Article |
2019 |
Calcium phosphate /poly (ethylene glycol) bone cement: cell culture performance. International Journal of Recent Technology and Engineering
, 7
(6)
pp.82-86
|
2018 |
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceramics International
, 44
(8)
pp.8922-8927
|
2018 |
Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology
, 32
(1)
pp.91-102
|
2018 |
Incorporation of poly(Vinyl alcohol) for the improved properties of hydrothermal derived calcium phosphate cements. Indonesian Journal of Chemistry
, 18
(2)
pp.354-361
|
2018 |
The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International
, 44
(2)
pp.1802-1811
|
2018 |
Carbon nanotubes grown on oil palm shell powdered activated carbon as less hazardous and cheap substrate. Applied Nanoscience (Switzerland)
, 8
(7)
pp.1767-1779
|
2018 |
Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement. IIUM Engineering Journal
, 19
(2)
pp.192-202
|
2017 |
Different oxidation treatments on polystyerene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of the Pakistan Academy of Sciences: B. Life and Ennvironmental Sciences
, 54
(1B)
pp.55-59
|
2017 |
Recent development of calcium phosphate based coating on titanium alloy implants. Surface Engineering and Applied Electrochemistry
, 53
(5)
pp.419-433
|
2017 |
Statistical optimization of gelatin immobilization on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi
, 79
(6)
pp.167-175
|
2017 |
Statistical optimization of gelatin immobilisation on modified surface of PCL microcarrier to improve its compatibility. Jurnal Teknologi
, 79
(6)
pp.167-175
|
2017 |
Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of Pakistan Academy of Sciences: B. Life and Environmental Sciences
, 54 (B)
(1)
pp.59-64
|
2017 |
Physicochemical characteristics of magnesium hydroxyapatite (MgHA) derived via wet precipitation method. Journal of Mechanical Engineering
, SI 4
(5)
pp.209-216
|
2017 |
Calcium phosphate cement for bone filler applications. Journal of Advanced Research in Materials Science
, 39
(1)
pp.20-31
|
2017 |
Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds. Ceramics International
, 43
(15)
pp.12263-12269
|
2017 |
Optimization of ultraviolet ozone treatment process for improvement of polycaprolactone (PCL) microcarrier performance. Cytotechnology
, 69
(4)
pp.601-616
|
2017 |
Statistical optimization of gelatin immobilisation on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi
, 79
(6)
pp.167-175
|
2017 |
Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3)system. Proceedings of Pakistan Academy of Sciences
, 54
(1B)
pp.59-65
|
2016 |
Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences
, 11
(24)
pp.14097-14100
|
2016 |
Fabrication and sintering behavior of zinc-doped biphasic calcium phosphate bioceramics. Materials and Manufacturing Processes
, 31
(6)
pp.713-718
|
2016 |
Recent developments on injectable calcium phosphate bone cement. Recent Patents on Materials Science
, 9
(2)
pp.72-94
|
2015 |
Synthesis and characterization of nanocrystalline hydroxyapatite powder. Advanced Materials Research
, 1087
pp.142-146
|
2015 |
Magnesium doped hydroxyapatite through mechanochemical synthesis. Advanced Materials Research
, 1087
pp.329-333
|
2015 |
Thermal analysis on dehydroxylation of sol-gel derived zinc doped calcium phosphate powders. Advanced Materials Research
, 1115
pp.353-356
|
2015 |
Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies. Advanced Materials Research
, 1115
pp.341-344
|
2015 |
Cement bonded sol-gel TiO2 powder photocatalysis for phenol removal. Applied Mechanics and Materials
, 776
pp.271-276
|
2015 |
Bone implant materials from eegshell waste. Applied Mechanics and Materials
, 776
pp.282-288
|
2015 |
Hydroxyapaptite layer formation on titanium alloys surface using micro-arc oxidation. ARPN Journal of Engineering and Applied Sciences
, 10
(21)
pp.10101-10108
|
2015 |
Fabrication and characterization of poly (ethylene oxide) for photo-electronic devices. ARPN Journal of Engineering and Applied Sciences
, 10
(22)
pp.17239-17241
|
2015 |
Ultraviolet/ozone treated polystyrene microcarriers for animal cell culture. Journal of Chemical Technology and Biotechnology
|
2015 |
Hydrophobic organosilica coating on steel and aluminium. ARPN Journal of Engineering and Applied Sciences
, 10
(22)
pp.17252-17255
|
2014 |
Synthesis and properties of biphasic calcium phosphate prepared by different methods. Advanced Materials Research
, 970
pp.20-25
|
2014 |
Investigations of the effects of initial Zn concentration and sintering conditions on the phase behavior and mechanical properties of Zn-doped bcp. Advances in Environmental Biology
, 8
(3(Spe))
pp.680-685
|
2014 |
Preparation of zinc doped-biphasic calcium phosphate/carbon nanotube composites. Advances in Environmental Biology
, 8
(3(Spe))
pp.787-791
|
2014 |
Conversion of strontium hydroxyapatite nanopowders to porous scaffolds for bone implant application. Applied Mechanics and Materials
, 607
pp.3-6
|
2014 |
Kinetics of cadmium adsorption by CNTs grown on PACs. International Journal of Nanoelectronics and Materials
, 7
(1)
pp.25-33
|
2014 |
Zinc-doped biphasic calcium phosphate nanopowders synthesized via sol-gel method. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry
, 53A
(5)
pp.152-158
|
2014 |
Sol-gel synthesis of Zn doped HA powders and their conversion to porous bodies . Applied Mechanics and Materials
, 493
pp.603-608
|
2014 |
The effects of excess calcium and aging media on mechanical properties of calcium phosphate filling materials. Advanced Materials Research
, 911
pp.195-199
|
2013 |
Natural photosensitizers for dye sensitized solar cells. International Journal of Renewable Energy Research (IJRER)
, 3
(1)
pp.138-143
|
2013 |
Development of porous calcium phosphate bioceramics for bone implant applications: a review. Recent Patents on Materials Science
, 6
pp.238-252
|
2013 |
Photocatalytic decomposition of acetaldehyde gas on TiO2-SiO2 thin film photocatalyst ― a kinetic analysis. Indian Journal of Chemical Technology
, 20
(2)
pp.137-144
|
2013 |
Mechanochemical synthesis of sodium doped hydroxyapatite powder. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry
, 52A
pp.739-743
|
2013 |
Development of triphasic calcium phosphate–carbon nanotubes (HA/TCP-CNT) composite: a preliminary study. Key Engineering Materials
, 531-32
pp.258-261
|
2013 |
Protein foaming-consolidation method for fabrication of
high performance porous bioceramics. Advanced Materials Research
, 622-23
pp.1759-1763
|
2012 |
Mechanochemical synthesis of hydroxyapatite nanopowder: Effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials
, 110-16
pp.3639-3644
|
2012 |
The effects of calcium excess,water amount and mixing time on the injectability of calcium phosphate filling materials. Applied Mechanics and Materials
, 110-16
pp.8-12
|
2012 |
Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatited powder. Applied Mechanics and Materials
, 117-19
pp.782-785
|
2012 |
Irradiation modification of epoxidized natural rubber/ethylene vinyl acetate/carbon nanotubes nanocomposites. Advanced Materials Research
, 364
pp.427-433
|
2012 |
Effects of forming parameters and sintering schedules to the
mechanical properties and microstructures of final components. Materials and Design
, 33
pp.153-157
|
2012 |
Floating porous alumina from protein foaming-consolidation technique for cell culture application. Ceramics International
, 38
pp.5287-5291
|
2012 |
Sintering behaviour of hydroxyapatite prepared from different routes. Materials and Design
, 34
pp.148-154
|
2012 |
Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite. Applied Mechanics and Materials
, 117-19
pp.829-832
|
2012 |
Preparation of Dense Biphasic Calcium Phosphate Ceramics using Eggshell Derived Nanopowders. Applied Mechanics and Materials
, 110-16
pp.3645-3649
|
2012 |
Sintering behavior of hydroxyapatite prepared from different routes. Materials and Design
, 34
pp.148-154
|
2012 |
Effect of hydroxyapatite and tricalcium phosphate addition
on protein foaming-consolidation porous alumina. Journal of Porous Materials
, 19
(5)
pp.733-743
|
2012 |
Porous alumina–hydroxyapatite composites through protein foaming–consolidation method. Journal of the Mechanical Behavior of Biomedical Materials
, 8
pp.86-98
|
2012 |
Doping metal into calcium phosphate phase for better performance of bone implant materials. Recent Patents on Materials Science
, 5
pp.18-47
|
2011 |
Effects of powder synthesis method on the sinterability of hydroxyapatite. Advanced Materials Research
, 264/5
pp.1538-1544
|
2011 |
Effect of nano silica on the sinterability of hydroxyapatite dense bodies. Advanced Materials Research
, 2634-5
pp.1832-1838
|
2011 |
Synthesis of high fracture toughness of hydroxyapatite bioceramics. Advanced Materials Research
, 264/5
pp.1849-1855
|
2011 |
Fabrication of ceramic membrane chromatography for biologics purification. IIUM Engineering Journal
, 12
(4)
pp.115-124
|
2011 |
Synthesis of hydroxyapatite through dry mechanomical method and its conversion to dense bodies: preliminary result. IFMBE proceedings
, 35
pp.97-101
|
2011 |
Effects of bismuth oxide on the properties of calcium phosphate bioceramics. Advanced Materials Research
, 264/5
pp.1839-1848
|
2011 |
Thermal analysis on hydroxyapatite synthesis through mechanochemical method . IFMBE proceedings
, 35
pp.108-111
|
2011 |
Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal
, 12
(1)
pp.63-75
|
2011 |
Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research
, 265
pp.760-764
|
2011 |
Recent progress on hydroxyapatite-based dense biomaterials for load bearing bone substitutes
. Recent Patents on Materials Science
, 4
pp.63-80
|
2011 |
Sintering and properties of dense manganese-doped calcium
phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes
, 26
pp.908-914
|
2011 |
Effects of bismuth oxide on the sinterability of hydroxyapatite. Ceramics International
, 37
(2)
pp.599-606
|
2011 |
Stability and thermal conductivity enhancement of Carbon nanotube (CNT) nanofluid using gum Arabic . Journal of Experimental Nanoscience
, 6
(6)
pp.567-579
|
2011 |
Effects of manganese doping on the dielectric properties of titanium dioxide ceramics
. Ceramics International
, 37
(8)
pp.3703-3715
|
2011 |
Mechanochemical synthesis of nanosized hydroxyyapatite powder and its conversion to dense bodies. Materials Science Forum
, 694
pp.118-122
|
2011 |
Sodium-doped hydroxyapatite nanopowder through sol-gel method: synthesis and characterization. Materials Science Forum
, 694
pp.128-132
|
2011 |
Pressureless sintering of electro-conductive zirconia composites. Materials Science Forum
, 694
pp.304-308
|
2011 |
Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics. Materials Science Forum
, 694
pp.391-395
|
2011 |
Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical
properties. Asia-Pacific Journal of Chemical Engineering
, 6
pp.863-869
|
2011 |
Porous ceramics with controllable properties prepared by protein foaming-consolidation method. Journal of Porous Materials
, 18
(2)
pp.195-203
|
2011 |
Sintering of hydroxyapatite ceramic produced by wet chemical method. Advanced Materials Research
, 264/65
pp.1856-1861
|
2011 |
Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application. Malaysian Journal of Microscopy
, 7
pp.161-169
|
2011 |
Effect of hydroxyapatite and tricalcium phosphate addition
on protein foaming-consolidation porous alumina. Journal of Porous Materials
|
2011 |
Synthesis of Ti02 N anosized Powder Photocatalyst Via Solgel
Method for Bacteria Inactivation Application. Malaysian Journal of Microscopy
, 7
pp.161-169
|
2011 |
Surface modification of polystyrene beads by UV/Ozone treatment. Advanced Materials Research
, 264
pp.1532-1537
|
2011 |
Immobilization of TiO2 with cement: photocatalytic degradation of phenol and its kinetic studies . Indian Journal of Chemical Technology
, 18
(4)
pp.263-270
|
2011 |
Synthesis of various carbon nanomaterials (CNMs) on powdered activated carbon. African Journal of Biotechnology
, 10
(81)
pp.18892-18905
|
2010 |
Fabrication and characterization of strontium-doped hydroxypatite bioceramics scaffolds for bone implant application: a preliminary study. Advanced Materials Research
, 93-94
pp.401-404
|
2010 |
The growth study of vero cells in different type of microcarrier. Materials Sciences and Applications
, 1
(5)
pp.261-266
|
2010 |
Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering
, 8
pp.1-7
|
2010 |
Dense manganese doped biphasic calcium phosphate for load bearing bone implants. Advanced Materials Research
, 93-94
pp.393-396
|
2010 |
Manganese doping on biphasic calcium phosphate ceramics for
machanical improvement. Medical Journal of Malaysia
, 65
pp.14-16
|
2010 |
Phase behaviour of manganese-doped biphasic calcium phosphate ceramics synthesized via sol-gel method. Asia-Pacific Journal of Chemical Engineering
|
2010 |
Adhesion failure behavior of sputtered calcium phosphate
thin film coatings evaluated using microscratch testing. Journal of the Mechanical Behavior of Biomedical Materials
, 3
pp.324-330
|
2010 |
Concentration effect of aqueous synthesis on biphasic hydroxyapatite - β-tricalcium phosphate composition. Advanced Materials Research
, 93-94
pp.405-408
|
2009 |
Nanosized TiO2 photocatalyst powder via sol-gel method: effect of hydrolysis degree on powder properties. International Journal of Photoenergy
, 2009
pp.1-8
|
2009 |
Synthetic bone as a solution for halal bone grafts implantation: demand for bone graft has been increasing steadily. Halal Pages 2009/2010
pp.64-69
|
2009 |
Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B
, 23
(31)
pp.5811-5818
|
2009 |
Preparation of nano-structured manganese doped-biphasic calcium phosphate powders via sol-gel method. IONICS (Spinger)
, 15
pp.735-741
|
2009 |
Preparation and characterization of porous hydroxyapatite through polymeric sponge method. Ceramics International
, 35
(8)
pp.3161-3168
|
2009 |
Synthesis of TiO2-SiO2 powder photocatalyst via sol-gel method: effect of titanium precursor type on powder properties. Journal of the Institution of Engineers, Malaysia
, 70
(4)
pp.34-40
|
2009 |
Tio2 powder photocatalyst from sol-gel route and its immobilisation with cement for photocatalytic phenol removal. Journal of the Institution of Engineers, Malaysia
, 70
(4)
pp.49-56
|
2009 |
Synthesis SiO2-TiO2 powder and thin film photocatalyst through sol-gel. Indian journal chemistry A
, 48
(7)
pp.951-957
|
2009 |
Preparation of porous alumina for biomedical applications through protein foaming-consolidation method. Materials Research Innovations
, 13
(3)
pp.327-329
|
2009 |
Low temperature hydrothermal synthesis of calcium phosphate ceramics: effect of excess Ca precursor on phase behavior. Indian Journal Chemistry A
, 48A
pp.1492-1500
|
2009 |
Recent progress and development of TiO2 thin film photocatalysts for pollutant removal. Recent patents on materials science
, 2
(2)
pp.88-111
|
2009 |
Strontium-doped hydroxyapatite nanopowder via sol-gel method : effect of strontium concentration and calcination temperature on phase behavior. Trends in Biomaterials and Artificial Organs
, 23
(2)
pp.105-113
|
2009 |
Preparation of nanostructured manganese-doped biphasic calcium phosphate powders via sol–gel method. Ionics
, 15
(6)
pp.735-741
|
2008 |
Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry
, 47
(11)
pp.1626-1631
|
2008 |
Cell attachment study of chicken fibroblast cell(DF-1)
using ceramic microcarrier granule in bioreactors. The Medical Journal of Malaysia
, 63
(Sup A)
pp.18-20
|
2008 |
Synthesis and characterization of magnesium doped
biphasic calcium phosphate. The Medical Journal of Malaysia
, 63
(Sup A)
pp.83-84
|
2008 |
Influence of Manganes Doping into HA Powders on the
properties of its Dense Bodies. The Medical Journal of Malaysia
, 63
(Sup A)
pp.85-86
|
2008 |
Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research
, 47
pp.1189-1192
|
2007 |
Porous hydroxyapatite for artificial bone applications. Science and Technology of Advanced Materials
, 8
(1-2)
pp.116-123
|
Conference or Workshop Item |
2019 |
Miscibility, morphology and mechanical properties of compatibilized polylactic acid/thermoplastic polyurethane blends.
In: 6th International Conference on Recent Advances in Materials, Minerals and Environment, RAMM 2018
|
2018 |
Effects of sintering time and temperature to the characteristics of FeCrAl powder compacts formed at elevated temperature.
In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017"
|
2018 |
The effects of excess calcium on the handling and mechanical properties of hydrothermal derived calcium phosphate bone cement.
In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
|
2018 |
Antiwashout behavior of calcium phosphate cement incorporated with poly(ethylene glycol).
In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
|
2018 |
Effects of forming temperature and sintering rate to the final properties of FeCuAl powder compacts formed through uniaxial die compaction process.
In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
|
2018 |
Effects of sintering schedule to the characteristics of FeCrAl powder compacts formed at elevated temperature.
In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
|
2018 |
Electrospun Poly (Vinyl Alcohol) (PVA) fiber mats as carriers for extract from agarwood branch.
In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018)
|
2018 |
Surface modification of polycaprolactone (PCL) microcarrier for performance improvement of human skin fibroblast cell culture.
In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
|
2017 |
Effect of Poly(Vinyl Alcohol) addition on the properties of hydrothermal derived calcium phosphate cement for bone filling materials.
In: 2nd International Conference on Materials Engineering and Nanotechnology (ICMEN2017)
|
2017 |
Characteristic features of plasma electrolytic treated layers in Na3PO4 solution.
In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016)
|
2017 |
Novel injectable calcium phosphate bone cement from wet
chemical precipitation method.
In: 2nd International Conference on Materials Engineering and Nanotechnology, ICMEN 2017
|
2016 |
Statistical optimization of gelatin immobilization to improve PCL microcarrier surface.
In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
|
2016 |
Vero cell culture on magnesium doped biphasic calcium phosphate scaffolds.
In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
|
2015 |
Modification of Polycaprolactone microspheres surface by ultra violet/ozone treatment to improve its hydrophilicity.
In: 1st UMM International Conference on Pure and Applied Research (UMM-ICoPAR)
|
2015 |
Fabrication and characterization of poly (ethylene oxide) for photo-electronic devices.
In: International Postgraduate Conference on Engineering Research (IPCER) 2015
|
2014 |
Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies .
In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014)
|
2013 |
Preparation and characterization of polycaprolactone (PCL) microspheres for cell culture applications.
In: 3rd International Conference on Biotechnology (ICBioE'13)
|
2013 |
Studies on the process condition that affect the size of polystyrene microcarrier by an emulsion solvent evaporation process.
In: 3rd International Conference on Biotechnology Engineering (ICBIoE 2013
|
2013 |
Natural photosensitizers for dye sensitized solar cells.
In: European conference and workshop on Renewable Energy Systems (EWRES)
|
2013 |
Development of polystyrene microcarrier by an emulsion solvent evaporation process.
In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013
|
2013 |
Fabrication of gelatin coated polycaprolactone (PCL) microspheres for cell culture application.
In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013
|
2012 |
Characterization of forsterite bioceramics.
In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2012
|
2012 |
Mechanical and electrical properties of Y-TZP/ZrB2 composite.
In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2012
|
2012 |
Kinetics of cadmium adsorption by CNTs grown on PACs.
In: International Conference on Nanotechnology, ICONT 2012
|
2011 |
Various Carbon Nanomaterials (CNMs) synthesized on powdered activated carbon by CVD reactor.
In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
|
2011 |
Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite powder.
In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011
|
2010 |
Optimization of synthesis of carbon nanotubes on iron impregnated activated carbon.
In: 24th Symposium of Malaysian Chemical Engineers (SOMChE 2010) and 1st International Conference on Process Engineering and Advanced Materials 2010 (ICPEAM2010).
|
2010 |
Lightweight biodegradable cotton/albumen board (CAB) for sustainable environment.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
2010 |
Synthesis of TiO2 nanosized powder photocatalyst via soft-gel method for bacteria inactivation application.
In: 19th Scientific Conference of Electron Microscopy Society of Malaysia (EMSM)
|
2010 |
Floating porous ceramics for high densiti cell culture in stirred bioreactors.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
2009 |
Artificial bone as an alternative solution for halal bone implants.
In: World Halal Research Summit 2009
|
2009 |
Fabrication of ceramic membrane chromatography for biologics purification.
In: Advanced materials and Processing Technologies
|
2009 |
Fabrication system for surface modification of polystyrene beads by UV/Ozone treatment and its characterization.
In: Advances in Materials and Processing Technologies
|
2009 |
Sintering behavior of hydroxyapatite ceramics prepared by different routes .
In: 33rd International Conference & Exposition on Advanced Ceramics and Composites 2009
|
2008 |
Development of magnesium-doped biphasic calcium phosphate through sol-gel method.
In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008
|
Book Section |
2011 |
Synthesis and characterization of sol-gel method derived zinc doped hydroxyapatite powder.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.161-166
|
2011 |
Effect of dispersant on protein foaming-consolidation porous alumina containing hydrothermal derived hydroxyapatite nanopowder.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.103-108
|
2011 |
Effect of yolk addition on protein foaming-consolidation porous alumina-calcium phosphate composite.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.109-114
|
2011 |
Investigation of the effect of starch addition on protein foaming-consolidation porous alumina containing hydroxyapatite nanopowder.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.115-119
|
2011 |
The influence of hydroxyapatite loading on protein foaming-consolidation porous alumina sintered at 1300°C
.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.120-125
|
2011 |
Porous alumina-hydroxyapatite composites via protein foaming-consolidation method: effect of HA loading on physical properties
.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.132-136
|
2011 |
Effect of milling time on mechanochemically synthesized nanohydroxyapatite bioceramics.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.149-154
|
2011 |
Morphological analysis of mechanochemically synthesized nanohydroxyapatite bioceramics.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.155-159
|
2011 |
Sodium doped nanohydroxyapatite bioceramics through mechanochemical synthesis.
In: Advances in materials engineering
IIUM Press
. ISBN 9789674181673
, pp.160-164
|
2011 |
Effect of sintering temperature on protein foaming-consolidation porous alumina-tricalcium phosphate composites.
In: Advances in materials engineering - volume 2
IIUM Press
. ISBN 9789674181680
, pp.43-48
|
2011 |
UV/ozone treatment system for polystyrene beads modification.
In: Recent Development of Microcarrier for Cell Culture Engineering
IIUM Press
. ISBN 9789674180096
, pp.1-10
|
2011 |
The effect of hydroxyapatite addition on biocompatibility of porous alumina microcarriers for vero cell culture
.
In: Recent Development of Microcarrier for Cell Culture Engineering
IIUM Press
. ISBN 9789674180096
, pp.33-42
|
2011 |
Biocompatibility of porous hydroxyapatite microcarrier for vero cell culture application
.
In: Recent Development of Microcarrier for Cell Culture Engineering
IIUM Press
. ISBN 9789674180096
, pp.43-50
|
2011 |
Evaluation on biological performance of porous pure and magnesium-doped biphasic calcium phosphate ceramics
using vero cell culture
.
In: Recent Development of Microcarrier for Cell Culture Engineering
IIUM Press
. ISBN 9789674180096
, pp.51-59
|
2011 |
The vero cells growth in different type of microcarriers.
In: Recent Development of microcarrier for Cell Culture Engineering
IIUM Press
. ISBN 9789674180096
, pp.85-95
|
2011 |
The use of scanning electron microscope in evaluating insulation property.
In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08
IIUM Press
. ISBN 9789670225685
, pp.180-186
|
2011 |
Cell attachment study of chicken fibroblast cell (DF-1) using Ceramic microcarrier granule in bioreactors
.
In: Recent Development oF Microcarier for Cell Culture Engineering
IIUM Press
. ISBN 9789674180096
, pp.131-140
|
2011 |
A maximum power point tracking for Photovoltaic system using temperature compensator method.
In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08
IIUM Press
. ISBN 9789670225685
, pp.187-193
|
2011 |
Selection of materials and design specification for hip oint prosthesis.
In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08
IIUM Press
. ISBN 9789670225685
, pp.386-393
|
2011 |
Manganese doped hydroxyapatite powder through hydrothermal method.
In: Advances in composite materials
IIUM Press
. ISBN 9789674182311
, pp.155-160
|
2011 |
Production of porous calcium phosphate ceramics through polymeric sponge method.
In: Advances in Materials Engineering - Volume 2
IIUM Press
. ISBN 9789674181680
, pp.120-125
|
2011 |
Silicone doped calcium phosphate powder synthesized via hydrothermal method.
In: Advances in Materials Engineering - Volume 2
IIUM Press
. ISBN 9789674181680
, pp.126-131
|
2010 |
Magnesium-doped biphasic calcium phosphate nanopowders via sol-gel method .
In: The Sol-Gel Process : Uniformity, Polymers and Applications
Nova Science Publishers, Inc
. ISBN 978-1-61761-621-1
|
2010 |
Magnesium-doped biphasic calcium phosphate nanopowders via sol-gel method .
In: The Sol-Gel Process : Uniformity, Polymers and Applications
Nova Science Publishers, Inc
. ISBN 978-1-61761-621-1
|