Staff Details

Ahsan Ali Khan

Ahsan Ali Khan
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 4473
Email address: aakhan@iium.edu.my

Academic Qualification

  • Master of Science in Mechanical Engineering - Masters Degree , Peoples' Friendship University
  • PhD in Technical Sciences - Doctor of Philosophy , Moscow Machine Tool Institute

Area of Specialisation

  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Cutting Tool Technology - Manufacturing Processes, Metal Cutting, Electrical Discharge Machining, Water Jet Machining, Production Tooling.
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining)
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Other Industrial and Manufacturing Engineering n.e.c.
  • Engineering Tech ~ Applied Sciences And Technologies ~ Process Technology ~ Material Processing Technology

Professional Membership

  • 2017
  • 2016 Springer
  • 2016 Springer
  • 2016 World Academic Publishing
  • 2015 The World Academic Publishing Co., Ltd

Teaching Responsibilities

COMPUTER AIDED DRAFTING 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006
DESIGN FOR MANUFACTURING 2015/2016
DESIGN FOR MANUFACTURING 2005/2006 2004/2005 2003/2004 2002/2003 2001/2002 2000/2001
DESIGN FOR MANUFACTURING 2015/2016 2014/2015 2005/2006 2004/2005 2003/2004 2002/2003 2000/2001
ENGINEERING DRAWING 2016/2017 2015/2016
ENGINEERING DRAWING 2003/2004 2002/2003 2001/2002 1999/2000
ENGINEERING DRAWING 2010/2011
ENGINEERING DRAWING 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011
ENGINEERING DRAWING I 1998/1999
INTRODUCTION TO MANUFACTURING PROCESSES 2005/2006 2004/2005 2003/2004
INTRODUCTION TO MANUFACTURING PROCESSES (LAB) 2004/2005
MANUFACTURING ENGINEERING LAB II 2006/2007
MANUFACTURING PROCESS II 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 2003/2004 2002/2003 2001/2002 2000/2001
MANUFACTURING PROCESS II (LAB) 2004/2005 2003/2004
MANUFACTURING PROCESSES 2007/2008 2006/2007 2005/2006 2003/2004 2002/2003
MANUFACTURING PROCESSES 2009/2010 2007/2008 2006/2007
MANUFACTURING PROCESSES 2009/2010
MANUFACTURING PROCESSES II 2016/2017
MANUFACTURING PROCESSES II 2000/2001 1999/2000 1998/1999
MANUFACTURING PROCESSES II 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
MANUFACTURING PROCESSES II 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008 2006/2007
METROLOGY & MEASUREMENT SYSTEMS 2003/2004 2001/2002
NON-TRADITIONAL MACHINING PROCESSES 2012/2013 2011/2012 2008/2009 2007/2008 2006/2007 1999/2000
NONTRADITIONAL MANUFACTURING SYSTEMS 1998/1999
PRODUCT DESIGN AND DEVELOPMENT 2016/2017 2015/2016
PRODUCTION PLANNING & CONTROL 2003/2004 2001/2002
PRODUCTION PLANNING & CONTROL 2001/2002
PRODUCTION TOOLING 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 2003/2004 2002/2003
PRODUCTION TOOLING 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
PROJECT I 2005/2006 2004/2005 2003/2004
PROJECT I 2005/2006 2004/2005 2003/2004 2002/2003 2001/2002
PROJECT I 2003/2004 2002/2003
PROJECT I 2002/2003 2001/2002 2000/2001 1999/2000
PROJECT II 2005/2006 2004/2005 2003/2004
PROJECT II 2005/2006 2004/2005 2003/2004 2002/2003
PROJECT II 2002/2003
PROJECT II 2002/2003 2001/2002 2000/2001 1999/2000
SEMINAR 2000/2001
SEMINAR 2000/2001
SEMINAR 2000/2001
SEMINAR 2000/2001
SEMINARS 2000/2001
WORKSHOP TECHNOLOGY 2004/2005 2001/2002 2000/2001

Research Projects

Completed

2013 - 2016
Enhancement of Surface Wear Characteristics of Titanium Alloy (Ti-6A1-4V) Using Electrical Discharge Machining (EDM)
2012 - 2014
Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid
2012 - 2016
Modelling of Vibration and System Parameters for Stability in Micro End Milling: A Noble Approach
2011 - 2013
Electro-Discharge Machining of Nonconductive Ceramic Materials
2011 - 2012
Surface Modification of Work Material Using Powder Metallurgey (P/M) Compacted Electrodes During Electric Discharge Machining (EDM)
2009 - 2011
Influence of Proses parameters on Materials removal rate,Electrode wear and surface Integrity during EDM Miling.
2008 - 2010
Improving the Performance of Electrical Discharge Machining (EDM) in Machining Titanium Alloys by Using Cryogenic Cooling of Electrode
2008 - 2010
Influence of EDM Process Parameters on Surface Integrity of Machined Parts.
2007 - 2009
Effect of Electrode Configuration on Electrode Wear during Electrical Discharge Machining (EDM)
2007 - 2011
Design and Fabrication of a Typical Hip-bone Joint and Analysis of its Load Bearing Capacity
2007 - 2009
Development of Micro-End Milling Process for Fabricating MEMS
2007 - 2011
Noble Tool Based Micromilling for Nanometric Surface Finish
2006 - 2008
Effect of Magnesium Addition on Structure and Properties of As-Cast and Heat-Treated Aluminium-Silicon Alloy
2006 - 2008
Pin Type Clamping Mechanism for Setup-Free Machining Process
2006 - 2007
Effect of Cryogenic Grinding on Surface Quality of Mild Steel and Stainless Steel
2006 - 2010
Precise Micromachining with Electrical Discharge Machining (EDM) for Malaysian Industries
2006 - 2009
Stability Analysis of Pin Type Reconfiguration Fixture for Setup Free Machining Attachment
2006 - 2010
Formation of Surface Layer Coatings through Powder Preplacement and TIG Torch Melting Processes
2005 - 2008
Fabrication of Microcomponents by Micro Hot Embossing

In Progress

2016 - Present
Improving Machining Performance during Electrical Discharge Machining (EDM) of Stainless Steel with Powder added Dielectric Fluid
2015 - Present
Precision Control of KERF in Micro Wire Electro Discharge Machining with Dry Dielectric Fluid
2014 - Present
Design and Development of a Green Supply Chain Model for Deployment in Industrial Environment to Mitigate Carbon Foot-Print
2014 - Present
Noble Approach to Control Vibration using Minimum Quantity Lubrication (MQL) in Micro Milling
2009 - Present
Advanced Materials and Surface Engineering (AMSERU)
2007 - Present
Agile and Sustainable Manufacturing Research Unit (ASMARU)

Award and Recognitions

09-12-1987
Production Engineering Gold Medal for 1987-88 . Institution of Engineers (India) - International level.
02-12-2012
Silver Medal . IRIIE, IIUM - University level.
02-12-2011
Siver Medal . IRIIE, IIUM - University level.
02-12-2011
Silver Medal . IRIIE, IIUM - University level.
05-12-2002
Excellent Teachers Award . IIUM - University level.

Publications

Article

2017
Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). IOP Conf. Series: Materials Science and Engineering , 184
2017
Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering , 184 pp.1-5.
2017
Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). IOP Conf. Series: Materials Science and Engineering , 184
2017
Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering , 184
2017
Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering , 9 (1). pp.39-43.
2017
Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. IOP Conference Series: Materials Science and Engineering , 184 pp.1-7.
2017
Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. IOP Conference Series: Materials Science and Engineering , 184 pp.1-5.
2017
Adoption of JMM practices – A key to performance improvement of a local automotive industry. IOP Conf. Series: Materials Science and Engineering , 184
2017
Design and development of hybrid energy generator (photovoltaics) with solar tracker. IOP Conference Series: Materials Science and Engineering , 184 pp.1-6.
2015
Surface quality produced in EDM with tungsten carbide and copper compacted electrodes. Advanced Materials Research , 1115 pp.24-28.
2015
Analyzing the influence of electrical parameters on EDM process of Ti6Al4V alloy using Adaptive Neuro-fuzzy Inference System (ANFIS). International Review of Mechanical Engineering , 9 (3). pp.237-241.
2015
The effects of sliding parameters on dry wear characteristics of Ti-6Al-4V alloy. Advanced Materials Research , 1115 pp.213-216.
2015
Effect of powder concentration on EDM performance during machining mild steel. Advanced Materials Research , 1115 pp.7-11.
2014
Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science pp.1-7.
2013
Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp.73-78.
2013
Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method. International Review of Mechanical Engineering , 7 (7). pp.1464-1470.
2013
Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy. Journal of Engineering Manufacture , 227 (9). pp.1310-1316.
2013
Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 227 (3). pp.460-464.
2013
Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic . Procedia Engineering , 56 pp.696-701.
2013
Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering , 53 pp.1-8.
2012
Development of a new model for predicting EDM properties of Cu-TaC compact electrodes based on artificial neural network method. Australian Journal of Basic and Applied Sciences , 6 (13). pp.192-199.
2012
Influence of thermal conductivity cf electrodes on EDM process parameters. Australian Journal of Basic and Applied Sciences , 6 (9). pp.337-345.
2012
Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. Advanced Materials Research , 576 pp.72-75.
2012
Formation of nitrides and carbides on titanium alloy surface through EDM. Advanced Materials Research , 576 pp.7-10.
2012
Determination of influential factors on EDMed surface properties using Plackett-Burman design. World Applied Sciences Journal (WASJ) , 21 (spec ). pp.88-93.
2012
Surface modification by EDM using Co-Cr sintered powder metallurgy electrode. Advanced Materials Research , 576 pp.56-59.
2012
Prediction of minimum chip thickness in tool based micro end milling. International Journal of Integrated Engineering , 4 (1). pp.6-10.
2011
Effect of machining parameters on surface roughness during wet and dry Wire-EDM of stainless steel. Journal of Applied Sciences pp.1-5.
2011
Design and development of Acrylic Die for producing wax pattern to gabricate hip bone joint. Journal of Materials Science and Engineering B , 1 pp.184-189.
2011
Investigation on the surface finish, MRR and the surface damage during the EDM of tungsten carbide. Advanced Materials Research , 264-65 pp.1073-1078.
2011
Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons. Advanced Materials Research , 264-65 pp.1933-1938.
2011
Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy . Advanced Materials Research , 264-65 pp.1199-1204.
2011
Experimental investigation of machining parameters on surface roughness in dry and wet wire-electrical discharge machining. Advanced Materials Research , 264/5 pp.831-836.
2011
Surface modification of titanium alloy through electrical discharge machining (EDM). International Journal of Mechanical and Materials Engineering , 6 (3). pp.380-384.
2011
Surface modification using Electric Discharge Machining (EDM) with powder addition. Applied Mechanics and Materials , 110/6 pp.725-733.
2011
Influence of electrode cooling on material migration among the electrodes during edm of titanium alloy. Advanced Materials Research , 264-65 pp.1199-1204.
2011
Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel. Advanced Materials Research , 264-65 pp.1015-1020.
2011
Optimization of process parameters on EDM milling of stainless steel AISI 304. Advanced Materials Research , 264-65 pp.979-984.
2011
Wear characteristics of Fe-C-Si and Fe-C-Al cast irons. Advanced Materials Research , 264-65 pp.1928-1932.
2011
Influence of electrode cooling on recast layers and micro crack in EDM of titanium. Advanced Materials Research , 264-65 pp.1180-1186.
2011
Influence of electrode profiles on electrical discharge machining of titanium. Advanced Materials Research , 264-65 pp.1205-1210.
2011
Development of Powder Metallurgy (PM) compacted Cu-TaC electrodes for EDM. Journal of Mechanics Engineering and Automation , 1 (5). pp.385-391.
2010
Cooling effect on electrode and process parameters in EDM. Materials and Manufacturing Processes , 25 (6). pp.462-466.
2010
A new approach of applying cryogenic coolant in turning AISI 304 stainless steel. International Journal of Mechanical and Materials Engineering (IJMME) , 5 (2). pp.171-174.
2010
Influence of process parameters on electrical discharge machined job surface integrity. American Journal of Engineering and Applied Sciences , 3 (2). pp.396-402.
2010
Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering , 7 (1). pp.81-90.
2010
Modeling and analysis of MRR, EWR and surface roughness in EDM milling through response surface methodology. American Journal of Engineering and Applied Sciences , 3 (4). pp.611-619.
2009
Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B , 23 (6-7). pp.826-831.
2009
Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining. International Journal of Advanced Manufacturing Technology , 45 (11-12). pp.1146-1151.
2009
A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology , 209 (20). pp.6168-6173.
2009
Cryogenic grinding of mild steel and stainless steel . International Journal for manfacturing Science and Production , 10 (1). pp.69-74.
2009
A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering , 4 (1). pp.19-23.
2009
Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite. International Journal of Material Forming , 2 (1). pp.37-44.
2009
Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR. International Journal of Mechanical and Materials Engineering (IJMME) , 4 (3). pp.300-308.
2008
Improving tool life using cryogenic cooling. Journal of Materials Processing Technology , 196 (1-3). pp.149-154.
2008
Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining. Journal of Materials Processing Technology , 198 (1-3). pp.122-128.
2008
The effects of process variables on the hardness of nitrided 3% chromium steel. Journal of Materials Processing Technology , 201 (1-3). pp.325-330.
2008
Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes. The International Journal for Manufacturing Science & Production , 9 (1-2). pp.87-98.
2008
Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes. The International Journal of Advanced Manufacturing Technology , 39 (5-6). pp.482-487.
2008
Investigation on structure and properties of brass casting. Journal of Materials Science & Technology , 24 (3). pp.299-301.
2007
Performance of different abrasive materials during abrasive water jet machining of glass. Journal of Materials Processing Technology , 191 (1-3). pp.404-407.
2006
Capabilities of cermets tools for high speed machining of austenitic stainless steel. Journal of Applied Sciences , 6 (4). pp.779-784.
2006
Relationship of surface roughness with current and voltage during wire EDM. Journal of Applied Sciences , 6 (10). pp.2317-2320.
2005
A study on abrasive water jet machining of aluminum with garnet abrasives. Journal of Applied Sciences , 5 (9). pp.1650-1654.
2005
Surface roughness of Carbides produced by abrasive water jet machining. Journal of Applied Sciences , 5 (10). pp.1757-1761.
1989
Design and manufacture of a ten ton capacity wedge jack. Industrial & Production Engineering Research Bulletin , 4 (1). pp.1-10.

Book Section

2011
Role of heat transfer on process characteristics during electrical discharge machining. In: Developments in Heat Transfer . InTech (Open access book) , pp.417-436. ISBN 978-953-307-569-3.
2011
Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide . InTech , pp.431-452. ISBN 9789533079684.
2011
A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.196-200. ISBN 9789674181628.
2011
An introduction to electrical discharge machining (EDM). In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.65-69. ISBN 9789674181628.
2011
Influence of current, spark on-time and off-time on electrode wear during EDM of mild steel. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.54-58. ISBN 9789674181628.
2011
Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.44-48. ISBN 9789674181628.
2011
Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.33-37. ISBN 9789674181628.
2011
A study on material removal rate during EDM with tantalum carbide-copper compacted electrode. In: Advanced Machining Process . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.18-22. ISBN 9789674181628.
2011
Tool wear rate during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Process . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.2-6. ISBN 9789674181628.
2011
Recent developments in EDM. In: Manufacturing management from basic machining to quality product . IIUM Press , Kuala Lumpur , pp.46-52. ISBN 9789674181659.
2011
Developments in EDM process variables. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.70-75. ISBN 9789674181628.
2011
A comparative study on work surface hardness EDMed by Ta-C powder compacted and copper electrodes. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.59-64. ISBN 9789674181628.
2011
Features of electrode wear during EDM of mild steel with TaC-Cu powder compacted electrodes. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.49-53. ISBN 9789674181628.
2011
Relationship between machining variables and process characteristics during wire EDM. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.28-32. ISBN 9789674181628.
2011
Features of EDM of mild steel with Ta-Cu powder compacted electrodes. In: Advanced Machining Process . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.23-27. ISBN 9789674181628.
2011
Role of current, voltage and spark on-time on electrode material migration during EDM. In: Advanced Machining Process . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.12-17. ISBN 9789674181628.
2011
Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.7-11. ISBN 9789674181628.
2011
Surface roughness of carbides produced by water abrasive jet machining. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.556-561. ISBN 9789670225685.
2009
Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: Proceedings of the Seminar on Research Findings 2008 . IIUM Press , Kuala Lumpur , pp.397-404. ISBN 9789833855780.
2005
Micro Electro Discharge Milling for Microfabrication. In: Micromachining . In-Tech , Croatia , pp.1-28.

Conference or Workshop Item

2017
Adoption of JMM practices – A key to performance improvement of a local automotive industry. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2016
Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015) , Kuala Lumpur
2016
Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015) , Kuala Lumpur
2016
Exploration of EDM assisted CNT in micro machining using statistical approach. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015) , Kuala Lumpur
2016
Optimization of surface quality of mild steel machined by wire EDM using simulated annealing algorithm. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015) , Kuala Lumpur
2013
Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) , Kuala Lumpur, Malaysia
2013
The Effect of EDM with external magnetic field on surface roughness of stainless steel. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) , Kuala Lumpur, Malaysia
2013
Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. In: 5th International Conference on Mechatronics (ICOM'13) , Kuala Lumpur, Malaysia
2013
Simulating the electrical and thermal conductivity in EDM die sinking of Cu-TaC compact electrodes using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013 , Kuching, Sarawak
2012
Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012) , Kuala Lumpur, Malaysia
2012
Determination of influential factors on edmed surface properties using plackett-burman design . In: IIUM Engineering Congress 2012 , Kuala Lumpur, Malaysia
2012
Surface modification by EDM using CO-CR sintered powder metallurgy electrod . In: IIUM Engineering Congress 2012 , Kuala Lumpur, Malaysia
2011
Influence of TaC Powder Additive on electrical discharge machining of stainless Steel. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011) , Batu Pahat, Johor
2011
Development of Powder Metallurgy (PM) compacted Cu-TaC electrode for EDM . In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 ICMAAE '11 , Kuala Lumpur, Malaysia
2011
Performance of PM compacted Cu-TaC electrodes during EDM . In: 2nd International Conference on Mechanical & Manufacturing Engineering 2011, (ICME 2011) , Putrajaya, Malaysia
2011
Surface alloying of Ti-6Al-4V using Cu-TaC composite electrode during electrical discharge machining. In: Regional Tribology Conference 2011 , Langkawi, Malaysia
2011
Surface Modification using Electric Discharge Machining (EDM) with powder addition. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011) , Singapore
2010
Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010 , London
2010
Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel.
2009
Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness . In: Proceedings of the 2009 International Conference on Mechanical and Electrical Technology (ICMET'09) , Beijing
2008
Microengineering education in IIUM: challenges and successes . In: International Conference on MEMS and Nanotechnology, ICMN'08 , Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia
2008
Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008) , Johor Bahru, Malaysia
2008
Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008) , Johor Bahru, Malaysia
2008
Effect of size and shape of electrodes on the performance of EDM. In: 13th International Conference on Applied Mechanics and Mechanical Engineering , Cairo, Egypt
2000
Influence of cutting tool angles on the formation of built-up-edge. In: International Conference on Manufacturing (ICM 2000) , Dhaka