Article |
| 2022 |
Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 90
(2)
pp.135-159
|
| 2021 |
Review on advances in porous Al composites and
the possible way forward. Journal of Materials Research and Technology
, 14
pp.2017-2038
|
| 2021 |
Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 78
(2)
pp.56-66
|
| 2021 |
Properties of aluminium/electroless ni-coated sic composites - a review. FUDMA Journal of Sciences
, 5
(1)
pp.381-394
|
| 2021 |
An overview on the importance of surface modification by TIG and lasers incorporating carbides and their relations to wear behaviours. Jurnal Tribologi
, 29
pp.96-116
|
| 2021 |
Hard-hydrophobic nano-CuO Coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering
|
| 2021 |
Optical and structural characterization of (Mn, Fe) co-doped lead chalcogenides for optoelectronics applications. Journal of Optoelectronics and Advanced Materials
, 23
(11-12)
pp.564-573
|
| 2021 |
Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering
pp.1-10
|
| 2021 |
An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings
, 41
pp.30-37
|
| 2021 |
Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering
, 1057
pp.1-12
|
| 2021 |
Reuse of marble wastes as reinforcement phase in LM6 aluminium matrix composites for automotive applications. International Journal of Powertrains
, 10
(2)
pp.188-203
|
| 2021 |
Spin-orbit coupling effect on the electronic structure of Sr2FeHfO6 alloy for spintronics device application. Journal of Magnetism and Magnetic Materials
, 518
pp.1-7
|
| 2021 |
Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering
, 46
pp.6557-6566
|
| 2021 |
Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering
pp.1-10
|
| 2021 |
Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science
, 56
pp.16195-16222
|
| 2020 |
Sliding wear of SiC reinforced duplex stainless steel via TIG torch sur-face melting technique. Recent Patents on Engineering
, 14
(3)
pp.366-372
|
| 2020 |
Effect of Nano-CuO grain size on heat transfer performance of copper substrate. Test Engineering and Management
, 83 (May-June)
pp.1180-1185
|
| 2020 |
Anodized nano-coating of copper material for thermal efficiency enhancement. Test Engineering and Management
, 83 (May-June)
pp.1430-1437
|
| 2020 |
Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 steel. TEST Engineering & Management
, 83 (May-June)
pp.1392-1397
|
| 2020 |
Manufacturing and friction welding of aluminium matrix composites – review of current status and future directions. TEST Engineering & Management
, 83 (May-June)
pp.1122-1130
|
| 2020 |
Effective parameter of nano-CuO coating on CO gas-sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering (AJSE)
, xx
(xx)
pp.1-5
|
| 2020 |
Experimental investigation on the stability of 40% ethylene
glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 69
(1)
pp.110-121
|
| 2020 |
Thermal conductivity and viscosity of TiO2/MWCNTs (doped
10wt% graphene) - ethylene glycol based nanofluids for
different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 72
(1)
pp.32-46
|
| 2020 |
Hardness behaviour of carbon nanotube-aluminium nano-composite using nanoindentation technique. Materials Today: Proceedings
, xx
(xx)
pp.1-5
|
| 2020 |
Sliding wear of SiC reinforced duplex stainless steel via TIG torch surface melting technique. Recent Patents on Engineering
, 14
(3)
pp.366-372
|
| 2020 |
Friction coefficient of carbon nanotube reinforced aluminium nano-composite. Nigerian Journal of Engineering
, 27
(1)
pp.25-35
|
| 2020 |
Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research
, 8
(2)
pp.355-361
|
| 2019 |
Optimisation of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation
, 10
(3)
pp.165-185
|
| 2019 |
Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation
, 10
(3)
pp.165-185
|
| 2019 |
TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF
, 97
(1)
pp.12-21
|
| 2019 |
Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science
, 15
pp.49-61
|
| 2018 |
Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture
, 3
(1)
pp.73-77
|
| 2018 |
Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi
, 18
pp.136-148
|
| 2018 |
Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi
, 17
pp.15-28
|
| 2018 |
Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation
|
| 2018 |
Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture
, 3
(1)
pp.55-62
|
| 2018 |
Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology
, 7
(3)
pp.32-39
|
| 2018 |
The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International
, 44
(2)
pp.1802-1811
|
| 2017 |
Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering
, 184
pp.012031-1
|
| 2017 |
Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES)
, 11
(4)
pp.3015-3026
|
| 2017 |
Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials
, 2
(2)
pp.90-94
|
| 2017 |
Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering
, 14
(1)
pp.3913-3926
|
| 2017 |
Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis
, 14
(2 (Thematic Issue))
pp.227-232
|
| 2017 |
Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology
|
| 2017 |
Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais
, 29
(3 (September -December))
pp.129-144
|
| 2017 |
A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures
, 13
(4)
pp.678-698
|
| 2016 |
Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces
, 23
(6)
pp.533-547
|
| 2016 |
Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels
, 30
(1)
pp.334-343
|
| 2016 |
Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture
, 1
(1)
pp.21-26
|
| 2016 |
Mechanical properties of oil palm shell composites. International Journal of Polymer Science
, 2016
pp.1-7
|
| 2016 |
Microstructural aspects of wear behaviour of TiC coated low alloy steel. Materials Science and Technology
, 32
(4)
pp.303-307
|
| 2016 |
Preparation and characterisation of TIG-alloyed
hybrid composite coatings for high-temperature
tribological applications. Transactions of the IMF : The International Journal of Surface Engineering and Coatings
, 94
(4 (Special Issue: MITC special issue - Coatings for Tribology))
pp.211-221
|
| 2016 |
Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites. e-Polymers
, 16
(4)
pp.323-329
|
| 2016 |
Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES)
, 10
(1)
pp.1758-1764
|
| 2015 |
Fabrication and characterization of graphene from solid carbon dioxide. Advanced Materials Research
, 1115
pp.418-421
|
| 2015 |
TIG melted surface modified titanium alloy for cylinder liner application. International Journal of Automotive Engineering and Technologies
, 4
(3)
pp.130-138
|
| 2015 |
Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force
. Journal of Mechanical Science and Technology
, 29
(5)
pp.1941-1953
|
| 2015 |
Thin surface layers of iron-based alloys deposited by TIG hardfacing
. Tribology Online
, 10
(6)
pp.434-440
|
| 2015 |
Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research
, 1115
pp.16-19
|
| 2015 |
Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research
, 1115
pp.174-177
|
| 2015 |
Effect of temperature on the wear properties of alloy steel under jatropha curcas biodiesel
. Advanced Materials Research
, 1115
pp.203-206
|
| 2015 |
Synthesis and characterization of Ni–P coated
hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry
, 51
(6)
pp.523-529
|
| 2015 |
Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research
, 1115
pp.207-2012
|
| 2015 |
Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach
. Advanced Materials Research
, 1115
pp.238-242
|
| 2015 |
Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research
, 1115
pp.243-246
|
| 2015 |
Crush zone morphology of epoxy–glass fiber–aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research
, 1115
pp.258-261
|
| 2015 |
Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research
, 1115
pp.266-269
|
| 2015 |
Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research
, 1115
pp.288-291
|
| 2015 |
Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology
, 9
(19)
pp.176-181
|
| 2015 |
Surface features of TIG melting coated CP-titanium. Advanced Materials Research
, 1115
pp.234-237
|
| 2015 |
Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research
, 1115
pp.398-401
|
| 2015 |
Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research
, 1115
pp.166-169
|
| 2015 |
Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology
, 31
(11)
pp.1362-1369
|
| 2015 |
Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM)
, 13
(2)
pp.11-13
|
| 2014 |
Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research
, 1024
pp.207-210
|
| 2014 |
Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences
, 11
(1)
pp.1836-1840
|
| 2014 |
Degradation characteristics of SPF/SPS biocomposites . Fibres & Textiles in Eastern Europe
, 22
(5(107))
pp.94-96
|
| 2014 |
Performance assessment of aluminium composite material for automotive brake rotor . International Journal of Vehicle Systems Modelling and Testing
, 9
(3/4)
pp.207-217
|
| 2014 |
Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite
. Materials Science Forum
, 773-77
pp.541-546
|
| 2014 |
Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME)
, 10
(1)
pp.1841-1851
|
| 2014 |
Effect of Micro-EDM Parameters on Material Removal Rate of
Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials
, 465
pp.1329-1333
|
| 2014 |
Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering
, 56
pp.68-73
|
| 2014 |
Tribocorrosion behaviour of biodiesel. Tribology Online
, 9
(1)
pp.10-20
|
| 2014 |
Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry
, 26
(4)
pp.955-959
|
| 2013 |
Thermo-mechanical behaviours of thermoplastic starch derived from sugar palm tree (Arenga Pinnata). Carbohydrate Polymers
, 92
(2)
pp.1711-1716
|
| 2013 |
Materials and processing route for aircraft brake system. International Journal of Mechanical and Materials Engineering (IJMME)
, 8
(1)
pp.14-20
|
| 2013 |
Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences
, 5
(2)
pp.91-93
|
| 2013 |
Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials
, 378
pp.259-264
|
| 2013 |
Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering
, 53
(2013)
pp.1-5
|
| 2013 |
Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design
, 49
pp.285-289
|
| 2013 |
Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials . The Arabian journal for science and engineering
, 38
(11)
pp.3191-3199
|
| 2013 |
Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research
, 626
pp.537-541
|
| 2013 |
Synergistic effect on flexural properties of kenaf-glass hybrid composite. Advanced Materials Research
, 626
pp.989-992
|
| 2013 |
The tribological behaviour of Fe-C-Al cast iron – effect of temperature. Industrial Lubrication and Tribology
, 65
(5)
pp.320-327
|
| 2013 |
Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research
, 701
pp.225-228
|
| 2013 |
Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering
, 68
pp.736-742
|
| 2013 |
Investigation of material removal characteristics in EDM of
nonconductive ZrO2 ceramic . Procedia Engineering
, 56
pp.696-701
|
| 2012 |
Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding ARC. International Journal of Mechanical and Materials Engineering (IJMME)
, 7
(1)
pp.48-53
|
| 2012 |
Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research
, 576
pp.76-79
|
| 2012 |
Aluminum-silicon carbide composites for enhanced physio-
mechanical properties. Advanced Materials Research
, 576
pp.370-373
|
| 2012 |
Aluminium-copper-SiCp composite materials corrosion in biodiesel
. Advanced Materials Research
, 576
pp.425-428
|
| 2012 |
The crystallinity and hardness properties of Al-Cu/SiCp new composite materials. Advanced Materials Research
, 576
pp.450-453
|
| 2012 |
Flexural and impact properties of kenaf-glass hybrid composite. Advanced Materials Research
, 576
pp.471-474
|
| 2012 |
Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems
, 4
(2)
pp.69-73
|
| 2012 |
Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. International Journal of Mechanical and Materials Engineering (IJMME)
, 7
(1)
pp.48-53
|
| 2012 |
Sugar palm tree: a versatile plant and novel source for biofibres, biomatrices, and biocomposites. Polymers from Renewable Resources
, 3
(2)
pp.61-77
|
| 2012 |
Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy
, 6
(6)
pp.1-5
|
| 2012 |
A new approach to use Arenga pinnata as sustainable
biopolymer: effects of plasticizers on physical properties. Procedia Chemistry
, 4
pp.254-259
|
| 2012 |
Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences
, 6
pp.288-291
|
| 2012 |
Heat transfer analysis inside exhaust port for a hydrogen fueled port injection engine. Advanced Science Letters
, 14
(1)
pp.239-243(5)
|
| 2012 |
Digital logic and knowledge-based system for the automotive piston material selection. International Journal Materials and Structural Integrity
, 6
(2/3/4)
pp.134-150
|
| 2012 |
New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering (IJMME)
, 7
(2)
pp.166-170
|
| 2012 |
Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences
, 6
(12)
pp.69-75
|
| 2011 |
Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology
, 74
pp.198-202
|
| 2011 |
Modelling aspect of corrosive wear under biodiesel. Engineering e-Transaction
, 6
(2)
pp.161-168
|
| 2011 |
Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research
, 264
pp.1648-1653
|
| 2011 |
Aluminium metal matrix composite: improving wear performance through treatment. Advanced Materials Research
, 264-65
pp.278-283
|
| 2011 |
Reverse engineering of motorcycle chain. Advanced Materials Research
, 264-26
pp.1678-1683
|
| 2011 |
Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES)
, 1
pp.16-24
|
| 2011 |
Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering
, 5
(2)
pp.503-507
|
| 2011 |
Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials
, 465-66
pp.1329-1333
|
| 2011 |
Modeling, analysis and fatigue life prediction of lower suspension arm. Advanced Materials Research
, 264
pp.1557-1562
|
| 2011 |
Current research trends on dry, near-dry and powder mixed
electrical discharge machining. Advanced Materials Research
, 264
pp.956-961
|
| 2011 |
Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research
, 264-
pp.949-955
|
| 2011 |
Prediction of recycle method using relevance vector machine. Advanced Materials Research
, 264
pp.943-948
|
| 2011 |
Material properties and design aspects of folding bicycle frame. Advanced Materials Research
, 264-
pp.777-782
|
| 2011 |
Surface temperature distribution in a composite brake rotor. International Journal of Mechanical and Materials Engineering (IJMME)
, 6
(3)
pp.356-361
|
| 2011 |
Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model
. Journal of Mechanical Engineering and Sciences (JMES)
, 1
pp.16-24
|
| 2011 |
Metal matrix composite brake rotor: Historical development and product life cycle analysis. International Journal of Automotive and Mechanical Engineering (IJAME)
, 4
pp.471-480
|
| 2010 |
Heat transfer characteristics of intake port spark ignition engine: a comparative study . Journal of Applied Sciences
, 10
(18)
pp.2019-2026
|
| 2010 |
In-cylinder heat transfer characteristics of hydrogen fueled engine: a steady state approach. American Journal of Environmental Sciences
, 6
(2)
pp.124-129
|
| 2010 |
Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences
, 7
(10)
pp.1364-1371
|
| 2010 |
Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron. International Journal of Mechanical and Materials Engineering (IJMME)
, 5
(2)
pp.208-213
|
| 2010 |
Transient in-cylinder gas flow characteristics of single
cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences
, 7
(10)
pp.1364-1371
|
| 2010 |
Materials selection of a bicycle frame using cost per unit property and digital logic methods. International Journal of Mechanical and Materials Engineering
, 5
(1)
pp.95-100
|
| 2010 |
Development of a new route for Fe-C-Al cast iron production. Journal of Applied Sciences
, 10
(12)
pp.1196-1199
|
| 2009 |
Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences
, 6
(4)
pp.715-725
|
| 2009 |
Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences
, 6
(4)
pp.715-725
|
| 2009 |
Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology
, 61
(2)
pp.78-83
|
| 2008 |
Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach. Journal of Applied Sciences
, 8
(19)
pp.3316-3327
|
| 2008 |
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology
, 60
(4)
pp.189-194
|
| 2008 |
Moisture absorption behaviour of sugar palm fiber reinforced epoxy composites. Materials and Design
, 29
pp.1666-1670
|
| 2008 |
The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering
, 47
(6)
pp.606-612
|
| 2007 |
Experimental investigation on system
performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology
, 59
(5)
pp.200-208
|
| 2007 |
Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. The Arabian journal for science and engineering
, 32
(2B)
pp.359-364
|
| 2005 |
Total design of polymer composite automotive bumper fascia. Suranaree Journal of Science and Technology
, 12
(12)
pp.39-45
|
| 2005 |
Study on impact properties of arenga pinnata fibre reinforced epoxy composites. Jurnal Teknologi Terpakai
, 3
(1)
pp.14-19
|
| 2005 |
Design and fabrication of natural woven fabric reinforced
epoxy composite for household telephone stand. Materials and Design
, 26
(1)
pp.65-71
|
| 2005 |
A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology
, 159
pp.145-151
|
| 2004 |
The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel. Journal of Materials Processing Technology
, 153-15
(10)
pp.482-487
|
| 2003 |
Vegetable-based biodegradable lubricating oil additives . Industrial Lubrication and Tribology
, 55
(3)
pp.137-143
|
| 2003 |
Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering
, 28
(2B)
pp.171-181
|
| 2002 |
Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology
, 54
(4)
pp.177-182
|
| 2001 |
The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia. Energy
, 26
(7)
pp.723-737
|
| 2001 |
Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology
, 53
(4)
pp.148-154
|
| 2001 |
Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Journal of Automobile Engineering
, 215
(3)
pp.393-404
|
| 2000 |
Effect of mechanical factors on tribological properties of palm oil methyl blended lubricant. Wear
, 239
pp.117-125
|
| 1999 |
Palm oil and mineral oil based lubricants - their tribological and emission performance. Tribology International
, 32
(6)
pp.305-314
|
| 1998 |
Effect of process variables on structure and properties of
aluminium–silicon piston alloy. Journal of Materials Processing Technology
, 77
(1-3)
pp.122-128
|
| 1998 |
Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel. Tribology Transaction
, 41
(1)
pp.155-159
|
| 1997 |
Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test
. Wear
, 206
(1-2)
pp.179-186
|
| 1996 |
The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel. Wear
, 198
(1-2)
pp.293-299
|
| 1996 |
Wear, performance and emissions of a two-stroke
engine running on palm oil methyl ester blended
lubricant. Journal of Engineering Tribology
, 210
(4)
pp.213-219
|
Conference or Workshop Item |
| 2021 |
Natural and industrial origin reinforced LM6 aluminum composite materials – A comparative study.
In: Recent Innovations in Science & Technology (RIST 2021)
|
| 2021 |
Natural and industrial origin reinforced LM6 aluminum matrix composite materials – a comparative study.
In: International Conference on Recent Innovations in Science and Technology (RIST 2021)
|
| 2021 |
Sustainable energy simulation for water heating system.
In: 2021 Sustainable Engineering and Industrial Technology Conference
|
| 2021 |
Comparative study on performance of flat plate and evacuated tube collectors solar water heater system.
In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,
|
| 2021 |
The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique.
In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21)
|
| 2021 |
Sustainable eSiC reinforced composite materials – synthetization and characterization.
In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021)
|
| 2021 |
High impact journal writing and publication.
In: Workshop on High Impact Journal Writing and Publication
|
| 2020 |
A systematic literature review.
In: Webinar on Sytematic Literature Review
|
| 2020 |
Evaluation of sustainable micro-alloyed HSLA steel for pipeline application.
In: International Gas Research Conference 2020 (IGRC 2020)
|
| 2020 |
Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018.
In: "Energy Security and Chemical Engineering Congress 2019, ESChE 2019"
|
| 2020 |
Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol.
In: 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019)
|
| 2019 |
Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 Steel.
In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2019
|
| 2019 |
A new approach for composite coating development on duplex stainless steel (DSS).
In: Kulliyyah Of Engineering Research, Innovation And Commercialisation Exhibition (KERICE) 2019
|
| 2019 |
Sustainable lightweight composite materials.
In: Tech Plan Demo Day in Malaysia 2019
|
| 2018 |
A new approach for composite coating development on metallic materials.
In: Malaysia Technology Expo 2018
|
| 2018 |
Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application.
In: Malaysia Technology Expo 2018
|
| 2018 |
TIG torch technique for hard face surfacing.
In: TNBR Remaco presentation
|
| 2018 |
Melting of SiC powders preplaced duplex stainless steel using TIG welding.
In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017
|
| 2018 |
Lighter weight and energy efficient eco-siC composite for motorbike brake disc application.
In: 29th INTERNATIONAL INVENTION, INNOVATION AND TECHNOLOGY EXHIBITION (ITEX) 2018
|
| 2018 |
Nitride alloy layer formation of duplex stainless steel using nitriding process.
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
|
| 2018 |
An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel.
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
|
| 2018 |
Micro electro discharge machining of non-conductive ceramic.
In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017)
|
| 2018 |
Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel.
In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018)
|
| 2017 |
Writing a high impact research paper.
In: Seminar/Talk at Faculty of Science & Technology, University of Mostaganem Algeria
|
| 2017 |
Materials processing technology with Islamic perspective.
In: KOE Islamization Seminar
|
| 2017 |
Modified surface of duplex stainless steel using tig torch and diffusion techniques.
In: Malaysia Technology Expo (MTE 2017)
|
| 2017 |
Overview of Malaysian standards on alloy steels.
In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels,
|
| 2017 |
Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques.
In: Malaysia Technology Expo (MTE 2017)
|
| 2017 |
Noble hybrid composite coated low alloy steel for high temperature applications.
In: Malaysia Technology Expo (MTE 2017)
|
| 2017 |
Particulate composite surface by TIG torch surfacing.
In: Advanced Materials Characterization Technique (AMCT 2017)
|
| 2017 |
Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel.
In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017
|
| 2017 |
Particulate preplaced TIG melted surface layer of duplex stainless steel.
In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017
|
| 2017 |
Eco-friendly automotive disc brake and cylinder liner (Eco SiC).
In: IIUM World Prosumer Convention 2017
|
| 2017 |
Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding.
In: Advances in Material & Processing Technologies Conference
|
| 2017 |
Physical properties of heat-treated rattan waste binderless particleboard.
In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016
|
| 2017 |
Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel.
In: 5th Malaysia-Japan Tribology Symposium (MJTS2017)
|
| 2017 |
TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization.
In: 1st International Workshop on Multifunctional Materials (IW2M-2017)
|
| 2017 |
Fe-C-Si ternary composite coating on CP-titanium and its tribological properties.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles.
In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017)
|
| 2017 |
Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Hardfacing of duplex stainless steel using melting and diffusion processes.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2017 |
Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2016 |
Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding.
In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016)
|
| 2016 |
Characterization of ball-milled carbon nanotube dispersed
aluminum mixed powders.
In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3)
|
| 2016 |
Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016)
|
| 2016 |
Surface modification of HSLA steel and its fracture behavior.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016)
|
| 2016 |
Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16)
|
| 2016 |
Fracture surface behaviour of Al-Mg-SiCp composite materials.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2016 |
Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2016 |
Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach.
In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016)
|
| 2016 |
Lubricated wear behaviour of SiC reinforcement on TI-6AL-4V alloy based on Taguchi approach.
In: 4th Malaysia-Japan Tribology Symposium 2016
|
| 2016 |
Fungi growth on rattan board exposed to natural weathering.
In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
|
| 2016 |
Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite.
In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016)
|
| 2016 |
Investigation of parametric influence on the properties of Al6061-SiCp composite.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
| 2015 |
Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application.
In: PECIPTA2015
|
| 2015 |
Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique.
In: 3rd International Doctoral Student Symposium with Partner Universities
|
| 2015 |
Hardsurface layer of TiC embedded alloy steel by TIG torch technique.
In: The 2015 ICBTS International Academic Research Conference in Europe & America
|
| 2015 |
Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites.
In: Malaysian International Tribology Conference 2015
|
| 2015 |
Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications.
In: Malaysian International Tribology Conference 2015
|
| 2015 |
Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting.
In: International Conference on Functional Materials and Metallurgy, ICoFM 2014
|
| 2015 |
Composite brake rotor: energy savings and wear performance.
In: IRIIE 2015
|
| 2014 |
Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application.
In: Malaysia Technology Expo 2014
|
| 2014 |
TIG melted surface modified titanium alloy for automotive cylinder liner application.
In: International Conference on Advanced Technology & Sciences (ICAT’14)
|
| 2014 |
Performance of hybrid aluminium–composite columnar tube under axial crush force .
In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014)
|
| 2014 |
Contemporary light weight composite material -milestone towards automotive brake rotor application.
In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014)
|
| 2014 |
Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique
.
In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014)
|
| 2014 |
Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel.
In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14)
|
| 2013 |
Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method.
In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013
|
| 2013 |
Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor.
In: 24th International Invention, Innovation and Technology Exhibition (ITEX 2013)
|
| 2013 |
High performance aluminium composite brake rotor.
In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013)
|
| 2013 |
Physical property of multi walled carbon nanotube reinforced aluminium nano composite
.
In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013
|
| 2013 |
Energy saving composite automotive brake rotor prototype
.
In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013
|
| 2013 |
Development of kenaf hybrid composite for structural applications.
In: IRIIE 2013
|
| 2012 |
Failure of woven fiber glass epoxy composite under charpy impact loading.
In: The 21st Scientific Conference of the Microscopy Society of Malaysia
|
| 2012 |
Physical property of multi walled carbon nanotube reinforced aluminium nano composite
.
In: World Research & Innovation Convention on Engineering & Technology (WRICET2012)
|
| 2012 |
Development of waste coir-reinforced aluminum matrix automotive brake pad material
.
In: IRIIE2012
|
| 2012 |
Reverse engineering of automotive piston.
In: IRIIE2012
|
| 2012 |
A novel approach for the prediction of thermal distribution in automotive brake rotor.
In: 5th Engineering Conference (ENCON12)
|
| 2012 |
Biodiesel production from Macro Algae as a green fuel for diesel engine.
In: 5th Engineering Conference (ENCON12)
|
| 2011 |
Energy efficient lighter weight aluminium matrix composite automotive brake motor.
In: International Conference On Harnessing Technology (ICHT) 2011,
|
| 2011 |
Surface temperature distribution in a composite brake rotor.
In: Regional Tribology Conference 2011
|
| 2011 |
Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study.
In: Regional Tribology Conference 2011
|
| 2011 |
Tribological study of A1 based natural fibre reinforced composite brake pad materials.
In: Regional Tribology Conference 2011
|
| 2011 |
Medelling aspect of corrosive wear under biodiesel.
In: Regional Tribology Conference
|
| 2011 |
New natural fibre reinforced composite brake friction material.
In: Regional Tribology Conference 2011
|
| 2011 |
Investigation of tribological issues in microforming: a review.
In: Regional Tribology Conference
|
| 2011 |
Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc.
In: Regional Tribology Conference 2011
|
| 2010 |
Mold preparation for stir casting of aluminium matrix composite brake motor: a review.
In: World Engineering Congress 2010
|
| 2010 |
Materials for bicycle frame system - a case study on the development of selection method.
In: The third international conference on structure, processing and properties of materials
|
| 2010 |
The development of an optimum material selection process for the design of automative brake rotor.
In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010)
|
| 2010 |
Reverse engineering of children bicycle.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
| 2010 |
Development of material selection method for the application children bicycle frame.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
| 2010 |
Material selection method in design of automotive brake disc .
In: World Congress on Engineering 2010
|
| 2010 |
Design and development of mild steel die for production of hip-bone joint.
In: International Chemical and Environmental Engineering Conference 2010
|
| 2010 |
Fabrication of biodegradable composite – an implication of plasticizer.
In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010)
|
| 2010 |
An overview of advanced material characterization techniques.
In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010)
|
| 2010 |
Knowledge based expert system application for automative piston material selection.
In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010)
|
| 2010 |
Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish.
|
| 2010 |
Effect of multiple-particle size reinforced silicon carbide(SICP) on properties of aluminium matrix composite.
In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010)
|
| 2010 |
Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel.
|
Book Section |
| 2020 |
Processing of ceramic composite coating via TIG torch welding technique.
In: Encyclopedia of Renewable and Sustainable Materials
Elsevier Inc.
. ISBN 978-0-12-813196-1
, pp.523-535
|
| 2020 |
Interface study of SiCp/6061Al composite.
In: Encyclopedia of Renewable and Sustainable Materials
Elsevier Inc.
. ISBN 978-0-12-813196-1
, pp.456-461
|
| 2020 |
TIG Torch melting as surface engineering technology.
In: Encyclopedia of Renewable and Sustainable Materials
Elsevier
. ISBN 978-0-12-813196-1
, pp.629-637
|
| 2020 |
Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements.
In: Encyclopedia of renewable and sustainable materials
Elsevier
. ISBN 978-0-12-813196-1
, pp.439-444
|
| 2020 |
Residual stress analysis for sustainable structural integrity assessment of an engineering component.
In: Encyclopedia of Renewable and Sustainable Materials
Elsevier Inc.
. ISBN 978-0-12-813196-1
, pp.548-556
|
| 2020 |
Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements.
In: Encyclopedia of renewable and sustainable materials
Elsevier
. ISBN 780128131954
, pp.439-444
|
| 2020 |
Particulate composite protective coating using conventional melting approach.
In: Encyclopedia of renewable and sustainable materials
Elsevier
. ISBN 9780128035818
, pp.510-516
|
| 2019 |
Removal of chromium with CNT coated activated carbon for waste water treatment.
In: Encyclopedia of Renewable and Sustainable Materials
Elsevier 2020
. ISBN 9780128131954
, pp.1-11
|
| 2019 |
Performance of thermoplastic sugar palm starch biopolymers.
In: Sugar Palm Biofibers, Biopolymers and Biocomposites
CRC Press
. ISBN 978-1-4987-5302-9
, pp.57-70
|
| 2019 |
Review of development and characterization of sugar palm fiber–reinforced polymer composites.
In: Sugar Palm Biofibers, Biopolymers and Biocomposites
CRC Press
. ISBN 978-1-4987-5302-9
, pp.15-40
|
| 2019 |
Sugar palm starch biopolymer: extraction and processing.
In: Sugar Palm Biofibers, Biopolymers and Biocomposites
CRC Press
. ISBN 978-1-4987-5302-9
, pp.41-55
|
| 2018 |
Residual stress analysis in sustainable structural integrity assessment of an engineering component.
In: Encyclopedia of Renewable and Sustainable Materials
Elsevier
, pp.1-9
|
| 2018 |
Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements.
In: Encyclopedia of renewable and sustainable materials
Elsevier
, pp.1-7
|
| 2018 |
Wear behavior of aluminium modified cast iron in comparison
with conventional gray cast iron.
In: Reference module in materials science and materials engineering
Elsevier
. ISBN 978-0-12-803581-8
, pp.1-7
|
| 2014 |
Automotive bottom structure composite materials selection: digital logic and knowledge based system approach.
In: Engineering composites: properties and applications
Universiti Putra Malaysia Press
. ISBN 9789673443963
, pp.191-210
|
| 2011 |
High Density Polyethylene (HDPE) as an alternative material in fuel tank production.
In: Advances in materials engineering (vol. 1)
IIUM Press
. ISBN 9789674181673
, pp.126-131
|
| 2011 |
Thermal profile analysis of composite brake rotor.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.165-171
|
| 2011 |
Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach.
In: Computers and simulation in modern science
WSEAS Press
. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882
, pp.107-113
|
| 2011 |
Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach.
In: Computers and simulation in modern science
WSEAS Press
. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882
, pp.107-113
|
| 2011 |
A critical review of metal matrix composite brake rotor .
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.1-6
|
| 2011 |
Technology of moulding for composite auto brake rotor.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.7-12
|
| 2011 |
Machining of ceramic materials: a review
.
In: Advanced Machining Process
IIUM Press
. ISBN 9789674181628
, pp.38-43
|
| 2011 |
The tribological behaviour of Al-Si automotive piston material.
In: Contemporary metallic materials
IIUM Press
. ISBN 9789674181642
, pp.75-80
|
| 2011 |
Conceptual design of folding bicycle frame with light weight materials.
In: Contemporary metallic materials
IIUM Press
. ISBN 9789674181642
, pp.81-85
|
| 2011 |
Reverse engineering of automotive piston.
In: Contemporary metallic materials
IIUM Press
. ISBN 9789674181642
, pp.86-91
|
| 2011 |
Reverse engineering for automotive fuel tank.
In: Contemporary metallic materials
IIUM Press
. ISBN 9789674181642
, pp.121-126
|
| 2011 |
Fabrication of metal matrix composite automotive brake rotor: part 1.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.80-85
|
| 2011 |
Fabrication of metal matrix composite automotive brake rotor: part 2 .
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.86-89
|
| 2011 |
Wear of aluminium matrix composite – effects of reinforcement combination.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.90-95
|
| 2011 |
High Density Polyethylene (HDPE) as an alternative material in fuel tank production .
In: Manufacturing management from basic machining to quality product
IIUM Press
. ISBN 9789674181659
, pp.164-171
|
| 2010 |
Investigation of Microholes Produced by Focused Ion Beam Micromachining.
In: Materials Processing and Precision Engineering
Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM
, pp.92-97
|
