Staff Directory
Academic Qualifications
- Ph.D in Materials Engineering - Doctor of Philosophy, University of Sheffield
Norhuda Hidayah Binti Nordin (Assoc. Prof. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
norhudahidayah@iium.edu.my
6541
Area of Specialisation
- Natural Science ~ Chemical Sciences ~ Organic Chemistry ~ Polymer Synthesis - Polymer synthesis
- Engineering Tech ~ Engineering And Technology ~ Metallurgy ~ Specialty Alloy - Alloy development Alloy catalyst
- Engineering Tech ~ Applied Sciences And Technologies ~ Aerospace ~ Advanced Materials-Composite Special Alloys - Metal catalyst for combustion and rocket propellant
Teaching Responsibilities
| COMPONENT DESIGN AND MATERIALS SELECTION | 2025/2026 2024/2025 2023/2024 2022/2023 |
| ENGINEERING CONCEPTUAL DESIGN | 2025/2026 2024/2025 2023/2024 2022/2023 |
| ENGINEERING DRAWING | 2020/2021 2019/2020 2018/2019 |
| ENGINEERING ECONOMICS AND MANAGEMENT | 2023/2024 |
| FAILURE ANALYSIS OF MATERIALS | 2025/2026 2024/2025 2023/2024 2021/2022 2020/2021 2019/2020 2018/2019 |
| FINAL YEAR PROJECT 2 | 2025/2026 2024/2025 |
| FINAL YEAR PROJECT I | 2019/2020 2018/2019 |
| FINAL YEAR PROJECT II | 2024/2025 2023/2024 2022/2023 2019/2020 |
| FUNDAMENTAL OF MANUFACTURING PROCESSES | 2024/2025 2022/2023 2021/2022 |
| HEAT TREATMENT AND MICROSTRUCTURE CONTROL | 2020/2021 2019/2020 |
| INTRODUCTION TO ENGINEERING WORKSHOP | 2025/2026 2024/2025 2023/2024 |
| MANUFACTURING PROCESSES | 2024/2025 |
| MATERIALS ENGINEERING LAB 1 | 2025/2026 2024/2025 2023/2024 2022/2023 2021/2022 |
| MATERIALS ENGINEERING LAB I | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
| MATERIALS PROCESSING TECHNOLOGY | 2025/2026 2024/2025 2023/2024 2022/2023 |
| MATERIALS SCIENCE AND ENGINEERING | 2021/2022 2020/2021 2019/2020 2018/2019 |
| MATERIALS SELECTION AND DESIGN | 2023/2024 2022/2023 |
| SEMINAR | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
| THERMODYNAMICS OF MATERIALS | 2020/2021 |
| TRANSPORT PHENOMENA | 2021/2022 |
| USRAH IN ACTION 1 | 2022/2023 2021/2022 |
| USRAH IN ACTION 2 | 2022/2023 |
Supervision
|
Investigation Of Energetic Additives Effect To Nozzle Erosion Rate In Hybrid Rocket Motor.
Ph.D
In Progress
Co-supervisor
|
|
Investigation Of Hydroxyl Terminated Poly-Butadiene Regression Rate Enhancement Doped With High Entropy Metallic Additives.
Master
Completed
2026
Co-supervisor
|
|
Investigation On Regression Rate Of 3d-Printed Polylactic Acid Doped With Energetic Metallic Additives In Hybrid Rocket Motor.
Master
Completed
2025
Co-supervisor
|
|
Enhancement Of The Regression Rate In Hybrid Rocket Motor Utilizing High Energetic Additives.
Master
Completed
2024
Main Supervisor
|
|
Development Of High Entropy Alloy (Hea) As Catalyst For Azo Dye Degradation.
Master
Completed
2023
Main Supervisor
|
|
Investigation Of End-Burning Type Hybrid Rocket Motor Doped With High Entropy Alloy
.
Master
Completed
2023
Co-supervisor
|
|
Investigation Of Hybrid Rocket Motor Performance By Utilizing Paraffin Wax Based With Energetic Additives.
Master
Completed
2023
Co-supervisor
|
|
Additively Manufactured Polylactic Acid Nested Skeleton Doped With Metallic Additives For Hybrid Rocket Fuel Grains.
Master
In Progress
Co-supervisor
|
|
Experimental Characterisation Of Aerolastic Behaviour In A Uav Wing Spar For Piezoelectric Energy Harvesting.
Master
In Progress
Co-supervisor
|
|
Numerical Modelling For A Multifunctional Wing Spar With Sensing And Harvesting.
Master
In Progress
Co-supervisor
|
Research Projects
Completed
| 2022 - 2023 | Bengkel Merekabentuk & Mencetak Prototaip Roket Menggunakan 3D Printer |
| 2021 - | DESIGN AND DEVELOPMENT OF SMOKEY SAM PROTOTYPE (TRL-6) - STAR (X) |
| 2021 - 2025 | Effect of Energetic Particles on Graphite Nozzle Erosion in Hybrid Rocket Motor |
| 2019 - 2023 | UNRAVELLING CATALYTIC MECHANISM OF HIGH ENTROPY ALLOYS (HEAs) FOR ENERGY-EFFICIENT AZO DYE REMOVAL IN FENTON REACTION |
| 2019 - 2024 | Regeneration behaviour of nanosilica with concrete waste via natural self-healing route for capturing CO2 |
| 2019 - 2024 | Investigating the immobilization of silver nanoparticle (AgNP) catalyst on activated carbon (AC) derived from durian's skin. |
| 2018 - 2022 | Engineering ultrasmall gold-silver alloy nanoparticles for antimicrobial application. |
On-Going
| 2025 - Present | Developing an Enhanced 3D-Printed Smokey Surface-to-Air Sounding Rocket (STAR-X-3) and Launching System for Pilot Training |
| 2024 - Present | ON THE PIEZOELECTRIC ENERGY HARVESTING POTENTIAL FROM AEROELASTIC VIBRATION OF LIFTING STRUCTURES EXERTED BY TURBULENCE AND CRUISING CONDITION |
| 2021 - Present | INVESTIGATION OF REGRESSION RATE ENHANCEMENT IN HYBRID ROCKET MOTOR UTILIZING HIGH ENTROPY ALLOYS ENERGETIC ADDITIVES |
| 2009 - Present | Advanced Materials and Surface Engineering (AMSERU) |
Publications
Articles
Conference or Workshop Items
Books
| 2025 | Proceeding of 6th International Conference on Advances in Manufacturing and Materials Engineering. Springer, ISBN: 978-981-96-3813-0 |
| 2025 | Proceeding of 6th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2024, 13–14 August, Kuala Lumpur, Malaysia. Springer, ISBN: 978-981-96-3813-0 |
Book Sections
| 2022 | Assisting liquid phase sintering of pure aluminum (Al) by the tin addition. In: IntechOpen, ISBN: 978-1-83968-730-3, pp. 99-113 |
| 2021 | Nano-indentation and indentation size effect on different phases in Lamellar structure high entropy alloy. In: CRC PRESS, ISBN: 978-0-367-68860-8, pp. 177-186 |