Staff Directory


Meftah Hrairi

Academic Qualification

  • Ph.D in Mechanical Engineering - Doctor of Philosophy, Laval University, Canada
  • Master in Mechanical Engineering - Masters Degree, University of Sherbrooke
  • Bachelor in Mechanical Engineering - Bachelor Degree, University of Sherbrooke

Meftah Hrairi (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


meftah@iium.edu.my
4581


Expert Profile


Meftah Hrairi received his BSc and MSc in Mechanical Engineering from the University of Sherbrooke, Canada in 1990 and 1993, respectively, and his PhD in Mechanical Engineering from Laval University, Canada in 1999. He is currently a Professor at the Department of Mechanical and Aerospace Engineering, International Islamic University Malaysia (IIUM) where he has more than seventeen years of teaching and research experience. Prior to joining IIUM, Prof. Hrairi was a Senior Solutions Consultant at Gillani Inc., a Senior Application Engineer at i2 Technologies inc., both located in Dallas, Texas, USA, and a research engineer at Precitech inc. located in Quebec City, Canada. Prof. Hrairi has expertise inĀ Structural Health Monitoring, Structural Repair, Finite Element Analysis, Oil & Gas, Thermal Systems, and advanced materials and metal forming techniques to effectively form lightweight alloys for potential applications in the transportation industry. His work, which has spanned various industries including aerospace, automotive, materials, manufacturing and petrochemical, has been already published through several peer-reviewed journal papers, conference papers, posters & presentations. Prof. Hrairi is a regular instructor at IIUM in the areas of NDT, FEA, structural mechanics, materials and manufacturing processes in automotive and aerospace applications.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Interdisplinary Engineering ~ Non-Destructive Testing (NDT) - Structural Health Monitoring
  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Stress Analysis - Structural Repair, Finite Element Analysis
  • Engineering Tech ~ Applied Sciences And Technologies ~ Resource-Based Technology ~ Petroleum and Gas


Professional Membership


  • 1994 - 1999: Member of Profesional Body / Association: (Member), American Powder Metallurgy Institute
  • 1999 - 2014: Member of Profesional Body / Association: (Member), American Society of Mechanical Engineers
  • 2011: Member of Profesional Body / Association: (Member), International Association of Engineers
  • 2020: Member of Profesional Body / Association: (Graduate Engineer), Board of Engineers Malaysia
  • 2021: Member of Profesional Body / Association: (Candidate to the engineering profession), Ordre des Ingenieurs du Quebec
  • 2022: Member of Profesional Body / Association: (Associate Member), Malaysian Society for Engineering & Technology (MySET)


Teaching Responsibilities


ADVANCED MATERIALS FOR AUTOMOTIVE APPLICATION 2016/2017 2009/2010 2008/2009 2007/2008
Advanced Mechanics of Materials 2023/2024
AEROSPACE ENGINEERING LAB II 2011/2012
AEROSPACE MATERIALS & MANUFACTURING PROCESS 2012/2013
AEROSPACE MATERIALS AND MANUFACTURING PROCESSES 2023/2024 2022/2023 2021/2022
APPLIED FINITE ELEMENT METHOD 2016/2017 2012/2013
AUTOMOTIVE INTEGRATED DESIGN 2018/2019
AUTOMOTIVE MANUFACTURING PROCESS 2018/2019 2016/2017
COMPUTATIONAL MECHANICS 2023/2024 2022/2023
COMPUTATIONAL METHODS AND STATISTICS 2006/2007
ENGINEERING CALCULUS II 2006/2007 2005/2006
FATIGUE AND FRACTURE MECHANICS 2015/2016 2014/2015 2013/2014
INTEGRATED DESIGN PROJECT 2023/2024 2019/2020 2018/2019 2017/2018 2016/2017 2014/2015
INTEGRATED DESIGN PROJECT (IDP) 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
INTERGRATED DESIGN PROJECT (IDP) 2017/2018
MANUFACTURING PROCESSES FOR AUTOMOTIVE ENGINE 2015/2016
MECHANICAL ENGINEERING LAB 1 2011/2012 2010/2011 2009/2010 2008/2009
MICRO ELECTROMECHANICAL SYSTEMS 2012/2013
NONDESTRUCTIVE EVALUATION OF STRUCTURES 2017/2018 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008 2006/2007
NONDESTUCTIVE TESTING AND EVALUATION 2008/2009
NUMERICAL METHODS FOR ENGINEERS 2005/2006 2004/2005
PHYSICS 2010/2011
PROJECT II 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
STATICS 2010/2011 2009/2010 2007/2008 2006/2007
STRUCTURAL MECHANICS 2013/2014 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
VEHICLE STRUCTURAL ANALYSIS AND DESIGN 2014/2015 2013/2014 2012/2013 2011/2012
VEHICLE STRUCTURAL DESIGN & MATERIALS SELECTION 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013
Vehicle Structures Design 2020/2021 2019/2020 2018/2019 2017/2018
VEHICLES STRUCTURE DESIGN 2021/2022


Supervision


Electromechanical Impedance Based Strategy For Health Monitoring Solar Cells.
Ph.D Completed 2023 Main Supervisor
An Investigation On Impact Behaviour Of Palm Empty Fruit Bunch (Efb) Composites Fabricated Using Light Resin Transfer Molding (Lrtm) For Bumper Application.
Ph.D Completed 2022 Co-supervisor
Hybrid Repair Of Cracked Plates Strengthened With Composite Patches.
Ph.D Completed 2020 Main Supervisor
A P-Finite Element Method Of A Three Dimensional Non-Uniform Asymmetric Beam Structure Of Arbitrary Polynomial Functions.
Ph.D Completed 2020 Co-supervisor
Carbon Dioxide Solar Assisted Heat Pump System For Space Cooling And Heating .
Ph.D Completed 2018 Co-supervisor
Numerical And Experimental Investigation Of Clinching Joints Of Dissimilar Metals.
Ph.D Completed 2017 Main Supervisor
Electromechanical Impedance Based Structural Health Monitoring Using Extreme Learning Machine.
Ph.D Completed 2017 Main Supervisor
Bayesian Analysis Of Partly Interval Censored Data Under Competing Risks Framework Using Engineering Data.
Ph.D Completed 2017 Co-supervisor
Development Of A Computational Method To Estimate Fluid Flow Rate In Oil Wells With An Electrical Submersible Pump.
Ph.D Completed 2016 Main Supervisor
Modeling And Experiment Of Piezoelectric Actuator In Active Repair Of Isotropic And Composite Structure.
Ph.D Completed 2016 Co-supervisor
Finite Element Analysis And Experimental Validation Of Incremental Sheet Metal Forming Process.
Ph.D Completed 2014 Main Supervisor
Risk Analysis Factors In Transportation System: Dubai As A Case Study.
Ph.D Completed 2012 Main Supervisor
A Gas Kinetic Bgk Scheme For The Two- And Three-Dimensional Compressible Flow.
Ph.D Completed 2010 Co-supervisor
A Gas Kinetic Bgk Scheme For The Two- And Three-Dimensional Compressible Flow.
Ph.D Completed 2010 Co-supervisor
Investigation Of Solid Particle Erosion Of Needle And Seat Choke Valves.
Ph.D In Progress Main Supervisor
Structural Health Monitoring Of Civil Engineering Structures Using Electro Mechanical Impedance Technique.
Ph.D In Progress Main Supervisor
Performance Assessment Approach For Crack Repair In Concrete Using Electromechanical Impedance And Machine Learning Techniques.
Ph.D In Progress Main Supervisor
Investigation Of Bird Strike Impact On Aircraft Propeller Blade.
Ph.D In Progress Co-supervisor
Evaluating The Reduction Of Stress Intensity Factor In Cracked Plates With Piezoelectric Actuators Under Mixed Mode Loading.
Master Completed 2020 Main Supervisor
Finite Element Analysis Of Edge Cracked Bimaterial Systems Under Thermal Loading.
Master Completed 2019 Main Supervisor
An Improved Higher Order Model For Analysis Of Composite Laminated Cylindrical Shell Under Thermal And Electromechanical Loads.
Master Completed 2019 Co-supervisor
Imputation Techniques For Reliability Analysis Based On Partly Interval Censored Data.
Master Completed 2017 Co-supervisor
Stress Analysis Of Thin-Walled Laminated Composite Beams.
Master Completed 2017 Co-supervisor
Development Of Battery Charge Balancing System For Electric Vehicle/Hybrid System For Electronic Vehicle.
Master Completed 2015 Co-supervisor
Finite Element Modeling Of Electro-Mechanical Impedance Technique For Structural Health Monitoring.
Master Completed 2014 Main Supervisor
Performance Evaluation Of Pvm With Water Filters And Infrared Reflective Glass Covers.
Master Completed 2014 Co-supervisor
Crack Repair Using Piezoelectric And Composite Patches Under Thermo-Mechanical Loading.
Master In Progress Main Supervisor
Performance Analysis And Optimization Of Hybrid Repair Of Aircraft Structures.
Master In Progress Main Supervisor
Electro-Mechanical Impedance Technique For Damage Monitoring Of Pipeline System Conveying Fluid.
Master In Progress Co-supervisor
Optimization Of Composite Laminate Under Thermo-Mechanical Loading Using Machine Learning Techniques.
Master In Progress Co-supervisor


Research Projects


Completed
2022 - 2023 Bengkel Merekabentuk & Mencetak Prototaip Roket Menggunakan 3D Printer
2020 - 2023 Impedance-based structural health monitoring using neural networks for detecting and classifying structural damage
2019 - 2023 Bird Strike Impact Investigation on Rotating Bladed-Propeller Engine considering an Unsteady Flow
2018 - 2018 PEC for Inspection of CUI in Pipes
2017 - 2020 Stress Analysis of Piezoelectric Embedded Structures Subjected to Combined Loading
2015 - 2019 Investigation of Piezoelectric Actuation Effect on Fracture Toughness of Isotropic Materials
2013 - 2017 Development of Green Transportation System
2013 - 2015 Development of Electro-Mechanical Impedance-Based Damage Detection Technique for Structural Health Monitoring
2013 - 2016 Wake Vortex Alleviation of a Wing with a Reverse Delta Wing Add-On Device Using Particle Image Velocimetry (PIV)
2010 - 2013 Development of a Thermoelectrically Air Conditioned Motorcycle Helmet
2009 - 2010 Design and Development of an "Urban Concept Hybrid Car"
2008 - 2012 Design and Development of an Automated Magnetic Particle Testing of Automotive parts.
2007 - 2013 Investigation of Crack Behaviour in Bonded Dissimilar Materials Under Thermal Loading
On-Going
2023 - Present STEM Education Awareness Program for Tahfiz Students: Enhancing Scientific Literacy
2022 - Present An Accurate Shear Deformable Finite Element Model for Stress Analysis of Functionally Graded Carbon Nanotubes Reinforced (FG-CNTR) Composite Laminates under Thermo-Electric-Mechanical Loads
2021 - Present A hybrid method combining active and passive repair mechanisms for reducing stress concentration in cracked aircraft structures.
2013 - Present IIUM Centre of Excellence for Electric Mobility (ICEM)
2012 - Present Proton Green Mobility


Award & Recognition


07 Oct, 2012 PGMC 2012 Overall Champion - PROTON & MOSTI National
07 Oct, 2012 PGMC 2012 - Farthest Distance Winner - PROTON & MOSTI National
07 Oct, 2012 PGMC 2012 - Fastest Two Laps Winner - PROTON & MOSTI National


Publications


Article

2024 A numerical comparison of 2D and 3D CFD modelling for contraction and expansion geometries with an emphasis on solid particles erosion. CFD Letters, 16 (6) pp. 157-168
2024 Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67) pp. 137-152
2023 Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2) pp. 1-3
2023 Analysis of damage control of thin plate with piezoelectric actuators using finite element and machine learning approach. Frattura ed Integrita Strutturale, 17 (66) pp. 112-126
2023 Buckling analysis of a thin-walled C-section channel under mechanical and thermal load. Journal of Advanced Research in Applied Mechanics, 109 (1) pp. 1-16
2023 Electromechanical impedance simulation-based evaluation of cracks in photovoltaic solar cells. Arabian Journal for Science and Engineering, () pp. 1-17
2023 Optimization of structural damage repair with single and double-sided composite patches through the finite element analysis and Taguchi method. Materials, 16 (4) pp. 1-14
2023 Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34) pp. 30824-30837
2023 Review of piezoelectric actuator applications in damaged structures: challenges and opportunities. ACS Omega, 8 (3) pp. 2844-2860
2023 Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, () pp. 1-18
2022 A review on reductions in the stress-intensity factor of cracked plates using bonded composite patches. Materials, 15 (9) pp. 1-20
2022 Bayesian analysis of masked competing risks data based on proportional subdistribution hazards model. Mathematics, 10 (17) pp. 1-10
2022 Improving electromechanical impedance damage detection under varying temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1) pp. 123-133
2022 Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal, 23 (1) pp. 412-423
2022 Numerical simulation of electromechanical impedance based crack detection of heated metallic structures. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 94 (2) pp. 77-88
2021 A review of piezoelectric material-based structural control and health monitoring techniques for engineering structures: challenges and opportunities. Actuators, 10 (5) pp. 1-26
2021 A systematic review of piezoelectric materials and energy harvesters for industrial applications. Sensors, 21 (12) pp. 1-27
2021 Estimation of stress intensity factor reduction for a center-cracked plate integrated with piezoelectric actuator and composite patch. Thin Walled Structures, 158 () pp. 1-15
2021 Experimental investigation of oil-water two-phase flow in horizontal, inclined, and vertical large-diameter pipes: determination of flow patterns, holdup, and pressure drop. SPE Production & Operations, 36 (4) pp. 946-961
2021 Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation, 53 (2) pp. 193-199
2020 A Bayesian approach to competing risks model with masked causes of failure and incomplete failure times. Mathematical Problems in Engineering, 2020 (Article ID 8248640) pp. 1-7
2020 CFD and experimental evaluation of R744 transcritical gas cooler used in solar assisted heat pump system. Elixir Mechanical Engineering, 145 () pp. 54726-54733
2020 Experimental study to evaluate the environmental impacts of disposed produced water on the surrounding ecosystems. International Journal of Environmental Science and Technology, 17 (3) pp. 1439-1454
2020 Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. Materials Today: Proceedings, 27 (2) pp. 1713-1719
2020 Regression analysis of masked competing risks data under cumulative incidence function framework. Austrian Journal of Statistics, 49 (3 (Special Issue)) pp. 25-29
2019 A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S) pp. 749-753
2019 Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer, 55 (8) pp. 2137-2151
2019 Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4) pp. 1139-1148
2019 Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 241-245
2019 Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal, 20 (2) pp. 211-221
2019 Effect of flow patterns on two-phase flow rate in vertical pipes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2) pp. 150-160
2019 Experimental investigation of gas–oil–water phase flow in vertical pipes: influence of gas injection on the total pressure gradient. Journal of Petroleum Exploration and Production Technology, 9 (4) pp. 3071-3078
2019 Experimental investigation of highā€‘viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient. Journal of Petroleum Exploration and Production Technology, 9 () pp. 2911-2918
2019 Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 235-240
2019 Optimization of incremental sheet metal forming process using grey relational analysis. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 246-252
2018 A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171 () pp. 1378-1389
2018 Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)) pp. 160-186
2018 Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2) pp. 1-13
2018 Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18) pp. 3656-3666
2018 Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters, 10 (2) pp. 18-27
2018 Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11) pp. 1-23
2018 Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue () pp. 238-243
2018 Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1) pp. 9-17
2018 Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development, 2018 (Special Issue) pp. 249-255
2017 Modeling approach to evaluating reduction in stress intensity factor in center-cracked plate with piezoelectric actuator patches. Journal of Intelligent Material Systems and Structures, 28 (10) pp. 1334-1345
2017 Numerical investigation of springback in mechanical clinching process. International Journal of Engineering Materials and Manufacture, 2 (4) pp. 86-93
2017 Using electromechanical impedance and extreme learning machine to detect and locate damage in structures. Journal of Nondestructive Evaluation, 36 (2) pp. 1-10
2016 Analysis of partly interval-censored data under competing risks framework. International Journal of Computer Science and Network Security, 16 (8) pp. 25-28
2016 Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4) pp. 179-195
2016 Kinetics of mullite formation from kaolinite and boehmite. Molecular Crystals and Liquid Crystals, 628 (1) pp. 55-64
2016 Modelling and simulation of impedance-based damage monitoring of structures. International Journal of Simulation Modelling, 15 (3) pp. 395-408
2016 Multi-objective optimization of clinching joints quality using Grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology, 87 () pp. 233-249
2016 Nonparametric estimate based on imputations techniques for interval and partly interval censored data . Science International Lahore, 28 (2 (Section A)) pp. 879-884
2016 Recent and future development of the application of finite element analysis in clinching process. International Journal of Advanced Manufacturing Technology, 84 (9) pp. 2589-2608
2016 Reliability analysis of multiphase flow measurements in different oil fields. Oil Gas European Magazine, 42 (3) pp. 133-139
2015 Damage detection in structures using electromechanical impedance and finite element analysis. Applied Mechanics and Materials, 799-80 () pp. 971-975
2015 Development of a novel method to estimate fluid flow rate in oil wells using electrical submersible pump. Journal of Petroleum Science and Engineering, 135 () pp. 466-475
2015 Effects of adhesive bond on active repair of aluminium plate using piezoelectric patch. Applied Mechanics and Materials, 799-80 () pp. 788-793
2015 Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research, 1115 () pp. 109-112
2015 Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research, 1115 () pp. 539-542
2015 Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research, 1115 () pp. 517-522
2015 Nondestructive evaluation of welded joints using digital image correlation. Journal of Nondestructive Evaluation, 34 (4) pp. 1-12
2015 Some methods for competing risks with and without masked cause of failure: a short review. Science International Lahore, 27 (2) pp. 1197-1201
2015 Stress analysis of thin-walled laminated composite beams. ARPN Journal of Engineering and Applied Sciences, 10 (21) pp. 10088-10095
2015 Survey of active structural control and repair using piezoelectric patches. Actuators, 4 () pp. 77-98
2015 The effect of piezoelectric actuation on stress distribution in aluminum plate with circular hole. ARPN Journal of Engineering and Applied Sciences, 10 (21) pp. 9723-9729
2015 Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal, 16 (2) pp. 31-42
2014 Significant parameters for the surface roughness in incremental forming process. Materials and Manufacturing Processes, 29 (6) pp. 697-703
2013 Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research, 13 () pp. 103-108
2013 Design and modelling of silicon MEMS accelerometer. International Journal of Engineering Systems Modelling and Simulation, 5 (4) pp. 181-187
2012 Analysis of thermal stress intensity factors for edge cracked bimaterial system. Advanced Materials Research, 576 () pp. 766-769
2012 Comparison of diesel emission experiments in view of the environment: a case study at Dubai. International Journal of Management Science and Engineering Management, 7 (1) pp. 36-42
2012 Detection of foreign bodies in canned foods using ultrasonic testing. International Food Research Journal, 19 (2) pp. 543-546
2012 Efficient cryogenic cooling during machining of rolled AISI 4340 steel. Advanced Materials Research, 576 () pp. 123-126
2012 Finite element investigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. International Journal of Engineering Systems Modelling and Simulation, 4 (4) pp. 169-173
2012 Improvement of greenhouse by reducing gas emissions using replacement policy. International Journal of Energy Technology and Policy, 8 (3/4/5/) pp. 323-335
2012 Monitoring of fatigue damage using ultrasonics and finite element analysis. Advanced Materials Research, 576 () pp. 655-658
2012 Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization. International Journal of Environmental Science and Technology , 9 (3) pp. 495-502
2011 Modeling the powder compaction process using the finite element method and inverse optimization . The International Journal of Advanced Manufacturing Technology, 56 (5-8) pp. 631-647
2011 Predicting density distribution in Green compacts using finite element simulations. Australian Journal of Basic and Applied Sciences, 5 (3) pp. 60-68
2011 Process simulation and quality evaluation of incremental sheet forming. IIUM Engineering Journal, 12 (3) pp. 185-196
2011 Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes, 26 () pp. 1404-1414
2011 Signal analysis of vibration measurements for condition monitoring of bearings. Australian Journal of Basic and Applied Sciences, 5 (1) pp. 70-78
2010 Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study . Journal of Thermophysics and Heat Transfer, 24 (1) pp. 165-172
2009 Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties. Advanced Powder Technology, 20 (6) pp. 548-553
2009 Edge-cracked bimaterial systems under thermal heating. International Journal of Solids and Structures, 46 (7-8) pp. 1648-1658
2009 On the characteristics of multistage evacuated solar distillation. Renewable Energy, 34 () pp. 1471-1478
2009 Statistical Signal Processing and Sorting for Acoustic Emission Monitoring of High-Temperature Pressure Components. Experimental Techniques, 33 (5) pp. 35-43
2009 Using acoustic emission and fractography to evaluate defects induced by corrosive environment. Corrosion Engineering, Science and Technology, 44 (4) pp. 251-260
2006 Design and development of sensor based traffic light system. American Journal of Applied Sciences , 3 (3) pp. 1745-1749
Conference or Workshop Item

2023 Real-time structural damage detection using EMI under varying load a and temperature conditions. In: 7th International Conference on Technology, Engineering and Science, IConTES 2023,
2022 Detection of unbalance and looseness faults in a ventilation turbine using vibration signature analysis. In: ICMAAE-2021,
2021 Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2021 Numerical modelling and applied simulation for the vibration monitoring of a ventilation turbine. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2021 Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21),
2021 Numerical Simulation of Electromechanical Impedance-Based Damage Monitoring of Metallic Structures. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2021 Temperature influence on electromechanical impedance method used for damage detection in metallic structure. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2020 Damage assessment on numerical modelling of rotating engine blades subjected to bird strike. In: International Symposium on Sustainable Aviation (ISSA 2020),
2020 Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. In: 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020,
2020 Stress analysis of plate with opposite semicircular notches and adhesively bonded piezoelectric actuators. In: 45th International Conference on Vibroengineering,
2018 Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018),
2018 Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018),
2018 Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18),
2018 Multi-objective optimization of incremental sheet metal forming. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18),
2017 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016. In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016",
2017 Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Impedance based detection of delamination in composite structures. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Parametric model based on imputations techniques for partly interval censored data. In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017,
2017 Validation of ESP oil wells measured parameters using simulation olga software. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2016 Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016,
2015 Aerodynamic performance of a naca 23012 half wing model with a reverse delta wing type add-on device . In: 8th Ankara International Aerospace Conference,
2015 Finite element modeling of clinching process for joining dissimilar materials. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014),
2015 Finite element simulation of electro-mechanical impedance technique. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014),
2014 A battery charge balancing system with reducing inrush high spike current for electric vehicle. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014),
2014 Derivation of stress intensity factor for a cracked plate with an integrated piezoelectric actuator. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014),
2013 An investigation of temperature effect on incremental forming. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2013 Course Continual Quality Improvement (CQI) implementation of Outcome-Based Education (OBE) in engineering education: the Kulliyyah of Engineering, IIUM experience. In: International Conference on Engineering Education 2013,
2013 Design and optimization of a micro capacitive pressure sensor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2013 Penang bridge 1 loading analysis using British standard and finite element method for structural health monitoring. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2013 Study of hardness and microstructure of Fe-C-Si-Mn-B hardfacing alloy. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2012 Design and simulation of a thermoelectric cooling system for motorcyclist helmet. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE’2012),
2011 Design and modeling of silicon MEMS accelerometer. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11,
2011 Detection of foreign bodies in canned foods using ultrasonic testing. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11,
2010 Development of an adaptive headlamp system. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010 Predicting density distribution in green compacts using finite element simulations. In: International Conference on Mathematical Applications in Engineering (ICMAE’10),
2010 Risk analysis factors of the emission in transportation a case study - Dubai taxi. In: 2nd International Conference on Engineering Systems Management and its Applications (ICESMA2010),
2010 Signal analysis of vibration measurements for condition monitoring of bearings. In: International Conference on Mathematical Applications in Engineering (ICMAE’10),
2010 Towards automatic testing and defect recognition in magnetic particle inspection. In: The 2nd International Conference on Engineering and ICT,
2010 Ultrasonic techniques for detection of thinning defects in metal plates. In: 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Sustainable Environment,
2009 Development of a system for automatic magnetic particle inspection of automotive components . In: Proceedings of 2nd CUTSE International Conference 2009 CUTSE'09,
Book

2011 Advanced topics in mechanical behavior of materials. IIUM Press, ISBN: 978-967-418-174-1
Book Section

2019 Gas–liquid two-phase upward flow through a vertical pipe. In: MDPI, ISBN: 978-3-03921-427-3, pp. 198-220
2017 Effect of periodic drying on energy utilization, product quality, and drying time. In: CRC Press - Taylor & Francis Group, ISBN: 9781138746299, pp. 19-32
2016 Drying of fruits and vegetables: The impact of different drying methods on product quality. In: CRC Press, ISBN: 978-1-4987-3499-8, pp. 189-215
2014 Edge Crack, Bimaterial Systems. In: Springer Reference, ISBN: 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle), pp. 1085-1092
2014 Edge crack, composite materials. In: Springer Reference, ISBN: 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle), pp. 1092-1100
2014 Edge crack, isotropic material. In: Springer Reference, ISBN: 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle), pp. 1100-1109
2011 Corrosion detection in aircraft structures by ultrasonic method.. In: IIUM Press, ISBN: 978-967-418-148-2, pp. 45-54
2011 Development of automatic magnetic particle system for automotive parts inspection. In: IIUM Press, ISBN: 978-967-418-216-8, pp. 160-165
2011 Enhancing magnetic particle testing of automotive parts . In: IIUM Press, ISBN: 9789674181741, pp. 189-195
2011 Experimental studies of dieless forming . In: IIUM Press, ISBN: 9789674181741, pp. 167-171
2011 Fatigue damage characterization of aluminum alloy plates. In: IIUM Press, ISBN: 978-967-418-148-2, pp. 55-62
2011 Finite element modeling of the powder compaction process. . In: IIUM Press, ISBN: 978-967-418-020-1, pp. 203-252
2011 General framework for inverse identification of consecutive parameters. In: IIUM Press, ISBN: 9789674181741, pp. 177-182
2011 Inverse parameter identification of elastic and inelastic constitutive material models . In: IIUM Press, ISBN: 9789674181741, pp. 183-188
2011 Mechanical properties of sintered aluminum alloy compacts . In: IIUM Press, ISBN: 978-967-418-174-1, pp. 156-160
2011 Numerical simulation of green compacts . In: IIUM Press, ISBN: 978-967-418-174-1, pp. 161-166
2011 Overview of the powder metallurgy process . In: IIUM Press, ISBN: 9789674181741, pp. 151-155
2011 Performance of an automatic magnetic particle inspection of automotive parts. In: IIUM Press, ISBN: 978-967-418-216-8, pp. 166-171
2011 Study of spot welding process . In: IIUM Press, ISBN: 9789674181741, pp. 172-176
2011 Thermal analysis of a micro device used for detection of colorectal cancer. In: IIUM Press, ISBN: 9789674181581, pp. 220-228
2009 An Integrated approach of ethics and professional issues into engeneering curriculum.. In: IIUM Press, ISBN: 9789833855674, pp. 275-281
Monograph

2019 Investigation of piezoelectric actuation effect on fracture toughness of isotropic materials. In: ,
2015 Development of Electro-Mechanical Impedance-Based Damage Detection Technique for Structural Health Monitoring. In: [s.n],
2013 Development of a thermoelectrically air conditioned motorcycle helmet. In: s.n,
2012 Design and development of an automated magnetic particle testing of automotive parts.. In: [s.n],