Staff Directory


Moumen Mohammed Mahmoud Idres

Academic Qualification

  • Ph.D in Aerospace Engineering - Doctor of Philosophy, Old Dominon University
  • Master in Aerospace Engineering - Masters Degree, Cairo University, Egypt
  • Bachelor of Science in Aerospace Engineering - Bachelor Degree, University of Cairo

Moumen Mohammed Mahmoud Idres (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


midres@iium.edu.my
4550


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Mechanical Control
  • Engineering Tech ~ Applied Sciences And Technologies ~ Aerospace ~ Aerospace Manufacturing (Including Manufacturing of Transportation Component for Defence and Security System e.g Rotary and Fixed Wing and Instrumentation Manufacturing such as On-Board Computer for Satellites)


Teaching Responsibilities


AEROSPACE ENGINEERING LAB 1 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011
AEROSPACE ENGINEERING LAB IV 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
AEROSPACE PROPULSION 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
AEROSPACE VEHICLE DESIGN 2015/2016
AUTOMOTIVE ENGINEERING LAB II 2013/2014 2011/2012
COMPUTATIONAL FLUID DYNAMICS 2017/2018 2014/2015
FLIGHT MECHANICS 2023/2024 2022/2023 2008/2009
FLUID MECHANICS 2008/2009
LAUNCH VEHICLE TECHNOLOGY 2012/2013 2011/2012
MECHANICS OF MATERIALS 2008/2009
OIL AND GAS INDUSTRIES 2023/2024
PRINCIPLES OF FLIGHT 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
PROJECT I 2023/2024 2022/2023 2021/2022 2020/2021 2018/2019 2010/2011 2009/2010
PROJECT II 2023/2024 2019/2020 2018/2019 2010/2011 2009/2010
PROPULSION SYSTEM 2013/2014
RENEWABLE ENERGY 2017/2018 2014/2015 2012/2013
ROTORCRAFT AERODYNAMICS 2013/2014
SPECIAL TOPICS IN MECHANICAL ENGINEERING 2011/2012
THERMOFLUID ENGINEERING 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009


Supervision


Parametric Study Of Child Restraint System In Side Impact Crash.
Ph.D Completed 2015 Co-supervisor
Optimization Of Vehicle Front And Geometry For Adult And Child Pedestrian Protection.
Ph.D Completed 2015 Co-supervisor
Analytical Modelling Of Fuel Consumption And Regulated Exhaust Emission Rates For Trucks.
Ph.D Completed 2014 Co-supervisor
Flow Analysis Of Thermoelectrically Controlled Mems - Based Micronozzle.
Ph.D Completed 2012 Co-supervisor
Analysis And Assessment Of A Small Capacity Horizontal Axis Wind Turbine: Comoros Island Case Study.
Master Completed 2020 Co-supervisor
Dynamics And Control Of Mini Aerial Vehicle Using Model Predictive Control.
Master Completed 2019 Co-supervisor
Parametric Optimization Of A Hybrid Electric Vehicle .
Master Completed 2017 Main Supervisor
Modeling, Control And Navigation Of A Quadrotor.
Master Completed 2017 Main Supervisor
Model Predictive Control For Proton Exchange Membrane Fuel Cell.
Master Completed 2014 Main Supervisor
Theoretical And Experimental Analysis Of Flutter-Based Wind Microgenerator.
Master Completed 2014 Co-supervisor
Performance Evaluation Of Pvm With Water Filters And Infrared Reflective Glass Covers.
Master Completed 2014 Co-supervisor
Enhancement Of Regression Rate In Hybrid Rocket Motor Using Various Techniques.
Master Completed 2014 Co-supervisor
Optimization Of Micro Air-Launch Vehicle For Micro And Nano Satellite.
Master Completed 2013 Co-supervisor


Research Projects


Completed
2014 - 2016 Low Earth Orbit for Remote Sensing Application
2014 - 2016 Design and Implementation of a Position and Speed Controller Based on Neuro-Fuzzy Approach
2013 - 2014 Guidance, Navigation and Control for Autonomous In-Orbit Assembly of Multiple Spacecraft
2012 - 2015 Investigation of Flow-Induced Pulsation in Piping Networks of Gas Transportation Systems
2012 - 2014 Design Optimization of a Low-Cost Air-Launch system for Nano and Pico Satellites
2011 - 2014 Theoretical and Experimental Analysis of Non-turbine Micro Wind Energy Harvesting
2011 - 2014 RU 2011: Proton Exchange Membrane (PEM) Fuel Cell Control Using Model Predictive Technique
2010 - 2011 Development of a Multiphysics Model for Thermoelectricity Controlled MEMS-based Microthrusters.
2010 - 2011 Preliminary Analysis of Micro Energy Conversion System (MWECS)
2009 - 2011 Analysis of Stability and Control Strategies for an Autonomous Unmanned Aerial Vehicle (UAV)
2009 - 2011 Analysis and Modelling of Proton Exchange Membrane (PEM) Fuel Cell System
On-Going
2015 - Present Parametric Optimization of a Parallel Hybrid Electric Vehicle Powertrain with a Battery-Supercapacitor Energy Storage System


Publications


Article

2022 Computational prediction of the performance map of a transonic axial flow compressor. CFD letters, 14 (3) pp. 11-21
2021 A review of HVAC system optimization and its effects on saving total energy utilization of a building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, () pp.
2021 Energy efficiency and optimization of buildings for sustainable development in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, () pp.
2021 Model predictive control for regulating fuel cell stack temperature and air flow rate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, () pp.
2021 Optimization of fuel economy for a multimode plug-in hybrid electric vehicle using Atkinson thermodynamic cycle engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, () pp.
2021 Optimization of fuel economy for a multimode plug-in hybrid electric vehicle using Atkinson thermodynamic cycle engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2) pp. 148-159
2019 Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 44-47
2019 Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 153-157
2019 Satellite attitude tracking control using Lyapunov control theory. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 253-257
2018 Trajectory tracking of quaternion based quadrotor using model predictive control. International Journal of Engineering and Technology (UAE), 7 (4.13) pp. 125-128
2017 Investigation of Malaysian low earth orbits for remote sensing applications. IOP Conference Series: Materials Science and Engineering, 184 (012009) pp. 012009-1
2016 A parametric study of neck moment response in a 3 year old child subjected to oblique side impact.. ARPN Journal of Engineering and Applied Sciences, 11 (8) pp. 5126-5133
2016 Development and optimization of passenger car front profile using polynomial response surface method. ARPN Journal of Engineering and Applied Sciences, 11 (8) pp. 5161-5166
2015 Computational analysis of air intake system for internal combustion engine in presence of acoustic resonator. ARPN Journal of Engineering and Applied Sciences, 10 (22) pp. 9468-9475
2015 Design, fabrication and flight testing of a surveillance UAV. Advanced Materials Research, 1115 () pp. 450-453
2015 Evaluation of Orifice Flow Meter Accuracy under Pulsation Conditions. Advanced Materials Research, 1115 () pp. 472-475
2015 Modeling and analysis of flutter-based thin-film cantilever microgenerator. ARPN Journal of Engineering and Applied Sciences, 10 (21) pp. 9688-9697
2015 Numerical simulation and validation of high-speed turbulent and chemically-reacting flows. International Journal of Engineering Systems Modelling and Simulation, 7 (2) pp. 111-124
2015 Numerical simulation of supersonic and turbulent combustion with trans-verse sonic fuel injection. International Journal of Engineering Systems Modelling and Simulation, 7 (2) pp. 35-61
2015 Power management controller for hybrid electric vehicle using fuzzy logic. ARPN Journal of Engineering and Applied Sciences, 10 (21) pp. 9682-9687
2015 Vehicle profile optimization using central composite design for pedestrian injury mitigation. Applied Mathematics & Information Sciences, 9 (1) pp. 197-204
2014 Constrained model predictive control for proton exchange membrane fuel cell. Journal of Mechanical Science and Technology, 28 (9) pp. 3855-3862
2014 Development of economical vehicle model for pedestrian-friendly front-end profile study. International Journal of Simulation Modelling, 13 (4) pp. 419-432
2014 Effect of varying design options on the transient behavior of a hybrid rocket motor. Journal of Aerospace Technology and Management, 6 (1) pp. 69-82
2014 Fuel cell starvation control using model Predictive technique with laguerre and exponential weight functions. Journal of Mechanical Science and Technology, 28 (5) pp. 1995-2002
2014 Head injury mitigation of an adult and child pedestrian in a frontal vehicle impact using response surface methodology. Applied Mechanics and Materials, 575 () pp. 952-955
2014 Injury analysis validation of a deformable vehicle front end model. Applied Mechanics and Materials, 465-66 () pp. 1334-1338
2014 Lateral side impact crash simulation of restrained 3 year old child. Applied Mechanics and Materials, 663 () pp. 590-595
2014 Neck moment characterization of restrained child occupant at realistic nontest standard higher impact speed of 32.2 km/h. International Journal of Vehicular Technology, 2014 () pp. 1-8
2014 Neck moment response characterization of restrained child occupant at standard test impact speed 24.4 km/h. Research Journal of Applied Sciences, Engineering and Technology, 8 (1) pp. 113-119
2014 Optimisation of vehicle front-end geometry for adult and pediatric pedestrian protection. International Journal of Crashworthiness, () pp. 1-9
2014 Parameter study of neck force in restrained 3 year old child involved in vehicle side impact. Australian Journal of Basic and Applied Sciences, 8 (9) pp. 145-154
2014 Parametric study for head injury criteria response of three-year olds in a child restraint system in oblique and lateral intrusive side impact. International Journal of Crashworthiness, 2014 () pp. 1-11
2014 Validation of pedestrian impactor testing upon hybrid vehicle front end profile. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4) pp. 342-351
2013 Crash kinematics and injury criteria validation for a deformable hybrid vehicle model. Applied Mechanics and Materials, 663 () pp. 627-631
2013 Injury analysis validation of a deformable vehicle. Applied Mechanics and Materials, 465/66 () pp. 1334-1338
2013 Two-dimensional flow properties of micronozzle under varied isothermal wall conditions . International Journal of Engineering Systems Modelling and Simulation, 5 (4) pp. 174-180
2012 Design optimization of Micro Air Launch Vehicle using differential evolution. Journal of Aerospace Technology and Management, 4 (2) pp. 185-196
2012 One-dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-based thermoelectrically controlled micronozzle. International Journal of Engineering Systems Modelling and Simulation, 4 (4) pp. 163-168
2011 Air supply system transient model for proton exchange membrane fuel cell . International Journal of Vehicle systems Modelling and Testing, 6 (3/4) pp. 396-407
2011 Particle swarm optimization of micro air launch vehicle trajectory. Canadian Aeronautics and Space Journal, 57 (2) pp. 115-120
2011 Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4) pp. 318-392
Conference or Workshop Item

2022 Monitoring the IIUM river using unmanned aerial vehicle and image classification. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2021 Computational prediction of the performance map of a transonic axial flow compressor. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21),
2021 Computational prediction of the performance map of a transonic axial flow compressor. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21),
2021 Optimization of fuel economy for a multimode plug-in hybrid electric vehicle. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21),
2021 Optimization of fuel economy for a multimode plug-in hybrid electric vehicle. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21),
2019 Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18),
2018 Satellite attitude tracking control using thrusters and momentum wheels. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18),
2018 Transient flow in a compressor blade row for a periodic vibration motion. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2017 Design optimization of a hybrid electric vehicle powertrain. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016,
2017 Dynamics and control of quadcopter using linear model predictive control approach. In: 1st AEROS Conference 2017,
2017 Numerical investigation of magnetic nanoparticles trajectories for magnetic drug targeting. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Quadrotor trajectory tracking using PID cascade control. In: AEROS Conference 2017,
2017 Trajectory tracking in quadrotor platform by using PD controller and LQR control approach. In: 6th International Conference on Mechatronics (ICOM'17),
2014 Development and optimization of a vehicle front-end geometry model for improved pedestrian safety. In: International Conference on Automotive and Vehicle Technologies (AVTECH '14),
2014 Improving the efficiency of poly-crystalline photovoltaic module using special transparent glass covers . In: International Meeting on Advances in Thermofluids,
2014 Orifice plate flowmeter performance under pulsating flow conditions. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013,
2014 Response surface approach for sensitivity study of neck forces in restrained child occupant during side-impact crash. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014,
2013 Black box nonlinear model predictive control using recurrent neural network. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2013 Effectiveness of wheel-typed grain design for hybrid rocket motor performance. In: Recent Advances in Energy, Environment and Development Conference,
2013 Experimental investigation of the performance of flutter-based microgenerators. In: 11TH INTERNATIONAL ENERGY CONVERSION ENGINEERING CONFERENCE,
2013 Frequency estimation of flow induced vibration in thin cantilever plate. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2013 Hybrid rocket performance with varying additive concentrations. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference,
2013 Simulation of wheel type fuel grain in hybrid rocket motor. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2013 Three-dimensional vibration analysis of fluid-filled pipes. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013),
2012 Development of generic algorithm in wheel-typed hybrid rocket grain design for performance estimation. In: Advances in Environment, Computational Chemistry and Bioscience,
2011 Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 On the scaling of air launch vehicles. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 One dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-Based thermoelectrically controlled micronozzle. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11,
2011 Particle swarm optimization of air-launch vehicle and trajectory. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11,
2010 Dynamic thermal model for proton-exchange membrane fuel cell. In: International Conference on Sustainable mobility 2010,
Book

2013 Towards a numerical simulation of supersonic mixing & combustion. LAP Lambert Academic Publishing, ISBN: 9783659387043
Book Section

2011 Compressor models. In: IIUM Press, ISBN: 9789674181451, pp. 34-39
2011 Design of an autopilot for an autonomous unmanned aerial vehicle. In: IIUM Press, ISBN: 9789670225685, pp. 59-68
2011 Introduction to compressors. In: IIUM Press, ISBN: 9789674181451, pp. 4-8
2011 Modeling of compression systems. In: IIUM Press, ISBN: 9789674181451, pp. 27-33
2011 Rotating stall and surge. In: IIUM Press, ISBN: 9789674181451, pp. 20-26
2011 Surge and rotating stall. In: IIUM Press, ISBN: 9789674181451, pp. 40-47
2011 Three-dimensional analysis of compressors. In: IIUM Press, ISBN: 9789674181451, pp. 15-19
2011 Two-dimensional analysis of compressors. In: IIUM Press, ISBN: 9789674181451, pp. 9-14
2011 Unstructured finite volume for two-dimensional navier stokes equations. . In: IIUM Press, ISBN: 978-967-418-020-1, pp. 43-98
Monograph

2018 DYNAMICS AND CONTROL OF MINI AERIAL VEHICLE USING MODEL PREDICTIVE CONTROL. In: IIUM,