Researchers

Researchers

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Hadi Purwanto
Associate Professor

Print CV Email Me

Staff Details

ADVANCED METALLIC MATERIALS 2020/2021
ADVANCED THERMODYNAMICS OF MATERIALS 2009/2010 2010/2011 2011/2012 2012/2013
CORROSION AND DEGRADATION 2016/2017 2017/2018 2021/2022
CORROSION PROCESSES AND PROTECTION 2019/2020 2020/2021
Corrosion and Degradation 2018/2019 2019/2020 2020/2021
ENGINEERING MATERIALS 2008/2009
Extractive and Physical Metallurgy 2020/2021 2021/2022
FAILURE ANALYSIS OF MATERIALS 2008/2009 2009/2010
FINAL YEAR PROJECT I 2018/2019 2019/2020
FINAL YEAR PROJECT II 2019/2020
HEAT TREATMENT 2013/2014
INTRODUCTION TO ENGINEERING WORKSHOP 2021/2022
MATERIALS CHARACTERIZATION AND NON-DESTRUCTIVE TESTING 2016/2017 2017/2018
MATERIALS ENGINEERING LAB V 2013/2014
MATERIALS LABORATORY 2008/2009
NDT AND EVALUATIONS 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018
NONDESTRUCTIBE TESTING OF MATERIALS 2020/2021
NONDESTRUCTIVE EVALUATION OF STRUCTURES 2009/2010
NONDESTRUCTIVE TESTING OF MATERIALS 2011/2012 2012/2013 2018/2019
NONDESTUCTIVE TESTING AND EVALUATION 2008/2009 2009/2010 2010/2011 2013/2014
PRODUCTION OF FERROUS & NON FERROUS METALS 2008/2009
PRODUCTION OF FERROUS AND NON-FERROUS 2008/2009 2010/2011 2011/2012 2012/2013
PRODUCTION OF METALS 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019
PROJECT I 2009/2010 2010/2011 2011/2012
THERMODYNAMICS OF MATERIALS 2008/2009 2009/2010 2014/2015
WORKSHOP TECHNOLOGY 2010/2011 2011/2012 2012/2013 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020 2020/2021
In Progress
2019 - Present Environmental friendly municipal solid waste (MSW) leachate treatment using hydrothermal treatment processing (HTTP)
2019 - Present Investigation on cement clinker production using waste heat from molten blast furnace slag
2019 - Present Investigation on cement clinker production using waste heat from molten blast furnace slag
2019 - Present Environmental friendly municipal solid waste (MSW) leachate treatment using hydrothermal treatment processing (HTTP)
2009 - Present Advanced Materials and Surface Engineering (AMSERU)
2009 - Present Advanced Materials and Surface Engineering (AMSERU)
Completed
2017 - 2017 Metallurgical Study of Keris and It's Preservation Technique
2017 - 2017 Metallurgical Study of Keris and It's Preservation Technique
2013 - 2016 Development of Carbon Infiltrated Iron Ore using Bio-tar from Sawdust Pyrolysis
2013 - 2016 Development of Carbon Infiltrated Iron Ore using Bio-tar from Sawdust Pyrolysis
2012 - 2021 Pilot Plant Production of Carbon-Doped Iron Ore Using Agro-Residues as Source of Energy and Processing Material
2012 - 2015 Upscalling of Zero Emission Process for Hydrogen and Alumina Productions from Waste Management
2012 - 2016 Development process and manufacturing of modern medical implants (Maxillofacial Surgery )using rapid prototyping technology
2012 - 2016 Development process and manufacturing of modern medical implants (Maxillofacial Surgery )using rapid prototyping technology
2012 - 2015 Upscalling of Zero Emission Process for Hydrogen and Alumina Productions from Waste Management
2011 - 2012 Probability Safety Assessment for Nuclear Power PLant (KVC Project 2011)
2011 - 2012 Hydrogen Production from Waste Aluminum Chip
2011 - 2014 Utilization of Biomass Waste as Energy Source in Iron Making
2011 - 2014 Utilization of Biomass Waste as Energy Source in Iron Making
2011 - 2012 Design and Fabrication of Emergency Air Pump for Punched Tire Motor Cycle
2011 - 2012 Probability Safety Assessment for Nuclear Power PLant (KVC Project 2011)
2011 - 2012 Hydrogen Production from Waste Aluminum Chip
2011 - 2012 Design and Fabrication of Emergency Air Pump for Punched Tire Motor Cycle
2010 - 2011 Effect of the degree of chromium carbide precipitation on the corrosion on SS304
2010 - 2010 Royal Selangor International SDN BHD
2010 - 2010 Royal Selangor International SDN BHD
2010 - 2011 Effect of the degree of chromium carbide precipitation on the corrosion on SS304
2009 - 2010 Measurement of the Degree of Chromium carbide precipitation of SS304
2009 - 2010 Preparation of Silica from Rice Husk Gasification
2009 - 2010 Preparation of Silica from Rice Husk Gasification
2009 - 2010 Measurement of the Degree of Chromium carbide precipitation of SS304
Article
2020 Education for sustainable development as diffusion of innovation of secondary school students. Journal of Teacher Education for Sustainability , 22 (1) pp.84-97
2020 New approach of Municipal Solid Waste (MSW) leachate treatment using hydrothermal method. TEST Engineering & Management , 83 pp.1117-1121
2019 Characterization of municipal solid waste in Malaysia for energy recovery. IOP Conference Series: Earth and Environmental Science , 264 (1) pp.1-6
2018 Effect of charcoal derived from oil palm empty fruit bunch on the sinter characteristics of low grade iron ore. Journal of Cleaner Prodcution , 200 pp.954-959
2018 Innovative process to enrich carbon content of EFB-derived biochar as an alternative energy source in ironmaking. Advances in Materials Science and Engineering , 2018 pp.1-7
2017 Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters , 23 (7) pp.6237-6241
2017 Growth conditions of graphene grown in Chemical Vapour Deposition (CVD). Sains Malaysiana , 46 (7) pp.1033-1038
2016 Enhancement of oil palm empty fruit bunch char by impregnation of pyrolytic carbon from tar vapor decomposition. Journal of Renewable and Sustainable Energy , 8 (1) pp.013110-1-013110-11
2016 Utilization of low-grade iron ore in ammonia decomposition. Procedia Chemistry , 19 pp.119-124
2016 New technology for biochar production from oil palm empty fruit bunch. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.368-371
2015 Utilization of Malaysian low grade iron ore as medium for ammonia decomposition. ARPN Journal of Engineering and Applied Sciences , 10 (22) pp.17286-17288
2015 CO2 emissions for concrete bore piling construction. Jurnal Teknologi , 77 (30) pp.25-34
2015 Development of carbon-infiltrated bio-char from oil palm empty fruit bunch. ISIJ International , 55 (2) pp.436-440
2014 Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore. International Journal of Mineral, Metallurgy and Minerals , 21 (4) pp.326-330
2014 Enhancement of magnetic properties of Malaysian iron ore by reduction roasting using oil palm empty fruit bunch. ISIJ International , 54 (4) pp.994-996
2014 Reduction of low grade iron ore pellet using palm kernel shell. Renewable Energy , 63 pp.617-623
2013 Carbon doped iron ore using palm kernel shell. Advanced Materials Research , 701 pp.28-31
2013 Magnetization of low grade iron ore using empty fruit bunch ash. Advanced Materials Research , 701 pp.141-144
2013 Effect of Numbers of Fringing Electric Field (FEF) Fingers on the Performance of Sensor for Water Content in Soil. International Journal of Materials, Mechanics and Manufacturing , 1 (1) pp.46-49
2013 Reduction of iron ore/empty fruit bunch char briquette composite. ISIJ International , 53 (10) pp.1749-1755
2013 Carbon deposition using various solid fuels for ironmaking applications. Energy & Fuels , 27 (5) pp.2687-2692
2012 Reduction of briquette composite made of low grade from ore and biomass ash. SEAISI Quarterly Journal , 41 (4) pp.12-16
2012 Effect of Sn addition on mechanical properties of zinc-based alloy. Advanced Materials Research , 576 pp.378-381
2012 Effect of holding time on the corrosion potential of SS304. Advanced Materials Research , 576 pp.382-385
2012 Effect of adding Ag on tensile and microstructure properties of zinc alloy. International Journal of Engineering and Technology , 12 (3) pp.78-84
2012 Carbon deposition from biotar by fast pyrolysis using the chemical vInfiltration process within porous low-grade iron ore for iron-making. Energy & Fuels , 26 (12) pp.7340-7346
2011 Phase formation during reduction of iron sand with soda ash flux addition. Advanced Materials Research , 264-5 pp.801-806
2010 Pre-reduced iron produced from low grade ore using biomass. SEAISI Quarterly Journal , 39 (2) pp.18-22
2010 Process analysis of the effective utilization of molten slag heat by direct blast furnace cement production system. ISIJ International , 50 (9) pp.1319-1325
2010 Exergy analysis of methane steam reformer utilizing steelmaking waste heat. ISIJ International , 50 (9) pp.1311-1318
2009 The effect of magnetization on the leached limonitic ore. Indonesian Mining Journal , 12 (2) pp.90-95
2009 Biotar ironmaking using wooden biomass and nanoporous iron ore. Energy & Fuels , 23 (2) pp.1128-1131

Conference or Workshop Item

2020 Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020
2019 Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018)
2019 Mechanism of carbon deposition within char derived from oil palm empty fruit bunch. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018
2018 Characteristics of iron ore sinter with EFB addition. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018
2018 Effect of EFB content on reducibility of low grade iron ore composite at 1000°C - 1200°C. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Effect of temperature on porosity of iron ore sinter with biochar derived from EFB. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
2018 Effect of EFB content on reducibility of low grade iron ore composite at 1000oC – 1200oC. In: International Conference on Advances in Manufacturing and Materials Engineering 2017
2018 Phase change of iron ore reduction process using EFB as reducing agent at 900-1200°C. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018
2018 Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI)
2016 Effect of pre-treatment on the quality of carbon-infiltrated bio-char. In: 4th International Conference Biotechnology Engineering 2016
2016 Carbon deposition from biotar by fast pyrolysis of palm empty fruit bunch. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP)
2015 Synthetic of pure alumina from aluminum scrap . In: International Conference in Advances in Manufacturing And Materials Engineering
2015 Development process for tar filtering from biomass pyrolysis. In: 5th International Conference on Energy and Sustainability 2014
2015 Effect of electron beam irradiation on the morphology of alumina ceramic. In: International Conference in Advances in Manufacturing And Materials Engineering
2014 Utilization of palm oil biomass for treatment of low grade Malaysian iron ore. In: Innovation of Ironmaking Technologies and Future International Collaboration : To Overcome Energy & Resource Restrictions in Accordance with Environments
2014 Enhancement magnetic properties of Malaysian iron ore by biomass treatment. In: Workshop on Energy Conversion Materials 2014
2011 Zero emission processing of waste aluminium foil. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
2011 Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science
2011 Production of fine alumina from waste aluminum can. In: International Renewable Energy & Environment Conference (IREEC 2011)
2011 Treatment of iron ore using biomass waste for ironmaking. In: International Renewable Energy & Environment Conference (IREEC 2011)
2011 Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011)
2011 Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011)
2011 Acoustical and thermal properties of lightweight coir fiber reinforced cements composites. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011

Book

2021 Advanced processing of Lateritic ore. BOOK PUBLISHER INTERNATIONAL . ISBN 978-93-91473-07-5
2011 Introduction to probability safety assessment of nuclear power plant. IIUM Press . ISBN 9789674180546

Book Section

2021 Phase change of low grade iron ore during sintering and reduction with oil palm empty fruit bunch. In: Advanced Aspects of Engineering Research BOOK PUBLISHER INTERNATIONAL . ISBN 978-93-90768-14-1 , pp.23-33
2011 Preparation of rice husk for raw material of silicon. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.203-206
2011 Upgrading of iron sand by magnetic concentration and reduction. In: Contemporary metallic materials IIUM Press . ISBN 9789674181642 , pp.7-15
2011 Upgrading of laterite ore by reduction and learning. In: Contemporary metallic materials IIUM Press . ISBN 9789674181642 , pp.1-6
2011 Kinetic study of reduction roasting of mixed laterite ore and coal. In: Contemporary metallic materials IIUM Press . ISBN 9789674181642 , pp.70-74
2011 Effect of stabilizer addition on crystal formation of zirconia synthesized from zircon sand. In: Contemporary metallic materials IIUM Press . ISBN 978-967-418-164-2 , pp.20-26
2011 Upgrading of iron-rich laterite ore using reverse flotation. In: Contemporary metallic materials IIUM Press . ISBN 9789674181642 , pp.27-33
2011 Malaysian coir fibre for acoustical absorption cement composite panel . In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.39-48
2011 Development of thermoselect process in waste management system in Malaysia. In: Manufacturing management from basic machining to quality product IIUM Press . ISBN 9789674181659 , pp.119-124