Staff Details

A K M Mohiuddin

A K M Mohiuddin
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 4437
Email address: mohiuddin@iium.edu.my

Academic Qualification

  • Master in Business Administration - Masters Degree , Dhaka University
  • Master of Science (Mechanical Engineering) - Masters Degree , Peoples' Friendship University
  • PhD in Mechanical Engineering - Doctor of Philosophy , Indian Institute of Technology, Kanpur

Area of Specialisation

  • Engineering Tech ~ Engineering And Technology ~ Automotive Engineering ~ Other Automotive Engineering n.e.c. - IC Engines, Exhaust System of Automobiles, Power Train, IC Engine with Electric Motor, Fuel Cells
  • Engineering Tech ~ Engineering And Technology ~ Chemical Engineering ~ Heat/ Mass Transfer Operations - Cooling Towers, Heat Transfer using Nano fluids
  • Engineering Tech ~ Applied Sciences And Technologies ~ Energy Technology ~ Solar Energy Technology - Solar PV and Solar Thermal
  • Economics, Business And Management ~ Economics, Business And Management ~ Management ~ Operational Management - Engineering Management

Professional Membership

  • 2012-2017 Leena & Luna International, Oyama, Japan
  • 2013-2017 Glare Int'l Invention Journals
  • 2013-2017 Science Publishing Group, USA
  • 2003-2017 International Islamic University Malaysia (IIUM)
  • 2014 University Putra Malaysia

Teaching Responsibilities

ADVANCED INTERNAL COMBUSTION ENGINES 2015/2016 2013/2014 2011/2012 2008/2009 2006/2007
ADVANCED INTERNAL COMBUSTION ENGINES 2016/2017
AUTOMOTIVE ENGINEERING LAB II 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2007/2008
AUTOMOTIVE ENGINEERING LAB III 2011/2012
AUTOMOTIVE ENGINEERING LAB IV 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013
AUTOMOTIVE LABORATORY 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005
DECISION SCIENCE 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006 2003/2004 2002/2003
DYNAMICS 2000/2001
ENGINE DESIGN 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
ENGINEERING PROJECT MANAGEMENT 2002/2003
HEAT TRANSFER 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 2003/2004 2002/2003 2001/2002
HEAT TRANSFER 2009/2010 2008/2009 2007/2008
HEAT TRANSFER 2013/2014
INTEGRATED DESIGN PROJECT 2015/2016
INTERNAL COMBUSTION ENGINE 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 2003/2004 2002/2003
INTERNAL COMBUSTION ENGINE (LAB) 2004/2005 2003/2004
INTERNAL COMBUSTION ENGINES 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
INTRODUCTION TO AUTOMOTIVE ENGINEERING 2007/2008 2006/2007 2005/2006 2004/2005 2003/2004 2002/2003 2001/2002
INTRODUCTION TO AUTOMOTIVE ENGINEERING 2007/2008 2006/2007
INTRODUCTION TO AUTOMOTIVE ENGINEERING (LAB) 2004/2005
MANAGEMENT INFORMATION SYSTEMS 2005/2006
POWER TRAIN SYSTEMS 2003/2004
POWERPLANT SYSTEMS 2016/2017 2015/2016
PRODUCTION PLANNING & CONTROL 2002/2003
SEMINAR II 2011/2012
SPECIAL TOPIC IN AUTOMOTIVE ENGINEERING I 2004/2005 2003/2004
STATICS 2003/2004 2001/2002
STATICS 2005/2006 2004/2005
STATICS 2013/2014 2012/2013 2010/2011
THERMODYNAMICS 2006/2007
THERMODYNAMICS 2015/2016 2014/2015 2006/2007
WORKSHOP TECHNOLOGY 2003/2004 2002/2003

Research Projects

Completed

2011 - 2013
Modification of The Design and Developed Hybrid Engine Powered Urban Concept Car
2011 - 2013
Large Eddy Simulation Modeling for Transesterification of Waste Vegetable oil
2011 - 2014
Dynamic Modelling of a Batch Bioreactor for Transesterification of Waste Vegetable Oil
2010 - 2014
Electromagnetic Actuated CVT System for Medium Size Passenger Car
2010 - 2012
The Hybrid Car With Waste Gas Recovery
2009 - 2012
Design & Fabrication of 2nd Generation IIUM Buggy Car
2008 - 2010
Study on Traction Mechanics of a Hybird Semi-Tracked-Wheeled Vehicle for Low Bearing Capacity Peat Soil
2008 - 2011
Fundamental Study and Development of a Low Cost Catalytic Converter
2008 - 2010
Design and Fabrication of 2nd Generation IIUM Buggy Car
2008 - 2011
Investigation and Probable Solution of Low End Torque Dip Problem of 1.6L Gasoline Engine
2008 - 2011
Design of Exhaust Muffler to Optimize Noise and Backpressure.

In Progress

2016 - Present
Thermal Analysis of Thermosyphon Systems using Different Refrigerants
2013 - Present
ESTABLISHMENT OF THE IIUM CENTRE OF EXCELLENCE FOR ELECTRIC MOBILITY(ICEM)

Award and Recognitions

12-12-2011
1st Prize, IEEE IMS FYP Competitions, December 2012 . IEEE Malaysia Chapter - National level.
12-12-2007
1st Prize, Final Year Project Competitions, December 2008 . SAE Malaysia - National level.
02-12-2011
2 Silver Medals . IRIIE 2012 - University level.
10-12-2010
Top 5 Depositor (IIUM Repository - IREP) . Rector - University level.
12-12-2007
Silver Medal . KERIE 2008 - University level.
12-12-2006
2 Silver Medals . KERIE 2007 - University level.

Publications

Article

2017
Throughput enhancement of car exhaust fabrication line by applying MOST. IOP Conference Series: Materials Science and Engineering , 184 pp.1-14.
2017
Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. IOP Conference Series: Materials Science and Engineering , 184 pp.1-7.
2017
Adoption of JMM practices – A key to performance improvement of a local automotive industry. IOP Conf. Series: Materials Science and Engineering , 184
2017
Intelligent Control Electromagnetic Actuated Continuously Variable Transmission System for Passenger Car. IOP Conf. Series: Materials Science and Engineering , 184
2017
Improvement design of parabolic trough. IOP Conf. Series: Materials Science and Engineering , 184
2017
Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). IOP Conf. Series: Materials Science and Engineering , 184
2017
Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). IOP Conf. Series: Materials Science and Engineering , 184
2017
Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering , 184
2017
Hybrid engine powered city car: fuzzy controlled approach. IOP Conference Series: Materials Science and Engineering , 184 pp.1-13.
2017
Modelling of an advanced charging system for electric vehicles. IOP Conf. Series: Materials Science and Engineering , 184
2016
Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology , 82 (1-4). pp.179-195.
2015
Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research , 1115 pp.109-112.
2015
Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal , 16 (2). pp.57-68.
2015
Painting process improvement through six sigma approach in a Malaysian vehicle assembly company. Advanced Materials Research , 1115 pp.596-600.
2015
Development of catalytic converter using non-precious metals. Advanced Materials Research , 1115 pp.462-467.
2015
Large eddy simulation for transesterification of waste vegetable oil. IIUM Engineering Journal , 16 (1). pp.53-79.
2015
Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal , 16 (2). pp.69-78.
2015
Adoption and adaptation of Japanese manufacturing management in an automotive company of Malaysia. Advanced Materials Research , 1115 pp.589-595.
2015
Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews , 51 pp.382-395.
2014
Design and investigation of a fuel cell car prototype. International Journal of Vehicle Systems Modelling and Testing , 9 (3/4). pp.321-333.
2014
Energy efficient electromagnetic actuated CVT system. Journal of Mechanical Science and Technology , 28 (4). pp.1153-1160.
2013
CFD modeling of waste cooking oil transesterification in a stirred tank reactor. World Applied Sciences Journal , 21 pp.151-158.
2013
Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation , 5 (4). pp.217-225.
2012
Mixed-flow impeller characteristics in baffled mixing tank . Advanced Materials Research , 576 pp.154-161.
2012
Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research , 445 pp.899-904.
2012
Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS) , 19 (4). pp.407-426.
2012
Unconventional method for monitoring of waste cooking oil transesterification. Advanced Materials Research , 576 pp.357-361.
2012
Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology , 26 (7). pp.1-9.
2011
A study on automated traction control system of an electrical golf car. International Journal of Electric and Hybrid Vehicles (IJEHV) , 3 (1). pp.47-61.
2011
Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology , 12 (5). pp.745-753.
2011
Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology , 75 pp.50-57.
2011
Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research , 265 pp.1719-1724.
2011
Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing , 6 (3/4). pp.202-218.
2011
Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 225 pp.721-734.
2011
Performance measurement of a tracked vehicle system. International Journal of Automotive Technology , 12 (4). pp.503-512.
2011
Waste cooking oil transesterification: influence of impeller type, temperature, speed and bottom clearance on FAME yield. African Journal of Biotechnology , 10 (44). pp.8914-8929.
2011
Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS) , 18 (3). pp.227-244.
2011
Investigation of the Swirl Effect on Engine Using Designed Swirl Adapter. IIUM Engineering Journal , 12 (3). pp.201-209.
2011
Biodiesel production: a mini review. International Energy Journal (IEJ) , 12 (1). pp.15-27.
2011
Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology , 25 (4). pp.1035-1041.
2011
Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. Journal of Terramechanics
2010
Multi-agent application: a novel algorithm for hexapod robots gait transitions. Australian Journal of Basic and Applied Sciences , 4 (8). pp.2292-2299.
2010
Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. International Journal of Aerospace and Mechanical Engineering , 4 (1). pp.288-295.
2010
Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption. International Journal of Vehicle Systems Modelling and Testing , 5 (2/3). pp.237-253.
2010
Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach. World Academy of Science, Engineering and Technology , 62 pp.163-169.
2010
Power consumption prediction for an intelligent air-cushion tracked vehicle: fuzzy expert system. Journal of Energy and Power Engineering , 4 (5). pp.10-17.
2010
Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics , 47 (1). pp.45-54.
2009
Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal (3). pp.63-71.
2009
Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal , 3 pp.15-28.
2009
Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS) , 16 (1/2). pp.225-242.
2008
Experimental analysis of noise and back pressure for muffler design. Jurnal Kejuruteraan , 20 pp.151-161.
2008
Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME) , 3 (2). pp.176-186.
2007
Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (2). pp.189-199.
2007
An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (1). pp.84-92.
2007
Experimental analysis and comparison performance characterisation of catalytic converters including simulation. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (1). pp.1-7.
2007
Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal , 8 (3). pp.155-162.
2007
Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 221 pp.789-800.
2007
Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (2). pp.118-124.
2007
Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME) , 2 (1). pp.40-47.
2005
The successful implementation of TPM in conjunction with EOM and 5S: a case presentation. Journal of Applied Sciences , 5 (5). pp.938-951.
2005
Collaborative technologies in new factory's certification process. Journal of Applied Sciences , 5 (2). pp.267-272.
2005
Experimental study of noise and back pressure for silencer design characteristics. Journal of Applied Sciences , 5 (7). pp.1292-1298.
2005
Experimental study in a spray filled tower for flow visualization and drift eliminators characteristics. Journal of Applied Sciences , 5 (2). pp.284-291.
1997
Optimal thermal design of wet cooling towers . Journal of The Institution of Engineers, Singapore , 37 (6). pp.31-34.
1996
Knowledge base for the systematic design of wet cooling towers. Part II: Fill and other design parameters. International Journal of Refrigeration , 19 (1). pp.52-60.
1996
ESTOWER: an expert system for the thermal design of wet cooling towers. Engineering Applications of Artificial Intelligence , 9 (2). pp.185-194.
1996
Knowledge base for the systematic design of wet cooling towers. Part I: Selection and tower characteristics. International Journal of Refrigeration , 19 (1). pp.43-51.
1993
Characteristics of drift eliminators of an evaporative condenser . Journal of Energy, Heat and Mass Transfer , 15 pp.331-337.
1992
An experimental study on packing and drift eliminators in an evaporative condenser with induced draft. Indian Journal of Technology , 30 pp.507-511.
1992
Cooling tower: an energy conservation resource. Journal of the Institution of Engineers, Bangladesh , 20 (1-2). pp.63-68.
1991
Analysis of mechanical draft wet cooling towers. Journal of Energy, Heat and Mass Transfer , 13 pp.165-187.

Book Section

2011
Experimental analysis and comparison of performance characteristics of catalytic converters . In: Engine and auxiliary system . IIUM Press , Kuala Lumpur , pp.1-7. ISBN 978-967-418-216-8.
2011
Design and development of an automatic car door opening and locking system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.48-52. ISBN 9789670225685.
2011
Comparative study of emission characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative Energy . IIUM Press , Kuala Lumpur , pp.74-78. ISBN 9789674181581.
2011
Alternative mixing strategy for biodiesel production: mixed flow impeller characterization. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.188-196. ISBN 9789674181581.
2011
Analysis of engine performance with enhanced fuel. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.147-155. ISBN 9789674181581.
2011
Turbulence model for axial mixing impeller in unbaffled vessel. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.97-102. ISBN 9789674181581.
2011
Solar energy management for poverty alleviation and income generating activities. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.91-96. ISBN 9789674181581.
2011
Comparative study of performance characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.69-73. ISBN 9789674181581.
2011
Thermodynamic analysis of combustion of CAMPRO CFE engine – part II: combustion analysis. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.116-122. ISBN 978-967-418-216-8.
2011
Investigation of spark ignition multipoint engine using water addition - Part II: performance and emission . In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.101-108. ISBN 978-967-418-216-8.
2011
3-Cylinder gasoline direct injection as opposed to 4-cylinder multi-port fuel injection for lower fuel consumption and NOX emission. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.86-91. ISBN 978-967-418-216-8.
2011
Comparison of various types of powertrain used in automotive vehicles in terms of performance and emission. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.74-79. ISBN 978-967-418-216-8.
2011
A study of an aftermarket voltage stabilizer for its performance and emission on passengers vehicle. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.60-66. ISBN 978-967-418-216-8.
2011
2nd generation IIUM buggy car – part II: fabrication. In: Engine and auxiliary systems . IIUM Press , Kuala Lumpur , pp.48-59. ISBN 978-967-418-216-8.
2011
Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part II: Experimental results. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.36-41. ISBN 978-967-418-216-8.
2011
Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part I: Muffler design requirements. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.29-35. ISBN 978-967-418-216-8.
2011
Experimental analysis and simulation of catalytic converters. In: Engine and auxiliary systems . IIUM Press , Kuala Lumpur , pp.8-13. ISBN 978-967-418-216-8.
2011
A gait transition method for Hexapod robots. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.364-372. ISBN 9789670225685.
2011
Comparative study of combustion characteristics using Jatropha oil methyl esters biodiesel and diesel. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.262-268. ISBN 9789674181581.
2011
Preliminary investigation of biodiesel reactor optimization using combine CFD-Taguchi method. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.179-187. ISBN 9789674181581.
2011
Analysis of engine performance with NGV. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.140-146. ISBN 9789674181581.
2011
Flow characteristic of mixing impeller for liquid-liquid mixing. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.85-90. ISBN 9789674181581.
2011
Waste cooking oil utilization for biodiesel production. In: Alternative energy . IIUM Press , Kuala Lumpur , pp.79-84. ISBN 9789674181581.
2011
Development of low cost catalytic converter from non-precious metals. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.123-130. ISBN 978-967-418-216-8.
2011
Thermodynamic analysis of combustion of CAMPRO CFE engine – part I: simulation. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.109-115. ISBN 978-967-418-216-8.
2011
Investigation of spark ignition multipoint engine using water addition - part I : simulation. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.92-100. ISBN 978-967-418-216-8.
2011
Automotive catalytic converters : current status and some future perspectives. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.80-85. ISBN 978-967-418-216-8.
2011
Investigation of engine performance using designed swirl adapter . In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.67-73. ISBN 978-967-418-216-8.
2011
Robust design optimization of valve timing using multi-objective genetic algorithm (MOGA) . In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.53-59. ISBN 978-967-418-216-8.
2011
2nd generation IIUM buggy car – Part I: design . In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.42-47. ISBN 978-967-418-216-8.
2011
Exhaust system optimization using GT- Power. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.21-28. ISBN 978-967-418-216-8.
2011
Thermal design of mechanical devices using expert system. In: Engine and Auxiliary Systems . IIUM Press , Kuala Lumpur , pp.14-20. ISBN 978-967-418-216-8.

Conference or Workshop Item

2017
Modelling of an advanced charging system for electric vehicles. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16) , Kuala Lumpur
2017
Adoption of JMM practices – A key to performance improvement of a local automotive industry. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2015
Performance improvement of local automotive industry by adopting JMM. In: International Conference on Mechanical Engineering 2015 (ICME 2015) , Dhaka, Bangladesh
2015
The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015) , Singapore
2015
Finite element modeling of clinching process for joining dissimilar materials. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014) , Kuala Lumpur
2014
Six sigma approach to improve the painting process: a case study of a Malaysian vehicle assembly company. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) , Kuala Lumpur, Malaysia
2014
Development of catalytic converter using low cost metal. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) , Kuala Lumpur, Malaysia
2014
Modelling and simulation of spark ignition engine using water addition and validated through experimental envestigations. In: The 5th IASTED International Conference on Modelling, Simulation and Identification (MSI 2014) , Banff, Canada
2014
Large eddy simulation modelling for transesterification of waste vegetable oil. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014 , Kuala Lumpur
2014
Adoption and adaptation of Japanese manufacturing management: a case study of an automotive company in Malaysia. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) , Kuala Lumpur, Malaysia
2013
3-D CFD transient simulation of transesterification in stirred tank reactor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) , Kuala Lumpur, Malaysia
2013
Numerical simulation of biodiesel production using waste cooking oil. In: ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE 2013) , San Diego, CA, USA
2013
Design and Development of a Fuel Cell Car Prototype. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) , Kuala Lumpur, Malaysia
2012
Numerical modelling of mixed flow impeller in stirred vessel. In: ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 , Houston, Texas, USA
2012
CFD simulation of biodiesel production using mixed flow impeller in baffled and unbaffled stirred vessel. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012) , Kuala Lumpur, Malaysia
2011
Analysis of mixing in stirred vessels using CFD: waste cooking oil transesterification. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Legend Hotel, Kuala Lumpur
2011
Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition , Detroit, MI, USA
2011
Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011) , Kuala Lumpur, Malaysia
2011
Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011) , Istanbul, Turkey
2011
Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Simulation and experimental validation: waste cooking oil transesterification using rushton and elephant ear impellers. In: The IASTED International Conference on Modelling, Simulation, and Identification (MSI 2011) , Pittsburgh, USA
2011
Waste cooking oil transesterification: influence of impeller type, speed and bottom clearance on fame yield. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011) , The Legend Hotel, Kuala Lumpur
2011
Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011 , Sheraton Krabi Beach Resort, Krabi, Thailand
2011
Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Kuala Lumpur, Malaysia
2011
Analysis of engine performance with enhanced fuel. In: 3rd (2011) CUTSE International Conference , Miri, Sarawak, Malaysia
2011
Analysis of engine performance with NGV. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) , Legend Hotel, Kuala Lumpur, Malaysia
2010
Finite element method for the study of air-cushion tracked vehicle-terrain interaction. In: International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010) , Khulna, Bangladesh
2010
Hydrodynamic effects during waste cooking oil transesterification using CFD. In: ICIEBM, International Conference on Industrial Engineering and Business Management 2010 , Yogyakarta, Indonesia
2010
Tractive efficiency analysis for an intelligent air-cushion tracked vehicle. In: ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010 , Vancouver, British Columbia, Canada
2010
Development of an intelligent air-cushion system for a swamp tracked vehicle . In: 33rd FISITA World Automotive Congress 2010 , Budapest, Hungary
2010
Biodiesel reactor optimization using combined CFD-Taguchi method. In: International Postgraduate Conference on Engineering (IPCE 2010) , Perlis, Malaysia
2009
Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009) , Dhaka, Bangladesh
2009
Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009) , Dhaka, Bangladesh
2009
Intelligent air-cushion system of swamp peat vehicle control: fuzzy logic technique. In: International Conference on Mechanical Engineering 2009 (ICME2009) , Dhaka, Bangladeh
2009
Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009 , Kuala Lumpur, Malaysia
2009
Electromagnetic actuated CVT system for vehicle. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2009 (IEEM 2009) , Hong Kong
2008
Integrated mechanics for design of the hybrid electrical aircushion track vehicle for swamp peat. In: 4th BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2008
Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering , Cairo, Egypt
2008
Probable solution of torque dip problem of CAMPRO 1.6L engine . In: 4th BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2008
Modeling of the developed flexible skirt air-cushion track vehicle model. In: 4th BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2008
Design optimization of valve timing at various engine speeds using Multi-Objective Genetic Algorithm (MOGA) . In: 19th IASTED International Conference Modelling and Simulation , Quebec City, Quebec, Canada
2008
Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08 , Kuala Lumpur, Malaysia
2008
Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008 , Germany
2007
Energy and thermodynamic performance of refrigerator using pure hydrocarbon and mixture of hydrocarbons as refrigerants. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2007
Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2007
Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2007
A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2006
Facility and maintenance engineering for new factory’s certification process. In: The1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Materials Processing (ICMM2006) , Kuala Lumpur, Malaysia
2006
Design and development of automobile exhaust system using GT-power. In: 3rd BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2005
Experimental investigation and simulation of catalytic converter performance. In: 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2005) , Cairo, Egypt
2005
Muffler design optimization through experimental analysis of noise and back pressure. In: The 2nd International Conference on Mechatronics (ICOM'05) , Kuala Lumpur, Malaysia
2005
Analysis and comparison of performance characteristics of catalytic converters. In: International Conference on Mechanical Engineering 2005 (ICME 2005) , Dhaka, Bangladesh
2004
Accelerated new factory certification using CE methodology. In: 2nd International Industrial Engineering Conference (IIEC-2004) , Riyadh, Kingdom of Saudi Arabia
2004
New factory's certification process – Use of collaborative technologies as a tool. In: 4th International Mechanical Engineering Conference & 9th Annual Paper Meet , Dhaka, Bangladesh
2004
Establishing new factory with technology certification roadmap. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004) , Kuala Lumpur, Malaysia
2004
Experimental study of drift eliminators in a spray filled tower. In: 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2004) , Cape Town, South Africa
2003
Artificial intelligence - A tool for thermal design of cooling towers. In: 2nd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT 2003) , Victoria Falls, Zambia
2003
Expert system for the thermal design of mechanical devices. In: The 7th IEEE International Conference On Intelligent Engineering Systems (INES 2003) , Assiut - Luxor, Egypt
2002
An experimental study on spray filled tower. In: BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2002
Solar energy management for poverty alleviation and income generating activities in rural areas. In: International Conference on Manufacturing (ICM 2002) , Dhaka, Bangladesh
1997
Heat transfer augmentation in Rib-Roughened Narrow channels with one-sided heating. In: Second International Seminar on Fluid Mechanics and Heat Transfer , Dhaka, Bangladesh
1996
Energy conservation through optimal design of cooling towers. In: Third Annual Paper Meet, The Institution of Engineers, Bangladesh , Dhaka, Bangladeh