Article |
2021 |
A comparative study on the desiccant effect of polypropylene and polylactic acid composites reinforced with different lignocellulosic fibres. Journal of Applied Science and Engineering
, 24
(2)
pp.223-231
|
2020 |
Safer sanitary pads made from palm starch. Asia Research News
, 6th May 2020
|
2020 |
Effects of halloysite nanotubes (HNT) structures on antimicrobial activity on TPSS Film. Malaysian Journal of Microscopy
, 16
(2)
pp.119-127
|
2020 |
Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy
, 16
(2)
pp.112-118
|
2020 |
Allium sativum as antimicrobial agent in Thermoplastic Sago Starch (TPSS) films for dermal wound healing. Test Engineering and Management
, 83
(May-June)
pp.1014-1019
|
2020 |
Effects of silver nanoparticles concentration on
resistivity of PEDOT: PSS thin conductive films. Test Engineering and Management
, 83
(May - June 2020)
pp.1008-1013
|
2020 |
Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research
, 8
(2)
pp.355-361
|
2019 |
Mechanical properties of woven carbon fiber/kenaf fabric reinforced epoxy matrix hybrid composites. MALAYSIAN JOURNAL OF MICROSCOPY
, 15
(1)
pp.10-16
|
2019 |
Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science
, 15
pp.49-61
|
2018 |
Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology
, 1
(Special Issue 1)
pp.403-409
|
2018 |
Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal
, 19
(1)
pp.185-196
|
2018 |
Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology
, 13
(Issue Special Issue on WRICET (2016))
pp.86-93
|
2018 |
Non-acidic method for isolation of microcrystalline cellulose
from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology
, 7
(4014)
pp.339-342
|
2017 |
Effects of pressing temperature and pressing time onto the properties of binderless particleboard made from rattan furniture waste. Journal of Built Environment, Technology And Engineering (JBETE)
, 3
pp.11-18
|
2017 |
Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science
, 29
(4)
pp.485-492
|
2016 |
Optimization of natural fiber composite parameter using Taguchi approach . Advanced Materials Research
, 1133
pp.185-188
|
2016 |
Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC)
pp.6-13
|
2016 |
A review of natural fibers and processing operations for the production of binderless boards. BioResources
, 11
(2)
pp.5600-5617
|
2016 |
Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC)
, 4
pp.1-7
|
2016 |
Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences
, 4
pp.18-25
|
2015 |
Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research
, 1115
pp.275-278
|
2015 |
Characterization and preparation of sago starch (SS) based reinforced with silver nanoparticle (SNP)
. Advanced Materials Research
, 1115
pp.369-372
|
2015 |
Characterization of rattan waste for binderless particleboard (BPB) production. Advanced Materials Research
, 1115
pp.317-320
|
2015 |
Study of mechanical and flammability properties of polypropylene/microcrystalline cellulose composites filled with nano-sized aluminium hydroxide (ATH) particles. Advanced Materials Research
, 1115
pp.402-405
|
2015 |
Swelling properties of gamma irradiated starch based hydrogel dressing. International Journal of Innovative Science, Engineering & Technology
, 2
(8)
pp.933-936
|
2015 |
The effect of black liquor on rattan waste binderless
board (BPB) produced via digestion-hot pressing (DHP)
process
. ARPN Journal of Engineering and Applied Sciences
, 10
(21)
pp.9753-9758
|
2015 |
Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach
. Advanced Materials Research
, 1115
pp.238-242
|
2015 |
Gamma irradiated starch based hydrogel impregnated with silver nanoparticle. Advanced Materials Research
, 1115
pp.390-393
|
2015 |
Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research
, 1115
pp.166-169
|
2015 |
Mechanical and physical properties of sago starch/halloysite nanocomposite film. Advanced Materials Research
, 1115
pp.394-397
|
2015 |
Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM)
, 13
(2)
pp.11-13
|
2014 |
Holly Qur'an: the key reference of materials. Science International Lahore
, 26
(5)
pp.2033-2035
|
2014 |
Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore
, 26
(5)
pp.2569-2575
|
2014 |
Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals
, 603
(1)
pp.180-193
|
2014 |
Evaluation of Kenaf Fibres Reinforced Starch Based Biocomposite Film through Water Absorption and Biodegradation Properties . Journal of Engineering Science
, 10
pp.31-39
|
2014 |
Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology
, 8
(3)
pp.792-796
|
2014 |
Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals
, 603
(1)
pp.173-179
|
2014 |
Preparation and characterization of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites and their hybrid composites with halloysite clay. Advances in Environmental Biology
, 8
(3)
pp.704-711
|
2014 |
Effect of kenaf fibre on starch based biopolymer composite. Advances in Environmental Biology
, 8
(3)
pp.765-769
|
2014 |
Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering
, 53
pp.107-113
|
2013 |
Low Density Polyethylene (LDPE)/ Thermoplastic Sago Starch (TPSS) blend Filled Kenaf Core Fiber (KCF). Advanced Materials Research
, 626
pp.1048-1053
|
2013 |
The effects of initiator content on sago (metroxylon rottb.) starch-G-PAN hydrogel . Advanced Materials Research
, 683
pp.218-221
|
2013 |
The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science
, 24
(2)
pp.97-115
|
2012 |
Integrating and infusing of Islamic values in the existing engineering course subject: a case study. Advances in Natural and Applied Sciences
, 6
(5)
pp.625-632
|
2012 |
Properties of montmorillonite-reinforced thermoplastic
sago starch composites
. Advanced Materials Research
, 445
pp.469-474
|
2012 |
Effect of fiber loading on properties of thermoplastic sago starch/kenaf core fiber biocomposites. BioResources
, 7
(3)
pp.4294-4306
|
2012 |
Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite
. Journal of Thermoplastic Composite Materials
, 25
(2)
pp.153-164
|
2012 |
Morphological study of Superabsorbent polymer hydrogels
from sago starch. Advanced Materials Research
, 576
pp.338-341
|
2012 |
The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal
, 19
(2)
pp.715-719
|
2012 |
Rheological behavior and stability of cassava starch for ceramic mould binder application. Advanced Materials Research
, 576
pp.162-165
|
2012 |
The study of glycerol plasticized thermoplastic sago starch. Advanced Materials Research
, 576
pp.289-292
|
2012 |
Properties of sago starch-nanoclay biocomposites film. Advanced Materials Research
, 576
pp.480-483
|
2011 |
Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering
, 42
pp.462-465
|
2011 |
Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers
, 8
(1)
pp.14-26
|
2011 |
Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal
, 6
(1)
pp.51-57
|
2011 |
Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal
, 12
(1)
pp.63-75
|
2011 |
Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials
, 471-72
pp.403-408
|
2011 |
Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research
, 265
pp.760-764
|
2011 |
The study of biodegradable thermoplastics sago starch. Key Engineering Materials
, 471
pp.397-402
|
2011 |
Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials
, 471
pp.781-785
|
2011 |
Islamisation of engineering education in International Islamic
University Malaysia (IIUM): problems and prospect. Revelation and Science
, 1
(3)
pp.131-137
|
2011 |
Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical
properties. Asia-Pacific Journal of Chemical Engineering
, 6
pp.863-869
|
2011 |
Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials
, 472-72
pp.928-932
|
2011 |
The effect of fiber content on cotton reinforced albumen composites . IIUM Engineering Journal
, 12
(2)
|
2011 |
Properties of compression moulding starch-nanoclay biocomposites. World Journal of Engineering
, 8
(Supp.1)
pp.1377-1378
|
2010 |
Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering
, 8
pp.1-7
|
2008 |
Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research
, 47
pp.1189-1192
|
2007 |
Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design
, 28
pp.71-77
|
Conference or Workshop Item |
2020 |
Low cost piezoresistive pressure sensor matrix for pressure ulcer prevention and management.
In: 2019 7th International Conference on Mechatronics Engineering (ICOM) 2019
|
2019 |
Electrical stimulation in combating pressure ulcer for immobilize subjects: a conceptual framework.
In: International Conference on Biomedical Engineering
|
2018 |
Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber.
In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018)
|
2018 |
Influence of fiber treatment on dimensional stabilities of
rattan waste composite boards.
In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
|
2017 |
Analysis of design tool attributes with regards to sustainability benefits.
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
|
2017 |
Physical properties of heat-treated rattan waste binderless particleboard.
In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016
|
2016 |
Fungi growth on rattan board exposed to natural weathering.
In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
|
2016 |
Sustainable manufacturing framework from Islamic perspective.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
2016 |
Development of integrated curriculum and teaching materials for science/engineering courses.
In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016
|
2015 |
Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique.
In: 3rd International Doctoral Student Symposium with Partner Universities
|
2015 |
Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications.
In: Malaysian International Tribology Conference 2015
|
2014 |
Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application.
In: Malaysia Technology Expo 2014
|
2014 |
Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique
.
In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014)
|
2013 |
Creativity and the future of engineering education: making the strange familiar.
In: International Conference on Engineering Education 2013
|
2012 |
Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles.
In: International Conference on Nanotechnology (ICONT 2012)
|
2011 |
The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite.
In: International Conference on Advanced Manufacturing of Composites (ICMAC)
|
2011 |
Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components.
In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
|
2011 |
Eco-friendly PLA-kenaf fibre biocomposite for food packaging.
In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
|
2011 |
Eco-friendly PLA-kenaf fibre biocomposite for food packaging
.
In: Malaysia Technology Expo (MTE 2011)
|
2011 |
Integrating Tawhidi values into science and engineering education: a case study.
In: International Conference on Islamization in Modern Science and Scientification of Islamic Studies: Prospects and Bridges
|
2011 |
Properties of compression moulding starch - nanoclay biocomposites .
In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19)
|
2011 |
Properties of montmorillonite-reinforced thermoplastic
sago starch composites
.
In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
|
2011 |
Integrating and infusing of Islamic values in the existing engineering course subject: A case study
.
In: The 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11)
|
2011 |
The effect of water and citric acid on sago starch bio-plastics.
In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
|
2011 |
Study of new eco-core metal matrix composite sandwich structure.
In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
|
2011 |
Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite powder.
In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011
|
2011 |
Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite.
In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
|
2010 |
Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment.
In: Malaysian Science and Technology Congress (MSTC 2010)
|
2010 |
Hazardless nanocomposite for gas barrier potential.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
2010 |
Lightweight biodegradable cotton/albumen board (CAB) for sustainable environment.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
2010 |
Single kenaf fibre properties via in situ monitoring using acoustic emission.
In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM)
|
2010 |
Kenaf fibre reinforced poly(lactic acid) biocomposites.
In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition
|
2010 |
Renewable food packaging from PLA-kenaf fibre biocomposite.
In: Islamic Innovation Expo 2010 (i-Inova’ 2010)
|
2010 |
An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
2009 |
Effects of nanoclays on the structure and properties of cotton/albumen composites .
In: 2nd Annual International Conference on Green Technology and Engineering
|
Book Section |
2018 |
Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study.
In: Rejuvenating Islamic thought
IIUM Press, International Islamic University Malaysia
. ISBN 978-967-491-010-5
, pp.152-166
|
2012 |
Surface properties and thermal behavior of Malaysian coir fiber.
In: Materials in Engineering in Health Sciences
Universiti Sains Malaysia
. ISBN 978-983-861-533-4
, pp.1-7
|
2011 |
Investigation on the effect of water immersion on cotton albumen composite.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.178-181
|
2011 |
The effect of fibre content on thermal property of coir fibre reinforced cement-albumen composite.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.172-177
|
2011 |
Workability of coir fibre-reinforced cement-albumen composite.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.195-200
|
2011 |
Foam impregnation method for artificial bone graft application : study on the effect of drying time.
In: Advances in Materials Engineering - Volume 2
IIUM Press
. ISBN 9789674181680
, pp.78-83
|
2011 |
Foam impregnation method for artificial bone graft application: study on the effect of sintering temperature.
In: Advances in Materials Engineering - Volume 2
IIUM Press
. ISBN 9789674181680
, pp.84-88
|
2011 |
Mechanical behaviour of Oil Palm Empty Fruit Bunch (OPEFB) albumen-composites concrete.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.49-54
|
2011 |
The influence of biopolymer and natural fiber on the physical and mechanical properties of cement composite.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.55-61
|
2011 |
Thermal and morphological study of Biopolymer Cotton-Albumen Clay (BCAC) composites.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.62-67
|
2011 |
Effect of compaction time on the properties of coir fiber reinforced cement-albumen composite.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.68-73
|
2011 |
Oil Palm Empty Fruit Bunch (OPEFB) for lightweight composites concrete
.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.74-79
|
2011 |
Sago, its properties and applications: a review.
In: SAGO (Metroxylan rottb) and its applications
IIUM Press
. ISBN 9789674181635
, pp.1-15
|
2011 |
Overview on Malaysia natural fibres and its applications
.
In: Malaysia natural fibers for diversed bio-based application
IIUM Press
. ISBN 9789674180218
, pp.1-19
|
2011 |
Malaysian coir fibre for acoustical absorption cement composite panel .
In: Malaysia natural fibers for diversed bio-based application
IIUM Press
. ISBN 9789674180218
, pp.39-48
|
2011 |
Sago starch: nanoclay biocomposites film.
In: SAGO (Metroxylan rottb) and its applications
IIUM Press
. ISBN 9789674181635
, pp.87-99
|
2011 |
Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites .
In: SAGO (Metroxylan rottb) and its applications
IIUM Press
. ISBN 9789674181635
, pp.101-114
|
2011 |
Comparative study between standard and commercial sago starch.
In: SAGO (Metroxylan rottb) and its applications
IIUM Press
. ISBN 9789674181635
, pp.17-26
|
2011 |
Investigation on the effect of ultra violet on cotton albumen composite.
In: Advances in materials engineering - Volume 2
IIUM Press
. ISBN 9789674181680
, pp.96-99
|
2011 |
The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.108-113
|
2011 |
An investigation of hybrid composites tubes subjected to quasi-static loading.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.138-143
|
2011 |
Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.144-149
|
2011 |
SEM analysis of coir fiber and coir fiber-albumen-concrete before and after surface treatments.
In: Manufacturing management from basic machining to quality product
IIUM Press
. ISBN 9789674181659
, pp.220-229
|