Staff Directory
Academic Qualification
- Engineering (Computer/Telecommunication) - Doctor of Philosophy, International Islamic University Malaysia
- - Bachelor Degree, Engineering Academy Tajoura
Belal Ahmed Hamida (Assoc. Prof. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
belal@iium.edu.my
4435
Expert Profile
As a Ph.D student Dr. Belal did experimental work in the University of Malaya (UM) from August 2010 to December 2012 with Professor Dr. Harith Ahmed (Field Supervisor) and Professor Dr. Sulaiman Harun.
He also worked as a research assistant from July 2009 until February 2013 doing his Ph.D period for Fundamental Research Grant Scheme (FRGS) under the title "Modeling Development and Characterization of Dual Function Wide-band EDFA". Furthermore, during his studies, he proposed a new amplifier to enhance wide-band Erbium doped fiber amplifier using high concentration active medium, and he has published many papers on this proposal.
Currently, he is an Assistant Professor at the Department of Electrical and Computer Engineering (ECE).
He also worked as a research assistant from July 2009 until February 2013 doing his Ph.D period for Fundamental Research Grant Scheme (FRGS) under the title "Modeling Development and Characterization of Dual Function Wide-band EDFA". Furthermore, during his studies, he proposed a new amplifier to enhance wide-band Erbium doped fiber amplifier using high concentration active medium, and he has published many papers on this proposal.
Currently, he is an Assistant Professor at the Department of Electrical and Computer Engineering (ECE).
Professional Membership
- 2009: Member of Profesional Body / Association: (Member of Libyan Engineering Society), IIUM Properties
- 2014: Member of Profesional Body / Association: (Membership of Institute of Electrical and Electronics Engineers ( IEEE) (ID: 9067719)), Institute of Electrical and Electronics Engineers (IEEE)
- 2014: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
- 2015: Member of Profesional Body / Association: (Member, Institute of Electrical and Electronics Engineering (IEEE)), Institute of Electrical and Electronics Engineers (IEEE)
- 2016: Member of Profesional Body / Association: (Membership of Institution of Engineering and Technology (IET) (ID: 1100596831)), Institute of Electrical and Electronics Engineers (IEEE)
- 2018: Member of Profesional Body / Association: (Board of Engineering Malaysia - Member (1818-040000-G2-0510A)), board of engineering Malaysia
- 2018: Member of Profesional Body / Association: (International Society for Optical and Photonics (SPIE)), IIUM Properties
- 2020: Member of Profesional Body / Association: (American Journal of Optics and Photonics), IIUM Properties
Teaching Responsibilities
CIRCUIT ANALYSIS | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 |
ELECTRICAL ENGINEERING LAB | 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 |
ELECTRICAL ENGINEERING LAB 1 | 2023/2024 2022/2023 2021/2022 |
ELECTRONICS | 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 |
ENGINEERING LAB II | 2016/2017 2015/2016 2014/2015 |
FINAL YEAR PROJECT 1 | 2019/2020 |
FINAL YEAR PROJECT I | 2019/2020 |
FINAL YEAR PROJECT II | 2023/2024 2022/2023 2020/2021 |
FUNDAMENTALS OF ELECTRICAL AND ELECTRONIC | 2023/2024 2022/2023 |
OPTICAL COMMUNICATIONS | 2017/2018 |
PROGRAMMING FOR ENGINEERS | 2017/2018 2016/2017 2015/2016 |
PROJECT I | 2018/2019 |
PROJECT II | 2020/2021 |
Supervision
Optimization Of Selective Harmonic Elimination Technique For Cascaded Multilevel Inverter.
Ph.D
Completed
2020
Co-supervisor
|
Photoacoustic Measurement Of Heart Rate, Oxygen Saturation, Temperature, Glucose Levels And Their Relation To Covid-19 And Diabetes.
Master
Completed
2023
Co-supervisor
|
Analysis Of Peak Hours Renewable Energy Demand In Kuwait.
Master
Completed
2022
Co-supervisor
|
Design Characterization Of Large Mode Area Ytterbium Doped Fiber Laser.
Master
Completed
2021
Main Supervisor
|
Passively Q-Switching Erbium-Doped Fiber Laser Using Lutetium Oxide As Saturable Absorber.
Master
Completed
2020
Main Supervisor
|
Passively Q-Switching Erbium Doped Fiber Laser Using Graphene And Bismuth Telluride As Saturable Absorber.
Master
Completed
2019
Main Supervisor
|
Flat Gain Fiber Amplifier By Using Hafnium Bismuth Erbium Doped Fiber.
Master
Completed
2018
Main Supervisor
|
Design Of Optical Sensor For Water Level Detection Based On Fresnel Reflection.
Master
Completed
2018
Co-supervisor
|
Graphene Oxide (Go) As Saturable Absorber Q-Switching And Mode-Locking Fiber Laser.
Master
Completed
2017
Main Supervisor
|
Generation Of Pulsed Erbium-Doped Fiber Laser Using 2d Materials As Saturable Absorber.
Master
Completed
2017
Main Supervisor
|
Generation Of Q-Switched Fiber Laser Using Edfl As Gain Medium And Bp As Saturable Absorber.
Master
Completed
2017
Main Supervisor
|
Development Of A Microfiber Optical Sensor For Humidity Monitoring.
Master
Completed
2016
Main Supervisor
|
Research Projects
Completed
2021 - 2023 | Solid State Lighting: World of Colors for Humanity |
2016 - 2019 | Modelling and Optimisation of Stepped Waveform Generation for Multilevel Inverters Topology Applications |
2016 - 2019 | Development, Testing and Field Evaluation pf Physical Intrusion Detection Alarm-cum-Office/Home Automation System Utilizing Radio Frequency Signals Energy for Indoor Environment Use |
2015 - 2019 | Proposing with Analysis a Multi-Level Inverter Using Optimized Pulse-Width-Modulation Approach with Reduced Harmonics and Switching Losses |
2015 - 2017 | Optimizing Dual-Loop Optical Microfiber Sensor Structure for Humidity Monitoring |