mansor, A. Azham, L.S. Khuong, Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends, In Transportation Research Part D: Transport and Environment, Volume 57, 2017, Pages 23-38, ISSN 1361-9209 (ISI-Indexed)
Nang Khin Chaw Sint, I.A. Choudhury, H.H. Masjuki, H. Aoyama, Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar, Solar Energy, 155 (2017), 608–619 (ISI-Indexed)
H.H. Mardhiah, H.C. Ong, H.H. Masjuki, S. Lim, H.V. Lee, A review on latest developments and future prospects of heterogeneous catalyst in biodiesel production from non-edible oils, Renewable and Sustainable Energy Reviews, 67 (2017) 1225-1236. (ISI-Indexed)
A.Z. Syahir, N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, Abdullah Alabdulkarem, M. Gulzar, L.S. Khuong, M.H. Harith, A review on bio-based lubricants and their applications, In Journal of Cleaner Production, Volume 168, 2017, Pages 997-1016, ISSN (ISI-Indexed)
Monirul, I. M., Kalam, M. A., Masjuki, H. H., Zulkifli, N. W. M., Shahir, S. A., Mosarof, M. H., & Ruhul, A. M. (2017). Influence of poly (methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions. Renewable Energy, 101, 702-712. (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Kamruzzaman, M., Shahin, M. M., & Rashed, M. M. (2017). Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes. Journal of Cleaner Production, 141, 928-939. (ISI-Indexed)
Monirul, IM; Masjuki, HH; Kalam, MA; Zulkifli, NWM; Shancita, I 2017. Influence of polymethyl acrylate additive on the formation of particulate matter and NOX emission of a biodiesel-diesel-fueled engine. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (ISI-Indexed)
Abdul Mannan, Mohd Faizul Mohd Sabri, Md. Abul Kalam, Masjuki Hj. Hassan, (2017), "Tribological properties of hydrogen free DLC in self-mated contacts against ZDDP-added Oil", Industrial Lubrication and Tribology, https://doi.org/10.1108/ILT-11-2016-0269 (ISI-Indexed)
Mardhiah, HH; Ong, HC; Masjuki, HH; Lim, S; Pang, YL 2017. Investigation of carbon-based solid acid catalyst from Jatropha curcas biomass in biodiesel production. ENERGY CONVERSION AND MANAGEMENT (ISI-Indexed)
Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties MM Quazi, MA Fazal, A Haseeb, F Yusof, HH Masjuki, A Arslan, Tribology Transactions, 2017, 60 (2), 249-259 (ISI-Indexed)
Sebayang, AH; Masjuki, HH; Ong, HC; Dharma, S; Silitonga, AS; Kusumo, F; Milano, J 2017. Optimization of bioethanol production from sorghum grains using artificial neural networks integrated with ant colony. INDUSTRIAL CROPS AND PRODUCTS (ISI-Indexed)
Kalam, MA; Masjuki, HH; Cho, HM; Mosarof, MH; Mahmud, MI; Chowdhury, MA; Zulkifli, NWM 2017. Influences of thermal stability, and lubrication performance of biodegradable oil as an engine oil for improving the efficiency of heavy duty diesel engine. FUEL (ISI-Indexed)
Imdadul, HK; Zulkifli, NWM; Masjuki, HH; Kalam, MA; Kamruzzaman, M; Rashed, MM; Rashedul, HK; Alwi, A 2017. Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (ISI-Indexed)
Imdadul, HK; Rashed, MM; Shahin, MM; Masjuki, HH; Kalam, MA; Kamruzzaman, M; Rashedul, HK 2017. Quality improvement of biodiesel blends using different promising fuel additives to reduce fuel consumption and NO emission from CI engine. ENERGY CONVERSION AND MANAGEMENT (ISI-Indexed)
Rashedul, HK; Kalam, MA; Masjuki, HH; Teoh, YH; How, HG; Monirul, IM; Imdadul, HK 2017. Attempts to minimize nitrogen oxide emission from diesel engine by using antioxidant-treated diesel-biodiesel blend. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (ISI-Indexed)
Khuong, LS; Masjuki, HH; Zulkifli, NWM; Mohamad, EN; Kalam, MA; Alabdulkarem, A; Arslan, A; Mosarof, MH; Syahir, AZ; Jamshaid, M 2017. Effect of gasoline-bioethanol blends on the properties and lubrication characteristics of commercial engine oil. RSC ADVANCES (ISI-Indexed)
Gulzar, M; Masjuki, HH; Alabdulkarem, A; Kalam, MA; Varman, M; Zulkifli, NWM; Zahid, R; Yunus, R 2017. Chemically active oil filter to develop detergent free bio-based lubrication for diesel engine. ENERGY (ISI-Indexed)
Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Shahir, S. A., Alabdulkarem, A., Teoh, Y. H., ... & Reham, S. S. (2017). Evaluating combustion, performance and emission characteristics of Millettia pinnata and Croton megalocarpus biodiesel blends in a diesel engine. Energy, 141, 2362-2376. (ISI-Indexed)
Kusumo, F., Silitonga, A. S., Masjuki, H. H., Ong, H. C., Siswantoro, J., & Mahlia, T. M. I. (2017). Optimization of transesterification process for Ceiba pentandra oil: A comparative study between kernel-based extreme learning machine and artificial neural networks. Energy, 134, 24-34. (ISI-Indexed)
Sebayang, A. H., Masjuki, H. H., Ong, H. C., Dharma, S., Silitonga, A. S., Kusumo, F., & Milano, J. (2017). Prediction of engine performance and emissions with Manihot glaziovii bioethanol− Gasoline blended using extreme learning machine. Fuel, 210, 914-921. (ISI-Indexed)
Norjannah, B., Ong, H. C., & Masjuki, H. H. (2017). Effects of methanol and enzyme pretreatment to Ceiba pentandra biodiesel production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(14), 1548-1555. (ISI-Indexed)
Monirul, IM; Kalam, MA; Masjuki, HH; Zulkifli, NWM; Shahir, SA; Mosarof, MH; Ruhul, AM 2017. Influence of poly(methyl acrylate) additive on cold flow properties of coconut biodiesel blends and exhaust gas emissions. RENEWABLE ENERGY (ISI-Indexed)
Arslan, A., Masjuki, H. H., Kalam, M. A., Varman, M., Mosarof, M. H., Mufti, R. A., ... & Alabdulkarem, A. (2017). Investigation of laser texture density and diameter on the tribological behavior of hydrogenated DLC coating with line contact configuration. Surface and Coatings Technology, 322, 31-37. (ISI-Indexed)
Kusumo, F., Silitonga, A. S., Ong, H. C., Masjuki, H. H., & Mahlia, T. M. I. (2017). A comparative study of ultrasound and infrared transesteriﬁcation of Sterculia foetida oil for biodiesel production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(13), 1339-1346. (ISI-Indexed)
Shuhimi, F. F., Abdollah, M. F. B., Kalam, M. A., Masjuki, H. H., Mustafa, A. e., Mat Kamal, S. E., & Amiruddin, H. (2017). Effect of operating parameters and chemical treatment on the tribological performance of natural fiber composites: A review. Particulate Science and Technology, 35(5), 512-524. (ISI-Indexed)
Sharudin, H., Abdullah, N. R., Najafi, G., Mamat, R., & Masjuki, H. H. (2017). Investigation of the effects of iso-butanol additives on spark ignition engine fuelled with methanol-gasoline blends. Applied Thermal Engineering, 114, 593-600. (ISI-Indexed)
Sundus, F., Masjuki, H. H., & Fazal, M. A. (2017). Analysis of Tribological Properties of Palm Biodiesel and Oxidized Biodiesel Blends. Tribology Transactions, 60(3), 530-536. (ISI-Indexed)
Silitonga, A. S., Masjuki, H. H., Ong, H. C., Mahlia, T. M. I., & Kusumo, F. (2017). Optimization of extraction of lipid from Isochrysis galbana microalgae species for biodiesel synthesis. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(11), 1167-1175. (ISI-Indexed)
Sundus, F., Fazal, M. A., & Masjuki, H. H. (2017). Effect of anti‐oxidants on the lubricity of B30 biodiesel–diesel blend. Lubrication Science, 29(1), 3-15. (ISI-Indexed)
Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Mufti, R. A., . . . Yunus, R. (2017). Dispersion Stability and Tribological Characteristics of TiO2/SiO2 Nanocomposite-Enriched Biobased Lubricant. Tribology Transactions, 60(4), 670-680. (ISI-Indexed)
Sundus, F., Fazal, M. A., & Masjuki, H. H. (2017). Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties. Renewable and Sustainable Energy Reviews, 70, 399-412. (ISI-Indexed)
MH Elsheikh, MFM Sabri, SM Said, Y Miyazaki, HH Masjuki, DAA Shnawah, S Naito, MBA Bashir, Rapid preparation of bulk Al x Yb0.25Co4Sb12 (x = 0, 0.1, 0.2, 0.3) skutterudite thermoelectric materials with high figure of merit ZT = 1.36. Journal of Materials Science, 1-9. doi: 10.1007/s10853-017-0772-8 (2017) (ISI-Indexed)
Blicharska M, Smithers RJ, Kuchler M, Agrawal GK, Gutierrez JM, Hassanali A, Huq S, Koller SH, Marjit S, Mshinda HM, Masjuki HH, Solomons NW, Staden JV, Mikusinski G (2017): Steps to overcome the North-South divide in research relevant to climate change policy and practice. Nature Clim. Change 7(1), 21-27 (ISI-Indexed)

2016

Khuong, L. S., Zulkifli, N. W. M., Masjuki, H. H., Mohamad, E. N., Arslan, A., Mosarof, M. H., Azham, A. 2016. A review on the effect of bioethanol dilution on the properties and performance of automotive lubricants in gasoline engines Rsc Advances (ISI-Indexed)
Islam, M. T., Abdullah, A. B., Shahir, S. A., Kalam, M. A., Masjuki, H. H., Shumon, R., & Rashid, M. H. (2016). A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. Journal of Cleaner Production, 137, 728-740. (ISI-Indexed)
Islam, M. M., Hassan, M. H., Kalam, M. A., Habibullah, M., & Hossain, M. M. (2016). Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137, 322-329. (ISI-Indexed)
Dharma, S., Ong, H. C., Masjuki, H. H., Sebayang, A. H., & Silitonga, A. S. (2016). An overview of engine durability and compatibility using biodiesel bioethanol diesel blends in compression-ignition engines. Energy Conversion and Management, 128, 66-81. (ISI-Indexed)
Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Mufti, R. A., Zahid, R. 2016. Tribological performance of nanoparticles as lubricating oil additives Journal of Nanoparticle Research (ISI-Indexed)
Elsheikh, M. H., Sabri, M. F. M., Said, S. M., Miyazaki, Y., Masjuki, H. H., Shnawah, D. A. A., Long, B. D., Naito, S., Bashir, M. A. 2016. Thermoelectric Properties of Microstructurally Modified CoSb3 Skutterudite by Hf-Addition Journal of Electronic Materials (ISI-Indexed)
Silitonga, A. S., Masjuki, H. H., Ong, H. C., Yusaf, T., Kusumo, F., Mahlia, T. M. I. 2016. Synthesis and optimization of Hevea brasiliensis and Ricinus communis as feedstock for biodiesel production: A comparative study Industrial Crops and Products (ISI-Indexed)
Azman, S. S. N., Zulkifli, N. W. M., Masjuki, H., Gulzar, M., Zahid, R. 2016. Study of tribological properties of lubricating oil blend added with graphene nanoplatelets Journal of Materials Research (ISI-Indexed)
Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Rahman, M. M., Imdadul, H. K., Rashedul, H. K. 2016. Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants Renewable Energy (ISI-Indexed)
Masjuki, H. H., Ruhul, A. M., Mustafi, N. N., Kalam, M. A., Arbab, M. I., Fattah, I. M. R. 2016. Study of production optimization and effect of hydroxyl gas on a CI engine performance and emission fueled with biodiesel blends International Journal of Hydrogen Energy (ISI-Indexed)
Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R. 2016. Rice bran: A prospective resource for biodiesel production in Bangladesh International Journal of Green Energy (ISI-Indexed)
Sazzad, B. S., Fazal, M. A., Haseeb, A., Masjuki, H. H. 2016. Retardation of oxidation and material degradation in biodiesel: a review Rsc Advances (ISI-Indexed)
Kalam, M. A., Rashed, M. M., Imdadul, H. K., Masjuki, H. H. 2016. Property development of fatty acid methyl ester from waste coconut oil as engine fuel Industrial Crops and Products (ISI-Indexed)
Silitonga, A. S., Masjuki, H. H., Ong, H. C., Kusumo, F., Mahlia, T. M. I., Bahar, A. H. 2016. Pilot-scale production and the physicochemical properties of palm and Calophyllum inophyllum biodiesels and their blends Journal of Cleaner Production (ISI-Indexed)
Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Ashraful, A. M., Arslan, A., Rashedul, H. K., Monirul, I. M. 2016. Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends Energy Conversion and Management (ISI-Indexed)
Dharma, S., Masjuki, H. H., Ong, H. C., Sebayang, A. H., Silitonga, A. S., Kusumo, F., Mahlia, T. M. I. 2016. Optimization of biodiesel production process for mixed Jatropha curcas-Ceiba pentandra biodiesel using response surface methodology Energy Conversion and Management (ISI-Indexed)
Fazal, M. A., Sazzad, B. S., Haseeb, A., Masjuki, H. H. 2016. Inhibition study of additives towards the corrosion of ferrous metal in palm biodiesel Energy Conversion and Management (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Ashraful, A. M. 2016. Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance Energy Conversion and Management (ISI-Indexed)
Zahid, R., Masjuki, H. H., Varman, M., Abul Kalam, M., Mufti, R. A., Zulkifli, N., Gulzar, M., Azman, S. 2016. Influence of intrinsic and extrinsic conditions on the tribological characteristics of diamond-like carbon coatings: A review Journal of Materials Research (ISI-Indexed)
Rashed, M. M., Kalam, M. A., Masjuki, H. H., Habibullah, M., Imdadul, H. K., Shahin, M. M., Rahman, M. M. 2016. Improving oxidation stability and NOX reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine Industrial Crops and Products (ISI-Indexed)
Ruhul, M. A., Abedin, M. J., Rahman, S. M. A., Masjuki, B. H., Alabdulkarem, A., Kalam, M. A., Shancita, I. 2016. Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics Journal of Cleaner Production (ISI-Indexed)
Norjannah, B., Ong, H. C., Masjuki, H. H., Juan, J. C., Chong, W. T. 2016. Enzymatic transesterification for biodiesel production: a comprehensive review Rsc Advances (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Kamruzzaman, M., Rashed, M. M. 2016. A comparative study of C-4 and C-5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission Fuel (ISI-Indexed)
Abedin, M. J., Imran, A., Masjuki, H. H., Kalam, M. A., Shahir, S. A., Varman, M., Ruhul, A. M. 2016. An overview on comparative engine performance and emission characteristics of different techniques involved in diesel engine as dual-fuel engine operation Renewable Sustainable Energy Reviews (ISI-Indexed)
Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Arslan, A., Monirul, I. M., Ruhul, A. M., Shahir, S. A., Khuong, L. S. 2016. Analysis of thermal stability and lubrication characteristics of Millettia pinnata oil Rsc Advances (ISI-Indexed)
Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Shahir, S. A. 2016. Comparative Analysis on Property Improvement Using Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance (NMR) (H-1 and C-13) Spectra of Various Biodiesel Blended Fuels Energy Fuels (ISI-Indexed)
Arslan, A., Masjuki, H. H., Varman, M., Abul Kalam, M., Quazi, M. M., Mosarof, M. H. 2016. Effect of change in temperature on the tribological performance of micro surface textured DLC coating Journal of Materials Research (ISI-Indexed)
Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., Arslan, A. 2016. Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review Journal of Rare Earths (ISI-Indexed)
Rashed, M. M., Kalam, M. A., Masjuki, H. H., Mofijur, M., Rasul, M. G., Zulkifli, N. W. M. 2016. Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester Industrial Crops and Products (ISI-Indexed)
Ahmed, A., Masjuki, H. H., Varman, M., Kalam, M. A., Habibullah, M., Al Mahmud, K. A. H. 2016. An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals Meccanica (ISI-Indexed)
Ali, O. M., Mamat, R., Masjuki, H. H., Abdullah, A. A. 2016. Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive Energy Conversion and Management (ISI-Indexed)
Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Habibullah, M., Arslan, A., Monirul, I. M. 2016. Assessment of friction and wear characteristics of Calophyllum inophyllum and palm biodiesel Industrial Crops and Products (ISI-Indexed)
Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Ruhul, A. M., Monirul, I. M. 2016. Evaluation of the characteristics of non-oxidative biodiesels: a FAME composition, thermogravimetric and IR analysis Rsc Advances (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Teoh, Y. H., How, H. G. 2016. Higher alcohol-biodiesel-diesel blends: An approach for improving the performance, emission, and combustion of a light-duty diesel engine Energy Conversion and Management (ISI-Indexed)
Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Imdadul, H. K., Rashedul, H. K., Shahin, M. M., Habibullah, M. 2016. A comprehensive study on the improvement of oxidation stability and NOx emission levels by antioxidant addition to biodiesel blends in a light-duty diesel engine Rsc Advances (ISI-Indexed)
Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Atabani, A. E., Fattah, I. M. R., Abedin, M. J. 2016. Production, characterization, engine performance and emission characteristics of Croton megalocarpus and Ceiba pentandra complementary blends in a single-cylinder diesel engine Rsc Advances (ISI-Indexed)
Abedin, M. J., Kalam, M. A., Masjuki, H. H., Sabri, M. F. M., Rahman, S. M. A., Sanjid, A., Fattah, I. M. R. 2016. Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5 Renewable Energy (ISI-Indexed)
Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N., Abedin, M. J. 2016. Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks Journal of Cleaner Production (ISI-Indexed)
Sebayang, A. H., Masjuki, H. H., Ong, H. C., Dharma, S., Silitonga, A. S., Mahlia, T. M. I., Aditiya, H. B. 2016. A perspective on bioethanol production from biomass as alternative fuel for spark ignition engine Rsc Advances (ISI-Indexed)
Milano, J., Ong, H. C., Masjuki, H. H., Chong, W. T., Lam, M. K., Loh, P. K., Vellayan, V. 2016. Microalgae biofuels as an alternative to fossil fuel for power generation Renewable Sustainable Energy Reviews (ISI-Indexed)
Suganya, T., Varman, M., Masjuki, H. H., Renganathan, S. 2016. Macroalgae and microalgae as a potential source for commercial applications along with biofuels production: A biorefinery approach Renewable Sustainable Energy Reviews (ISI-Indexed)
Zulkifli, N. W. M., Azman, S. S. N., Kalam, M. A., Masjuki, H. H., Yunus, R., Gulzar, M. 2016. Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester Tribology International (ISI-Indexed)
Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., Arslan, A. 2016. Laser-based Surface Modifications of Aluminum and its Alloys Critical Reviews in Solid State and Materials Sciences (ISI-Indexed)
MH Elsheikh, MFM Sabri, SM Said, Y Miyazaki, HH Masjuki, DAA Shnawah, N Abdullah, S Naito, MBA Bashir, Microstructural Modification of Co4Sb12 Skutterudite Thermoelectric Material Through Al Exceed Doping, Science of Advanced Materials, 8, pp.2121-2127 (2016) (ISI-Indexed)
Monirul, I. M., Masjuki, H. H., Kalam, M. A., Mosarof, M. H., Zulkifli, N. W. M., Teoh, Y. H., How, H. G. 2016. Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends Fuel. (Tier 1, Impact Factor = 3.611) (ISI-Indexed)
Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Zulkifli, N. W. M., Mufti, R. A., Liaquat, A. M., Zahid, R., ArsIan, A. 2016. Effects of biodiesel blends on lubricating oil degradation and piston assembly energy losses Energy. (Tier 1, Impact Factor = 4.292) (ISI-Indexed)
Arslan, A., Masjuki, H. H., Kalam, M. A., Varman, M., Mufti, R. A., Mosarof, M. H., Khuong, L. S., Quazi, M. M. 2016. Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review Critical Reviews in Solid State and Materials Sciences. (Tier 1, Impact Factor = 5.556) (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., et al. 2016. Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance Energy Conversion and Management (SCOPUS-Indexed)

2015

Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Fattah, I. M. R. 2015. Oil filter modification for biodiesel-fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction Energy Conversion and Management (ISI-Indexed)
Atabani, A. E., Badruddin, I. A., Masjuki, H. H., Chong, W. T., Lee, K. T. 2015. Pangium edule Reinw: A Promising Non-edible Oil Feedstock for Biodiesel Production Arabian Journal for Science and Engineering (ISI-Indexed)
Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., & Rizwanul Fattah, I. M. (2015). Evaluation of combustion, performance, and emissions of optimum palm coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90(0), 111-120. doi: http://dx.doi.org/10.1016/j.enconman.2014.11.017 (ISI-Indexed)
Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., & Habibullah, M. (2015). Effect of alcohol gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86(0), 230-237. doi: http://dx.doi.org/10.1016/j.jclepro.2014.08.032 (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., Ashraful, A. M. 2015. Potential of biodiesel as a renewable energy source in Bangladesh Renewable Sustainable Energy Reviews (ISI-Indexed)
Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Kusumo, F., Aditiya, H. B., Ghazali, N. N. N.�2015.�Schleichera oleosa L oil as feedstock for biodiesel production�Fuel (ISI-Indexed)
Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., Ruhul, A. M. 2015. Stability of biodiesel, its improvement and the effect of antioxidant treated blends on engine performance and emission Rsc Advances (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Gulzar, M., Arslan, A., Zahid, R. 2015. Tribological Characteristics of Calophyllum inophyllum-Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant Tribology Transactions (ISI-Indexed)
Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil-Based Lubricated Condition Tribology Transactions (ISI-Indexed)
Ghosh, S., Choudhury, D., Roy, T., Bin Mamat, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid Science and Technology of Advanced Materials (ISI-Indexed)
Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components of synovial fluid in artificial joint implants Science and Technology of Advanced Materials (ISI-Indexed)
Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEAN countries Renewable Sustainable Energy Reviews (ISI-Indexed)
Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Mufti, R. A., Zulkifli, N. W. M., Yunus, R., Zahid, R. 2015. Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles Tribology International (ISI-Indexed)
Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion and Management (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances (ISI-Indexed)
Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil-Based Lubricated Condition Tribology Transactions (ISI-Indexed)
Ghosh, S., Choudhury, D., Roy, T., Bin Mamat, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid Science and Technology of Advanced Materials (ISI-Indexed)
Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components of synovial fluid in artificial joint implants Science and Technology of Advanced Materials (ISI-Indexed)
Monirul, I. M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashedul, H. K., Rashed, M. M., Imdadul, H. K., Mosarof, M. H. 2015. A comprehensive review on biodiesel cold flow properties and oxidation stability along with their improvement processes Rsc Advances (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., Monirul, I. M., Mosarof, M. H. 2015. A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends Rsc Advances (ISI-Indexed)
Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2015. An updated overview of diamond-like carbon coating in tribology Critical Reviews in Solid State and Materials Sciences (ISI-Indexed)
Palash, S. M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Sanjid, A. 2015. Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh Energy Conversion and Management (ISI-Indexed)
Sanjid, A., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Fattah, I. M. R. 2015. Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends Rsc Advances (ISI-Indexed)
Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Comparative assessment of performance, emissions and combustion characteristics of gasoline/diesel and gasoline/biodiesel in a dual-fuel engine Rsc Advances (ISI-Indexed)
Hossain, S., Masjuki, H. H., Varman, M., Kalam, M. A., Rahman, S. M. A. 2015. Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants Rsc Advances (ISI-Indexed)
Zahid, R., Masjuki, H. H., Varman, M., Mufti, R. A., Kalam, M. A., Gulzar, M. 2015. Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review Tribology Letters (ISI-Indexed)
Masum, S. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Habibullah, M. 2015. Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine Journal of Cleaner Production (ISI-Indexed)
Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Effect of injection timing and EGR on engine-out-responses of a common-rail diesel engine fueled with neat biodiesel Rsc Advances (ISI-Indexed)
Imtenan, S., Masjuki, H. H., Varman, M., Fattah, I. M. R., Sajjad, H., Arbab, M. I. 2015. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend Energy Conversion and Management (ISI-Indexed)
Habibullah, M., Fattah, I. M. R., Masjuki, H. H., Kalam, M. A. 2015. Effects of Palm-Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine Energy Fuels (ISI-Indexed)
Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEAN countries Renewable Sustainable Energy Reviews (ISI-Indexed)
Teoh, Y. H., Masjuki, H. H., Noor, I. M., Ali, B. S., Kalam, M. A., How, H. G. 2015. Evaluation of a novel biofuel from unwanted waste and its impact on engine performance, emissions, and combustion characteristics in a diesel engine Rsc Advances (ISI-Indexed)
Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., Fattah, I. M. R. 2015. Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine Energy Conversion and Management (ISI-Indexed)
Imtenan, S., Masjuki, H. H., Varman, M., Fattah, I. M. R. 2015. Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend Rsc Advances (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Masum, B. M., Arslan, A., Gulzar, M. 2015. Friction and wear characteristics of Calophyllum inophyllum biodiesel Industrial Crops and Products (ISI-Indexed)
Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Rashed, M. M., Imdadul, H. K., Monirul, I. M. 2015. Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics Energy Conversion and Management (ISI-Indexed)
Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion and Management (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances (ISI-Indexed)
Wan Ghazali, W. N. M., Mamat, R., Masjuki, H. H., & Najafi, G. (2015). Effects of biodiesel from different feedstocks on engine performance and emissions: A review. Renewable and Sustainable Energy Reviews, 51, 585-602. (ISI-Indexed)
Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N. W. B. M., & Abedin, M. J. Performance and emission of multi-cylinder diesel engine using biodiesel blends obtained from mixed inedible feedstocks. Journal of Cleaner Production. doi: http://dx.doi.org/10.1016/j.jclepro.2015.07.154 (ISI-Indexed)
N Abdullah, MH Elsheikh, NMJ Nik Ibrahim, S Mohd Said, MF Mohd Sabri, HH Masjuki and A Marlina, Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands, RSC Adv., 2015, DOI: 10.1039/C5RA07100C (2015) (ISI-Indexed)
Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., . . . Mosarof, M. H. (2015). A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends. [10.1039/C5RA09563H]. RSC Advances, 5(83), 67541-67567. (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., & Ashraful, A. M. (2015). Potential of biodiesel as a renewable energy source in Bangladesh. Renewable and Sustainable Energy Reviews, 50(0), 819-834. (ISI-Indexed)
Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., & Ruhul, A. M. (2015). Stability of biodiesel, its improvement and the effect of antioxidant treated blends on engine performance and emission. RSC Advances, 5(46),36240-36261. (ISI-Indexed)
Ashraful, A. M., Masjuki, H. H., Kalam, M. A. 2015. Particulate matter, carbon emissions and elemental compositions from a diesel engine exhaust fuelled with diesel-biodiesel blends Atmospheric Environment. (Tier 1, Impact Factor = 3.281) (ISI-Indexed)
A.S. Silitonga, H.H. Masjuki, T.M. Indra Mahlia, Ong H.C., F. Kusumo, H.B Aditiya, N.N.N Ghazali (2015). Schleichera oleosa L oil as feedstock for biodiesel production, Fuel. (ISI-Indexed)
M. Gulzar, H.H. Masjuki, M. Varman, M.A. Kalam, R.A. Mufti, N.W.M. Zulkifli, R. Yunus, R. Zahid, Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles, Tribology International. (ISI-Indexed)
H. Sajjad , H. H. Masjuki, M. Varman, M. A. Kalam, M. I. Arbab, S. Imtenan, and A. M. Ashraful. "Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion performance emission characteristics." Energy Conversion and Management 97 (2015): 42-52. (ISI-Indexed)
S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, A.M. Ashraful, Performance and emission assessment of diesel biodiesel ethanol/bioethanol blend as a fuel in diesel engines: A review, Renewable and Sustainable Energy Reviews, 48 (2015) 62-78. (ISI-Indexed)
S. Hossain, H.H. Masjuki, M. Varman, M.A. Kalam, S.M.A. Rahman, Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants, RSC Advances, 5 (2015) 13068-13077 (ISI-Indexed)
R. Zahid, H.H. Masjuki, M. Varman, R. Mufti, M.A. Kalam, M. Gulzar, Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review, Tribol Lett, 58 (2015) 1-28 (ISI-Indexed)
A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, I.M.R. Fattah, Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends, RSC Advances, 5 (2015) 13246-13255 (ISI-Indexed)
M. Mofijur, H.H. Masjuki, M.A. Kalam, S.M. Ashrafur Rahman, H.M. Mahmudul, Energy scenario and biofuel policies and targets in ASEAN countries, Renewable and Sustainable Energy Reviews, 46 (2015) 51-61 (ISI-Indexed)
M. Gulzar, H.H. Masjuki, M.A. Kalam, M. Varman, I.M. Rizwanul Fattah, Oil filter modification for biodiesel fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction, Energy Conversion and Management, 91 (2015) 168-175. (ISI-Indexed)
M.A. Wakil, M.A. Kalam, H.H. Masjuki, A.E. Atabani, I.M. Rizwanul Fattah, Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend, Energy Conversion and Management, 94 (2015) 51-67. (ISI-Indexed)
S.M. Palash, H.H. Masjuki, M.A. Kalam, A.E. Atabani, I.M. Rizwanul Fattah, A. Sanjid, Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh, Energy Conversion and Management, 91 (2015) 149-157. (ISI-Indexed)
M. Habibullah, I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, Effects of Palm Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine, Energy & Fuels, 29 (2015) 734-743 (ISI-Indexed)
K.A.H. Al Mahmud, M.A. Kalam, H.H. Masjuki, H.M. Mobarak, N.W.M. Zulkifli, An updated overview of diamond-like carbon coating in tribology, Critical Reviews in Solid State and Materials Sciences, 40 (2014) 90-118. (ISI-Indexed)
S. Imtenan, H.H. Masjuki, M. Varman, I.M. Rizwanul Fattah, H. Sajjad, M.I. Arbab, Effect of n-butanol and diethyl ether as oxygenated additives on combustion emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel jatropha biodiesel blend, Energy Conversion and Management, 94 (2015) 84-94 (ISI-Indexed)
S. Imtenan, H.H. Masjuki, M. Varman, I.M. Rizwanul Fattah, Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend, RSC Advances, 5 (2015) 17160-17170 (ISI-Indexed)
Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components of synovial fluid in artificial joint implants Science and Technology of Advanced Materials (SCOPUS-Indexed)
Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil Based Lubricated Condition Tribology Transactions (SCOPUS-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Gulzar, M., Arslan, A., Zahid, R. 2015. Tribological Characteristics of Calophyllum inophyllum Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant Tribology Transactions (SCOPUS-Indexed)
Reham, S. S., Masjuki, H. H., Kalam, M. A., Shancita, I., Fattah, I. M. R., Ruhul, A. M. 2015. Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901) (ISI-Indexed)
Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Reham, S. S., Rashed, M. M. 2015. State of the art of biodiesel production processes: a review of the heterogeneous catalyst Rsc Advances. (Tier 1, Impact Factor = 3.840) (ISI-Indexed)
Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Teoh, Y. H., How, H. G., Fattah, I. M. R. 2015. Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend Energy Conversion and Management. (Tier 1, Impact Factor = 4.380) (ISI-Indexed)
Hntenan, S., Rahman, S. M. A., Masjuki, H. H., Varman, M., Kalam, M. A. 2015. Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901) (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., & Rashedul, H. K. (2015). Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters. RSC Advances, 5(38), 29723-29733. (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Masum, B. M., Arslan, A., & Gulzar, M. (2015). Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76, 188-197. (ISI-Indexed)
Ghazali, W., Mamat, R., Masjuki, H. H., Najafi, G. 2015. Effects of biodiesel from different feedstocks on engine performance and emissions: A review Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.901) (ISI-Indexed)
Teoh, Y. H., Masjuki, H. H., Noor, I. M., Ali, B. S., Kalam, M. A., & How, H. G. (2015). Evaluation of Novel Biofuel from Unwanted Waste and its Impact on Engine Performance, Emissions, and Combustion Characteristics in a Diesel Engine. RSC Advances. (ISI-Indexed)
Arslan, A., Masjuki, H. H., Varman, M., Kalam, M. A., Quazi, M. M., Al Mahmud, K. A. H., Gulzar, M., Habibullah, M. 2015. Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition Applied Surface Science. (Tier 1, Impact Factor = 2.711) (ISI-Indexed)
Wakil, M. A., Masjuki, H. H., Kalam, M. A., Teoh, Y. H., How, H. G., Imtenan, S. 2015. Influence of engine operating variable on combustion to reduce exhaust emissions using various biodiesels blend Rsc Advances. (Tier 1, Impact Factor = 3.840) (ISI-Indexed)
Yusoff, M., Zulkifli, N. W. M., Masum, B. M., Masjuki, H. H. 2015. Feasibility of bioethanol and biobutanol as transportation fuel in spark-ignition engine: a review Rsc Advances. (Tier 1, Impact Factor = 3.840) (ISI-Indexed)

2014

Sajjad H, Masjuki HH, Varman M, Kalam MA, Arbab MI, Imtenan S, et al. Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renewable and Sustainable Energy Reviews. 2014;30(0):961-86. (ISI-Indexed)
Sanjid, A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., & Rahman, S. M. A. (2014). Experimental Investigation of Mustard Biodiesel Blend Properties, Performance, Exhaust Emission and Noise in an Unmodified Diesel Engine. APCBEE Procedia, 10(0), 149-153. doi: http://dx.doi.org/10.1016/j.apcbee.2014.10.033 (SCOPUS-Indexed)
M. Hamid Elsheikh, D.A. Shnawah, M.F.M. Sabri, S.B.M. Said, M. Haji Hassan, M.B. Ali Bashir, M. Mohamad, A review on thermoelectric renewable energy: Principle parameters that affect their performance, Renewable and Sustainable Energy Reviews, 30 (2014) 337-355. (ISI-Indexed)
Shancita, I., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Rashed, M. M., & Rashedul, H. K. (2014). A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles. Energy Conversion and Management, 88(0), 794-807. doi: http://dx.doi.org/10.1016/j.enconman.2014.09.036 (ISI-Indexed)
S.M. Palash, M.A. Kalam, H.H. Masjuki, M.I. Arbab, B.M. Masum, A. Sanjid, Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends, Energy Conversion and Management, 77 (2014) 577-585. (ISI-Indexed)
I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, B.M. Masum, S. Imtenan, A.M. Ashraful, Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks, Renewable and Sustainable Energy Reviews, 30 (2014) 356-370. (ISI-Indexed)
Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., & Habibullah, M. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures. Applied Surface Science(0). doi: http://dx.doi.org/10.1016/j.apsusc.2014.08.168 (ISI-Indexed)
Ahmed, S., Hassan, M. H., Kalam, M. A., Ashrafur Rahman, S. M., Abedin, M. J., & Shahir, A. (2014). An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends. Journal of Cleaner Production, 79(0), 74-81. doi: http://dx.doi.org/10.1016/j.jclepro.2014.05.019 (ISI-Indexed)
Liaquat, A. M., Masjuki, H. H., Kalam, M. A., & Rizwanul Fattah, I. M. (2014). Impact of biodiesel blend on injector deposit formation. Energy, 72(0), 813-823. doi: http://dx.doi.org/10.1016/j.energy.2014.06.006 (ISI-Indexed)
Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., & Wee, L. K. (2014). Numerical study on convective heat transfer of a spark ignition engine fueled with bioethanol. International Communications in Heat and Mass Transfer, 58(0), 33-39. doi: http://dx.doi.org/10.1016/j.icheatmasstransfer.2014.0 8.019 (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Ashraful, A. M., & Mobarak, H. M. (2014). Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine. Energy Conversion and Management, 87(0), 250-257. doi: http://dx.doi.org/10.1016/j.enconman.2014.07.006 (ISI-Indexed)
Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., & Imtenan, S. (2014). Tailoring the key fuel properties using different alcohols (C2 C6) and their evaluation in gasoline engine. Energy Conversion and Management, 88(0), 382-390. doi: http://dx.doi.org/10.1016/j.enconman.2014.08.050 (ISI-Indexed)
Rizwanul Fattah, I. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., & Abedin, M. J. (2014). Synthetic phenolic antioxidants to biodiesel: path toward NOx reduction of an unmodified indirect injection diesel engine. Journal of Cleaner Production, 79(0), 82-90. doi: http://dx.doi.org/10.1016/j.jclepro.2014.05.071 (ISI-Indexed)
Shafie, S. M., Masjuki, H. H., & Mahlia, T. M. I. (2014b). Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment. Applied Energy, 135(0), 299-308. doi: http://dx.doi.org/10.1016/j.apenergy.2014.08.101 (ISI-Indexed)
Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., & Fattah, I. M. R. (2014). Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine. Industrial Crops and Products, 59(0), 96-104. doi: http://dx.doi.org/10.1016/j.indcrop.2014.05.001 (ISI-Indexed)
Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Ashrafur Rahman, S. M., & Shahir, S. A. (2014). The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine. Energy Conversion and Management, 88(0), 348-364. doi: http://dx.doi.org/10.1016/j.enconman.2014.08.034 (ISI-Indexed)
Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., & Abedin, M. J. (2014). Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel. Energy Conversion and Management, 87(0), 48-57. doi: http://dx.doi.org/10.1016/j.enconman.2014.06.093 (ISI-Indexed)
I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M.A. Wakil, H.K. Rashedul, M.J. Abedin, Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants, Industrial Crops and Products, Volume 57, June 2014, Pages 132-140, ISSN 0926-6690, (ISI-Indexed)
Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., & Ashraful, A. M. (2014). Combustion, performance, and emission characteristics of low heat rejection engine operating on various biodiesels and vegetable oils. Energy Conversion and Management, 85(0), 173-189. doi: http://dx.doi.org/10.1016/j.enconman.2014.05.065 (ISI-Indexed)
N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, R. Yunus, S.S.N. Azman. Lubricity of bio-based lubricant derived from chemically modified jatropha methyl ester. Jurnal Tribologi. 1: 18-39. (Non-ISI/Non-SCOPUS)
Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., & Ashrafur Rahman, S. M. (2014). Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Conversion and Management, 83(0), 149- 158. doi:http://dx.doi.org/10.1016/j.enconman.2014.03.052 (ISI-Indexed)
Shafie, S. M., Masjuki, H. H., & Mahlia, T. M. I. Life cycle assessment of rice straw-based power generation in Malaysia. Energy(0). doi: http://dx.doi.org/10.1016/j.energy.2014.04.014 (ISI-Indexed)
How, H. G., Masjuki, H. H., Kalam, M. A., & Teoh, Y. H. An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine. Energy(0). doi:http://dx.doi.org/10.1016/j.energy.2014.03.070 (ISI-Indexed)
Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Arbab, M. I., Cheng, S. F., & Gouk, S. W. (2014). Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine. Energy Conversion and Management, 82(0), 169-176. doi: http://dx.doi.org/10.1016/j.enconman.2014.02.073 (ISI-Indexed)
Rizwanul Fattah, I. M., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., & Shahir, S. A. (2014). Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors. Energy Conversion and Management, 83(0), 232-240. doi: http://dx.doi.org/10.1016/j.enconman.2014.03.069 (ISI-Indexed)
Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., & Abedin, M. J. (2014). Assessment of emission and performance of compression ignition engine with varying injection timing. Renewable and Sustainable Energy Reviews, 35(0), 221-230. doi: http://dx.doi.org/10.1016/j.rser.2014.03.049 (ISI-Indexed)
Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., & Rahman, M. M. (2014). Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends. Renewable Energy, 68(0), 644-650. doi: http://dx.doi.org/10.1016/j.renene.2014.02.050 (ISI-Indexed)
Shafie, S. M., Masjuki, H. H., Mahlia, T. M. I. 2014. Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment Applied Energy. (Tier 1, Impact Factor = 5.261) (ISI-Indexed)
Fattah, I. M. R., Hassan, M. H., Kalam, M. A., Atabani, A. E., Abedin, M. J. 2014. Synthetic phenolic antioxidants to biodiesel: path toward NOx reduction of an unmodified indirect injection diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., Imtenan, S. 2014. Tailoring the key fuel properties using different alcohols (C-2-C-6) and their evaluation in gasoline engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rahman, S. M. A., Shahir, S. A. 2014. The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Al Mahmud, K. A. H., Varman, M., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2014. Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil Surface Coatings Technology. (Tier 1, Impact Factor = 2.199) (ISI-Indexed)
Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., Habibullah, M. 2014. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures Applied Surface Science. (Tier 1, Impact Factor = 2.538) (ISI-Indexed)
Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., Fattah, I. M. R. 2014. Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine Industrial Crops and Products. (Tier 1, Impact Factor = 3.208) (ISI-Indexed)
Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Sajjad, H., Imtenan, S. 2014. Performance and emission characteristics of a diesel engine fueled by an optimum biodiesel-biodiesel blend Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rashed, M. M., Sanchita, I., Shaon, T. 2014. Performance and emission characteristics of a compression ignition engine running with linseed biodiesel Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
Rahman, M. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., Memon, L. A., Rahman, S. M. A. 2014. Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., Wee, L. K. 2014. Numerical study on convective heat transfer of a spark ignition engine fueled with bioethanol International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 2.124) (ISI-Indexed)
Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., Abedin, M. J. 2014. Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Palash, S. M., Kalam, M. A., Masjuki, H. H., Arbab, M. I., Masum, B. M., Sanjid, A. 2014. Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., Rahman, S. M. A. 2014. Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Imtenan, S., Varman, M., Masjuki, H. H., Kalam, M. A., Sajjad, H., Arbab, M. I., Fattah, I. M. R. 2014. Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Masum, B. M., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Daggig, E. E. 2014. Impact of denatured anhydrous ethanol-gasoline fuel blends on a spark-ignition engine Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R. 2014. Impact of biodiesel blend on injector deposit formation Energy. (Tier 1, Impact Factor = 4.159) (ISI-Indexed)
Shahir, S. A., Masjuki, H. H., Kalam, M. A., Imran, A., Fattah, I. M. R., Sanjid, A. 2014. Feasibility of diesel-biodiesel-ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51) (ISI-Indexed)
Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., Shahir, S. A. 2014. Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Abedin, M. J., Masjuki, H. H., Kalam, M. A., Varman, M., Arbab, M. I., Fattah, I. M. R., Masum, B. M. 2014. Experimental Investigation of a Multicylinder Unmodified Diesel Engine Performance, Emission, and Heat Loss Characteristics Using Different Biodiesel Blends: Rollout of B10 in Malaysia Scientific World Journal. (Tier 2, Impact Factor = 1.219) (ISI-Indexed)
Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Masum, B. M. 2014. Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rahman, S. M. A. 2014. Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51) (ISI-Indexed)
Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Hazrat, M. A., Masum, B. M., Imtenan, S., Ashraful, A. M. 2014. Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51) (ISI-Indexed)
Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Mofijur, M., Abedin, M. J. 2014. Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., Chong, W. T. 2014. Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties Industrial Crops and Products. (Tier 1, Impact Factor = 3.208) (ISI-Indexed)
Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashed, M. M. 2014. Comparative study of gas-to-liquid fuel, B5 diesel and their blends with respect to fuel properties, engine performance and exhaust emissions Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Mobarak, H. M. 2014. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine Industrial Crops and Products. (Tier 1, Impact Factor = 3.208) (ISI-Indexed)
Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Ashraful, A. M. 2014. Combustion, performance, and emission characteristics of low heat rejection engine operating on various biodiesels and vegetable oils Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Sanjid, A., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Abedin, M. J. 2014. Combustion, performance and emission characteristics of a DI diesel engine fueled with Brassica juncea methyl ester and its blends Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Indexed)
Habibullah, M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Ashraful, A. M., Mobarak, H. M. 2014. Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., Abedin, M. J. 2014. Assessment of emission and performance of compression ignition engine with varying injection timing Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51) (ISI-Indexed)
Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Rahman, M. M. 2014. Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends Renewable Energy. (Tier 2, Impact Factor = 3.361) (ISI-Indexed)
Ahmed, S., Hassan, M. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Shahir, A. 2014. An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Fazal, M. A., Haseeb, A., Masjuki, H. H. 2014. A critical review on the tribological compatibility of automotive materials in palm biodiesel Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
Shancita, I., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Rashed, M. M., Rashedul, H. K. 2014. A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Indexed)
S. Imtenan, H.H. Masjuki, M. Varman, M.I. Arbab, H. Sajjad, I.M.R. Fattah, M.J. Abedin, A.S.M. Hasib, Emission and Performance Improvement Analysis of Biodiesel-diesel Blends with Additives, Procedia Engineering, 90 (2014) 472-477 (SCOPUS-Indexed)
Rizwanul Fattah, I. M., H. H. Masjuki, M. A. Kalam, and B. M. Masum. "Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel." Materials Research Innovations 18, no. S6 (2014): S6-90. (ISI-Indexed)
H. Sajjad, H.H. Masjuki, M. Varman, M.A. Kalam, M.I. Arbab, S. Imtenan, M.M. Rashed, Comparative study of gas-to-liquid fuel, B5 diesel and their blends with respect to fuel properties, engine performance and exhaust emissions, RSC Advances, 4 (2014) 44529-44536. (ISI-Indexed)
M.A. Wakil, M.A. Kalam, H.H. Masjuki, I.M. Rizwanul Fattah, B.M. Masum, Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties, RSC Advances, 4 (2014) 56984-56991 (ISI-Indexed)
H. Sajjad, H.H. Masjuki, M. Varman, M.M.R. Khan, M.I. Arbab, S. Imtenan, A. Sanjid, Comparative Study of Biodiesel, GTL Fuel and Their Blends in Context of Engine Performance and Exhaust Emission, Procedia Engineering, 90 (2014) 466-471 (SCOPUS-Indexed)
Abdullah, Muhammad Ilman Hakimi Chua, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Noreffendy Tamaldin, Nur Rashid Mat Nuri, Masjuki Hassan, and S. A. Rafeq. "Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles." In Applied Mechanics and Materials, vol. 607, pp. 70-73. 2014. (SCOPUS-Indexed)
Abdullah, M. Adlan, Farid Nasir Ani, and Masjuki Hassan. "Performance and Emission of a Common Rail Passenger Car Engine Fuelled with Palm Oil Biodiesel." In Applied Mechanics and Materials, vol. 564, pp. 66- 71. 2014. (SCOPUS-Indexed)
Zulkifli, N. W. M., M. A. Kalam, H. H. Masjuki, K. A. H. Al Mahmud, and R. Yunus. "The effect of palm oil trimethylolpropane ester on extreme pressure lubrication." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228, no. 2 (2014): 160-169. (ISI-Indexed)
A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, S.M. Palash, Production of palm and jatropha based biodiesel and investigation of palm- jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine, Journal of Cleaner Production, 65 (2014) 295- 303. (ISI/SCOPUS Indexed Publication)
I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M. Mofijur, M.J. Abedin, Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends, Energy Conversion and Management, 79 (2014) 265-272. (ISI/SCOPUS Indexed Publication)
M.A. Fazal, A.S.M.A. Haseeb, H.H. Masjuki, A critical review on the tribological compatibility of automotive materials in palm biodiesel, Energy Conversion and Management, 79 (2014) 180-186. (ISI/SCOPUS Indexed Publication)
S. Imtenan, M. Varman, H.H. Masjuki, M.A. Kalam, H. Sajjad, M.I. Arbab, I.M. Rizwanul Fattah, Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review, Energy Conversion and Management, 80 (2014) 329-356. (ISI/SCOPUS Indexed Publication)
H.M. Mobarak, E. Niza Mohamad, H.H. Masjuki, M.A. Kalam, K.A.H. Al Mahmud, M. Habibullah, A.M. Ashraful, The prospects of biolubricants as alternatives in automotive applications, Renewable and Sustainable Energy Reviews, 33 (2014) 34-43 (ISI/SCOPUS Indexed Publication)
A.M. Ashraful, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M. Habibullah, M. Syazwan, Study of the Effect of Storage Time on the Oxidation and Thermal Stability of Various Biodiesels and Their Blends, Energy & Fuels, 28 (2014) 1081-1089. (ISI/SCOPUS Indexed Publication)
K.A.H. Al Mahmud, M. Varman, M.A. Kalam, H.H. Masjuki, H.M. Mobarak, N.W.M. Zulkifli, Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil, Surface and Coatings Technology. (ISI/SCOPUS Indexed Publication)
S.M.A. Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, S. Imtenan, Effect of idling on fuel consumption and emissions of a diesel engine fueled by Jatropha biodiesel blends, Journal of Cleaner Production. (ISI/SCOPUS Indexed Publication)
H.C. Ong, H.H. Masjuki, T.M.I. Mahlia, A.S. Silitonga, W.T. Chong, K.Y. Leong, Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine, Energy Conversion and Management, 81 (2014) 30-40. (ISI/SCOPUS Indexed Publication)
M.M. Rahman, M.H. Hassan, M.A. Kalam, A.E. Atabani, L.A. Memon, S.M.A. Rahman, Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine, Journal of Cleaner Production, 65 (2014) 304-310. (ISI/SCOPUS Indexed Publication)
A.M. Ashraful, H.H. Masjuki, M.A. Kalam, I.M. Rizwanul Fattah, S. Imtenan, S.A. Shahir, H.M. Mobarak, Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review, Energy Conversion and Management, 80 (2014) 202-228. (ISI/SCOPUS Indexed Publication)
S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, I.M.R. Fattah, A. Sanjid, Feasibility of diesel biodiesel ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion, Renewable and Sustainable Energy Reviews, 32 (2014) 379-395. (ISI/SCOPUS Indexed Publication)
Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., & Chong, W. T. (2014). Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel diesel blending on their physico-chemical properties. Industrial Crops and Products, 60(0), 130-137. doi: http://dx.doi.org/10.1016/j.indcrop.2014.06.011 (ISI-Indexed)
B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignition engine, RSC Advances, 4 (2014) 51220-51227 (ISI-Indexed)
Teoh, Y. H., Masjuki, H. H., Kalam, M. A., Amalina, M. A., How, H. G.�2014.�Effects of Jatropha biodiesel on the performance, emissions, and combustion of a converted common-rail diesel engine�Rsc Advances (ISI-Indexed)
B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignition engine, RSC Advances, 4 (2014) 51220-51227 (ISI-Indexed)
Atabani, A. E., Irfan Anjum Badruddin, H. H. Masjuki, W. T. Chong, and Keat Teong Lee. "Pangium edule Reinw: A Promising Non-edible Oil Feedstock for Biodiesel Production." Arabian Journal for Science and Engineering (2014): 1-12. (ISI-Indexed)
Rahman, SM Ashrafur, Hassan Masjuki, Md Kalam, M. J. Abedin, A. Sanjid, S. Imtenan, and M. I. Arbab. Assessing Effects of Idling of a Diesel Engine Operated with Optimized Blend of Palm and Mustard Biodiesel. No. 2014-01-1936. SAE Technical Paper, 2014. (SCOPUS-Indexed)
Teoh, Y. H., H. H. Masjuki, M. A. Kalam, M. A. Amalina, and H. G. How. "Impact of Premixed Kerosene Fuel on Performance, Emission and Combustion Characteristics in Partial HCCI Engine." Energy Procedia 61 (2014): 1830-1834. (SCOPUS-Indexed)
H.M. Mobarak, H.H. Masjuki, E.N. Mohamad, S.M.A. Rahman, K.A.H.A. Mahmud, M. Habibullah, S. Salauddin, Effect of DLC Coating on Tribological Behavior of Cylinder Liner-piston Ring Material Combination When Lubricated with Jatropha Oil, Procedia Engineering, 90 (2014) 733-739 (SCOPUS-Indexed)
MLA Abdullah, M. Adlan, Farid Nasir Ani, and Masjuki Hassan. "The Effects of Injection Parameters on the Performance of Common Rail Light Duty Engine Fueled with Palm Oil Biodiesel." Applied Mechanics and Materials 465 (2014): 322-326. (SCOPUS-Indexed)
Silitonga, A. S., Hwai Chyuan Ong, T. M. I. Mahlia, H. H. Masjuki, and W. T. Chong. "Biodiesel Conversion from High FFA Crude Jatropha Curcas, Calophyllum Inophyllum and Ceiba Pentandra Oil." Energy Procedia 61 (2014): 480-483. (SCOPUS-Indexed)
Habibullah, M., H. H. Masjuki, M. A. Kalam, A. M. Ashraful, K. A. H. Al Mahmud, and H. M. Mobarak. "Comparative Study of Properties and Engine Performance Using Blend of Palm and Coconut Biodiesel." In Applied Mechanics and Materials, vol. 663, pp. 13-18. 2014. (SCOPUS-Indexed)
Al Mahmud, K. A. H., M. A. Kalam, M. F. M. Sabri, H. H. Masjuki, and M. M. Rashed. "Tribological Characteristics of Tetrahedral (ta-C) DLC Coating in the Presence of Commercial Lubricating Oil." In Applied Mechanics and Materials, vol. 679, pp. 25- 29. 2014. (SCOPUS-Indexed)
A. Sanjid, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, M.J. Abedin, Combustion, performance and emission characteristics of a DI diesel engine fueled with Brassica juncea methyl ester and its blends, RSC Advances, 4 (2014) 36973-36982 (ISI-Indexed)
How, H. G., Masjuki, H. H., Kalam, M. A., Teoh, Y. H.�2014.�An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine�Energy (ISI-Indexed)
Fattah, I. M. R., Kalam, M. A., Masjuki, H. H., Wakil, M. A.�2014.�Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil�Rsc Advances (ISI-Indexed)
Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Imtenan, S.�2014.�Effect of idling on fuel consumption and emissions fueled by Jatropha biodiesel blends of a diesel engine�Journal of Cleaner Production (ISI-Indexed)
Ong, H. C., Masjuki, H. H., Mahlia, T. M. I., Silitonga, A. S., Chong, W. T., Yusaf, T.�2014.�Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine�Energy (ISI-Indexed)
Golshokouh, I., Syahrullail, S., Ani, F. N., Masjuki, H. H.�2014.�INVESTIGATION OF PALM FATTY ACID DISTILLATE OIL AS AN ALTERNATIVE TO PETROCHEMICAL- BASED LUBRICANTS�Journal of Oil Palm Research (ISI-Indexed)
Ahamed, J. U., Saidur, R., Masjuki, H. H.�2014.�Investigation of Environmental and Heat Transfer Analysis of Air Conditioner Using Hydrocarbon Mixture Compared to R-22�Arabian Journal for Science and Engineering (ISI-Indexed)
B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M. Palash, I.M.R. Fattah, Performance and emission analysis of a multi cylinder gasoline engine operating at different alcohol-gasoline blends, RSC Advances, 4 (2014) 27898- 27904 (ISI-Indexed)
How, H. G., H. H. Masjuki, M. A. Kalam, and Y. H. Teoh. "Effect of Ethanol-Coconut Oil Methyl Ester on the Performance, Emission and Combustion Characteristics of a High-Pressure Common-Rail DI Engine." In Applied Mechanics and Materials, vol. 663, pp. 19-25. 2014. (SCOPUS-Indexed)
M. Habibullah, H.H. Masjuki, M.A. Kalam, A.M. Ashraful, M.A. Habib, H.M. Mobarak, Effect of Bio- Lubricant on Tribological Characteristics of Steel, Procedia Engineering, 90 (2014) 740-745 (SCOPUS-Indexed)
B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignition engine, RSC Advances, 4 (2014) 51220-51227 (ISI-Indexed)
Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Masum, B. M. 2014. Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel Materials Research Innovations. (Tier 4, Impact Factor = 0.473) (ISI-Indexed)
Mofijur M, Masjuki HH, Kalam MA, Atabani AE, Fattah IMR, Mobarak HM. (2014) Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Industrial Crops and Products, 53;78-84. (ISI-Indexed)
Liza, S., Haseeb, A., Masjuki, H. H. 2014. Wear behaviour of PMMA against 316L stainless steel under dry and lubricated conditions Industrial Lubrication and Tribology. (Tier 4, Impact Factor = 0.316) (ISI-Indexed)

2013

Atabani, A. E., Mahlia, T. M. I., Anjum Badruddin, I., Masjuki, H. H., Chong, W. T., & Lee, K. T. (2013). Investigation of physical and chemical properties of potential edible and non-edible feedstocks for biodiesel production, a comparative analysis. Renewable and Sustainable Energy Reviews, 21(0), 749-755. doi: http://dx.doi.org/10.1016/j.rser.2013.01.027 (ISI-Indexed)
S.M. Palash, H.H. Masjuki, M.A. Kalam, B.M. Masum, A. Sanjid, M.J. Abedin, State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled Compression Ignition engines, Energy Conversion and Management, 76 (2013) 400-420. (ISI-Indexed)
A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, S.M. Palash, Impact of palm, mustard, waste cooking oil and Calophyllum inophyllum biofuels on performance and emission of CI engine, Renewable and Sustainable Energy Reviews, 27 (2013) 664-682. (ISI-Indexed)
A.S. Silitonga, H.H. Masjuki, T.M.I. Mahlia, H.C. Ong, W.T. Chong, Experimental study on performance and exhaust emissions of a diesel engine fuelled with Ceiba pentandra biodiesel blends, Energy Conversion and Management, 76 (2013) 828-836. (ISI-Indexed)
H.H. Masjuki, M.A. Kalam, M. Mofijur, M. Shahabuddin, Biofuel: Policy, Standardization and Recommendation for Sustainable Future Energy Supply, Energy Procedia, 42 (2013) 577-586. (ISI/SCOPUS Indexed Publication)
M. Mofijur, H.H. Masjuki, M.A. Kalam, A.E. Atabani, M. Shahabuddin, S.M. Palash, M.A. Hazrat, Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: A review, Renewable and Sustainable Energy Reviews, 28 (2013) 441-455. (ISI-Indexed)
S.M.A. Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, H. Sajjad, Production of palm and Calophyllum inophyllum based biodiesel and investigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions, Energy Conversion and Management, 76 (2013) 362-367. (ISI-Indexed)
S.C. Pang, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, Liquid absorption and solid adsorption system for household, industrial and automobile applications: A review, Renewable and Sustainable Energy Reviews, 28 (2013) 836-847. (ISI-Indexed)
S. Liza , A. S. M. A. Haseeb , H. H. Masjuki & A. A Abbas (2013): The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum Lubricated Conditions, Tribology Transactions, 56:1, 130-140 (ISI-Indexed)
B. Rismanchi, R. Saidur, H.H. Masjuki, T.M.I. Mahlia. 2013. Modelling and Simulation to Determine the Potential Energy Savings by Implementing Cold Thermal Energy Storage System in Office Buildings. Energy conversion and management75:152-161 (ISI-Indexed)
Rizwanul Fattah, I.M., Masjuki, H.H., Liaquat, A.M., Ramli, R., Kalam, M.A. & Riazuddin, V.N. "Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions", Renewable and Sustainable Energy Reviews, vol18, p.552-567, 2013. (ISI/SCOPUS Indexed Publication)
Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production Renewable and Sustainable Energy Reviews, Volume 18, February 2013, Pages 211-245 A.E. Atabani, A.S. Silitonga, H.C. Ong, T.M.I. Mahlia, H.H. Masjuki, Irfan Anjum Badruddin, H. Fayaz (ISI/SCOPUS Indexed Publication)
Silitonga, A. S., Ong, H. C., Mahlia, T. M. I., Masjuki, H. H. and Chong, W. T. 2013.Characterization and production of Ceiba pentandra biodiesel and its blends. Fuel, 108, 855-858. (ISI-Indexed)
Shafie, S. M., Mahlia, T. M. I. and Masjuki, H. H. 2013. Life cycle assessment of rice straw co-firing with coal power generation in Malaysia. Energy, 57, 1 August 2013: 284-294. (ISI-Indexed)
Imran, A., Varman, M., Masjuki, H. H. and Kalam, M. A. 2013. Review on alcohol fumigation on diesel engine: A viable alternative dual fuel technology for satisfactory engine performance and reduction of environment concerning emission. Renewable and Sustainable Energy Reviews, 26, October 2013: 739-751. (ISI-Indexed)
Atabani, A. E., Mahlia, T. M. I., Masjuki, H. H., Badruddin, I. A., Yussof, H. W., Chong, W. T. and Lee, K. T. A comparative evaluation of physical and chemical properties of biodiesel synthesized from edible and non-edible oils and study on the effect of biodiesel blending. Energy. (ISI-Indexed)
Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Hazrat, M. A., Varman, M., Mofijur, M. and Shahabuddin, M. 2013. Effect of Coconut Biodiesel Blended Fuels on Engine Performance and Emission Characteristics. Procedia Engineering, 56(2013), 583-590. (ISI/SCOPUS Indexed Publication)
Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fazal, M. A., Khan, A. F., Fayaz, H. and Varman, M. 2013. Impact of palm biodiesel blend on injector deposit formation. Applied Energy, 111, November 2013: 882-893 (ISI-Indexed)
Zulkifli NWM, Kalam MA, Masjuki HH, Shahabuddin M, Yunus R. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy. 2013, vol54, p.167-173. (ISI-Indexed)
Shahabuddin, M., Masjuki, H. H. and Kalam, M. A. (2013) 'Experimental Investigation into Tribological Characteristics of Bio-Lubricant Formulated from Jatropha Oil', Procedia Engineering, 56(0), 597-606. (ISI/SCOPUS Indexed Publication)
Chew, K. V., Haseeb, A. S. M. A., Masjuki, H. H., Fazal, M. A., & Gupta, M. Corrosion of magnesium and aluminum in palm biodiesel: A comparative evaluation. Energy(0). doi: http://dx.doi.org/10.1016/j.energy.2013.04.067 (ISI-Indexed)
Mofijur, M., Atabani, A. E., Masjuki, H. H., Kalam, M. A., & Masum, B. M. (2013). A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation. Renewable and Sustainable Energy Reviews, 23(0), 391-404. doi: http://dx.doi.org/10.1016/j.rser.2013.03.009 (ISI-Indexed)
Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Atabani, A. E., & Chong, W. T. (2013). A global comparative review of biodiesel production from jatropha curcas using different homogeneous acid and alkaline catalysts: Study of physical and chemical properties. Renewable and Sustainable Energy Reviews, 24(0), 514-533. doi: http://dx.doi.org/10.1016/j.rser.2013.03.044 (ISI-Indexed)
Silitonga, A. S., Ong, H. C., Masjuki, H. H., Mahlia, T. M. I., Chong, W. T., & Yusaf, T. F. Production of biodiesel from Sterculia foetida and its process optimization. Fuel(0). doi: http://dx.doi.org/10.1016/j.fuel.2013.03.051 (ISI-Indexed)
Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Chong, W. T., & Boosroh, M. H. (2013). Overview properties of biodiesel diesel blends from edible and non-edible feedstock. Renewable and Sustainable Energy Reviews, 22(0), 346-360. doi: http://dx.doi.org/10.1016/j.rser.2013.01.055 (ISI-Indexed)
Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., & Sajjad, H. (2013). Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles – A review. Energy Conversion and Management, 74(0), 171-182. doi: http://dx.doi.org/10.1016/j.enconman.2013.05.019 (ISI-Indexed)
M.J. Abedin, H.H. Masjuki, M.A. Kalam, A. Sanjid, S.M. Ashrafur Rahman, B.M. Masum, 2013. Energy balance of internal combustion engines using alternative fuels. Renewable and Sustainable Energy Reviews,26(0):20–33. http://dx.doi.org/10.1016/j.rser.2013.05.049 (ISI-Indexed)
Masum, B. M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Palash, S. M., & Abedin, M. J. (2013). Effect of ethanol–gasoline blend on NOx emission in SI engine. Renewable and Sustainable Energy Reviews, 24(0), 209-222. doi: http://dx.doi.org/10.1016/j.rser.2013.03.046 (ISI-Indexed)
Ong, H. C., Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Chong, W. T., & Boosroh, M. H. (2013). Production and comparative fuel properties of biodiesel from non-edible oils: Jatropha curcas, Sterculia foetida and Ceiba pentandra. Energy Conversion and Management, 73(0), 245-255. doi: http://dx.doi.org/10.1016/j.enconman.2013.04.011 (ISI-Indexed)
Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Imtenan, S., & Sajjad, H. (2013). Fuel properties, engine performance and emission characteristic of common biodiesels as a renewable and sustainable source of fuel. Renewable and Sustainable Energy Reviews, 22(0), 133-147. doi: http://dx.doi.org/10.1016/j.rser.2013.01.046 (ISI-Indexed)
Hussan, M. J., Hassan, M. H., Kalam, M. A., & Memon, L. A. (2013). Tailoring key fuel properties of diesel biodiesel ethanol blends for diesel engine. Journal of Cleaner Production, 51(0), 118-125. doi: http://dx.doi.org/10.1016/j.jclepro.2013.01.023 (ISI-Indexed)
Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Bhuiya, M. M. K., & Mehat, H. (2013). Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil). Industrial Crops and Products, 47, 323-330. (ISI-Indexed)
Zulkifli, N. W. M., Kalam, M. A., Masjuki, H. H., & Yunus, R. (2013). Experimental Analysis of Tribological Properties of Biolubricant with Nanoparticle Additive. Procedia Engineering, 68(0), 152-157. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.161 (SCOPUS-Indexed)
Alam, T., Mahmud, K. H. A. A., Hasan, M. F., Shahir, S. A., Masjuki, H. H., Kalam, M. A., . . . Mobarak, H. M. (2013). Effect of Magnesia on Zinc Oxide Stabilized Nano Alumina Ceramic Powder in Sintering Process and its Impact on Mechanical Properties. Procedia Engineering, 68(0), 723-729. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.245 (SCOPUS-Indexed)
Asrul, M., Zulkifli, N. W. M., Masjuki, H. H., & Kalam, M. A. (2013). Tribological Properties and Lubricant Mechanism of Nanoparticle in Engine Oil. Procedia Engineering, 68(0), 320-325. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.186 (SCOPUS-Indexed)
Al Mahmud, K. A. H., Zulkifli, N. W. M., Masjuki, H. H., Varman, M., Kalam, M. A., Mobarak, H. M., . . . Shahir, S. A. (2013). Working Temperature Effect of A- C: H/A-C: H and Steel/Steel Contacts on Tribo Properties in Presence of Sunflower Oil as a Bio Lubricant. Procedia Engineering, 68(0), 550-557. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.220 (SCOPUS-Indexed)
Imran, A., Masjuki, H. H., Kalam, M. A., Varman, M., Hasmelidin, M., Mahmud, K. A. H. A., . . . Habibullah, M. (2013). Study of Friction and Wear Characteristic of Jatropha Oil Blended Lube Oil. Procedia Engineering, 68(0), 178-185. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.165 (SCOPUS-Indexed)
Mofijur, M., Masjuki, H. H., Kalam, M. A., & Atabani, A. E. Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective. Energy(0)(In Press, Corrected Proof). doi: http://dx.doi.org/10.1016/j.energy.2013.02.059 (ISI-Indexed)
M Palash, S., Kalam, M. A., Masjuki, H. H., Masum, B. M., Rizwanul Fattah, I. M., & Mofijur, M. (2013). Impacts of biodiesel combustion on NOx emissions and their reduction approaches. Renewable and Sustainable Energy Reviews, 23(0), 473-490. doi: http://dx.doi.org/10.1016/j.rser.2013.03.003 (ISI-Indexed)
Fazal, M. A., Haseeb, A. S. M. A. & Masjuki, H. H. 2013. Corrosion mechanism of copper in palm biodiesel, Corrosion Science 67 (2013) 50-59. (ISI-Indexed)
Fazal, M. A., Haseeb, A. S. M. A., Masjuki, H. H. 2013. Investigation of Friction and Wear Characteristics of Palm Biodiesel, Energy Conversion and Management 67 (2013) 251- 256 (ISI-Indexed)
Hassan, M. H. and Kalam, M. A. 2013. An Overview of Biofuel as a Renewable Energy Source: Development and Challenges. Procedia Engineering 56, 39-53. (ISI/SCOPUS Indexed Publication)
Shahabuddin, M.,Liaquat,A.M.,Masjuki,H.H.,Kalam, M.A, Mofijur,M.,2013.Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel. Renewable and Sustainable Energy Reviews, 21:623-632 (ISI-Indexed)
Atabani, A. E., Badruddin, I. A., Mahlia, T. M. I., Masjuki, H. H., Mofijur, M., Lee, K. T., Chong, W. T. 2013. Fuel Properties of Croton megalocarpus, Calophyllum inophyllum, and Cocos nucifera (coconut) Methyl Esters and their Performance in a Multicylinder Diesel Engine Energy Technology. (Tier N, Impact Factor = N/A) (ISI-Indexed)

2012

Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., 2012. Experimental analysis on engine performance and emission characteristics using biodiesel obtained from non-edible oil. International Review of Mechanical Engineering 6(3): 659-665. (SCOPUS-Indexed)
H.G. How, Y.H. Teoh, H.H. Masjuki, M.A. Kalam,2012. Impact of coconut oil blends on particulate-phase PAHs and regulated emissions from a light duty diesel engine, Energy, 48(1):500-509, ISSN 0360-5442,http://dx.doi.org/10.1016/j.energy.2012.10.009 (ISI-Indexed)
Hasan, M. M., Haseeb, A. S. M. A., Masjuki, H. H. 2012. Structural and mechanical properties of nanostructured tungsten oxide thin films. Surface Engineering, 28(10):778-785. (ISI-Indexed)
J.U. Ahamed, N.A. Madlool, R. Saidur, M.I. Shahinuddin, A. Kamyar, H.H. Masjuki,2012. Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters, Energy, 46(1):664-674, ISSN 0360-5442, 10.1016/j.energy.2012.06.074. (ISI-Indexed)
AHAMED, J. U., SAIDUR, R., MASJUKI, H. H. & SATTAR, M. A. 2012. AN ANALYSIS OF ENERGY, EXERGY, AND SUSTAINABLE DEVELOPMENT OF A VAPOR COMPRESSION REFRIGERATION SYSTEM USING HYDROCARBON. International Journal of Green Energy, 9(7):702-717. (ISI-Indexed)
Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., Shahabuddin, M., Mofijur, M. 2012. Application of blend fuels in a diesel engine. Energy Procedia Volume 14, 2012, Pages 1124-1133. (SCOPUS-Indexed)
SHAHABUDDIN, M., KALAM, M. A., MASJUKI, H. H., BHUIYA, M. M. K. & MOFIJUR, M. 2012. An experimental investigation into biodiesel stability by means of oxidation and property determination. Energy, 44, 616- 622. (ISI-Indexed)
Bhuiya, MMK; Chowdhury, MSU ; Ahamed, JU; Khan, MJH; Sarkar, MAR ; Kalam, MA; Masjuki, HH ; Shahabuddin, M (2012) Heat transfer performance for turbulent flow through a tube using double helical tape inserts. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER 39(6):818-825 (ISI-Indexed)
RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53:117-126. (ISI-Indexed)
Shafie, S.M., Mahlia, T.M.I., Masjuki, H.H., Ahmad-Yazid, A.(2012)A review on electricity generation based on biomass residue in Malaysia. Renewable and Sustainable Energy Reviews 16 (8) , pp. 5879-5889 (ISI-Indexed)
Ong, H.C., Mahlia, T.M.I., Masjuki, H.H., Honnery, D. 2012.Life cycle cost and sensitivity analysis of palm biodiesel production. Fuel 98 , pp. 131-139 (ISI-Indexed)
Adnan, R., Masjuki, H.H.& Mahlia, T.M.I.2012. Performance and emission analysis of hydrogen fueled compression ignition engine with variable water injection timing.ENERGY 43 (1) Pages: 416-426 (ISI-Indexed)
J.U. Ahamed, R Saidur, H. H. Masjuki and M.A. Sattar, Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator, Energy Education Science and Technology Part A: Energy Science and Research, 2012, 29(1): 597- 610. (ISI-Cited, Q1, IF = 9.33). (ISI-Indexed)
M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam,(2012), Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts.International Communications in Heat and Mass Transfer, Volume 39, Issue 1,Pages 94-101 (ISI-Indexed)
M. Mofijur, H.H.Masjuki, M.A.Kalam, M.A.Hazrat, A.M.Liaquat, M.Shahabuddin, M.Varman. 2012. Prospects of biodiesel from Jatropha in Malaysia. Renewable and Sustainable Energy Reviews 16(2012)5007¿5020 (ISI-Indexed)
M. M. K. Bhuiya, J. U. Ahamed, M. A. R.. Sarkar, B. Salam, R. Saidur, A. S. M. Sayem, M. A. Kalam, Heat transfer and pressure drop characteristics in turbulent flow through a tube, Experimental Heat Transfer, Vol. 25, issue 4, pp. 301-322. (ISI/SCOPUS Indexed Publication)
Rismanchi, B., Saidur, R., Masjuki, H.H., Mahlia, T.M.I.2012.Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings. 50 (2012) 347 354. (ISI/SCOPUS Indexed Publication)
Bushroa, A.R., Rahbari, R.G., Masjuki, H.H., Muhamad, M.R.2012. Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum. Volume 86, Issue 8, Pages 1107 1112 (ISI-Indexed)
Haque A.; Lim B. H.; Haseeb A. S. M. A.; Masjuki,H. H.,(2012), Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS Volume: 23, Issue:1, Pages:115-123. (ISI-Indexed)
Shahabuddin, M., Masjuki, H.H., Kalam, M.A., Mofijur, M., Hazrat, M.A., Liaquat, A.M. 2012. Effect of additive on performance of C.I. engine fuelled with bio diesel. Energy Procedia 14 , pp. 1624-1629 (ISI-Indexed)
Mofijur, M., Masjuki, H.H., Kalam, M.A., Shahabuddin, M., Hazrat, M.A., Liaquat, A.M. 2012. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear. Energy Procedia 14 , pp. 1748-1753 (ISI-Indexed)
Kalam, M.A., Ahamed, J.U., Masjuki, H.H.2012. Land availability of Jatropha production in Malaysia.Renewable and Sustainable Energy Reviews Volume 16, Issue 6, Pages 3999-4007 (ISI-Indexed)
Fazal, M. A., Haseeb, A. S. M. A. & Masjuki. H. H. 2012. Degradation of automotive materials in palm biodiesel. Energy 40:76-83. (ISI-Indexed)
W.B.W. Nik, A.F. Ayob, S. Syahrullail, H.H. Masjuki, & M.F. Ahmad, 2012. THE EFFECT OF BORON FRICTION MODIFIER ON THE PERFORMANCE OF BRAKE PADS. International Journal of Mechanical and Materials Engineering (ISSN 1823-0334),7(1): 31-35. (SCOPUS-Indexed)
Pang S.C., Masjuki H.H., Kalam M.A., Hazrat,M.A. 2012. A Review on Air Flow and Coolant Flow Circuit in Vehicles Cooling System, Int. J. Heat & Mass Trans., 55(24): 6295 6306. (ISI-Indexed)
Md. Hazrat Ali, H. H. Masjuki, M. A. Kalam, Pang S. C., A.M. Liaquat, Irfan Magami, 2012. Determination of Time Variant 1D-3D Temperature and Heat Transfer Distribution Inside The Cooling Jacket of A SI Engine Cooling System After Key-Off, SAE Technical Paper 2012-01-0642, 2012, doi:10.4271/2012-01-0642. (Non-ISI/Non-SCOPUS)
Kovoor,P. P.,Idris,M. R., Masjuki, H. H.,Yahya, T. F. T., 2012. A study conducted on the impact of effluent waste from machining process on the environment by water analysis. International Journal of Energy and Environmental Engineering,3:21 (Non-ISI/Non-SCOPUS)
H.C. Ong, T.M.I. Mahlia, H.H. Masjuki,(2012),A review on energy pattern and policy for transportation sector in Malaysia, Renewable and Sustainable Energy Reviews, Volume 16, Issue 1,Pages 532-542 (ISI-Indexed)
Pang,S.C., Kalam,M.A.,Masjuki, H.H.,Badruddin, I.A. & Hazrat,M.A. 2012. Design Improvements of Engine Cooling System Using CFD And 1D Thermo-Fluid Model: Medium Driving Speed and Keyed-Off Conditions.Engineering e-Transaction (ISSN 1823-6379), 7(2):127-134. (Non-ISI/Non-SCOPUS)
Atabani, A.E., Silitonga, A.S., Badruddin, I.A., Mahlia, T.M.I., Masjuki, H.H., Mekhilef, S.2012. A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renewable and Sustainable Energy Reviews. Volume 16, Issue 4,Pages 2070-2093 (ISI-Indexed)
S.C. Pang, M.A. Kalam, H.H. Masjuki, I.A. Badruddin, Rahizar Ramli, M.A. Hazrat, 2012. “Underhood Geometry Modification and Transient Coolant Temperature Modelling for Robust Cooling Networks”, International Journal of Mechanical and Materials Engineering (IJMME), (ISSN 1823-0334), Vol.7(3):251-258. (SCOPUS-Indexed)
M.A. Hazrat, H.H. Masjuki, M.A. Kalam, I.A. Badruddin, Rahizar Ramli & S.C. Pang, 2012. “Steady state analysis of coolant temperature distribution in a spark ignition engine cooling jacket”, International Journal of Mechanical and Materials Engineering (IJMME), (ISSN 1823-0334), Vol.7(3:243-250 (SCOPUS-Indexed)
M. Shahabuddin, M.A. Kalam, H. H. Masjuki, M. Mofijur. “Tribological characteristics of amine phosphate and octylated/butylated diphenylamine additives infused bio-lubricant”. Energy education science and technology Part A: Energy Science and Research 2012, 30(1): 89-102 (ISI-Indexed)
Mofijur, M., Masjuki, H. H., Kalam, M. A., Shahabuddin, M., Hazrat, M. A., Liaquat, A. M. 2012. Palm Oil Methyl Ester and Its Emulsions Effect on Lubricant Performance and Engine Components Wear (ISI-Indexed)
Shafie, S. M., Mahlia, T. M. I., Masjuki, H. H., Rismanchi, B. 2012. Life cycle assessment (LCA) of electricity generation from rice husk in Malaysia (ISI-Indexed)
Rismanchi, B., Saidur, R., Masjuki, H. H., Mahlia, T. M. I. 2012. Cost-benefit analysis of using cold thermal energy storage systems in building applications (ISI-Indexed)
Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Mofijur, M., Hazrat, M. A., Liaquat, A. M. 2012. Effect of Additive on Performance of CI Engine Fuelled with Bio Diesel (ISI-Indexed)

2011

HUSNAWAN, M., MASJUKI, H. H. & MAHLIA, T. M. I. 2011. The interest of combining two additives with palm olein as selected lubricant components. Industrial Lubrication and Tribology, 63(3), 203-209. (ISI-Indexed)
Jayed, M. H., Masjuki, H. H., Kalam, M. A., Mahlia, T. M. I., Husnawan, M., & Liaquat, A. M. (2011). Prospects of dedicated biodiesel engine vehicles in Malaysia and Indonesia. Renewable and Sustainable Energy Reviews, 15(1), pp. 220-235. (ISI-Indexed)
Shafie, S. M., Mahlia, T. M. I., Masjuki, H. H., & Andriyana, A. 2011. Current energy usage and sustainable energy in Malaysia: A review. Renewable and Sustainable Energy Reviews, 15(9): 4370-4377. (Q1) (ISI-Indexed)
FAZAL, M. A., HASEEB, A. S. M. A. & MASJUKI, H. H. (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92(11), 2154-2159. (ISI-Indexed)
Haseeb, A. S. M. A., Jun, T. S., Fazal, M. A. & Masjuki, H. H. 2011. Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36(3), 1814-1819. (ISI-Indexed)
S. Liza, A.S.M.A. Haseeb, A.A. Abbas, H.H. Masjuki. 2011. Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis; 18:1415-1423 (ISI-Indexed)
Ong, H.C., T.M.I. Mahlia, H.H. Masjuki, and R.S. Norhasyima, Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: A review. Renewable and Sustainable Energy Reviews, 2011. 15(8): p. 3501-3515. (ISI-Indexed)
M.M. Hasan, A.S.M.A. Haseeb, H.H. Masjuki, (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by RF reactive magnetron sputtering, Surface Engineering (Maney Publishing), Vol. 27(5), pp. 382-388. (ISI-Indexed)
Kalam, M.A. and H.H. Masjuki, An experimental investigation of high performance natural gas engine with direct injection. Energy, 2011. 36(5): p. 3563- 3571. (ISI-Indexed)
Fazal, M.A., A.S.M.A. Haseeb, and H.H. Masjuki, Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 2011. 36(5): p. 3328-3334. (ISI-Indexed)
A.R. Bushroa, H.H. Masjuki, M.R. Muhamad,2011. PARAMETER OPTIMIZATION OF SPUTTERED Ti INTERLAYER USING TAGUCHI METHOD, International Journal of Mechanical and Materials Engineering (ISSN 1823-0334),Volume 6(2). (SCOPUS-Indexed)
Adnan, R., Masjuki, H. H. & Mahlia, T. M. I. 2011. Mathematical modeling on the effect of equivalence ratio in emission characteristics of compression ignition engine with hydrogen substitution. Applied Mathematics and Computation, 217(13), 6144-6158. (ISI-Indexed)
M.A. Kalam, H.H. Masjuki, M. Varman, A.M. Liaquat,2011. FRICTION AND WEAR CHARACTERISTICS OF WASTE VEGETABLE OIL CONTAMINATED LUBRICANTS, International Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Volume 6(3). (SCOPUS-Indexed)
Ong, H.C., T.M.I. Mahlia, and H.H. Masjuki, A review on emissions and mitigation strategies for road transport in Malaysia. Renewable and Sustainable Energy Reviews, 2011. 15(8): p. 3516-3522. (ISI-Indexed)
N.W.M. Zulkifli, M.A.Kalam, R. Yunus, H.H. Masjuki,2011. ANTI-WEAR CHARACTERISTICS OF JATROPHA TRIMETHYLOLPROPANE (TMP) ESTER.Engineering e-Transaction (ISSN 1823-6379) Volume 6(2) (Non-ISI/Non-SCOPUS)
Ahamed J. U., Saidur R. & Masjuki H. H. 2011. A review on exergy analysis of vapor compression refrigeration system, Renewable and Sustainable Energy Reviews, 3(15): 1593-1600. (ISI-Indexed)
Silitonga, A. S., Atabani, A. E., Mahlia, T. M. I., Masjuki, H. H., Badruddin, I. A., & Mekhilef, S. 2011. A review on prospect of Jatropha curcas for biodiesel in Indonesia. Renewable and Sustainable Energy Reviews, 15(8): 3733-3756. (ISI-Indexed)
Ahamed, J. U., Saidur, R., Masjuki, H. H., Mekhilef, S., Ali, M. B., & Furqon, M. H. 2011. An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39(12): 7922-7929. (ISI-Indexed)
Hasanuzzaman M., Saidur R. & Masjuki, H. H., (2011), Effects of different variables on moisture transfer of household refrigerator-freezer, Energy Education Science and Technology Part A: Energy Science and Research, 27(2): pp. 401-418. (ISI-Indexed)
Mahlia, T. M. I., Saidur, R., Yanti, P. a. A. & Masjuki, H. H., 2011. Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Education Science and Technology Part a-Energy Science and Research, 27(1), 95-104. (ISI-Indexed)
Ong, H. C., Mahlia, T. M. I., & Masjuki, H. H. (2011). A review on energy scenario and sustainable energy in Malaysia. Renewable and Sustainable Energy Reviews, 15(1), 639-647. (ISI-Indexed)
TAJALLY, M., HUDA, Z. & MASJUKI, H. H. 2011. Effect of deformation and recrystallization conditions on tensile behavior of aluminum alloy 7075. Metal Science and Heat Treatment, 53, 165-168. (ISI-Indexed)
Kalam, M. A. & Masjuki, H. H. 2011. Design, modifiaction and test of a new catalytic converter for natural gas fueled engines. Arabian journal for science and engineering, 5(36): 677-688. (ISI-Indexed)
AHMED, A. S., HAMDAN, S., MASJUKI, H. H. & MAKINO, K. 2010. Efficient Conversion of Xylose and Glucose as Solid Biomass to Bioethanol by Recombinant Yeast. The Journal of the Institute of Engineers, Malaysia, 72, 36-43. (Non-ISI/Non-SCOPUS)
Bushroa, A.R., H.H. Masjuki, M.R. Muhamad, and B.D. Beake,2011. Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering. Surface & Coatings Technology, 206(7):1837- 1844. (ISI-Indexed)
Fazal, M. A., Haseeb, A. S. M. A. & Masjuki, H. H. 2011. Biodiesel feasibility study: An evaluation of material compatibility; performance; emission and engine durability. Renewable and Sustainable Energy Reviews, 15, 1314-1324. (ISI-Indexed)
Haseeb, A., Fazal, M. A., Jahirul, M. I. & Masjuki, H. H. 2011. Compatibility of automotive materials in biodiesel: A review. Fuel 90(3): 922-931. (ISI-Indexed)
Kalam, M. A., Masjuki, H. H., Jayed, M. H. & Liaquat, A. M. 2011. Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil. Energy, 36, 397-402 (ISI Q1). (ISI-Indexed)

2010

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperature on Optical properties of RF-sputtered TiO2. Optical Materials 32(6):690-695. DOI:10.1016/j.optmat.2009.07.011. (ISI-Indexed)
M.M. Hasan, A.S.M.A. Haseeb, R. Saidur ,H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperatures on Optical Properties of RF-sputtered TiO2 Thin Films. Optical Materials 32(6):690-695. (ISI/SCOPUS Indexed Publication)
R. Saidur n, J.U. Ahamed, H.H. Masjuki.(2010).Energy, exergy and economic analysis of industrial boilers, Energy Policy, 38(5):2188-2197. (ISI/SCOPUS Indexed Publication)
Aizura, A. B., Mahlia, T. M. I. & Masjuki, H. H. 2010.Potential fuel savings and emissions reduction from fuel economy standards implementation for motor-vehicles. Clean Technologies and Environmental Policy, 12: 255-263. (ISI/SCOPUS Indexed Publication)
Haseeb, A.S.M.A, Masjuki, H. H., Ann, L. J. & Fazal, M. A. (2010). Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91(3):329-334. (ISI/SCOPUS Indexed Publication)
T. M. I. Mahlia, C. G. Hor, H. H. Masjuki, M. Husnawan, M. Varman and S. Mekhilef.(2010). CLOTHES DRYING FROM ROOM AIR CONDITIONING WASTE HEAT: THERMODYNAMICS INVESTIGATION, The Arabian Journal for Science and Engineering, 35(1B):339-351. (ISI-Indexed)
Tajally, M., Huda, Z. & Masjuki, H. H. (2010). A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering, 37(4):425-432. (ISI/SCOPUS Indexed Publication)
Mahlia, T. M. I., Saidur, R., Husnawan, M., Masjuki, H. H. & Kalam, M. A. (2010). An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part a-Energy Science and Research, 26(1):1-11. (ISI/SCOPUS Indexed Publication)
Jahirul M. I, Saidur R. and Masjuki H. H. Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 2, pp. 268-275. (SCOPUS-Indexed)
A. S. M. A. Haseeb, S. Y. Sia, M. A. Fazal, H. H. Masjuki, Effect of Temperature on Tribological Properties of Palm Biodiesel, Energy, 2010. vol.35 (3):1460-1464 (ISI-Indexed)
A.S. Ahmed, S. Khan, S. Hamdan, R. Rahman, A. Kalam, H.H. Masjuki, T.M.I. Mahlia, 2010. Biodiesel Production from Macro Algae as a Green Fuel for Diesel Engine. Journal of Energy & Environment (Non-ISI/Non-SCOPUS)
Memon, L. A., Kalam, M. A., Masjuki, H. H. & Jayed, M. H.2010. Potential Emissions Reduction in Road Transport Sector Using Biofuel in Developing Countries. Atmospheric Environment, 44, 3869-3877. (ISI/SCOPUS Indexed Publication)
R. Adnan, H.H. Masjuki and T.M.I. Mahlia(2010), EXPERIMENTAL INVESTIGATION ON IN-CYLINDER PRESSURE AND EMISSIONS OF DIESEL ENGINE WITH PORT INJECTION HYDROGEN SYSTEM, International Journal of Mechanical and Materials Engineering (IJMME), Vol.5, No.2, 136-141. (SCOPUS-Indexed)
M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki (2010), Adhision and wear behavior of non-structured titanium oxide thin flims, International Journal of Mechanical and Materials Engineering(IJMME), 5(1), pp. 5-10. (SCOPUS-Indexed)
Fazal, M. A., Haseeb, A. S. M. A., & Masjuki, H. H. (2010). Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91(10), pp.1308-1315 (ISI-Indexed)
A.S.M.A. Haseeb, M.M. Hasan, H.H. Masjuki, (2010). Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering; Surface and Coatings Technology, 205(2), pp. 338-344. (ISI-Indexed)
J. U. Ahamed, R. Saidur, H. H. Masjuki (2010), Thermodynamic Performance Analysis Of R-600 And R-600a as Refrigerant, Engineering e-Transaction (ISSN 1823-6379) Vol. 5, No. 1, , pp 11-18. (Non-ISI/Non-SCOPUS)
Jahirul, M. I., Masjuki, H. H., Saidur, R., Kalam, M. A., Jayed, M. H. & Wazed, M. A.(2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30(14-15), 2219-2226. (ISI-Indexed)
Haseeb, A.S.M.A, Masjuki, H. H., Siang, C. T. & Fazal, M. A. 2010. Compatibility of elastomers in palm biodiesel. Renewable Energy, 35(10):2356-2361. (ISI/SCOPUS Indexed Publication)
J. U. Ahamed, M. M. K. Bhuiya, R. Saidur, H. H. Masjuki, M. A. R. Sarkar, A. S. M. Sayem and M. Islam (2010), Forced convection heat transfer performance of porous twisted tape insert, Engineering e-Transaction, Vol. 5, No. 2, pp 67-79. (Non-ISI/Non-SCOPUS)
R. Adnan, H.H. Masjuki and T.M.I. Mahlia (2010), Computational Simulation On Emissions Of Hydrogen Fueled Compression Ignition Engine With Variable Combustion Temperature, International Journal of Mechanical and Materials Engineering (IJMME), Vol.5 No.2, 251-259. (SCOPUS-Indexed)

2009

Saidur R, Rahim N.A, Masjuki H.H, Mekhilef S, Ping H.W. and Jamaluddin M.F, End use energy analysis in Malaysia industrial sector, Energy, Volume 34, Issue 2, February 2009, Pages 153-158 (ISI/SCOPUS Indexed Publication)
M. Hasanuzzaman, R. Saidur and H. H. Masjuki, Effects of operating variables on heat transfer and energy consumption of household refrigerator-freezer during the closed door operation, Energy, Volume 34, Issue 2, February 2009, Pages 196-198 (ISI/SCOPUS Indexed Publication)
Saidur R, Rahim N.A, Ping H.W., M.I. Jahirul, Mekhilef S and Masjuki H.H., Energy and emission analysis for industrial motors in Malaysia, (2009) Energy Policy,37 (9),pp.3650-3658. (ISI/SCOPUS Indexed Publication)
Mahlia, T.M.I., Husnawan, M., Masjuki, H.H., Remuslara, L., Saidur, R., Energy savings potential by substituting driving with walking and cycling for short distance (2009) ASME International Mechanical Engineering Congress and Exposition, Proceedings,7, pp. 3-7. (ISI-Indexed)
M.A. Kalam, H.H. Masjuki, T.M.I. Mahlia, A. Ishak and M. Khair, A. Shahrir and A.Yusof, Experimental test of a new compressed natural gas direct injection engine, Journal of Energy and Fuel, ACS, USA, 2009 (ISI-Indexed)
Jahirul MI, Saidur R, Masjuki HH, Kalam MA and Rashid MM. Application of artificial neural networks (ANN) for prediction the performance of a dual fuel internal combustion engine. HKIE Transactions. vol 16 No 1, March 2009 (SCOPUS-Indexed)
Mahlia, T.M.I., Husnawan, M., Masjuki, H.H., Chow, K.V., Low, T.S., Liaw, A.W.J., Energy analysis of cooling pump in internal combustion engine (2009) ASME International Mechanical Engineering Congress and Exposition, Proceedings, 8, pp. 249-253. (ISI/SCOPUS Indexed Publication)
M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah. Thermal analysis of cyclinder head carbon deposits from single cylinder diesel engine fueled by palm oil-diesel fuel emulsions,Oct. 2009, J. of Applied Energy, Elsevier,Vol: 86,Issue:10,pp: 2107-2113. (ISI/SCOPUS Indexed Publication)
M.H. Jayed, H.H. Masjuki, R. Saidur, M. A. Kalam & Jahirul, M. I. (2009) ENVIRONMENTAL ASPECTS AND CHALLENGES OF OILSEED PRODUCED BIODIESEL IN SOUTHEAST ASIA. Renewable and Sustainable Energy Reviews,13 (9),pp.2452-2462. (ISI/SCOPUS Indexed Publication)
M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, S. Mekhilef, M.G. Saifullah, Interest of Using Metal-Based Additive and Oxygenated Additive Combination as a Biodiesel- Diesel Blends Post-flame Additive, 2009, JSIR-NISCAIR
A.B. Aizura, T.M.I. Mahlia, H.H. Masjuki. Potential fuel savings and emissions reduction from fuel economy standards implementation for motor vehicle, Clean Technologies and Environmental Policy, Springer, 2009, pp.1-9. (SCOPUS-Indexed)
M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah, M.A. Kalam, The use of dihydroxy fatty acid and palm-based polyol as selected componens of envo-diesel fuel blends to reduce C.I engine gaseous emissions and carbon deposits, SAE Paper: 2009-211- 0284 (Non-ISI/Non-SCOPUS)
M.M. Hasan, A.S.M.A. Haseeb, R. Saidur , H.H. Masjuki,M. Hamdi, (2009) Synthesis and Annealing of Nanostructured TiO2 Films by Radio-frequency Magnetron Sputtering, Journal of Applied Sciences, vol. 9, Issue 15, pp. 2815-2821, ISSN 1812-5654. (SCOPUS-Indexed)
Tajally, M., Huda, Z., Masjuki, H.H., Effect of cold rolling on bending and tensile behavior of 7075 aluminum alloy (2009) Journal of Applied Sciences, 9 (21), pp. 3888-3893. (SCOPUS-Indexed)
Saidur, R., Masjuki, H.H., Hasanuzzaman, M., Performance of an improved solar car ventilator (2009) International Journal of Mechanical and Materials Engineering, 4 (1), pp. 24-34. (SCOPUS-Indexed)
Hasan, M.M., Haseeb, A.S.M.A., Saidur, R., Masjuki, H.H., Johan, M.R. Structural, optical and morphological properties of TiO2/Ag/ TiO2 multilayer films(2009) AIP Conference Proceedings, 1136, pp. 229- 233. (ISI/SCOPUS Indexed Publication)
Saidur R, Sattar M.A, Masjuki H.H and Jamaluddin M.Y. Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy & Environment, vol. 20, No. 4, 2009, pp 533-551. (SCOPUS-Indexed)
Tajally, M., Huda, Z., Masjuki, H. H. 2009. Effect of cold rolling on bending and tensile behavior of 7075 aluminum alloy Journal of Applied Sciences (SCOPUS-Indexed)
A. G. Jaharah, I. A. Choudhury,H.H. Masjuki and C. H. Che Hassan, Surface Integrity Of AISI H13 Tool Steel In End Milling Process, International Journal of Mechanical and Materials Engineering, 2009, vol. 4, no.1, pp. 88 -92. (SCOPUS-Indexed)
Saidur R, Hasanuzzaman. M, Hasan M.M. and Masjuki H.H, (2009) Overall Thermal Transfer Value of Residential Buildings in Malaysia, Journal of Applied Sciences, vol. 9, Issue 11, pp. 2130-2136,ISSN1812-5654. (SCOPUS-Indexed)
M.A. Kalam, H.H. Masjuki, M. Redzuan, T. I. Mahlia, M. A.Fuad, M. Mohibah, K.H. Halim, A.Ishak,M.Khair, A.Shahrir and A.Yusoff, Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine, Int. Journal Sadhana, Indian Academy of Sciences, vol. 34, Part 3, June 2009, pp.1-15. (ISI/SCOPUS Indexed Publication)
Hasanuzzaman, M., Saidur, R., Masjuki, H. H. 2009. Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation Energy (SCOPUS-Indexed)
Husnawan, M; Masjuki, HH; Mahlia, TMI, S. Mekhilef, M.G. Saifullah ¿Use of post flame metal-based and oxygenated additive combination for biodiesel-diesel blends¿ Journal of Scientific & Industrial Research Vol. 68 issue 12, 2009, pp. 1049-1052 (ISI-Indexed)

2008

H. Abdesselam, H. H. Masjuki, R. Saidur Rahman and M. Guellal, Performance study of water-to-water heat pump using non-Azeotropic refrigerant mixtures R407C, International Energy Journal, 2008, Vol. 9, Issue 4, pp. 267-274. (Non-ISI/Non-SCOPUS)
R. Saidur and H H Masjuki, Application of Artificial Neural Networks to Investigate the Energy Performance of Household Refrigerator-freezers, Journal of Applied Sciences, 8 (11), 2008, pp. 2124-2129 (SCOPUS-Indexed)
R. Saidur, M. M. Hasan, A.S.M.A. Haseeb, H. H. Masjuki, Energy-efficient optical coating for flat glass, Journal of Applied Sciences,2008,Vol. 8, No. 10, pp. 1883-1890. (SCOPUS-Indexed)
M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A. Ishak and M. Khair, A. Shahrir and A.Yusoff, Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine, SAE paper no. 2008-01-1550, USA. (Non-ISI/Non-SCOPUS)
Saidur R, Masjuki H.H, C.Y. Tan, J.K. Ooi, P.H. Yoon, Performance investigation of a solar powered thermoelectric refrigerator, International Journal of Mechanical and Materials Engineering, Vol. 3, Issue 1, 2008, pp. 7-16. (SCOPUS-Indexed)
M.J. Ghazali, W.M. Rainforth, S. Abdullah, A.K.A. Ihsan and Masjuki Hassan, Subsurface deformation of worn Al-Cu and Al-Mg Alloys, Advanced Materials Research, vols. 33-34, 2008, pp. 483- 488. (SCOPUS-Indexed)
Kalam, M.A., H H Masjuki, Saifullah, M.G., Seng, T.B. Envo diesel test on automotive engine-an analysis of its performance and emission results. Int. Journal of Mechanical and Materials Engineering, 2008, vol. 3 No. 1, pp. 55-60. (SCOPUS-Indexed)
M A Kalam, M G Saifullah, H H Masjuki, M Husnawan and T M I Mahlia, PAH and other emissions from coconut oil blended fuels, Journal of Scientific & Industrial Research, CAIR Publisher, vol. 67 (11), November 2008, p. 1031-1035. (ISI/SCOPUS Indexed Publication)
R. Saidur, M.I. Jahirul, M. Hasanuzzaman and H.H. Masjuki, Analysis of exhaust emission of natural gas engine by using response surface methodology, Journal of Applied Science, 8(19), 2008, pp. 3328-3339. (SCOPUS-Indexed)
M.A. Kalam and H.H. Masjuki, Potential and properties of palm diesel as alternative fuel for Automotive engines, Int. Energy Journal, RERIC, vol. 9, March 2008, pp. 37-42. (Non-ISI/Non-SCOPUS)
Saidur R, and H H Masjuki, energy and associated emission analysis in office building, International Journal of Mechanical and Materials Engineering, vol. 3, Issue 1, 2008, pp. 90- 96. (SCOPUS-Indexed)

2007

Saidur R, Hasanuzzaman M., Sattar MA and Masjuki H.H, Open and Closed Door Moisture Transport and Corresponding Energy Consumption in Household Refrigerator, Journal of Energy and Environment,2007, Vol. 6, pp. 18-27.
Wan Nik, W. B., Maleque, M. A., Ani, F. N., & Masjuki, H. H. (2007). Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59(5), 200-208. (ISI-Indexed)
B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, R. Saidur, E. Niza Mohamad, Second law analysis for optimal thermal design of radial fin geometry by convection, Int. Journal of Applied Thermal Engineering, Elsevier Ltd., UK, vol. 27, 2007, pp. 1363-1370.
Mahlia, T.M.I., B.N. Taufiq, Ismail, H H Masjuki, Correlation between thermal conductivity and the thickness of selected insulation materials for building wall, Int. Journal of Energy and Building, Elsevier Science UK vol. 39, Issue 2, February 2007, pp. 182-187. (ISI-Indexed)
Saidur R, H H Masjuki and Jamaluddin M.Y, An application of energy and exergy analysis in residential sector of Malaysia, Int. Journal of Energy Policy, Elsevier Science UK, vol. 35, Issue 2, February 2007, pp. 1050-1063. (ISI/SCOPUS Indexed Publication)
Saidur R, Sattar MA, H H Masjuki, Abdesselam H and BS Shahruan, Energy and exergy analysis at the utility and commercial sectors of Malaysia, Energy Policy, vol.35, Issue 3, March 2007, pp.1956-1966. (ISI/SCOPUS Indexed Publication)
Saidur R, Sattar MA, Masjuki H.H, Ahmed S and U. Hashim, An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia, Int. Journal of Energy Policy, Elsevier Science UK, vol. 35, issue 8, August 2007, pp. 4018-4026.
Mahlia, T. M. I., Taufiq, B. N., Ismail, Masjuki, H. H. 2007. Correlation between thermal conductivity and the thickness of selected insulation materials for building wall Energy and Buildings (ISI-Indexed)
M. Husnawan, M.G. Saifullah and H.H. Masjuki, Development of friction force model for mineral oil basestock containing palm olein and antiwear additive, Journal of Tribology International, vol. 40, Issue 1, January 2007, pp. 74-81.

2006

H. Abdessalam, H H Masjuki, M. Guellal and S. Rahman, Performance evaluation of environmental friendly refrigerant for high temperature heat pumps, AMSE Best of Book 2006, pp. 16-25 (Non-ISI/Non-SCOPUS)
Varman, M; Mahlia, TM; H H Masjuki, Method for calculating annual energy efficiency improvement of TV sets, Int. Journal of Energy Policy, Elsevier Science UK, 2006, vol. 34, no. 15, pp. 2429-2432
Aslam, M. U., Masjuki, H. H., Kalam, M. A., Abdesselam, H., Mahlia, T. M. I., Amalina, M. A. 2006. An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle Fuel (SCOPUS-Indexed)
Varman, M., Mahlia, T. M. I., Masjuki, H. H. 2006. Method for calculating annual energy efficiency improvement of TV sets Energy Policy (SCOPUS-Indexed)
Saidur, R., Khaliq, A. H. A., Masjuki, H. H. 2006. Analysis of energy and exergy use for process heating in the industrial sector of Malaysia International Journal of Exergy (ISI-Indexed)
Varman, M., Mahlia, T. M. I., Masjuki, H. H. 2006. Method for calculating annual energy efficiency improvement of TV sets Energy Policy (ISI-Indexed)
M.U. Aslam, H.H. Masjuki, M.A. Kalam, H. Abdesselam, T.M.I. Mahlia and M.A. Amalina, An Experimental Investigation of CNG as an Alternative Fuel for a Retrofitted Gasoline Vehicle, FUEL (Int. Journal), Elsevier Science U.K, vol. 85, Issues 5-6, March 2006, pp. 717-724.
Saidur, R., Masjuki, H. H., Jamaluddin, M. Y., Yap, F. C. 2006. Actual usage conditions, energy savings and associated emission reductions of washing machines Transactions Hong Kong Institution of Engineers (SCOPUS-Indexed)
Saidur, R., Masjuki, H. H., Jamaluddin, M. Y. 2006. A new approach to investigate the energy performance of a household refrigerator-freezer International Energy Journal (SCOPUS-Indexed)
Aslam, M. U., Masjuki, H. H., Kalam, M. A., Abdesselam, H., Mahlia, T. M. I., Amalina, M. A. 2006. An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle Fuel (ISI-Indexed)

2005

Kalam, Md Abul, Masjuki Hj Hassan, Abdesselam Hamlaoui, Amalina Bte Muhammad Afifi, TM Indra Mahlia, and Md Aslam Uddin. "Development of Co- Relation Between Vehicle and Stationary Dynamometer- Engine Emissions." In ASME 2005 Internal Combustion Engine Division Spring Technical Conference, pp. 101-106. American Society of Mechanical Engineers, 2005. (ISI/SCOPUS Indexed Publication)
M.A. Kalam, H.H. Masjuki, Effect of coconut oil blended fuels on diesel engines wear and lubrication, Journal of Lubrication Science, vol. 17-4, Leaf Coppin France, August 2005, pp.389-402. (ISI/SCOPUS Indexed Publication)
Kalam, Md Abul, Masjuki Hj Hassan, and Edzrol Niza Mohamad. "Wear and Lubrication Characteristics of a Multi-Cylinder Diesel Engine Using Vegetable Oil Blended Fuel." In World Tribology Congress III, pp. 553-558. American Society of Mechanical Engineers, 2005. (ISI/SCOPUS Indexed Publication)
Rahman, Saidur, Nizam Mohd Sidik, Masjuki HJ Hassan, Tamjis Mohd Rom, and Iswadi Jauhari. "Temperature performance and usage conditions of domestic refrigerator-freezers in Malaysia." HKIE Transactions 12, no. 2 (2005): 30-35. (ISI/SCOPUS Indexed Publication)
M. A. Kalam, H. H. Masjuki, Recent developments on biodiesel in Malaysia, Journal of Scientific & Industrial Research, India, vol. 64, no. 11, Nov. 2005, pp. 920-927. (ISI/SCOPUS Indexed Publication)
Varman, M., Masjuki, H. H., Mahlia, T. M. I. 2005. Electricity savings from implementation of minimum energy efficiency standard for TVs in Malaysia Energy and Buildings (SCOPUS-Indexed)
Mahlia, T. M. I., Said, M. F. M., Masjuki, H. H., Tamjis, M. R. 2005. Cost-benefit analysis and emission reduction of lighting retrofits in residential sector Energy and Buildings (SCOPUS-Indexed)
Saidur, R., Masjuki, H. H., Mahlia, T. M. I. 2005. Labeling design effort for household refrigerator-freezers in Malaysia Energy Policy (SCOPUS-Indexed)
Kalam, M. A., Masjuki, H. H. 2005. Recent developments on biodiesel in Malaysia Journal of Scientific and Industrial Research (SCOPUS-Indexed)
Wan Nik, W. B., Ani, F. N., Masjuki, H. H., Eng Giap, S. G. 2005. Rheology of bio-edible oils according to several rheological models and its potential as hydraulic fluid Industrial Crops and Products (SCOPUS-Indexed)
Hendra, R., Hamdani, Mahlia, T. M. I., Masjuki, H. H. 2005. Thermal and melting heat transfer characteristics in a latent heat storage system using mikro Applied Thermal Engineering (SCOPUS-Indexed)
Wan Nik, W. B., Ani, F. N., Masjuki, H. H. 2005. Thermal stability evaluation of palm oil as energy transport media Energy Conversion and Management (SCOPUS-Indexed)
Mahlia, T. M. I., Said, M. F. M., Masjuki, H. H., Tamjis, M. R. 2005. Cost-benefit analysis and emission reduction of lighting retrofits in residential sector Energy and Buildings (ISI-Indexed)
Varman, M., Masjuki, H. H., Mahlia, T. M. I. 2005. Electricity savings from implementation of minimum energy efficiency standard for TVs in Malaysia Energy and Buildings (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Taha, F. M., Rahim, N. A., Saidur, R. 2005. Energy labeling for electric fans in Malaysia Energy Policy (ISI-Indexed)
Saidur, R., Masjuki, H. H., Mahlia, T. M. I. 2005. Labeling design effort for household refrigerator-freezers in Malaysia Energy Policy (ISI-Indexed)
Kalam, M. A., Masjuki, H. H. 2005. Recent developments on biodiesel in Malaysia Journal of Scientific Industrial Research (ISI-Indexed)
Nik, W. B. W., Ani, F. N., Masjuki, H. H., Giap, S. G. E. 2005. Rheology of bio-edible oils according to several rheological models and its potential as hydraulic fluid Industrial Crops and Products (ISI-Indexed)
Hendra, R., Hamdani, Mahlia, T. M. I., Masjuki, H. H. 2005. Thermal and melting heat transfer characteristics in a latent heat storage system using Mikro Applied Thermal Engineering (ISI-Indexed)
Nik, W. B. W., Ani, F. N., Masjuki, H. H. 2005. Thermal stability evaluation of palm oil as energy transport media Energy Conversion and Management (ISI-Indexed)
Kalam, M. A., Masjuki, H. H. 2005. Effect of coconut oil-blended fuels on diesel engine wear and lubrication Lubrication Science (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Taha, F. M., Rahim, N. A., Saidur, R. 2005. Energy labeling for electric fans in Malaysia Energy Policy (SCOPUS-Indexed)

2004

J.A. Ghani, I.A. Choudhury and H.H. Masjuki, Application of Taguchi method in the optimization of end milling parameters, Journal of Materials Processing Technology, Elsevier, 2004, No. 145, pp. 84-92. (ISI/SCOPUS Indexed Publication)
M.A. Kalam and H.H. Masjuki, Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil, Int. Journal of Biomass and Bioenergy, Elsevier U.K., Sept. 2004, vol. 27, no. 3, pp. 289-297 (ISI/SCOPUS Indexed Publication)
Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Wear mechanism of TiN coated carbide and uncoated cermets tools at high cutting speed applications Journal of Materials Processing Technology (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia Energy Policy (SCOPUS-Indexed)
Saidur, R., Nasrudin, A. R., Masjuki, H. H., Choudhury, I. A., Mahlia, T. M. I., Husnawan, M. 2004. Development of energy test procedure for household refrigerator-freezers in Malaysia International Journal of Power and Energy Systems (SCOPUS-Indexed)
Kalam, M. A., Masjuki, H. H. 2004. Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil Biomass and Bioenergy (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia Energy Policy (SCOPUS-Indexed)
Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Performance of P10 TiN coated carbide tools when end milling AISI H13 tool steel at high cutting speed Journal of Materials Processing Technology (SCOPUS-Indexed)
Maleque, M. A., Poon, Y. M., Masjuki, H. H. 2004. The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel Journal of Materials Processing Technology (SCOPUS-Indexed)
Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Wear mechanism of TiN coated carbide and uncoated cermets tools at high cutting speed applications Journal of Materials Processing Technology (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia Energy Policy (ISI-Indexed)
Maleque, M. A., Poon, Y., Masjuki, H. H. 2004. The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel Journal of Materials Processing Technology (ISI-Indexed)
Ghani, J. A., Choudhury, I. A., Masjuki, H. H. 2004. Performance of P10TiN coated carbide tools when end milling AISI H13 tool steel at high cutting speed Journal of Materials Processing Technology (ISI-Indexed)
Kalam, M. A., Masjuki, H. H. 2004. Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil Biomass Bioenergy (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Amalina, M. A. 2004. Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia Energy Policy (ISI-Indexed)

2003

Husnawan M., Masjuki H.H., M.D. Irfan, ¿Exhaust emission evaluation of a single cylinder diesel engine fueled by crude palm oil (CPO) water emulsions¿, SAE Paper 2003-01-1931/JSAE 20030030, SAE Int., USA 2003, pp.1-5
Kalam, M.A., M. Husnawan and H.H. Masjuki, Exhaust emission and combustion evaluation of coconut oil powered indirect injection diesel engine, Int. Journal Renewable Energy, Paragon Press UK, 2003, vol. 28, no. 15, pp. 2405-2415. (ISI/SCOPUS Indexed Publication)
T.M.I. Mahlia, H.H. Masjuki, I.A. Choudhury, Saidur. R and Noor Leha, Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia, Energy Journal, Elsevier Science Ltd, U.K., 2003, vol. 28, no. 7, pp. 751-754 (ISI/SCOPUS Indexed Publication)
Kalam, M. A., Masjuki, H. H. 2003. Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear Lubrication Science (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Choudhury, I. A., NoorLeha, A. R. 2003. Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia Energy (SCOPUS-Indexed)
Maleque, M. A., Masjuki, H. H., Sapuan, S. M. 2003. Vegetable-based biodegradable lubricating oil additives Industrial Lubrication and Tribology (SCOPUS-Indexed)
Maleque, M. A., Masjuki, H. H., Sapuan, S. M. 2003. Vegetable-based biodegradable lubricating oil additives Industrial Lubrication and Tribology (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Saidur, R., Choudhury, I. A., NoorLeha, A. R. 2003. Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia Energy (ISI-Indexed)
Kalam, M. A., Husnawan, M., Masjuki, H. H. 2003. Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine Renewable Energy (ISI-Indexed)
Kalam, M. A., Husnawan, M., Masjuki, H. H. 2003. Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine Renewable Energy (SCOPUS-Indexed)

2002

T.M.I. Mahlia, H.H. Masjuki, and I.A. Choudhury, A theory on energy efficiency standard and label, Energy Conservation and Management an Int. Journal, Elsevier Science Ltd, U.K., 2002, Vol.43 (6), pp.743-761 (ISI/SCOPUS Indexed Publication)
Kalam, M. A., & Majsuki, H. H. (2002). Use of an additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216(9), 751-757. (ISI-Indexed)
M.A. Kalam and H.H. Masjuki, Biodiesel from palmoil-an analysis of its properties and potential, Int. Journal of Biomass & Bioenergy, Pergamon UK, 2002, Vol. 23, No.6, pp. 471-479. (ISI/SCOPUS Indexed Publication)
Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A., Saidur, R. 2002. Potential CO2 reduction by fuel substitution to generate electricity in Malaysia Energy Conversion and Management (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Potential electricity savings by implementing energy labels for room air conditioner in Malaysia Energy Conversion and Management (ISI-Indexed)
Saidur, R., Masjuki, H. H., Choudhury, I. A. 2002. Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption Energy Conversion and Management (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Theory of energy efficiency standards and labels Energy Conversion and Management (ISI-Indexed)
Maleque, M. A., Masjuki, H. H. 2002. Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant Industrial Lubrication and Tribology (ISI-Indexed)
Kalam, M. A., Masjuki, H. H. 2002. Biodiesel from palmoil - An analysis of its properties and potential Biomass and Bioenergy (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Development of energy labels for room air conditioner in Malaysia: Methodology and results Energy Conversion and Management (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Ghazali, N. N. N. 2002. Economical and environmental impact of room air conditioners energy labels in Malaysia Energy Conversion and Management (SCOPUS-Indexed)
Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A., Saidur, R. 2002. Potential CO2 reduction by fuel substitution to generate electricity in Malaysia Energy Conversion and Management (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Potential electricity savings by implementing energy labels for room air conditioner in Malaysia Energy Conversion and Management (SCOPUS-Indexed)
Saidur, R., Masjuki, H. H., Choudhury, I. A. 2002. Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption Energy Conversion and Management (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Saidur, R. 2002. Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151 International Journal of Power and Energy Systems (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Theory of energy efficiency standards and labels Energy Conversion and Management (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Ghazali, N. N. N. 2002. Economical and environmental impact of room air conditioners energy labels in Malaysia Energy Conversion and Management (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A. 2002. Development of energy labels for room air conditioner in Malaysia: methodology and results Energy Conversion and Management (ISI-Indexed)
Maleque, M. A., Masjuki, H. H. 2002. Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant Industrial Lubrication and Tribology (SCOPUS-Indexed)
Kalam, M. A., Masjuki, H. H. 2002. Biodiesel from palmoil - an analysis of its properties and potential Biomass Bioenergy (ISI-Indexed)

2001

Masjuki, H. H., Kalam, M. A., Maleque, M. A., Kubo, A., Nonaka, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (SCOPUS-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Saidur, R. 2001. Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia Energy Conversion and Management (SCOPUS-Indexed)
Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A. 2001. Potential electricity savings by implementing minimum energy efficiency standards for room air conditioners in Malaysia Energy Conversion and Management (SCOPUS-Indexed)
Masjuki, H. H., Saidur, R., Choudhury, I. A., Mahlia, T. M. I., Ghani, A. K., Maleque, M. A. 2001. The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia Energy (ISI-Indexed)
Masjuki, H. H., Kalam, M. A., Maleque, M. A., Kubo, A., Nonaka, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering (ISI-Indexed)
Mahlia, T. M. I., Masjuki, H. H., Choudhury, I. A., Saidur, R. 2001. Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia Energy Conversion and Management (ISI-Indexed)
Masjuki, H. H., Mahlia, T. M. I., Choudhury, I. A. 2001. Potential electricity savings by implementing minimum energy efficiency standards for room air conditioners in Malaysia Energy Conversion and Management (ISI-Indexed)
Masjuki, H. H., Saidur, R., Choudhury, I. A., Mahlia, T. M. I., Ghani, A. K., Maleque, M. A. 2001. The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia Energy (SCOPUS-Indexed)

2000

Maleque, M. A., Masjuki, H. H., Haseeb, A. 2000. Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant Wear (ISI-Indexed)

1999

Masjuki, H. H., Maleque, M. A., Kubo, A., Nonaka, T. 1999. Palm oil and mineral oil based lubricants - their tribological and emission performance Tribology International (ISI-Indexed)

1998

Maleque, M. A., Masjuki, H. H., Ishak, M. 1998. Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel Tribology Transactions (ISI-Indexed)

1997

Masjuki, H., Abdulmuin, M. Z., Sii, H. S. 1997. Indirect injection diesel engine operation on palm oil methyl esters and its emulsions Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering (ISI-Indexed)
Masjuki, H. H., Maleque, M. A. 1997. Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test Wear (ISI-Indexed)

1996

Masjuki, H., Abdulmuin, M. Z., Sii, H. S. 1996. Investigations on preheated palm oil methyl esters in the diesel engine Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy (ISI-Indexed)
Masjuki, H. H., Maleque, M. A. 1996. The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel Wear (ISI-Indexed)

1995

Sii, H. S., Masjuki, H., Zaki, A. M. 1995. DYNAMOMETER EVALUATION AND ENGINE WEAR CHARACTERISTICS OF PALM OIL DIESEL EMULSIONS Journal of the American Oil Chemists Society (ISI-Indexed)
Masjuki, H. H., Sapuan, S. M. 1995. PALM OIL METHYL-ESTERS AS LUBRICANT ADDITIVE IN A SMALL DIESEL-ENGINE Journal of the American Oil Chemists Society (ISI-Indexed)

1993

Masjuki, H., Zaki, A. M., Sapuan, S. M. 1993. A RAPID TEST TO MEASURE PERFORMANCE, EMISSION AND WEAR OF A DIESEL-ENGINE FUELED WITH PALM OIL DIESEL Journal of the American Oil Chemists Society (ISI-Indexed)

Proceeding

2017

Ibrahim, T. M., Syahir, A. Z., Zulkifli, N. W. M., Masjuki, H. H., & Osman, A. (2017). Enhancing vehicle’s engine warm up using integrated mechanical approach. IOP Conference Series: Materials Science and Engineering, 210(1), 012064. (ISI-Indexed)

2016

Ruhul, A. M., Masjuki, H. H., Kalam, M. A., Shahir, S. A., Reham, S. S., & Shancita, I. (2016). Biodiesel production, properties and emissions test characteristics of non-edible fuels in Diesel engine. Journal of Scientific Research and Development 3 (1): 101-106. (ISI/SCOPUS Indexed Publication)

Monirul, I. M., Masjuki, H. H., Kalam, M. A., Zulkifl, N. W. M., Varman, M. (2016) “Effect of Biodiesel-Diesel-Ethanol Ternary Blend on Cold Flow Properties and Particulate Matter of Diesel Engine Exhaust emission.” International sustainable technology, energy & civilization conference (ISTECC 2016), The University Kebangsaan Malaysia

Imdadul H. K, Masjuki H. H, Kalam M. A, Zulkifli N. W. M, Varman M, Rashed M. M (2016). Effect of long chain alcohol additives on fuel properties and exhaust emission of biodiesel blends in a diesel engine. 2nd International sustainable technology, energy & civilization conference (ISTECC), The University Kebangsaan Malaysia.

Mosarof, M.H., Kalam, K.A., Masjuki, H.H., Arslan, A., Ashraful, A.M., Monirul, I.M. “Evaluation of lubricating performance of biodegradable Moringa oleifera oil.” TECHON 2016, Kuching Sarawak, Malaysia (Non-ISI/Non-SCOPUS)

2015

H.G. How, H.H. Masjuki, M.A. Kalam and Y.H. Teoh. Evaluation of Performance, Combustion, Regulated and Particulate Matter Emissions of a Common-Rail DI Engine Fuelled with Moringa Oleifera Biodiesel. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.

Y.H. Teoh, H.H. Masjuki, M.A. Kalam and H.G. How. Development of Electronically Controlled Common- Rail Fuel Injection System and Its Application Strategy in Single-Cylinder Diesel Engine. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.

M. I. A. Bakar, M. N. A. Yusoff, H. H. Masjuki and N. W. M. Zulkifli. The Effects of Palm Waste Bio-Based As Fuel Additive on SI Engine Performance. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.

Ruhul, A. M., Kalam, M. A., Masjuki, Imtenan, S., Sanjid, A., Teoh, Y.T., How, H.G. (2015). Combustion and emission investigation of Calophyllum inophyllum biodiesel blends in an unmodified diesel engine. Proceeding of Australian Combustion Symposium, 220-223 (SCOPUS-Indexed)

Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G., Ashrafur Rahman, S. M., Ruhul, A. M (2015). Effect of Injection Timing on Gasoline/Diesel and Gasoline/ Biodiesel Fuelled Dual-Fuel Engine: A Comparative Study. Proceeding of Australian Combustion Symposium, 216-219 (SCOPUS-Indexed)

Rashedul, H. K., Masjuki, H. H., Kalam, M. A., & Ashraful, A. M. (2017). Performance and Emission of a CI Engine Using Antioxidant Treated Biodiesel. Journal of Clean Energy Technologies, 5(1). (SCOPUS-Indexed)

Shancita, I., Masjuki, H. H., & Kalam, M. A. (2017). Particulate Matter Emission Characteristics of a Biodiesel Fueled Engine at Idling Speed. Journal of Clean Energy Technologies, 5(1). (SCOPUS-Indexed)

2014

N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, S.S.N. Azman, Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester, in: 41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY, Leeds Trinity University, 2014. (ISI-Indexed)

2013

Imran A, Masjuki HH, Kalam MA, Varman M, Hasmelidin M, Almahmud KAH, Shahir SA, Habibullah M. Study of friction and wear characteristic of Jatropha oil blended lube oil. The Malaysian International Tribology Conference 2013 (MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Masum BM, Kalam MA, Masjuki HH, Palash SM. Study on the effect of adiabatic flame temperature on NOx formation using ethanol gasoline blend in SI engine. The 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), 13-14 June, 2013, Guangzhou, China.

Alam T, Al Mahmud KHA, Hasan MF, Shahir SA, Masjuki HH, Kalam MA, Imran A, Mobarak HM. Effect of Magnesia on Zinc Oxide Stabilized Nano Alumina Ceramic Powder in Sintering Process and Its Impact on Mechanical Properties. The Malaysian International Tribology Conference 2013 (MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Rizwanul Fattah IM, Masjuki HH, Kalam MA, Varman M. Effect of antioxidant added coconut biodiesel blends on emission characteristics of a heavy-duty diesel engine. The 2013 International Conference on Frontiers of Environment, Energy and Bioscience (ICFEEB 2013), 24-25 October 2013, Beijing, China

Masjuki HH, Kalam MA, Varman M, Ashrafur Rahman SM, Rizwanul Fattah IM, Mofijur M. Biofuel: Prospects and challenges as cleaner energy source. The 6th AUN/SEED-Net Regional Conference On Energy Engineering (RCEneE), 6-7 September 2013, Institut Teknologi Bandung, Indonesia.

Masjuki HH, Kalam MA, Mofijur M, Shahabuddin M. Biofuel: policy, standardization and recommendation for sustainable future energy supply. The Mediterranean Green Energy Forum (MGEF-13), 16-20 June 2013, Fes, Morocco.

Arbab MI, Masjuki HH; Varman M, Kalam MA, Imtenan S, Sajjad H. Experimental Investigation of Optimum Blend Ratio of Jatropha, Palm and Coconut Based Biodiesel to Improve Fuel Properties, Engine Performance and Emission Characteristics. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.

How HG, Masjuki HH, Kalam MA, Teoh YH, Abdullah MA. Effect of injection timing on performance, emission and combustion characteristics of a common-rail diesel engine fuelled with coconut oil methyl ester. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.

Teoh YH, Masjuki HH, Kalam MA, Amalina MA, How HG. Impact of waste cooking oil biodiesel on performance, exhaust emission and combustion characteristics in a light-duty diesel engine. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.

2012

Masjuki HH, Kalam MA. An overview of biofuel as a renewable energy source: Development and Challenges. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh. (Keynote)

Liaquat AM, Masjuki HH, Kalam MA, Bhuiya MMK, Varman M. Influence of coconut biodiesel and waste cooking oil blended fuels on engine performance and emission characteristics. Proceedings of the 2012 Fall Conference of the ASME Internal Combustion Engine Division (ICEF2012), 23-26 September 2012, Vancouver, BC, Canada.

Liaquat AM, Masjuki HH, Kalam MA, Rizwanul Fattah IM, Hazrat MA, Varman M, Mofijur M, Shahabuddin M. Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh.

Shahabuddin M, Masjuki HH, Kalam MA. Experimental investigation into tribological characteristics of bio-lubricant formulated from Jatropha oil. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh.

Liaquat AM, Masjuki HH, Kalam MA, Varman M. Impact of biodiesel on injector deposit formation. 5th AUN/SEED- Net Regional Conference on New/Renewable Energy 26-27 September 2012, School of Transportation Engineering, Hanoi University of Science and Technology.

Liaquat AM, Masjuki HH, Kalam MA, Varman M. Engine performance and exhaust emissions of a single cylinder CI engine fuelled with coconut biodiesel blended fuels. 5th AUN/SEED-Net Regional Conference on New/Renewable Energy 26-27 September 2012, School of Transportation Engineering, Hanoi University of Science and Technology.

M. Shahabuddin, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, M. Mofijur, Vizy Nazira, M.Varman, A.M. Liaquat, 2012.Biofuel: Potential Energy Source in Road Transportation Sector in Malaysia, SUSTAINABLE FUTURE ENERGY 2012 and 10th SEE FORUM, Innovations for Sustainable and Secure Energy,pp. 98-110. 21-23 November, Brunei Darussalam

2011

Liaquat AM, Masjuki HH, Kalam MA, Varman, M, Hazrat MA. Experimental analysis on engine performance and emission characteristics using biodiesel obtained from non-edible oil. Regional Conference on Automotive Research (ReCAR 2011), 14-15 December 2011, Kuala Lumpur, Malaysia.

Liaquat AM, Masjuki HH, Kalam MA, Varman M. Friction and wear characteristic of waste vegetable oil contaiminated lubricants. Regional Tribology Conference (RTC 2011), 22-24 November 2011, Bayview Hotel, Langkawi, Malaysia.

Liaquat AM, Masjuki HH, Kalam MA, Varman M, Hazrat, MA, Shahabuddin M, Mofijur M. Application of blend fuels in a diesel engine. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011,Bangkok, Thailand.

Mofijur M, Masjuki HH, Kalam MA, Shahabuddin M, Hazrat MA, Liaquat AM. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok,Thailand

Shahabuddin M, Masjuki HH, Kalam MA, Mofijur M, Hazrat MA, Liaquat AM. Effect of additive on performance of C.I. engine fuelled with bio diesel. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok, Thailand.

2010

A.M. Liaquat, H.H. Masjuki, M.A. Kalam, A.
Rasyidi. ¿Experimental Analysis of Wear and Friction
Characteristics of Jatropha Oil added Lubricants.¿ The
2010 International Conference on Mechanical and
Aerospace Engineering (ICMAE 2010), Kuala Lumpur,
Malaysia, Pp. 184 - 188, 26 - 28 November, 2010. (Non-ISI/Non-SCOPUS)

AREAS OF RESEARCH
(Project title), (Role), (From)-(Until), (Level), (Source).

Formulation and optimization of palm-based TMP ester blend as bio-based lubricant for engine oil, Consultant, 2018 - 2020, RU Geran - Fakulti Program, (National)
Enhancing Corrosion Resistance of Biodiesel Fueled Engines Using Chemically Active Oil Filter technology, Principal Investigator(PI), 2018 - 2020, RU Operation, (National)
Investigation Of The Effect Of Wear On Pv Module Glass Surface For Mechanical Cleaning System, Consultant, 2018 - 2019, International Funding, (International)
Enhancing Corrosion Resistance of Biodiesel Fueled Engines Using Chemically Active Oil Filter technology, Principal Investigator(PI), 2018 - 2020, RU Geran - Fakulti Program, (National)
Self-sustained Hybrid Wind-Solar Green Energy Generation and Storage System, Co-Investigator, 2017 - 2018, Geran Penyelidikan Universiti Malaya (UMRG), (National)
The Design, Simulation And Testing Of A Deflector System To Enhance The Aerodynamics Performance Of Cross Axis Wind Turbine, Consultant, 2017 - 2019, Geran Penyelidikan Universiti Malaya (UMRG Programme) - AET (Innovative Technology (ITRC)), (University)
Construction of electrochemical enzymatic biosensor for biomedical application., Consultant, 2016 - 2019, Bantuan Kecil Penyelidikan (BKP), (National)
Prototype Development, Fabrication And Testing Of A Novel Cross Axis Wind Turbine, Consultant, 2016 - 2019, Prototype Research Grant Scheme (PRGS), (National)
The Design And Investigation Of A Novel Ecological Air Cleaning And Cooling System Using The Concept Of A Living Green Wall, Consultant, 2016 - 2017, UM Living Lab Grant Programme - SUS (Sustainability Science), (National)
Improvement of diesel engine key fuel properties by optimizing alcohol-biodiesel-diesel blend ratio for low greenhouse gas emission, Others, 2015 - 2018, Fundamental Research Grant Scheme (FRGS), (National)
Improvement Of Diesel Engine Key Fuel Properties By Optimizing Alcohol-biodiesel-diesel Blend Ratio For Low Greenhouse Gas Emission, Principal Investigator(PI), 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
synergistic effect of nanographene on rheology and lubricating mechanism of biobased lubricant, Principal Investigator(PI), 2015 - 2018, Fundamental Research Grant Scheme (FRGS), (National)
Tribology performance of carbon based coating for artificial joints, Consultant, 2015 - 2017, Bantuan Kecil Penyelidikan (BKP), (National)
Tribological characteristics of bio-based lubricant, Principal Investigator(PI), 2015 - 2019, UM(Grand Challenge), (National)
Synergistic Effect Of Nanographene On Rheology And Lubricating Mechanism Of Biobased Lubricant, Consultant, 2015 - 2019, Fundamental Research Grant Scheme (FRGS), (National)
Feasibility of Green and Fuel Economy Engine Oil Derived from Bio-Based Lubricant, Consultant, 2014 - 2016, Bantuan Kecil Penyelidikan (BKP), (National)
Feasibility of green and fuel economy engine oil derived from bio based lubricant, Principal Investigator(PI), 2014 - 2016, Bantuan kecil penyelidikan (BKP), (National)
Fundamental Investigation Of High Efficiency Biopolymer Based Thermoelectric Materials As Waste Heat Energy Harvester., Consultant, 2014 - 2017, Fundamental Research Grant Scheme (FRGS), (National)
Design Of A New Eco Lightweight Friction Material With Palm Oil Fiber Enrichment For Wear Characteristic Study, Consultant, 2013 - 2017, Program Rakan Penyelidikan UM, (University)
Optimization Of High Quality Biodiesel Fuel For Higher Thermal Efficiency And Greenhouse Gas (ghg) Reduction In Automobile Engine, Principal Investigator(PI), 2013 - 2017, Fundamental Research Grant Scheme (FRGS), (National)
Fabrication, Characterisation, Mechanical, Tribological Tests Of Aluminium Matrix Composites (amcs) For Automotive Applications, Consultant, 2013 - 2015, Program Rakan Penyelidikan UM, (University)
Performance, Emission And Lubricity Investigation Of Jatropha And Palm Oil As Biodiesel Fuel For Internal Combustion Engine, Consultant, 2013 - 2017, Program Rakan Penyelidikan UM, (University)
ON-BOARD EMULSIFIER FUEL SYSTEM FOR COMMERCIAL DIESEL ENGINE, Principal Investigator(PI), 2013 - 2015, PRPUM, (National)
Combustion analysis, performance and gaseous emission of a single cylinder diesel engine fuelled with tenary fuel using homogeneous charge compression ignition technique, Director, 2013 - 2015, NONE, (National)
OPTIMIZATION OF HIGH QUALITY BIODIESEL FUEL FOR HIGHER THERMAL EFFICIENCY AND GREENHOUSE GAS (GHG) REDUCTION IN AUTOMOBILE ENGINE, Principal Investigator(PI), 2013 - 2016, Fundamental Research Grant Scheme (FRGS), (National)
Development of Alternative and Renewable EnergyCarrier (DAREC), Principal Investigator(PI), 2013 - 2015, High Impact Research (HIR), (National)
Friction and wear performance evaluation of pure Non-doped DLC coating and doped DLC under different biodiesel oil-lubricated conditions, Principal Investigator(PI), 2012 - 2016, NONE, (National)
Investigation into fuel property effects on ignition control and unregulated emissions in homogeneous charge compression ignition engine, Director, 2012 - 2015, NONE, (National)
Investigation into Fuel Property Effects on Ignition Control and Unregulated Emissions in Homogeneous Charge Compression Ignition Engine, Principal Investigator(PI), 2012 - 2014, Geran Penyelidikan Universiti Malaya (UMRG), (National)
EXPERIMENTAL STUDY OF TRIBOLOGICAL PROPERTIES OF DIAMOND-LIKE-CARBON (DLC) COATINGS FOR ENGINE CYLINDER, Principal Investigator(PI), 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG), (National)
COMPOSITIONAL INSTABILITY OF PALM BIODIESEL AND REMEDIAL MEASURES, Consultant, 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), (University)
Investigation into Fuel Property Effects on Ignition Control and Unregulated Emissions in Homogeneous Charge Compression Ignition Engine, Principal Investigator(PI), 2012 - 2015, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), (University)
Phase Change material (PCM) for energy storage system, Co-Investigator, 2011 - 2015, High Impact Research (HIR), (University)
Experimental Investigation of New Bioenergy sources for Biofuel from Tropical Biodiversity, Co-Investigator, 2011 - 2015, High Impact Research (HIR), (University)
Clean diesel technology for military and civilian transport vehicles (HIR grant, RM 5.50mil.), Principal Investigator(PI), 2011 - 2015, High Impact Research (HIR), (National)
Automobiles fuel economy standards and label: implementation possibilities in Malaysia, Co-Investigator, 2011 - 2015, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Tribological Studies on Non-edible Vegetable Oil Based Biodiesel in Diesel Engine Components, Principal Investigator(PI), 2011 - 2013, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Time based/Transient simulation of engine coolant peak temperature after key-off, Director, 2010 - 2015, NONE, (National)
INVESTIGATION OF CORROSION OF AUTOMOTIVE MATERIALS IN PALM BIODIESEL, , 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
ENGINEERING AND ECONOMIC ANALYSIS OF JATROPHA CURCAS OIL, , 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
TRIBOLOGICAL STUDIES AND PERFORMANCE EVALUATION OF PALM DIESEL FUELLED COMPRESSION IGNITION, , 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
CHARACTERIZATION OF DIFFERENT BLENDS PRODUCED FROM PETROLEUM DIESEL AND THREE INDIVIDUAL BIODIESEL OBTAINED FROM PALM, SOYBEAN AND RAPESSED OILS, Principal Investigator(PI), 2010 - 2012, Fundamental Research Grant Scheme (FRGS), (National)
STUDY ON NOISE AND EXHAUST EMISSIONS OF A BIODIESEL FUELED ENGINE, , 2010 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
5 kW Power Conditioning Unit for Micro-cogeneration Fuel Cell System, Co-Investigator, 2009 - 2011, ScienceFund, (National)
STUDY ON BIOFUEL PROPERTIES FOR INTERNAL COMBUSTION ENGINE, , 2009 - 2011, Postgraduate Research Grant (PPP) - Research, (National)
Development of Catalytic Fluid Pyrolysis Process from Oil Palm Biomass for Bio-Fuel Production, Co-Investigator, 2009 - 2011, ScienceFund, (National)
LUBRICITY AND TRIBO-PROPERTIES IMPROVEMENT STUDIESOF BIODIESEL FUEL PRODUCED FROM VARIOUS OIL SOURCES, Others, 2009 - 2011, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Extensive Studies on Fame Oxidation and Thermal Stability (Project number: RG040-09AET,RM180,000)., Co-Investigator, 2009 - 2012, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Time-Based/Transient Simulation of Engine Coolant Peak Temperature After Key-Off(Techno Fund Proejct, RM538,600)., Principal Investigator(PI), 2009 - 2012, ScienceFund, (National)
CORROSION AND TRIBO-CORROSION OF AUTOMOTIVE COMPONENTS AND THEIR DURABILITY IN PALM OIL BASED BIOFUEL, , 2008 - 2010, Postgraduate Research Grant (PPP) - Research, (National)
Palm Diesel Properties Enhancement for Automotive Application, Others, 2008 - 2010, ScienceFund, (National)
Effect of vegetable oil blended lubricant on the performance and durability of small diesel engine, Principal Investigator(PI), 2008 - 2009, Short Term Research Fund (Vote F)(PJP), (National)
Development of Highly Efficient Fermentation Process for Bioethanol from Woody Biomass and Performance Study of a Small Diesel Engine Using Ethanol-blended Fuels, Co-Investigator, 2008 - 2010, ScienceFund, (National)
Study of Corrosion and Tribo-Corrosion of Automotive Components and Their Durability in Palm Oil Base Fuel, Co-Investigator, 2008 - 2009, ScienceFund, (National)
Palm Biodiesel Properties Enhancement for Automotive Application, Others, 2008 - 2010, ScienceFund, (National)
Nanocomposite Based Eco-Friendly Solder for Microelectronic Packaging Applications, Co-Investigator, 2007 - 2009, ScienceFund, (National)
Biodiesel carbon deposit study using single cylinder engine, Principal Investigator(PI), 2007 - 2008, Geran Penyelidikan Universiti Malaya (UMRG), (University)
Virtual design and manufacture of low head and low flowrate micro-hydro turbines, Co-Investigator, 2007 - 2009, ScienceFund, (National)
Modelling, Simulation And Redesign of Electric Fan Blades to Optimize Energy Performance, Co-Investigator, 2007 - 2009, Short Term Research Fund (Vote F)(PJP), (University)
Design of clothes dryer from room air conditioners waste heat, Co-Investigator, 2007 - 2009, ScienceFund, (National)
Nanocomposite Based Eco-Friendly Solder for Microelectronic Packaging, Others, 2007 - 2009, ScienceFund, (National)
Energy efficient nano coating to control solar radiation through the glasses of building windows, Co-Investigator, 2007 - 2009, ScienceFund, (National)
Feasibility study on the extensive utilization of biodiesel produced from waste and/or pure oils/fats in the public vehicle in Hangzhou (China) and preparations for the implementation of a demonstration plant, Others, 2006 - 2008, EU-ASIA Research Grant, (National)
Energy efficient nano coating to control solar radiation through the glasses of building windows, Co-Investigator, 2006 - 2008, ScienceFund, (National)
Design and development of a car ventilator powered by solar energy, Co-Investigator, 2006 - 2008, ScienceFund, (National)
Dev. of environmental-safe biobased hydraulic fluid by chemical modification technique (based at Uni. Malaysia Trengganu), Co-Investigator, 2006 - 2009, MOSTI, (National)
Development and performance investigation of a domestic refrigerator using hydrocarbons and refrigerant mixtures, Others, 2004 - 2006, ScienceFund, (National)
Development and performance investigation of a domestic refrigerator using hydrocarbons and refrigerant mixtures, Others, 2002 - 2006, MOSTI (IRPA), (National)
CNG/DI engine and transmission-Fuel System, Others, 2002 - 2006, ScienceFund, (National)
Modeling, design, modification and test of lubricant and cooling system of a new free piston gas linear generator, Others, 2002 - 2005, ScienceFund, (National)
Fuel system; Direct Injection Natural Gas Technology, June 2002 - June 2006, Project Leader (Sub-Group Leader), Coordinator, 2002 - 2006, MOSTI (IRPA), (National)
Performance and emission study of a new direct injection (DI) compressed natural gas (CNG) engine, Others, 2002 - 2006, ScienceFund, (National)
Modeling, design, modification and test of lubricant and cooling system of a new free piston gas linear generator, Others, 2002 - 2005, MOSTI (IRPA), (National)
Modeling, design, modification and test of a higher efficiency palm oil diesel (POD) fueled compression ignition engine., Others, 2002 - 2006, MOSTI (IRPA), (National)
Performance and emission study of a new direct injection (DI) compressed natural gas (CNG) engine, Others, 2002 - 2006, MOSTI (IRPA), (National)
Exhaust Gas Emission Control and Noise Reduction of Automotive Engines (Low Cost Catalytic Converter Development), Others, 1999 - 2003, ScienceFund, (National)
Climatical Degradation of Transparent heat Mirrors, Others, 1997 - 1999, Nippon Sheet Glass Foundation Project , (National)
An Engineering Analysis to Identify Energy Inefficient Residential Electrical Appliances and Setting Energy-Efficient Guidelines for These Appliances, Others, 1997 - 2002, ScienceFund, (National)
Development and Implementation of a Control System for Natural Gas fuelled Automobile Engine, Others, 1996 - 2009, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Modeling, Design and Efficient Performance Appraisal of Automobile Engine combustion Chamber and Injector, Others, 1996 - 2001, ScienceFund, (National)
Friction and Wear Characteristics of Metallic and Polymeric Materials and Tribological Failure Investigation, Others, 1993 - 2009, Short Term Research Fund (Vote F)(PJP), (National)
Performance, Emission and Tribological Study of Gasoline, Diesel, Natural Gas and Vegetable Oil Fuelled Automobile Engine, Others, 1992 - 2009, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Effect of Palm Oil Diesel on the Wear Rate of Metals and Small Diesel Engine Components, Principal Investigator(PI), 1992 - 1998, Short Term Research Fund (Vote F)(PJP), (National)
Energy Conservation in Industry, Others, 1992 - 1997, ASEAN-AUSTRALIAN AAECP, (International)
Palm Oil Emulation as Cutting Fluid, Others, 1991 - 1993, Geran Penyelidikan Universiti Malaya (UMRG), (National)
Development of an Electronics Based EnergyManagement Control System, Co-Investigator, 1990 - 1993, AAECP, (International)
Energy Conservation in Buildings Under theASEAN-US Energy Conservation and Management Programme, Principal Investigator(PI), 1988 - 1990, USAID, (International)
IC Engines
Tribology
Biofuel
Energy Efficiency

CONSULTATION PROJECT/CONSULTANCY
(Project title), (Role), (From)-(Until), (Organisation).

Four Ball and SEM/EDX Test at UM Engine Tribology Laboratory with Central Queensland University, Australia, 2016-2016, Central Queensland University, Australia

Four Ball and SEM/EDX Test at UM Engine Tribology Laboratory, 2016-2016, Md. Abul Kalam Azad, Central Queensland University,

Performance and Emission Characteristics of biodiesel blend with diesel, 2016-2016, Department of Chemistry, UM

Biodiesel Four Ball and SEM/EDX Test at UM Engine Tribology Laboratory, 2016-2016, Central Queensland University, Australia

Biodiesel Testing at Engine Tribology Laboratory, UM,, 2016-2016, Associate Professor Mohammad G. Rasul, Central Queensland University, Australia

Oil Lubricity Testing at UM Engine Tribology Laboratory with Ong Brothers Petroleum Sdn Bhd, 2016-2016, Ong Brothers Petroleum Sdn Bhd, Malaysia

Fuel additives testing at tribology lab department of Mechanical Engineering, UM, 2015-2015, International Islamic Univesity, IIUM, Malaysia

Biopro Additive testing on coal, 2015-2015, Eco Green Maintenance Sevices Sdn Bhd

Fuel additives testing at department of Mechanical Engineering, UM, 2015-2015, UKM, Malaysia

Biodiesel fuel testing at engine tribology laboratory, UM., 2008-2008, Mr. Kumaran Palannisamy Senior Lecturer Dept. of Mechanical Engineering

Fuel efficient booster testing at engine tribology laboratory, UM, 2008-2008, NEW WORLD MARKETING SDN BHD

Fuel additive testing at engine tribology laboratory,UM, 2008-2008, DXN BIOTECH CONSULTANTS SDN.BHD

Lubricant oil test (EVP oil) in multi cylinder engine, 2008-2008, ABEX MANUFACTURING SDN.BHD

Lubricant test at engine tribology laboratory, UM, 2007-2007, Quantum Global Trading Sdn Bhd

A detailed study on consumer behaviour towards electricity consumption and end uses of electricity in the industrial sector, 2006-2006, TENAGA NASIONAL BERHAD/National Electricity Board

Energy use in the transportation sector in Malaysia, 2004-2004, Economic Planning Unit in Collaboration with DANIDA of Denmark

Energy study in transportation sector in Malaysia, 2004-2004, Economic Planning Unit in Collaboration with DANIDA of Denmark

Study of NGV Usage in Malaysia, 2004-2004, Domestic Trade Division (KPDNHEP)

Survey on CNG usage in Malaysia, 2003-2003, Ministry of Domestic Trade and Consumer Affairs

Iron Oxide Pigments Production, 2003-2003, IOP Specialist Sdn Bhd

Contextual Learning Module for Mechanical Engineering Field, 2001-2001, METEOR-CORD International, USA-Ministry of Education Malaysia

AWARDS AND RECOGNITIONS
(Name of Award), (Awarding Institution), (Year Awarded), (Level).

2018 Top 1% Highly Cited Researcher , Clarivate Analytics, 2018, (International)

Emeritus Professor, University of Malaya, 2018, (University)

2017 Highly Cited Researcher in Recognition of Ranking Among The Top 1% of Researchers for Most Cited Document, in Engineering, Clarivate Analytics, 2017, (International)

Pecipta'17 Gold Medal, Ministry of Higher Education Malaysia, 2017, (International)

Merdeka Award for Outstanding Scholastic Achievement , Merdeka Award Trust, 2017, (National)

Professional Engineer, Malaysian Board of Engineer, 2016, (International)

Won Silver Medal Award At Invention & Innovation Awards, Malaysian Technology Expo 2016, Malaysian Association of Research Scientists (Mars), 2016, (National)

UM Excellence Award, Naib Canselor, 2015, (University)

Pecipta'15 Gold Medal, Ministry of Higher Education Malaysia, 2015, (International)

Pecipta Best Award, Ministry of Higher Education, 2015, (International)

University of Malaya Excellence Award 2015, University of Malaya, 2015, (University)

Research Fronts 2014, 100 Top Ranked Specialties in The Sciences and Social Sciences, The National Sciences Library, Chinese Academy of Sciences Thomson Reuters Ip & Science The Joint Research Center of Emerging Technology Analysis, 2014, (International)

Gold Medal - Malaysia Technology Expo 2014 (Mte 2014), Malaysia Association of Research Scientists (Mars), 2014, (National)

Top Research Scientist Malaysia (Trsm), Akademi Sains Malaysia, 2014, (National)

Fellow Institute of Mechanical Engineer Uk (Fimeche) & Ceng, Institute of Mechanical Engineer Uk, 2013, (International)

Silver Award for "Nano-Oil for a Greener Future" At Bioinnovations Awards 2013, Malaysian Association of Research Scientists, 2013, (National)

Best of The Best Award for "Diffuser Augmented Dual-Rotor Energy Recovery Wind Turbine Generator", University of Malaya, 2013, (University)

Bronze Prize for "Eco-Greenergy Interactive Outdoor Lighting System (Powered by Shroud Wind Turbine & Solar Panel), Korea Invention Promotion Association, 2013, (International)

Gold Prize for Invention of "Shroud-Augmented Dual-Rotor Exhaust Air Energy Recovery Wind Turbine Generator", Korea Invention Promotion Association, 2013, (International)

Gold Medal for The Invention/Innovation of "Eco-Greenergy Outdoor Lighting System", Malaysian Association of Research Scientists, 2013, (National)

Itex Gold Medal for The Invention "Smart Eco-Greenergy Wind-Solar Hybrid Charging Station for Electric Bicycle in Green Cities", Ministry of Science, Technology and Innovation, 2013, (National)

Diploma for The Participation At The International Trade Fair Iena 2012, Ideas-Inventions-New Products., International Trade Fair., 2012, (International)

Certificate of Excellent Service, University Malaya, 2009, (University)

Bronze Medal for Safety of Hydrogen Engine (UM Expo January 2009), University of Malaya, 2009, (University)

Excellence Service Award, University Malaya, 2008, (University)

Certificate of Excellent Service, University Malaya, 2008, (University)

Khidmat Setia 30 Award, 2008

Award of 30 Years Loyalty Service, University of Malaya, 2008, (University)

Excellence Award, University of Malaya, 2008, (University)

Refereed Journal Publication Special Award, 2007

Certificate of Excellent Service, University Malaya, 2007, (University)

Winner of Bronze Medal, Research, Invention and Innovation Expo 2007 (Ozone Friendly Refrigerant for Refrigerator), University of Malaya, 2007, (University)

Winner of Bronze Medal, Research, Invention and Innovation Expo 2007 (Natural Gas Powered Motorcycle), University of Malaya, 2007, (University)

Special Most Refereed Journal Award, University of Malaya, 2007, (University)

Certificate of Excellent Service, University Malaya, 2006, (University)

Winner of Gold Medal With Mention, 55th World Exhibition On Innovation, Research and New Technologies, (Brussels Eureka 2006) ¿ Cng/Di Group-Irpa Project, Brussels-Eureka, Cpe Exhibition, Brussels, Belgium, 2006, (International)

Winner of Special Award, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Cng/Di Group-Irpa Project, Mosti and Minds, Kuala Lumpur, 2006, (National)

Winner of Silver Medal, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Biofadd, Mosti and Minds, Kuala Lumpur, 2006, (International)

Winner of Special Award, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Cng/Di Group-Irpa Project, Mosti and Minds, Kuala Lumpur, 2006, (International)

Winner of Gold Medal, Research, Invention and Innovation Expo 2006 (Cng/Di), University of Malaya, 2006, (National)

Winner of Gold Medal, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (Itex 2006)-Cng/Di Group-Irpa Project, Mosti and Minds, Kuala Lumpur, 2006, (International)

Certificate of Excellent Service, University Malaya, 2005, (University)

Excellence Service Award, University Malaya, 2004, (University)

Excellence Service Award, University Malaya, 1998, (University)

Excellence Service Award, University Malaya, 1997, (University)

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).

Combustion Characteristics of Biological Fuel in Diesel Engine, SAE world congress, 2000-03-06 to 2000-03-09

Minimum Energy Efficiency Standards for Room Air Conditioners in Malaysia: Estimating Electricity Savings Possibilities, , Int. Conference on Domestic Use of Electrical Energy, (DUEE), 2000-04-18 to 2000-04-19

Energy conservation opportunities in household refrigerator in Malaysia, 51st International appliances technical conference (IATC) 2000, 2000-05-08 to 2000-05-10

Potential Electricity Savings by Implementing Energy Efficiency Standards for Household Electrical Appliances in Malaysia, World Renewable Energy Congress VI (WREC-2000), 2000-07-01 to 2000-07-07

Corrosion characteristics of palm oil methyl ester blended lubricant under tribocontact, Int. Tribology Conference, 2000-10-29 to 2000-11-02

Potential CO2 Reduction by Fuel Substitution to Generate Electricity in Malaysia, Regional World Renewable Energy Congress, 2001-02-19 to 2001-02-22

Potential energy conversion from palm oil wastes in Malaysia, Int. conf. On integrated renewable energy for regional development, 2001-08-21 to 2001-08-23

Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear, 2nd world tribology congress, 2001-09-03 to 2001-09-07

Coconut oil blended fuel as an alternative and renewable fuel for diesel engines, second International conference and 7th annual paper meet of the Mechanical Engineering Division, 2001-10-25 to 2001-10-27

Wear Surface Characteristics Study of Piston Ring and Ball Bearing Materials Under Palm Oil Methyl Ester Added Lubricant, 13th Int. Colloquium Tribology, 2002-01-15 to 2001-01-17

Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine wear, 13th Int. Colloquium Tribology, 2002-01-15 to 2002-01-17

An investigation on application of SPC tools in a medium sized manufacturing plant, 3rd Int. conf. On Quality and Reliability (ICQR2002), 2002-08-28 to 2002-08-31

Role of FT-IR in assessing lubricant degradation-A study on palm oil methyl ester blended lubricant, The Second Asia Int. Conf. On Tribology (ASIATRIB 2002), 2002-10-21 to 2002-10-24

Deposit formation and gaseous emissions of a small diesel engine when operated on crude palm oil emulsion, 2nd Regional Conference on Energy Technology towards a Clean Environment (RCETCE), 2003-02-12 to 2003-02-14

Performance of P10 TiN Coated Carbide Tools When End Milling AISI H13 Tool Steel At High Cutting Speed, Int. Conf. On Advances in Materials and Processing Technologies (AMPT 2003), 2003-07-08 to 2003-07-11

Performance and Emissions Analysis of Biodiesel from Palm Oil Powered Diesel Engine with Turbocharger, The 14th Int. Symposium on Transport Phenomena (ISTP-14) , 2003-07-17 to 2003-07-22

Viscometric Property of Several Vegetables Oils, The 14th Int. Symposium on Transport Phenomena (ISTP-14) , 2003-07-17 to 2003-07-22

Thermal stability and effect of variable shear rate and temperature on oquette flow viscosity of natural plant oil, Int. Conf. On Fluid and Thermal Energy Conversion 2003, 2003-12-07 to 2001-12-11

Development NOx emission predicted model for Palm Oil Methyl Ester fuelled diesel engine using Response Surface Methodology, World Renewable Energy Congress-VIII, 2004-08-28 to 2004-09-03, WREN and NREL-USA

The investigation of palm oil containing amine phosphate as an alternative lubricant, 1st Inter. Conf. On Advanced Tribology (ICAT 2004), 2004-12-01 to 2004-12-13, NUS-Singapore

The use of Palm Oil Methyl Ester (POME) blended additive on turbocharged diesel engine, 7th Asia Pacific International Symposium on Combustion and Energy Utilization, 2004-12-11 to 2204-12-14

Emissions Characteristics of a Modified CNG Gasoline-Cycle Engine, Proc. of Asia Pacific oil and gas conference and exhibition, 2005-04-05 to 2005-04-07

Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein and Aminephosphate Additives, World Tribology Congress (WTC III), 2005-09-12 to 2005-09-16

Thermal analysis of diesel engine cylinder head deposits while operated by diesel-water emulsion fuel, 18th Int. Internal Combustion Engine Symposium, 2005-12-20 to 2005-12-22

Performance improvement of a diesel engine using additive in palm oil methyl ester, Proc. 18th Int. Internal Combustion Engine Symposium, 2005-12-20 to 2005-12-22

The effect of oxidized and non-oxidised palm oil methyl ester (POME) on the stability properties during time of storage, Proc. 18th Int. Internal Combustion Engine Symposium, 2005-12-20 to 2005-12-22

Friction and wear properties of diamond-like-carbon coating on Ni-resist cast iron under wet and dry condition, Proc. of the 12th Nordic Symposium on Tribology, (Nordtrib 2006), 2006-06-07 to 2006-06-09

Lubricant quality assessment and wear of a biodiesel fueled engine, Proc. of the 3rd. Int. Conf. On Tribology (ASIATRIB 2006), 2006-10-16 to 2006-10-19

Performance assessment of Bi-Fuel engine using gasoline and compressed natural gas as fuel, Proc. of the 3rd BSME-ASME Int. Conf. On Thermal Engineering, 2006-12-20 to 2006-12-22

An application of energy and exergy analysis at the transportation sector of Malaysia, Proc. of the 3rd BSME-ASME Int. Conf. On Thermal Engineering, 2006-12-20 to 2006-12-22

Performance analysis of 1.6L Campro engine using Motec and OEM engine control unit, Proc. Int. Engineering Convention, 2007-03-10 to 2007-03-14

Friction and wear characteristics of biodiesel contaminated lubricants, Proc. 62nd Annual Meeting, STLE, 2007-05-06 to 2007-05-10

Energy and emissions analysis for household appliances in Malaysia, 22nd Euro conference on operation research, 2007-07-08 to 2007-07-11

Energy-efficient optical coating for flat glass, AUN/SEED-Net 11th Field-Wise Seminar for Materials Engineering on Nanomaterials & Biomaterials and composite for Engineering Application, 2007-11-15 to 2007-11-16

Pure Butane as Refrigerant in Domestic Refrigerator-Freezer, Second GMSRN International Conference 2007 , 2007-12-12 to 2007-12-14

Effects of Annealing Treatment on Optical Properties of Anatase TiO2 Thin Films, International Conference on Electric Power and Energy Systems, 2008-07-04 to 2008-07-06, World Academy of Science

Energy Savings Potential by Substituting Driving With Walking and Cycling for Short Distance, the 2008 International Mechanical Engineering Congress & Exposition, 2008-10-31 to 2008-11-06

Energy Analysis of Cooling Pump in Internal Combustion Engine, 2008 International Mechanical Engineering Congress & Exposition, 2008-10-31 to 2008-11-06, ASME

Wear and Friction Characteristics of Palm Oil Lubrication on Diamond-like Carbon Coating over Ni-resist Cast Iron, 2nd Int. Conference on Advanced Tribology 2008, 2008-12-03 to 2009-03-05

Energy and Electricity Consumption Analysis of Malaysian Industrial Sector, 4th International conference on thermal engineering: Theory and Application, 2009-01-12 to 2009-03-14

Performance and Emissions Characterization of Diesel Engine Running With Re-formulated Palm Oil Methyl Ester-Diesel Blended Fuel, 4th International conference on thermal engineering: Theory and Application, 2009-01-12 to 2009-03-14

Lubricity Study of Waste Cooking Oil, 1st Workshop on New/Renewable Energy, 2009-03-11 to 2009-03-13, AUN/SEED-Net

Thermal Systems Modeling and Simulation, SAE 2012 World Congress, 2012-04-24 to 2012-04-26, SAE International, (International)

An experimental investigation of the biodiesel stability by means of oxidation and property determination, The Energy & Materials Research Conference (EMR2012), 2012-06-20 to 2012-06-22, Spain Formatex Research Center , (International)

Impact of biodiesel on injector deposit formation, The 5th AUN/SEED-Net Regional Conference on New/Renewable EnergySchool of Transportation Engineering, 2012-09-26 to 2012-09-27, AUN/SEED-Net & Hanoi University of Science and Technology , (International)

Storage Stability of Biodiesel. International Symposium on Energy Technology and Strategy, International Symposium on Energy Technology and Strategy, ISETS 2012, 2012-11-22 to 2012-11-24, (International)

Experimental investigation into tribological characteristics of bio-lubricant formulated from jatropha oil., 5th BSME- ICTE, 2012-12-21 to 2012-12-23, BSME, (International)

Biofuel: policy, standardization and recommendation for sustainable future energy supply., The Mediterranean Green Energy Forum (MGEF-13), 2013-06-16 to 2013-06-20, KES UK

Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester, 41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY, 2014-09-01 to

The progress of biofuel towards achieving a sustainable world., Second International Conference on Electrical Engineering And Control Applications 2014 (ICEECA 2014), 2014-11-18 to 2014-11-20, Departement of Electronics, Faculty of sciences and Technology, University Constantine, Algeria, (International)

Clean and Efficient Utilization of Low-Rank Coals and Biomass by Solvent Treatment, SATREPS Workshop, 2016-03-01 to 2016-03-01, King Mongkut's University of Technology Thonburi, (International)

Basics of Tribology, the 4th Malaysia-Japan Tribology Symposium (MJTS) 2016, 2016-08-25 to 2016-08-26, TriPreM, UTM, (International)

Area of Specialisation

Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Industrial Tribology - Energy and Renewable Energy, Bio fuel, Bio diesel and Bio ethanol, Engine Performance and Emission, Environmental Engineering and Climate Change

Research Projects

Completed

2021 - 2023

Corrosive-wear Performance Evaluation of Automotive Component Materials Under Palm Oil Biodiesel Condition

On-Going

2022 - Present	Increasing the Performance and Service Life of a Diesel Engine Fuel Injector by Surface Modification
2021 - Present	Hybrid eSiC-graphene oxide coating mechanism on Ti-alloy to enhance properties using an additive manufacturing method

Award & Recognition

22 Dec, 2020	Reviewer of journal paper-FUEL - Elsevier Journal-FUEL	International
02 Dec, 2020	UM Committee member of Screening of External Assessor - University of Malaya	National
18 Nov, 2020	World Top 1% Highly Cited Researcher (HCR) - Web of Science Clarivate Analytics	International
01 Nov, 2020	World Top 2% Scientists - Stanford University USA	International
07 Jul, 2020	PhD External Examiner - Universiti Tun Hussein Malaysia	National
11 Feb, 2020	Member Environmental Impact Pillar, Science Outlook 2020. - Academy Science Malaysia (ASM)	International
22 Jan, 2020	Vice Chairman, PMPUM - Persatuan Mantan Professor Universiti Malaya	National
01 Jan, 2020	Fellow - MYTRIBOS (Malaysian Tribology Society)	International
05 Nov, 2019	Malaysia's Research Star Award (MRSA) 2019 - Ministry of Education Malaysia	International

Staff Directory

Masjuki Bin Haji Hassan (Prof. Dr.)

Expert Profile

Book

Chapter in Book

Article in Academic Journals

Proceeding

PRESENTATIONS(Title), (Event), (Date Presented), (Organiser), (Level).

Area of Specialisation

Research Projects

Completed

On-Going

Award & Recognition

PRESENTATIONS
(Title), (Event), (Date Presented), (Organiser), (Level).