Article |
| 2022 |
Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal
, 23
(1)
pp.412-423
|
| 2021 |
Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation
, 53
(2)
pp.193-199
|
| 2021 |
Experimental Investigation of Oil-Water Two-Phase Flow in Horizontal, Inclined, and Vertical Large-Diameter Pipes: Determination of Flow Patterns, Holdup, and Pressure Drop. SPE Production & Operations
, 36
(4)
pp.946-961
|
| 2021 |
A review of piezoelectric material-based structural control and health monitoring techniques for engineering structures: challenges and opportunities. Actuators
, 10
(5)
pp.1-26
|
| 2021 |
Estimation of stress intensity factor reduction for a center-cracked plate integrated with piezoelectric actuator and composite patch. Thin Walled Structures
, 158
pp.1-15
|
| 2021 |
A systematic review of piezoelectric materials and energy harvesters for industrial applications. Sensors
, 21
(12)
pp.1-27
|
| 2020 |
Regression analysis of masked competing risks data under cumulative incidence function framework. Austrian Journal of Statistics
, 49
(3 (Special Issue))
pp.25-29
|
| 2020 |
A Bayesian approach to competing risks model with masked causes of failure and incomplete failure times. Mathematical Problems in Engineering
, 2020
(Article ID 8248640)
pp.1-7
|
| 2020 |
Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. Materials Today: Proceedings
, 27
(2)
pp.1713-1719
|
| 2020 |
Experimental study to evaluate the environmental impacts of disposed produced water on the surrounding ecosystems. International Journal of Environmental Science and Technology
, 17
(3)
pp.1439-1454
|
| 2019 |
Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE)
, 7
(6S)
pp.235-240
|
| 2019 |
Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE)
, 7
(6S)
pp.241-245
|
| 2019 |
Optimization of incremental sheet metal forming process using grey relational analysis. International Journal of Recent Technology and Engineering (IJRTE)
, 7
(6S)
pp.246-252
|
| 2019 |
A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT)
, 8
(3S)
pp.749-753
|
| 2019 |
Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE)
, 8
(6S4)
pp.1139-1148
|
| 2019 |
Effect of flow patterns on two-phase flow rate in vertical
pipes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 55
(2)
pp.150-160
|
| 2019 |
Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer
, 55
(8)
pp.2137-2151
|
| 2019 |
Experimental investigation of high‑viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient. Journal of Petroleum Exploration and Production Technology
, 9
pp.2911-2918
|
| 2019 |
Experimental investigation of gas–oil–water phase flow in vertical pipes: influence of gas injection on the total pressure gradient. Journal of Petroleum Exploration and Production Technology
, 9
(4)
pp.3071-3078
|
| 2019 |
Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal
, 20
(2)
pp.211-221
|
| 2018 |
A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering
, 171
pp.1378-1389
|
| 2018 |
Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters
, 10
(2)
pp.18-27
|
| 2018 |
Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures
, 29
(18)
pp.3656-3666
|
| 2018 |
Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies
, 11
(11)
pp.1-23
|
| 2018 |
Evaluating the reduction of stress intensity factor in
center-cracked plates using piezoelectric actuators. Actuators
, 7
(2)
pp.1-13
|
| 2018 |
Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture
, 3
(1)
pp.9-17
|
| 2018 |
Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development
, Special issue
pp.238-243
|
| 2018 |
Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation
, 3
(4 (September-October))
pp.160-186
|
| 2018 |
Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development
, 2018
(Special Issue)
pp.249-255
|
| 2017 |
Using electromechanical impedance and extreme learning
machine to detect and locate damage in structures. Journal of Nondestructive Evaluation
, 36
(2)
pp.1-10
|
| 2017 |
Modeling approach to evaluating reduction in stress intensity factor in center-cracked plate with piezoelectric actuator patches. Journal of Intelligent Material Systems and Structures
, 28
(10)
pp.1334-1345
|
| 2017 |
Numerical investigation of springback in mechanical clinching process. International Journal of Engineering Materials and Manufacture
, 2
(4)
pp.86-93
|
| 2016 |
Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology
, 82
(1-4)
pp.179-195
|
| 2016 |
Recent and future development of the application of finite element analysis in clinching process. International Journal of Advanced Manufacturing Technology
, 84
(9)
pp.2589-2608
|
| 2016 |
Analysis of partly interval-censored data under competing risks framework. International Journal of Computer Science and Network Security
, 16
(8)
pp.25-28
|
| 2016 |
Multi-objective optimization of clinching joints quality using Grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology
, 87
pp.233-249
|
| 2016 |
Nonparametric estimate based on imputations techniques for interval and partly interval censored data . Science International Lahore
, 28
(2 (Section A))
pp.879-884
|
| 2016 |
Reliability analysis of multiphase flow measurements in different oil fields. Oil Gas European Magazine
, 42
(3)
pp.133-139
|
| 2016 |
Kinetics of mullite formation from kaolinite and boehmite. Molecular Crystals and Liquid Crystals
, 628
(1)
pp.55-64
|
| 2016 |
Modelling and simulation of impedance-based damage monitoring of structures. International Journal of Simulation Modelling
, 15
(3)
pp.395-408
|
| 2015 |
Survey of active structural control and repair using piezoelectric patches. Actuators
, 4
pp.77-98
|
| 2015 |
Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research
, 1115
pp.517-522
|
| 2015 |
Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research
, 1115
pp.539-542
|
| 2015 |
Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research
, 1115
pp.109-112
|
| 2015 |
Effects of adhesive bond on active repair of aluminium plate using piezoelectric patch. Applied Mechanics and Materials
, 799-80
pp.788-793
|
| 2015 |
Damage detection in structures using electromechanical impedance and finite element analysis. Applied Mechanics and Materials
, 799-80
pp.971-975
|
| 2015 |
Development of a novel method to estimate fluid flow rate in oil wells using electrical submersible pump. Journal of Petroleum Science and Engineering
, 135
pp.466-475
|
| 2015 |
Nondestructive evaluation of welded joints using digital image correlation. Journal of Nondestructive Evaluation
, 34
(4)
pp.1-12
|
| 2015 |
The effect of piezoelectric actuation on stress distribution in aluminum plate with circular hole. ARPN Journal of Engineering and Applied Sciences
, 10
(21)
pp.9723-9729
|
| 2015 |
Stress analysis of thin-walled laminated composite beams. ARPN Journal of Engineering and Applied Sciences
, 10
(21)
pp.10088-10095
|
| 2015 |
Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal
, 16
(2)
pp.31-42
|
| 2015 |
Some methods for competing risks with and without masked cause of failure: a short review. Science International Lahore
, 27
(2)
pp.1197-1201
|
| 2014 |
Significant parameters for the surface roughness in
incremental forming process. Materials and Manufacturing Processes
, 29
(6)
pp.697-703
|
| 2013 |
Design and modelling of silicon MEMS accelerometer. International Journal of Engineering Systems Modelling and Simulation
, 5
(4)
pp.181-187
|
| 2013 |
Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research
, 13
pp.103-108
|
| 2012 |
Improvement of greenhouse by reducing gas emissions using replacement policy. International Journal of Energy Technology and Policy
, 8
(3/4/5/)
pp.323-335
|
| 2012 |
Potential for improving vehicle fuel efficiency and reducing
the environmental pollution via fuel ionization. International Journal of Environmental Science and Technology
, 9
(3)
pp.495-502
|
| 2012 |
Finite element investigation of some aspects
affecting the depth and wall thickness of a part
formed by single point incremental forming process. International Journal of Engineering Systems Modelling and Simulation
, 4
(4)
pp.169-173
|
| 2012 |
Efficient cryogenic cooling during machining of rolled AISI 4340 steel. Advanced Materials Research
, 576
pp.123-126
|
| 2012 |
Monitoring of fatigue damage using ultrasonics and finite element analysis. Advanced Materials Research
, 576
pp.655-658
|
| 2012 |
Analysis of thermal stress intensity factors for edge cracked bimaterial system. Advanced Materials Research
, 576
pp.766-769
|
| 2012 |
Detection of foreign bodies in canned foods using ultrasonic testing. International Food Research Journal
, 19
(2)
pp.543-546
|
| 2012 |
Comparison of diesel emission experiments in view of
the environment: a case study at Dubai. International Journal of Management Science and Engineering Management
, 7
(1)
pp.36-42
|
| 2011 |
Predicting density distribution in Green compacts using finite element simulations. Australian Journal of Basic and Applied Sciences
, 5
(3)
pp.60-68
|
| 2011 |
Signal analysis of vibration measurements for condition monitoring of bearings. Australian Journal of Basic and Applied Sciences
, 5
(1)
pp.70-78
|
| 2011 |
Process simulation and quality evaluation of incremental sheet forming. IIUM Engineering Journal
, 12
(3)
pp.185-196
|
| 2011 |
Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes
, 26
pp.1404-1414
|
| 2011 |
Modeling the powder compaction process using the finite element method and inverse optimization
. The International Journal of Advanced Manufacturing Technology
, 56
(5-8)
pp.631-647
|
| 2010 |
Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study . Journal of Thermophysics and Heat Transfer
, 24
(1)
pp.165-172
|
| 2009 |
On the characteristics of multistage evacuated solar distillation. Renewable Energy
, 34
pp.1471-1478
|
| 2009 |
Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties. Advanced Powder Technology
, 20
(6)
pp.548-553
|
| 2009 |
Edge-cracked bimaterial systems under thermal heating. International Journal of Solids and Structures
, 46
(7-8)
pp.1648-1658
|
| 2009 |
Statistical Signal Processing and Sorting for Acoustic Emission Monitoring of High-Temperature Pressure Components. Experimental Techniques
, 33
(5)
pp.35-43
|
| 2009 |
Using acoustic emission and fractography to evaluate defects induced by corrosive environment. Corrosion Engineering, Science and Technology
, 44
(4)
pp.251-260
|
| 2006 |
Design and development of sensor based traffic light system. American Journal of Applied Sciences
, 3
(3)
pp.1745-1749
|
Conference or Workshop Item |
| 2021 |
Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
| 2021 |
Numerical Simulation of Electromechanical Impedance-Based Damage Monitoring of Metallic Structures.
In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
| 2021 |
Temperature influence on electromechanical impedance method used for damage detection in metallic structure.
In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
| 2021 |
Numerical modelling and applied simulation for the vibration monitoring of a ventilation turbine.
In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
| 2021 |
Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density.
In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21)
|
| 2020 |
Damage assessment on numerical modelling of rotating engine blades subjected to bird strike.
In: International Symposium on Sustainable Aviation (ISSA 2020)
|
| 2020 |
Stress analysis of plate with opposite semicircular notches and adhesively bonded piezoelectric actuators.
In: 45th International Conference on Vibroengineering
|
| 2020 |
Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method.
In: 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020
|
| 2018 |
Modeling different repair configurations of an aluminum
plate with a hole.
In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18)
|
| 2018 |
Determination of stress intensity factor of actuated cracked aluminum plate using strain gages.
In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018)
|
| 2018 |
Multi-objective optimization of incremental sheet metal forming.
In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18)
|
| 2018 |
Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling.
In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018)
|
| 2017 |
Validation of ESP oil wells measured parameters using simulation olga software.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Impedance based detection of delamination in composite structures.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Parametric model based on imputations techniques for partly
interval censored data.
In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017
|
| 2017 |
3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016.
In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016"
|
| 2016 |
Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
|
| 2015 |
Finite element modeling of clinching process for joining dissimilar materials.
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
|
| 2015 |
Finite element simulation of electro-mechanical impedance technique.
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
|
| 2015 |
Aerodynamic performance of a naca 23012 half wing model with a reverse delta wing type add-on device
.
In: 8th Ankara International Aerospace Conference
|
| 2014 |
Derivation of stress intensity factor for a cracked plate with an integrated piezoelectric actuator.
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
|
| 2014 |
A battery charge balancing system with reducing inrush high spike current for electric vehicle.
In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014)
|
| 2013 |
Study of hardness and microstructure of Fe-C-Si-Mn-B hardfacing alloy.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013)
|
| 2013 |
An investigation of temperature effect on incremental forming.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013)
|
| 2013 |
Penang bridge 1 loading analysis using British standard and finite element method for structural health monitoring.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013)
|
| 2013 |
Design and optimization of a micro capacitive pressure sensor.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013)
|
| 2013 |
Course Continual Quality Improvement (CQI) implementation of Outcome-Based Education (OBE) in engineering education: the Kulliyyah of Engineering, IIUM experience.
In: International Conference on Engineering Education 2013
|
| 2012 |
Design and simulation of a thermoelectric cooling system for motorcyclist helmet.
In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE’2012)
|
| 2011 |
Detection of foreign bodies in canned foods using ultrasonic testing.
In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
|
| 2011 |
Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process.
In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11
|
| 2011 |
Design and modeling of silicon MEMS accelerometer.
In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11
|
| 2010 |
Towards automatic testing and defect recognition in magnetic particle inspection.
In: The 2nd International Conference on Engineering and ICT
|
| 2010 |
Ultrasonic techniques for detection of thinning defects in metal plates.
In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment
|
| 2010 |
Development of an adaptive headlamp system.
In: International Conference on Computer and Communication Engineering (ICCCE 2010)
|
| 2010 |
Risk analysis factors of the emission in transportation a case study - Dubai taxi.
In: 2nd International Conference on Engineering Systems Management and its Applications (ICESMA2010)
|
| 2010 |
Signal analysis of vibration measurements for condition monitoring of bearings.
In: International Conference on Mathematical Applications in Engineering (ICMAE’10)
|
| 2010 |
Predicting density distribution in green compacts using finite element simulations.
In: International Conference on Mathematical Applications in Engineering (ICMAE’10)
|
| 2009 |
Development of a system for automatic magnetic particle inspection of automotive components .
In: Proceedings of 2nd CUTSE International Conference 2009 CUTSE'09
|
Book Section |
| 2019 |
Gas–liquid two-phase upward flow through a vertical pipe.
In: Selected Problems in Fluid Flow and Heat Transfer
MDPI
. ISBN 978-3-03921-427-3
, pp.198-220
|
| 2017 |
Effect of periodic drying on energy utilization, product quality, and drying time.
In: Intermittent and nonstationary drying technologies: principles and applications
CRC Press - Taylor & Francis Group
. ISBN 9781138746299
, pp.19-32
|
| 2016 |
Drying of fruits and vegetables: The impact of different drying methods on product quality.
In: Advances in Heat Pump-Assisted Drying Technology
CRC Press
. ISBN 978-1-4987-3499-8
, pp.189-215
|
| 2014 |
Edge Crack, Bimaterial Systems.
In: Encyclopedia of Thermal Stresses
Springer Reference
. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)
, pp.1085-1092
|
| 2014 |
Edge crack, composite materials.
In: Encyclopedia of Thermal Stresses
Springer Reference
. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)
, pp.1092-1100
|
| 2014 |
Edge crack, isotropic material.
In: Encyclopedia of Thermal Stresses
Springer Reference
. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)
, pp.1100-1109
|
| 2011 |
Overview of the powder metallurgy process .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.151-155
|
| 2011 |
Mechanical properties of sintered aluminum alloy compacts .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 978-967-418-174-1
, pp.156-160
|
| 2011 |
Numerical simulation of green compacts .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 978-967-418-174-1
, pp.161-166
|
| 2011 |
Experimental studies of dieless forming .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.167-171
|
| 2011 |
Study of spot welding process .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.172-176
|
| 2011 |
General framework for inverse identification of consecutive parameters.
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.177-182
|
| 2011 |
Inverse parameter identification of elastic and inelastic constitutive material models .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.183-188
|
| 2011 |
Enhancing magnetic particle testing of automotive parts .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.189-195
|
| 2011 |
Development of automatic magnetic particle system for automotive parts inspection.
In: Engine and auxiliary systems
IIUM Press
. ISBN 978-967-418-216-8
, pp.160-165
|
| 2011 |
Performance of an automatic magnetic particle inspection of automotive parts.
In: Engine and Auxiliary Systems
IIUM Press
. ISBN 978-967-418-216-8
, pp.166-171
|
| 2011 |
Finite element modeling of the powder compaction process. .
In: Advanced Numerical Techniques in Engineering and Science
IIUM Press
. ISBN 978-967-418-020-1
, pp.203-252
|
| 2011 |
Thermal analysis of a micro device used for detection of colorectal cancer.
In: Alternative energy
IIUM Press
. ISBN 9789674181581
, pp.220-228
|
| 2011 |
Corrosion detection in aircraft structures by ultrasonic method..
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.45-54
|
| 2011 |
Fatigue damage characterization of aluminum alloy plates.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.55-62
|
| 2009 |
An Integrated approach of ethics and professional issues into engeneering curriculum..
In: Ethics of engineering education
IIUM Press
. ISBN 9789833855674
, pp.275-281
|
