Researchers

Researchers

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Asan Gani Bin Abdul Muthalif
Associate Professor

Print CV Email Me

Staff Details

Area of Specialisation

  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Robotics and Mechatronics

Teaching Responsibilities

ACTIVE CONTROL OF VIBRATION 2016/2017 2018/2019
ADVANCED CONTROL SYSTEM 2009/2010 2010/2011
CONTROL SYSTEMS I 2017/2018
ENGINEERING INDUSTRIAL TRAINING 2001/2002 2002/2003 2003/2004
ENGINEERING INDUSTRIAL TRANING 2001/2002
INSTRUMENTATION AND CONTROL 2009/2010
MECHANICAL VIBRATION 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016
MECHANICAL VIBRATIONS 2009/2010 2010/2011 2011/2012 2012/2013 2014/2015
MECHATRONICS ENGINEERING LAB II 2017/2018 2018/2019
MODERN CONTROL DESIGN 2009/2010
MODERN CONTROL SYSTEMS 2009/2010
SEMINAR 2009/2010
SIGNAL AND SYSTEMS ANALYSIS 2003/2004 2009/2010
SIGNAL AND SYSTEMS ANALYSIS (lab) 2003/2004
SIGNALS AND SYSTEMS 2003/2004
SYSTEM DYNAMICS 2011/2012
SYSTEMS DYNAMICS AND CONTROL 2011/2012
VIBRATION ANALYSIS AND CONTROL 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018

Research Projects

Completed
2019 - 2019 Development of an ultrasonic vibration device for uEDM operation
2019 - 2019 Development of an Intelligent Knowledgebase for uEDM Operation
2017 - 2020 Design and Control of an Ionic Polymer Metal Composite (IPMC) Based Artificial Muscle using Biosignals.
2017 - 2020 Design and Control of an Ionic Polymer Metal Composite (IPMC) Based Artificial Muscle using Biosignals.
2016 - 2019 Rotating Piezoelectric Energy Harvester of Wearable Devices
2016 - 2019 Development of a Prototype of Carbon Nanotube based Angular Sensor
2016 - 2019 Rotating Piezoelectric Energy Harvester of Wearable Devices
2016 - 2019 Development of a Prototype of Carbon Nanotube based Angular Sensor
2015 - 2019 Active Noise Control System Evaluation and Optimization for Internal Combustion Engine Downsizing
2015 - 2019 Active Noise Control System Evaluation and Optimization for Internal Combustion Engine Downsizing
2014 - 2018 Mathematical Analysis to Estimate Optimal Shunt Impedance for Piezoelectric Transducer to Maximize Vibration Energy Dissipation in Non-Deterministic Sub-Systems
2014 - 2016 Real Time Anomaly Detection for Street Crime Surveillance
2014 - 2017 Development of a 3-D ?-Patterning Process for Vertically Aligned Cardon Nanotubes (VACNT) for New Types of Sensor Fabrication
2014 - 2017 Investigation on the Effect Of "Nano-Powder" in Micro-Wire Electro-Discharge Machining (?-WEDM) Process for Fabricating Micro Actuators with Nanometric Mirror Surface
2014 - 2016 Real Time Anomaly Detection for Street Crime Surveillance
2014 - 2017 Development of a 3-D ?-Patterning Process for Vertically Aligned Cardon Nanotubes (VACNT) for New Types of Sensor Fabrication
2014 - 2018 Mathematical Analysis to Estimate Optimal Shunt Impedance for Piezoelectric Transducer to Maximize Vibration Energy Dissipation in Non-Deterministic Sub-Systems
2014 - 2017 Investigation on the Effect Of "Nano-Powder" in Micro-Wire Electro-Discharge Machining (?-WEDM) Process for Fabricating Micro Actuators with Nanometric Mirror Surface
2014 - 2017 Experimental Investigation of Self-sensing of Vibration Capability of MR Damper
2014 - 2017 Experimental Investigation of Self-sensing of Vibration Capability of MR Damper
2013 - 2015 Development of a BCI (Brain Computer Interface) and Shape Memory Alloy Based (SMA) Assistive Hand for Disabled People
2013 - 2016 Parametric Investigation to Optimize Dynamic Range of Magnetorheological Damper for Prosthetic Limbs
2013 - 2016 Parametric Investigation to Optimize Dynamic Range of Magnetorheological Damper for Prosthetic Limbs
2013 - 2016 Study of Effects of Patterning Process on Carbon Nanotube(CNT) Forest Surface
2013 - 2015 Development of a BCI (Brain Computer Interface) and Shape Memory Alloy Based (SMA) Assistive Hand for Disabled People
2013 - 2016 Study of Effects of Patterning Process on Carbon Nanotube(CNT) Forest Surface
2012 - 2014 Intelligent Parametric Modelling of Diabetic Retinopathy
2012 - 2014 Parametric Modelling and Intellingent Control for Vehicle Electrical Loads (VEL) using Fuzzy Logic Control and Particle Swarm Optimisation ( FLC-PSO)
2012 - 2012 NON-PROPULSION ELECTRICAL LOADS CONTROL STRATEGY (NoPELCS) FOR PROTON BERHAD
2012 - 2012 NON-PROPULSION ELECTRICAL LOADS CONTROL STRATEGY (NoPELCS) FOR PROTON BERHAD
2012 - 2014 Parametric Modelling and Intellingent Control for Vehicle Electrical Loads (VEL) using Fuzzy Logic Control and Particle Swarm Optimisation ( FLC-PSO)
2012 - 2014 Intelligent Parametric Modelling of Diabetic Retinopathy
2011 - 2013 RU 2011: Analytic and Experimental Parametric Investigation for Optimizing Dynamic Range of Magnetorheological Fluid Dampers
2011 - 2011 Prototype model development to study active vibration isolation for FSO using Electromagnetic Actuator
2011 - 2013 RU 2011: Analytic and Experimental Parametric Investigation for Optimizing Dynamic Range of Magnetorheological Fluid Dampers
2011 - 2014 Development of a Novel Chatter Model and Active Chatter Control Strategies for Turning Operation
2011 - 2014 A Novel Mathematical Analysis of Magneto-Rheological (MR) Fluid Damper
2011 - 2014 Mathematical Analysis for Estimating Power Delivered by Piezoelectric Actuators on Structures with High Modal Overlap
2011 - 2012 Mechatronics Engineering Projects : Theory And Applications (KVC Projects 2011)
2011 - 2012 Mechatronics Book Series - Selected ICOM Paper (Volume 1 And 2)- KVC Project 2011
2011 - 2012 Design And Fabrication Of A Prototype Model Of Vibration Isolation Table.
2011 - 2011 Prototype model development to study active vibration isolation for FSO using Electromagnetic Actuator
2011 - 2012 Design And Fabrication Of A Prototype Model Of Vibration Isolation Table.
2011 - 2012 Mechatronics Book Series - Selected ICOM Paper (Volume 1 And 2)- KVC Project 2011
2011 - 2012 Mechatronics Engineering Projects : Theory And Applications (KVC Projects 2011)
2011 - 2014 Mathematical Analysis for Estimating Power Delivered by Piezoelectric Actuators on Structures with High Modal Overlap
2011 - 2014 A Novel Mathematical Analysis of Magneto-Rheological (MR) Fluid Damper
2011 - 2014 Development of a Novel Chatter Model and Active Chatter Control Strategies for Turning Operation
2010 - 2012 A Study and Verification on The Average Power Given by Piezoelectric Materials to Non-Deterministic Subsystems
2010 - 2012 Design and Fabrication of Stewart platform for tracking and vibration isolation for free space optic transmission
2010 - 2012 Animal Sound Activity Detection using support vector machines
2010 - 2012 Design and Fabrication of Stewart platform for tracking and vibration isolation for free space optic transmission
2010 - 2012 Animal Sound Activity Detection using support vector machines
2010 - 2012 A Study and Verification on The Average Power Given by Piezoelectric Materials to Non-Deterministic Subsystems
In Progress
2019 - Present Development of an Intelligent Knowledgebase for uEDM Operation
2019 - Present Development of an Intelligent Knowledgebase for uEDM Operation
2018 - Present A Novel Parameterized Model Reduction Method for Piezoelectric Energy Harvesters
2018 - Present A Novel Mathematical Formulation of Hybrid Piezoelectric and Electromagnetic Dynamics for Micro Energy Harvesting
2018 - Present A Novel Parameterized Model Reduction Method for Piezoelectric Energy Harvesters
2018 - Present A Novel Mathematical Formulation of Hybrid Piezoelectric and Electromagnetic Dynamics for Micro Energy Harvesting
2011 - Present IIUM STRATEGIC TECHNOLOGIES AND ENGINEERING UNIT (ISTEU)
2011 - Present IIUM STRATEGIC TECHNOLOGIES AND ENGINEERING UNIT (ISTEU)
Unknown - Present Upgrading mySMARTleg: Prototype Scale Up of a User Intention-detecting Transfemoral for Microcontrolled Prosthetic Leg
Unknown - Present Upgrading mySMARTleg: Prototype Scale Up of a User Intention-detecting Transfemoral for Microcontrolled Prosthetic Leg

Publications

Article
2021 Voltage generation in piezoelectric energy harvesting with magnet: FEA simulation and experimental analysis. Journal of Science and Technology , 13 (2) pp.17-24
2020 Pavement condition analysis via vehicle mounted accelerometer data. IIUM Engineering Journal , 21 (1) pp.73-84
2018 General analysis of resonance coupled wireless power transfer (WPT) using inductive coils. Technical Gazette=Tehnicki Vjesnik , 25 (3) pp.720-726
2018 Optical characterization of tip bended vertically aligned carbon nanotubes array. Chemical Physics Letters , 711 pp.37-41
2018 Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining. International Journal of Advanced Manufacturing Technology , 99 (9) pp.3005-3015
2018 Control of transtibial prosthetic limb with magnetorheological fluid damper by using a fuzzy PID controller. Journal of Low Frequency Noise, Vibration & Active Control , 37 (4) pp.1067-1078
2018 Experimental investigation of static properties of magnetorheological elastomer. Iranian Journal of Science and Technology, Transaction of Mechanical Engineering , 42 (2) pp.185-197
2018 Semi-active torsional vibration isolation utilizing magnetorheological elastomer. Vibrations in Physical Systems , 29 pp.1-8
2017 Optical anisotropy in micromechanically rolled carbon nanotube forest. Electronic Materials Letters , 13 (5) pp.442-448
2017 Development of wireless power transfer system using resonance principle with security features. IIUM Engineering Journal , 18 (2) pp.117-127
2017 Empirical modeling of micromechanical bending process of vertically aligned carbon nanotube forest using response surface methodology. Cogent Engineering , 4 (1) pp.1-13
2017 Improved parameter estimation for MRF models for varying current. Advanced Science Letters , 23 (11) pp.11002-11006
2017 Semi-active vibration control using experimental model of magnetorheological damper with adaptive F-PID controller. Smart Structures and Systems, An International Journal , 20 (1) pp.85-97
2017 Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth. Microsystem Technologies , 23 (7) pp.2663-2674
2017 Analysis of mutual inductance and coupling factor of inductively coupled coils for wireless electricity. ARPN Journal of Engineering and Applied Sciences , 12 (13) pp.4007-4012
2017 Piezoelectric based broadband nonlinear vibration energy harvester using multiple magnets. International Journal of Industrial Electronics and Electrical Engineering , 5 (12) pp.47-51
2017 Robust vibration control of flexible panel:modeling and simulation. World Journal of Engineering , 14 (5) pp.433-442
2016 Enhancement of reflectance of densified vertically aligned carbon nanotube forests. Carbon Letters , 18 pp.67-70
2016 Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs). Fullerenes, Nanotubes and Carbon Nanostructures pp.88-99
2016 In-socket sensory system for transfemoral amputees using piezoelectric sensors: An efficacy study. IEEE/ASME Transactions on Mechatronics , 21 (5) pp.2466-2467
2016 Dynamic tuning of torsional transmissibility using magnetorheological elastomer: Modelling and experimental verification. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering , 40 (3) pp.181-187
2016 Investigating negative capacitance shunt circuit for broadband vibration damping and utilizing ACO for optimization. International Journal of Circuits and Electronics, , 1 pp.168-173
2016 Investigation of anisotropic reflectance from densified arrays of vertically aligned carbon nanotube forests (VACNTs). Chemical Physics Letters , 658 pp.343-346
2015 Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: modeling, simulation and experimental results. Mechanical Systems and Signal Processing , 54-55 pp.417-426
2015 Estimating perturbation in eigenvalues for robust vibration controller design: analytical derivation and simulation. International Journal of Engineering Systems Modelling and Simulation , 7 (2) pp.95-102
2015 Experimental study on improving μ- WEDM and μ-EDM of doped silicon by temporary metallic coating. International Journal of Advanced Manufacturing Technology , 78 pp.1651-1663
2015 A piezoelectric based energy harvester with magnetic interactions: modelling and simulation. Advanced Materials Research , 1115 pp.549-554
2015 Development of an angle sensor using optical polarizer. ARPN Journal of Engineering and Applied Sciences , 10 (23) pp.17416-17420
2014 Estimating ensemble average power delivered by a piezoelectric patch actuator to a non-deterministic subsystem. Journal of Sound and Vibration , 333 (4) pp.1149-1162
2014 Hybrid DE-PEM algorithm for identification of UAV helicopter. Aircraft Engineering and Aerospace Technology , 86 (5) pp.385-405
2014 Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating. Journal of Manufacturing Technology Research , 5 (1-2) pp.1-17
2014 A complete system modelling of Piezoelectric Energy Harvester (PEH) with Silicon Carbide (SiC) Used as cantilever base. Jurnal Teknologi (Sciences and Engineering) , 69 (8) pp.47-52
2014 Active vibration control using piezoelectric actuator: implementation of ant colony optimization technique in virtual experimentation. International Journal of Simulation, Systems, Science & Technology , 15 (3) pp.57-62
2013 Active vibration isolation system to improve free space optics communication. Lecture Notes in Electrical Engineering , 211 pp.369-378
2013 Development of real time experimental system for investigating photochromic response to UV irradiation. IOP Conference Series: Materials Science and Engineering , 53 (1) pp.1-8
2013 Ant colony optimization for controller and sensor-actuator location in active vibration control . Journal of Low Frequency Noise, Vibration and Active Control , 32 (4) pp.293-308
2013 Novel design of a self powered and self sensing magneto-rheological damper. IOP Conference Series: Materials Science and Engineering , 53 (Conf.1) pp.012048-1
2013 Power input to non-deterministic subsystems via piezoelectric patch actuators: effect of the patch size and location. Journal of Physics: Conference Series , 423 (1) pp.1-8
2013 ANT colony optimization for controller and sensor-actuator location in active vibration control. Journal of Low Frequency Noise, Vibration and Active Control , 32 (4) pp.293-308
2012 Active dynamic vibration absorber for broadband control of a multi-mode system: Simulation and experimental verification. Journal of Low Frequency Noise, Vibration and Active Control , 31 (3) pp.159-173
2012 Optimal damper location for mid-high frequency vibration control on built-up structures: case study using VA one. Applied Mechanics and Materials , 105/7 pp.705-709
2012 Active vibration isolation system for free space optic communication: virtual prototyping using LabVIEW-SolidWorks. Applied Mechanics and Materials , 105/7 pp.733-737
2012 Fuzzy-based temperature and humidity control for HV AC of electric vehicle. Procedia Engineering , 41 pp.904-910
2012 Design and fabrication of active vibration isolation system for free space optics communication. Advanced Materials Research , 576 pp.753-756
2012 Active control of high-frequency vibration: optimisation using the hybrid modelling method. Journal of Sound and Vibration , 331 (13) pp.2969-2983
2012 Evaluation of different control policies of semi-active MR fluid damper of a quarter-car model. Applied Mechanics and Materials , 165 pp.310-315
2012 Parallel manipulator for auto tracking system: virtual prototyping using LabVIEW- Solidworks. Advanced Materials Research
2012 Design and development of active vibration isolation system for free space optics communication. Advanced Materials Research
2012 Fuzzy-PID controller for semi-active vibration control using magnetorheological fluid damper . Procedia Engineering
2012 Vibration energy harvesting using single and comb-shaped piezoelectric beam structures: modeling and simulation. Procedia Engineering , 41 pp.1228-1234
2012 Wideband vibration control in multi degree of freedom system: experimental verification using LabVIEW. Procedia Engineering , 41 (1) pp.1235-1243
2012 Harvesting vibration energy using piezoelectric material: modelling, simulation and experimental verifications. Mechatronics-The Science of Intelligent Machines , 23 (1) pp.61-66
2011 H∞ robust controller for autonomous helicopter hovering control. Aircraft Engineering and Aerospace Technology , 83 (6)
2011 H-inf robust controller for autonomous helicopter hovering control. Aircraft Engineering and Aerospace Technology , 83 (6)
2006 Compensated inverse pid controller for active vibration control with piezoelectric patches: modeling, simulation and implementation. IIUM Engineering Journal , 7 (2) pp.43-59
2004 Vibration Faults Simulation System(VFSS): a lab equipment to aid teaching of Mechatronics Courses. International Journal of Engineering Education , 20 (1) pp.61-69

Conference or Workshop Item
2019 Prototype of single degree of freedom optical resolver. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18)
2017 Mechatronics technology in predictive maintenance method. In: 6th International Conference on Mechatronics - ICOM'17
2017 An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining. In: 2017 World Congress on Micro and Nano Manufacturing
2017 An experimental investigation on the effect of nanopowder for micro-wire electro discharge machining of gold coated silicon. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016)
2017 Hybrid of conical and spiral approach for wireless power transfer. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016)
2016 Anisotropic carbon nanotube for new type of angle sensor development. In: International Conference on Advances in Functional Materials (AFM 2016)
2016 An experimental investigation of gold coated silicon using nano powder mixed micro-wire electro discharge machining. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016)
2016 Resonant coils analysis for inductively coupled wireless power transfer applications. In: 2016 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2016)
2015 Optimal particle ratio to maximize the dynamic range of Magnetorheological Fluid (MRF) damper for prosthetic limb. In: 2015 10th Asian Control Conference (ASCC 2015)
2014 Optimization in active vibration control: virtual experimentation using COMSOL multiphysics - MATLAB integration . In: 2014 Fifth International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2014)
2014 Improving μ-wire electro-discharge machining operation of polished silicon wafer by conductive coating. In: 9th International Conference on MicroManufacturing (ICOMM 2014)
2014 Piezoelectric based vibration energy harvester with tip attraction magnetic force: modeling and simulation . In: Mathematics and Computers in Science and Industry (MCSI)
2013 Low voltage DC power supply with spike-blocking features. In: 2013 IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Life (I2MTC 2013)
2013 Industrial training outcomes: Kulliyyah of Engineering practice as a case study . In: International Conference on Engineering Education 2013
2013 Comb-shaped piezoelectric beam configuration for wideband vibration based energy scavenging: Analytical and simulation results. In: 20th International Congress on Sound and Vibration (ICSV20)
2013 Ant colony optimization for controller and sensor-actuator location in active vibration control. In: International Conference on Modern Trends in Science, Engineering and Technology 2013 (ICMTSET 2013)
2012 Regulation of stable low voltage power supply through phase angle modulation: simulation details. In: 4th International Conference on Computer and Communication Engineering, Kuala Lumpur
2012 Ripple voltage and its elimination in low voltage power supply. In: 4th International Conference on Computer and Communication Engineering, Kuala Lumpur
2011 Robust H-infinity controller synthesis using multi-objectives differential evolution algorithm (MODE) for two-mass-spring system. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO)
2011 Optimization of PID controller for flexible link system using a pareto-based multi-objective differential (PMODE) evolution. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2011 Animal sound activity detection using multi-class support vector machines . In: 4th International Conference on Mechatronics (ICOM)
2011 Design and development an active mass damper for broadband vibration control. In: 4th International Conference on Mechatronics (ICOM)
2011 Optimizing dynamic range of magnetorheological fluid dampers: modeling and simulation. In: 4th International Conference on Mechatronics (ICOM)
2011 Transform based approach for ECG period normalization. In: Computing in Cardiology (CinC 2011)
2011 Vibration based energy harvesting using piezoelectric material. In: 4th International Conference on Mechatronics (ICOM)
2011 Optimizing of PID controller for flexible link system using a Pareto-based Multi-objective differential (PMODE) evolution. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011)
2006 Active control of high frequency vibration in uncertain structures. In: The 13th International Congress on Sound and Vibration
2003 Active vibration control of a beam with piezoelectric patches: real-time implementation with xPC target. In: Conference on Control Applications
2003 Active suppression of vibration modes with piezoelectric patches: modeling, simulation and experimentation. In: IASTED international conference on Applied Simulation and Modeling (ASM 2003)
2002 A LabVIEW based data acquisition system for vibration monitoring and analysis. In: 2002 Student Conference on Research and Development Proceedings
2002 Vibration Faults Simulation System (VFSS): A System for teaching and training on fault detection and diagnosis. In: Student Conference on Research and Development
2001 Machine condition monitoring and fault diagnosis using spectral analysis techniques. In: First International Conference on Mechatronics

Book
2011 Mechatronics engineering projects : theory and applications. IIUM Press . ISBN 9789674181925
2011 Mechatronics book series system design and signal processing (V1). IIUM Press . ISBN 9789674181734
2011 Mechatronics book series – selected papers from ICOM’01, ICOM’05 and ICOM’08. IIUM Press . ISBN 9789670225685

Book Section
2019 The Kulliyyah of Architecture and Environmental Design: building on rich heritage. In: The International Islamic University Malaysia: the garden of knowledge and virtue IIUM Press . ISBN 978-967-491-035-8 , pp.279-287
2019 The Kulliyyah of Engineering: producing Muslim engineers. In: The International Islamic University Malaysia: the garden of knowledge and virtue IIUM Press . ISBN 978-967-491-035-8 , pp.289-303
2015 Dynamic effects of piezoelectric patch actuators on vibrational response of non-deterministic structures: modelling and simulations. In: Springer Series in Materials Science Springer . ISBN 0933-033X , pp.313-335
2011 Full-wave rectification of a low-voltage source . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.99-106
2011 Auto cruise system: A system to assist during traffic congestion. In: Mechatronics Book Series: Selected Papers from ICOM '01, ICOM '02, ICOM '03 IIUM Press . ISBN 9789670225685 , pp.17-23
2011 Machine condition monitoring and fault diagnosis using spectral analysis techniques. In: Mechatronics book series - selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.509-519
2011 Active suspension system: part 1 - mathematical modelling. In: Mechatronic Book Series: Control and Intelligent Systems IIUM Press . ISBN 9789674181765 , pp.322-326
2011 Active suspension system: Part 2 - Controller design and simulation. In: Mechatronic book series: Control and intelligent systems IIUM Press . ISBN 9789674181765 , pp.327-331
2011 Optimized LQR controller synthesis for 3DOF helicopter using multi-objective differential evolution(MODE) . In: Computational intelligence in robust control: theory and application IIUM Press . ISBN 9789674181963 , pp.57-88
2011 Self Powered Solar Tracking System. In: Mechatronics Engineering Projects: Theory and Applications IIUM Press . ISBN 978-967-418-192-5 , pp.41-65
2011 Development of experimental station for earthquake prediction. In: Mechatronics book series system design and signal processing IIUM Press . ISBN 9789674181734 , pp.109-116
2011 Earthquake prediction and monitoring using unusual animal behavior. In: Mechatronics book series system design and signal processing IIUM Press . ISBN 9789674181734 , pp.134-140
2011 A brief overview of biomechatronics and its applications. In: Mechatronics Book Series: System design and Signal Processing (Volume 2) IIUM Press . ISBN 9789674181321 , pp.1-6
2011 Self-powered solar tracking system part 1: system modeling and hardware selections. In: Mechatronics Book Series: System design and Signal Processing - Volume 2 IIUM Press . ISBN 9789674181321 , pp.7-13
2011 Self-powered solar tracking system part 2: system design. In: Mechatronics Book Series: System design and Signal Processing - Volume 2 IIUM Press . ISBN 9789674181321 , pp.14-18
2011 Self-powered solar tracking system part 3 : system integration and testing. In: Mechatronics Book Series: System design and Signal Processing - Volume 2 IIUM Press . ISBN 9789674181321 , pp.19-24
2011 Smart system for monitoring electrical power usage at homes. In: Mechatronics Book Series: System design and Signal Processing - Volume 2 IIUM Press . ISBN 9789674181321 , pp.25-29
2011 Vibration based predictive maintenance: common rotating machinery faults and their signatures. In: Mechatronics Book Series: System design and Signal Processing - Volume 2 IIUM Press . ISBN 9789674181321 , pp.30-37
2011 Spikes blocking and surge protection . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.83-88
2011 Voltage supply and voltage regulation . In: Principle of Transducer Devices and Components IIUM Press . ISBN 978-967-418-172-7 , pp.89-97
Advanced Search

International Islamic University Malaysia

P.O. Box 10, 50728 Kuala Lumpur

Phone : (+603) 6421 6421
Fax : (+603) 6421 4053
Email : webmaster@iium.edu.my

Students & Parents
Researchers, Lecturers & Alumni
Business, Government & Related Links
Others
Official Website of International Islamic University Malaysia.
© 2024 International Islamic University Malaysia. All rights reserved.
Last Updates : 2024-04-17 16:44:24
Testoutside | Sitemap | RSS Feeds