Staff Details

A. H. M. Zahirul Alam

A. H. M. Zahirul Alam
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 4529

Academic Qualification

  • Bachelor in Electrical and Electronic Engineering - Bachelor Degree , Bangladesh University of Engineering & Technology, Dhaka
  • Master in Electrical and Electronic Engineering - Masters Degree , Bangladesh University of Engineering & Technology, Dhaka
  • Ph.D in Natural Science & Technology - Doctor of Philosophy , Kanazawa University

Professional Membership

  • 2006-2025 Life Fellow, Institution of Engineers, Bangladesh (IEB, Bangladesh)
  • 2016-2024 Member, International Association of Engineers (IAENG)
  • 2005-2024 Fellow, Bangladesh Computer Society (BCS)
  • 2006-2017 Senior Member,
  • 2017 Executive Member, IEEE EDS MAlaysia Chapter

Teaching Responsibilities

ANALOG CIRCUIT DESIGN 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
COMPUTER AND INFORMATION ENGINEERING LAB III 2010/2011 2009/2010 2008/2009
DIGITAL COMMUNICATIONS 2003/2004
ELECTRIC CIRCUITS 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005
ELECTRIC CIRCUITS 2013/2014 2011/2012 2010/2011 2009/2010 2004/2005 2003/2004
ELECTRIC CIRCUITS 2016/2017
ELECTRICAL AND COMPUTER ENGINEERING LAB I 2013/2014
ELECTRONIC CIRCUITS 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
ELECTRONIC CIRCUITS 2016/2017
ENGINEERING LAB I 2012/2013 2009/2010 2007/2008 2006/2007 2005/2006
INTEGRATED CIRCUIT TECHNOLOGY 2016/2017 2008/2009
INTEGRATED CIRCUIT TECHNOLOGY 2016/2017
MICROELECTRONIC CIRCUITS 2006/2007 2004/2005
MICROELECTRONIC CIRCUITS 2005/2006 2004/2005
SEMICONDUCTOR DEVICES 2011/2012 2007/2008
VLSI DESIGN 2009/2010 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005 2003/2004
VLSI DESIGN 2010/2011 2009/2010 2008/2009

Research Projects

Completed

2012 - 2014
Development of Electrical Vehicle by Converting Proton SAGA Conventional Car
2011 - 2011
Design And Development Of RFID Tag Antenna For The Use Of Metallic Item
2011 - 2015
Novel Vertically Integrated Nano GHz Surface Acoustic Wave Oscillator for RF Applications
2011 - 2012
Study of the Electrical Properties of Radiation Hard Devices Based on III-V Materials
2010 - 2011
Modeling and Characterization of Magnetic materials at low Frequencies for Nano-sensor fabrication
2010 - 2014
Electromagnetic Actuated CVT System for Medium Size Passenger Car
2010 - 2013
Characterization of Radio Channel for Body Area Networks
2009 -
Sigma-to-beta Converter Analysis, Simulation and Experimental Details.
2009 - 2012
Modeling of a Novel Integrated Surface Acoustic Wave Resonator
2009 - 2011
Design of Capacitance Voltage Converter for Development of High Frequency Band Sensor Transducer for Capacitive Measuring Systems
2009 - 2011
Design and Stimulation of Adaptive Beamforming Algorithm and Linear Array Antenna for Smart Antenna System
2009 - 2011
Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2008 - 2010
Characterization of Indoor Powerlines As Data Channels- Experimental Details and Results
2008 - 2010
Wireless Data Acquisition for Monitoring of Civil Structures with Embedded Sensors - Experimental Results
2007 - 2009
Characterization of Direct Sensor-to-Microcontroller Interfacing
2006 - 2010
Measurement of Specific Absorption Rate from Wireless LAN Radiation in International Islamic University Campus
2006 -
Design and Fabrication of High Performance RF-MEMS Switches

In Progress

2013 - Present
Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - Present
Lard and Alcohol Detection in Food and Beverages using Newly Developed Portable Near Infrared Microspectrometer
2013 - Present
Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates
2013 - Present
Development of Green Transportation System
2013 - Present
Exploration on CMOS Capacitance Based Structural Health Monitoring by Energy Harversted Wireless Sensor Networks
2012 - Present
A Development of a Top Down Silicon Nanoware into Field Effect Transistor
2012 - Present
Design and development of MEMS Acoustic Energy Harvester

Award and Recognitions

10-12-2011
Proton Green Mobility Challange 2012 . Proton & MOSTI - National level.
05-12-2007
Kulliyyah Best Lecturer . IIUM - University level.

Publications

Article

2016
Analysis on the effect of stimulator parameters in electrical stimulation procedure on the human bicep muscle. Jurnal Teknologi , 78 (7-5). pp.15-22.
2016
A study on controllable aluminium doped zinc oxide patterning by chemical etching for MEMS application. Microsystems Technologies pp.1-12.
2016
Efficient capacitance sensing for wireless health monitoring system.. IIUM Engineering Journal , 17 (2). pp.21-29.
2016
Daily activity monitoring of an elderly Person for determining their wellness. International Journal of Smart Home , Vol. 10, No.8 pp.339-346.
2015
Obtaining hysteresis loops at low frequency for characterization of materials to be used in biomedical applications. IIUM Engineering Journal , 16 (1). pp.19-32.
2015
On the issue of fly-back spikes in PWM operated single-phase transformer-less grid-tied inverter. MAGNT Research Report , 3 (5). pp.1-5.
2015
Piezoelectric thin films for double electrode CMOS MEMS surface acoustic wave (SAW) resonator. Microsystems Technologies , 21 pp.1931-1940.
2015
Multi-frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies , 21 (9). pp.1915-1922.
2015
Medium voltage range energy harvester application using boost converter. ARPN Journal of Engineering and Applied Sciences , 10 (21). pp.9744-9747.
2015
A DC-DC circuit using boost converter for low voltage energy harvesting application. American Journal of Applied Sciences , 12 (4). pp.272-275.
2015
Multi?frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies , 21 (9). pp.1915-1922.
2014
LM555 timer-based inverter low power pure sinusoidal AC output. World Applied Sciences Journal , 30 pp.141-143.
2014
DC-DC boost converter for grid-tied renewable energy generation systems. World Applied Sciences Journal , 30 pp.144-147.
2014
A study on health monitoring system: recent advancements. IIUM Engineering Journal , 15 (2). pp.87-99.
2014
Development of electric vehicle: public perception and attitude, the Malaysian approach. World Review of Business Research , 5 (2). pp.149-167.
2014
Small band-gap-based CNT for modeling of nano sensor. Procedia Computer Science , 42 pp.122-129.
2014
Design and simulation of RF-CMOS SPST switch for reconfigurable RF front-end. International Journal of Advancement in Electronics and Electrical Engineering , 4 (1). pp.13-23.
2014
Current Loss Comparison of PWM Operated Transformer-Based and Transformer-Less Inverter. International Journal of Advanced Research in Electronics and Communication Engineering (IJARECE) , 3 (3). pp.343-346.
2014
Mems-based oscillators: a review. IIUM Engineering Journal , 15 (1). pp.1-15.
2014
Development of electric vehicle: public perceptionand attitude, the Malaysian approach. World Review on International Transportation Research , 5 (2). pp.149-167.
2014
Analysis of carbon nanotube device physics . American Journal of Nano Research and Application , 2 (6). pp.112-115.
2014
Analysis and evaluation of differential inductive transducers for transforming physical parameters into usable output frequency signal. International Journal of Physical Sciences , 9 (15). pp.339-349.
2014
Carbon nanotubes: a review on future generation nano device. Middle-East Journal of Scientific Research , 20 (1). pp.74-81.
2013
A qualitative review for wireless health monitoring system . IOP Conference Series: Materials Science and Engineering , 53 (1). pp.1-7.
2013
Modeling of a carbon nanotube sensing device. Middle-East Journal of Scientific Research , 17 (10). pp.1475-1478.
2013
Environmental friendly device: modeling of carbon nanotube with optimum chirality. Australian Journal of Basic and Applied Sciences , 7 (8). pp.648-652.
2013
Transforming human gait for signature signals characterization. Materials Science and Engineering , 53 pp.1-7.
2013
Design and Development of a Simulator for Modelling Carbon Nanotube. IOP Conference Series: Materials Science and Engineering , 53(1) (012049). pp.1-6.
2013
Investigation on carbon nanotube electronics structure . Pensee Journal , 75 (11). pp.123-129.
2012
Design of a multiple valued logic analog to digital converter using 0.13?m CMOS process. Science Series Data Report , 4 (3). pp.(1-8).
2012
Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology , 26 (7). pp.1-9.
2012
Design of microstrip patch antenna using slotted partial ground and addition of stairs and stubs for UWB application . Cyber Journals : Multidisciplinary Journals in Science and Technology, Journal of Selected Areas in Telecommunications (JSAT)
2012
Development of a 2-digit multi valued analog-to-digital converter. World Applied Sciences Journal , 17 (5). pp.622-625.
2012
Fuzzy knowledge-based model for prediction of traction force of an electric golf car. Journal of Terramechanics , 49 (1). pp.13-25.
2011
An investigation of soft magnetic and non magnetic materials under low frequency. IIUM Engineering Journal , 12 (6). pp.59-70.
2011
Design of a multi valued current mode comparator. Australian Journal of Basic and Applied Sciences , 5 (10). pp.662-666.
2011
Design and implementation of potentiometer-based nonlinear transducer emulator. IIUM Engineering Journal , 12 (1). pp.77-87.
2011
Development of economical maximum power point tracking system for solar cell. Australian Journal of Basic and Applied Sciences , 5 (5). pp.700-713.
2010
Tunning fork type ultra wide band (UBW) antenna . pp.41.
2010
Fade margin analysis due to duststorm based on visibility data measured in a desert. American Journal of Applied Sciences , 7 (4). pp.551-555.
2010
Prediction of signal attenuation due to duststorms using mie scattering. IIUM Engineering Journal , 11 (1). pp.71-87.
2010
Design of capacitance to voltage converter for capacitive sensor transducer. American Journal of Applied Sciences , 7 (10). pp.1353-1357.
2009
Effects of MEMS material on designing a multi-band reconfigurable antenna. Iranian Journal of Electrical and Computer Engineering , 8 (2). pp.112-118.
2009
Characterization of indoor power lines as data communication channels experimental details and results. International Journal of Electrical and Computer Engineering , 4 (10). pp.647-651.
2009
Microelectrical mechanical systems switch for designing multi-band antenna. Journal of Computer Science , 5 (7). pp.479-486.
2009
Design of a high-speed, reconfigurable digital rank order filter. IIUM Engineering Journal , 10 (1). pp.19-30.
2009
Design of multi-valued quaternary based analog-to-digital converter. American Journal of Applied Sciences , 6 (8). pp.1522-1527.
2009
Tunable bandpass filter using RF MEMS switches. IIUM Engineering Journal , 10 (2). pp.69-80.
2008
Capacitive transducer circuits for liquid level measurement. International Journal of Computer Sciences and Engineering Systems , 2 (3). pp.195-197.
2008
Rule-based fuzzy logic controller with adaptable reference. International Journal of Electrical and Computer Engineering , 3 (1). pp.7-11.
2008
Analysis and implementation of nonlinear transducer response over a wider response range. Sensors & Transducers Journal , 89 (3). pp.61-70.
2008
Design of a planar structure of multifrequency patch antenna. IJCSES International Journal of Computer Sciences and Engineering Systems, , 2 (3). pp.207-211.
2008
Design and implementation of an optimal fuzzy logic controller using genetic algorithm. Journal of Computer Science , 4 (10). pp.799-806.
2007
A high accuracy measurement circuit for soil moisture detection. World Academy of Science, Engineering and Technology , 1 (11). pp.947-950.

Book Section

2011
Design of symmetrical fed patch UWB antenna using partial ground and stairs . In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.22-32. ISBN 9789674181383.
2011
Application and case studies of magnetic induction . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.343-344. ISBN 978-967-418-172-7.
2011
Overview of Radio Frequency Microelectromechanical systems reconfigurable antennas. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.450-457. ISBN 9789670225685.
2011
Design and implementation of an optimal fuzzy logic controller using egentic algorithm . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.249-264. ISBN 978-967-418-172-7.
2011
2.45 Ghz passive RFID tag antenna mounting on various platforms . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.201-215. ISBN 978-967-418-172-7.
2011
The principle of resistive sensing . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.75-81. ISBN 978-967-418-172-7.
2011
Magnetic properties for magnetic transducer . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.65-70. ISBN 978-967-418-172-7.
2011
RC circuit response. In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.1-6. ISBN 978-967-418-172-7.
2011
Simulations of resistance variations to pulse generator circuits. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.177-183. ISBN 9789674181710.
2011
MVL design and current mode circuit elements. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.159-163. ISBN 9789674181710.
2011
A study of linearization technique using a nonlinear thermistor. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.117-122. ISBN 9789674181710.
2011
Mathematical model for contactless measurement. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.102-106. ISBN 9789674181710.
2011
Principle of capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.89-94. ISBN 9789674181710.
2011
Design of linear array antenna for smart antenna application. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.121-136. ISBN 9789674181383.
2011
Direction of arrival algorithms for array antenna design. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.97-107. ISBN 9789674181383.
2011
Leaky-wave array antenna. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.83-88. ISBN 9789674181383.
2011
Multi-band planar patch antenna. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.69-75. ISBN 9789674181383.
2011
Design of capacitive measuring system for high frequency band sensor transducer. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.83-88. ISBN 9789674181710.
2011
Design of unsymmetrical fed patch UWB antenna with unsymmetrical slotted ground . In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.49-55. ISBN 9789674181383.
2011
Implementation of capacitance to voltage converter for capacitive transducers. In: Selected readings in computing and telecommunications . IIUM Press , Kuala Lumpur , pp.255-273. ISBN 9789670225814.
2011
Ultra wideband antenna with band notch using asymmetrical feedline. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.56-62. ISBN 9789674181383.
2011
Transducers-to-microcntroller interfaces-software solution approach . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.277-290. ISBN 978-967-418-172-7.
2011
Piece-wise linear analog to digital (PLADC) converter process . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.239-247. ISBN 978-967-418-172-7.
2011
UWB pulse generation,shaping and analysis . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.133-137. ISBN 978-967-418-172-7.
2011
Magnetic hysteresis theory :application perspective . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.71-74. ISBN 978-967-418-172-7.
2011
Basic concept of inductance for inductive transducers . In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.59-63. ISBN 978-967-418-172-7.
2011
Inductive power system for energy harvesting. In: Principle of Transducer Devices and Components . IIUM Press , Kuala Lumpur , pp.45-51. ISBN 978-967-418-172-7.
2011
UWB pulse generation and shaping: analysis and simulation results. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.173-176. ISBN 9789674181710.
2011
MVL ADC design and simulation. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.153-158. ISBN 9789674181710.
2011
A mathematical study of a thermistor astable multivibrator in a linearization technique. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.113-116. ISBN 9789674181710.
2011
CMOS operational amplifier for capacitance to voltage converter. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.95-101. ISBN 9789674181710.
2011
Inductive sensor. In: Interfacing electronic for measurement, signal processing and wireless communication . IIUM Press , Kuala Lumpur , pp.1-7. ISBN 9789674181710.
2011
Analysis of beamforming algorithms. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.108-120. ISBN 9789674181383.
2011
Overview of smart antenna systems. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.89-96. ISBN 9789674181383.
2011
Tuning fork type planar antenna. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.76-82. ISBN 9789674181383.
2011
Design of symmetrical fed patch UWB antenna using slotted partial ground and stairs. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.33-39. ISBN 9789674181383.
2011
Multi-band reconfigurable antenna using RF MEMS switch. In: Antennas and propagation: Modeling, simulation & measurements . IIUM Press , Kuala Lumpur , pp.63-68. ISBN 9789674181383.
2011
MEMS surface acoustic waves oscillator. In: Selected topics in advanced electronics . IIUM Press , Kuala Lumpur , pp.23-36. ISBN 9789674181536.

Conference or Workshop Item

2017
Current behavior analysis of the single supply differential capacitive sensing. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016) , Kuala Lumpur
2016
Massive MIMO for Fifth Generation (5G): Opportunities and challenges. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016) , Kuala Lumpur
2016
Capacitance sensing and energy harvesting for wireless health monitoring system. In: 2016 International Conference on Intelligent Systems Engineering (ICISE) , Islamabad, Pakistan
2016
Wireless capacitor sensing for structural health monitor . In: World Congress on Engineering 2016 , London, United Kingdom
2016
Application of UWB wireless MIMO connectivity inside modern aircraft. In: 2016 International Conference on Intelligent Systems Engineering (ICISE) , Islamabad, Pakistan
2015
Parametric sweep analysis of medium voltage range boost converter for energy harvester application. In: 2015 IEEE International WIE Conference on Electrical and Computer Engineering (WIECON-ECE) , Dhaka, Bangladesh
2015
A pressure sensor based inductive transducer designed for biomedical applications. In: 2015 IEEE 3rd international conference on smart instrumentations, measurement and applications (ICSIMA 2015) , PutraJjaya
2015
Passive monitoring techniques for elderly: a review on recent development and prospective. In: World Congress on Engineering and Computer Science 2015 , San Francisco, USA
2015
DIBL and subthreshold swing effect on carbon nanotube field effect transistor. In: World Congress on Engineering (WCE 2015) , London, UK
2015
Parametric analysis of single boost converter for energy harvester. In: 2015 IEEE 3rd International Conference on Smart Instrumentations, Measurement and Applications (ICSIMA 2015) , Kuala Lumpur
2015
A low cost capacitive sensing system for monitoring and detecting falls of senior citizens. In: 2015 IEEE 3rd International Conference on Smart Instrumentations, Measurement and Applications (ICSIMA 2015) , Putrajaya
2015
High frequency CNTFET-based logic gate. In: 10th IEEE 2015 Regional Symposium on Micro and Nanoelectronics (RSM 2015) , Kuala Terengganu
2014
Comparison of ITU-R predicted rainfall rates against measured data in Malaysia. In: 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA) , Kota Kinabalu
2014
Investigation on grid synchronization for grid-tied DC-AC single phase inverters. In: International Conference on Computer & Communication Engineering 2014 , Sunway Putra Hotel, Kuala Lumpur
2014
Application of UWB wireless MIMO connectivity inside ships. In: 5th International Conference on Computer & Communication Engineering 2014 , Kuala Lumpur
2014
Spice model design for carbon nanotube field effect transistor (CNTFET). In: 2014 IEEE International Conference on Semiconductor Electronics (ICSE) , Kuala Lumpur
2014
Single-phase inverter for small voltage supplies for use in distributed measurement systems. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Kuala Lumpur, MAlaysia
2014
Analysis of phase detection circuit for human activity. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Kuala Lumpur, MAlaysia
2014
Assessment of ITU-R conversion method for 1- minute integration time of precipitation intensity in Malaysia. In: 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA) , Kota Kinabalu
2014
Multi-level DC-AC inverter for grid-tied renewable energy systems. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014) , Cultural Activity Center (CAC), Internatioanal Islamic University Malaysia
2014
Modeling and simulation of CNTFET small signal model. In: 2014 IEEE 6th International Nanoelectronics Conference(INEC) , Hokkaido , Japan
2014
Optimum performance of carbon nanotube field effect transistor. In: World Congress on Engineering and Computer Science 2014 , San Francisco, USA
2014
CNTFET SPICE model: design of a carbon nanotube field effect transistor. In: 5th International Conference on Computer & Communication Engineering 2014 , Kuala Lumpur, Malaysia
2014
Automated person tracking using proximity capacitive sensors. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Kuala Lumpur, MAlaysia
2014
CNTFET inverter: a high voltage gain logic gate. In: 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2014) , Kuala Lumpur, MAlaysia
2013
Real-time bridge scour monitoring system by using capacitor sensor. In: 3rd International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2013) , Nagoya, Japan
2013
Development of a position detection technique for UWB chipless RFID tagged object. In: 2013 International Conference on Computing, Electrical and Electronics Engineering (ICCEEE 2013) , Khartoum, Sudan
2013
0.35?m SPDT RF CMOS switch for wireless communication application. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013) , Langkawi, Malaysia
2013
Boost converter for low voltage energy harvesting applications: basic component selection. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Kuala Lumpur
2013
Fast UWB wireless connectivity for MIMO multi-user. In: The 4th International Conference on Information & Communication Technology for the Muslim World (ICT4M) , Rabat, Moroco
2013
Modeling of small Band-gap CNT for designing of faster switching CNTFET. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium , Langkawi, Malaysia
2013
DC-DC boost converter for grid-tied renewable energy generation systems. In: International Conference on Innovation Challenges in Multidiciplinary Research & Practice (ICMRP 2013) , Pearl International Hotel, Kuala Lumpur
2013
Simple and efficient multibiometric technique for subject recognition using multilead electrocardiogram signal. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Kuala Lumpur Malaysia
2013
Modeling of optimum chiral carbon nanotube using DFT. In: 13th IEEE International Conference on Nanotechnology , Beijing, China
2013
High frequency small signal modeling of CNTFET. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013) , Langkawi, Malaysia
2013
Parametric analysis for designing low voltage and low frequency energy harvester booster. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013) , Langkawi, Malaysia
2013
Development of green transportation system. In: IIUM Enginnering Congress 2013(2-4July 2013) , Kuala Lumpur, Malaysia
2013
Analysis of CNT electronics structure to design CNTFET. In: 2013 IEEE 5th International Nanoelectronics Conference (INEC) , Singapore
2012
Design of a pierce oscillator for CMOS SAW resonator. In: International Conference on Computer and Communication Engineering (ICCCE 2012) , Seri Pacific Hotel Kuala Lumpur
2012
Sub-nano seconds UWB pulse shaping with reduced ringing phenomenon. In: International Conference on Computer and Communication Engineering (ICCCE 2012) , Seri Pacific Hotel Kuala Lumpur
2012
Investigation of inductive coupling approach for non-contact bidirectional transfer of power and signal. In: International Conference on Computer and Communication Engineering (ICCCE 2012) , Seri Pacific Hotel Kuala Lumpur
2012
Tuning fork UWB antenna with unsymmetrical feed line. In: Progress In Electromagnetics Research Symposium , Moscow, Russia
2012
Pulse generation using avalanche transistor for ultra wide band communication: Analysis and simulation results. In: International Conference on Computer and Communication Engineering (ICCCE 2012) , Seri Pacific Hotel Kuala Lumpur
2012
An experimental magneto-inductive sensing technique for categorization of magnetic and non-magnetic materials. In: International Conference on Computer and Communication Engineering (ICCCE 2012) , Seri Pacific Hotel Kuala Lumpur
2012
Design of 0.13um CMOS multi-valued analog to digital converter. In: International Conference on Computer and Communication Engineering (ICCCE 2012) , Seri Pacific Hotel Kuala Lumpur
2011
A novel bandwidth enhancement technique for a compact right/left-handed (CRLH)transmission line (TL) based antenna. In: Progress in Electromagnetics Research Symposium Abstracts , Marrakesh, Morocco
2011
Modeling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011) , Kota Kinabalu, Malaysia
2011
Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM) , Kota Kinabalu, Malaysia
2011
U-shaped planer UWB antenna with unsymmetrical feed. In: International Symposium on Antennas and Propagation (ISAP 2011) , Jeju Island, Korea
2011
Characterization of materials using non-contact inductive sensor applications. In: The 4th International Conference on Mechatronics (ICOM'11) , The Legend Hotel, Kuala Lumpur, Malaysia
2011
Design of fuzzy based controller for modern elevator group with floor priority constraints. In: 4th International Conference on Mechatronics (ICOM'11) , Kuala Lumpur
2011
Analysis of rectifier circuits for low power and sensing application. In: 4th International Conference on Mechatronics (ICOM'11) , Kuala Lumpur
2011
Symmetrical analysis and evaluation of Differential Resistive Sensor output with GSM/GPRS network. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011) , Kuala Lumpur, Malaysia
2011
Modelling of inductive coupling transducer for activation of low wattage electronic implants. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics, RSM 2011 , Kota Kinabalu, Sabah
2011
2.45 GHz passive RFID tag antenna mounting on various platforms. In: 2011 IEEE International RF and Microwave Conference (RFM2011) , Seremban, Negeri Sembilan, Malaysia
2011
Proposing a horizontal path adjustment factor for microwave link's attenuation prediction based on the analysis of dust storm behavior . In: 10th Malaysia International Conference on Communications (MICC)11) , Sutera Habour Resort, Kota Kinabalu, Malaysia
2011
CMOS Op amp testing for capacitive measuring systems application. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2011) , Kota Kinabalu, Malaysia
2011
Analysis of rectifier circuits for low power and sensing applications. In: The 4th International Conference on Mechatronics (ICOM'11) , The Legend Hotel, Kuala Lumpur, Malaysia
2011
Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management , Singapore
2011
A low-cost first-order sigma-delta converter design and analysis. In: Instrumentation and Measurement Technology Conference (I2MTC), 2011 IEEE , Hangzhou, China,
2011
A proposed vertical path adjustment factor for dust storm attenuation prediction. In: 4th International Conference on Mechatronics (ICOM'11) , Kuala Lumpur
2011
Capacitance-to-voltage converter for capacitance measuring system. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011) , Kuala Lumpur, Malaysia
2011
Design of a 2-bit multi valued analog-to-digital converter . In: 4th International Conference on Mechatronics (ICOM) , Kuala Lumpur
2010
Integrated Medical Emergency Model: an interactive web-based database. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
DATICS-2010: Welcome message from workshop organizers: FutureTech 2010. In: 2010 5th International Conference on Future Information Technology, FutureTech 2010 - Proceedings , Busan, Korea
2010
Design and analysis of a first-order sigma-delta analog-to-digital converter for MEMS resistive sensor. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE) , Malacca, Malaysia
2010
Design of multi-band passive RFID tag antenna. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
Knowledge-based disk scheduling policy using fuzzy logic. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
Identification of Linearized Regions of Non-Linear Transducers Responses. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
Thermal noise generator and injector circuit for data encryption . In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Linearization circuit for transducers for nonlinear reponses. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Design of a low noise amplifier with GaAs MESFET at Ku-Band. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
Analysis of inductive powering harvesting circuit. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE) , Malacca, Malaysia
2010
Design of capacitive measuring systems for high frequency band sensor transducer. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
Design and optimization of linear array antenna based on the analysis of direction of arrival (DOA) estimation and beamforming algorithms. In: International Conference on Computer and Communication Engineering (ICCCE 2010) , Kuala Lumpur
2010
Tuning fork type Ultra Wide Band (UWB) antenna. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Modelling of an Electromagnetic intake & exhaust control hybrid engine. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Differential resistive transducer for power harvesting for implanted devices. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2009
Reconfigurable patch antenna by RF MEMS switches. In: 6th International Symposium on Mechatronics and its Applications (ISMA '09) , Sharjah, UAE
2009
Effects of linear array antenna parameters to the performance of LMS beamforming algorithms . In: Proceedings of the 7th International Conference on Robotics, Vision, Signal Processing & Power Applications (RoViSP 2009) , Langkawi, Malaysia
2009
Reconfigurable patch antenna by RF mems switches. In: International Symposium on Mechatronics and its Applications (ISMA09) , Sharjah
2009
Multivariable transducer interfacing circuit for wireless monitoring of smart implants . In: XIX IMEKO World Congress, Fundamental and Applied Metrology , Lisbon, Portugal
2009
Design of composite right/left-handed (CRLH) transmission line (TL) based leaky-wave array antenna. In: Proceedings of 2009 IEEE International Conference on Antennas, Propagation and Systems (INAS 2009) , Johor Bahru, Malaysia
2009
Rain fade and it's effect analysis for earth-to-satellite microwave link based on measured rainfall statistics in Bangladesh. In: IEEE 9th Malaysia International Conference on Communications (MICC 2009) , Kuala Lumpur Malaysia
2008
A non-contact capacitance type level transducer for liquid characterization. In: International Conference on Computer and Communication Engineering 2008 , Kuala Lumpur, Malaysia
2006
Design of MEMs-based reconfigurable antenna. In: International Conference on MEMS and Nanotechnology (ICMN'06) , Kuala Lumpur