Staff Details

Mohammad Yeakub Ali

Mohammad Yeakub Ali
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 4507
Email address: mmyali@iium.edu.my

Academic Qualification

  • PostGraduate Diploma - Diploma , International Islamic University Malaysia
  • Bachelor in Mechanical Engineering - Bachelor Degree , Bangladesh University of Engineering & Technology, Dhaka
  • Master in Manufacturing Systems Engineering - Masters Degree , Asian Institute of Technology
  • Ph.D in Mechanical Engineering - Doctor of Philosophy , Nanyang Technological University

Area of Specialisation

  • Engineering Tech ~ Applied Sciences And Technologies ~ Nanotechnology ~ Other Nanotechnology n.e.c. - Micromachining, Focused Ion Beam, Microreplication, MicroEDM/WEDM, MEMS, Nanotechnology
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Other Industrial and Manufacturing Engineering n.e.c.
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining)

Professional Membership

  • 1993-2050 The Institution of Engineers, Bangladesh (IEB)
  • 2005-2050 Bangladesh Society of Mechanical Engineers (BSME)
  • 2005-2011 European Society of Precision Engineering and Nanotechnology (euspen)
  • 2008-2011 Materials Research Society of Singapore (MRS-S)
  • 2005-2011 American Society of Mechanical Engineers (ASME)

Teaching Responsibilities

ADVANCED MACHINING PROCESSES 2015/2016
BULK DEFORMATION AND NET SHAPE MANUFACTURING 2016/2017
DESIGN OF MACHINE COMPONENTS 2017/2018
DESIGN OF MACHINE COMPONENTS 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
ENGINEERING DRAWING 2004/2005
ENGINEERING DRAWING 2012/2013 2010/2011 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005
ENGINEERING DRAWING 2010/2011 2009/2010
ENGINEERING MANAGEMENT I 2016/2017
MACHINE DESIGN 2010/2011 2009/2010 2006/2007 2005/2006
MANUFACTURING ENGINEERING LAB III 2016/2017
MANUFACTURING ENGINEERING LAB I 2012/2013
MANUFACTURING ENGINEERING LAB I 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
MANUFACTURING ENGINEERING LAB II 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
MANUFACTURING ENGINEERING LAB II 2011/2012
MANUFACTURING PROCESSES 2013/2014 2012/2013
MECHANICS OF MATERIALS (LAB) 2004/2005
MICRO-MANUFACTURING TECHNOLOGY 2008/2009 2007/2008 2006/2007 2005/2006 2004/2005
MICRO-MESO MANUFACTURING 2015/2016
MICRO-MESO MANUFACTURING 2016/2017 2015/2016 2014/2015 2012/2013 2011/2012 2010/2011 2009/2010
MICROMANUFACTURING TECHNOLOGY 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2011/2012 2010/2011 2009/2010 2008/2009
NON-TRADITIONAL MACHINING PROCESSES 2015/2016
PRECISION ENGINEERING 2017/2018 2016/2017
PROCESSING OF NONMETALLIC MATERIALS 2009/2010 2008/2009 2007/2008 2006/2007
SPECIAL TOPICS IN ADVANCED MANUFACTURING 2005/2006
VIBRATION AND MECHANICS OF MACHINE 2017/2018
VIBRATION AND MECHANICS OF MACHINE 2017/2018 2016/2017
WORKSHOP TECHNOLOGY 2004/2005

Research Projects

Completed

2013 - 2016
Enhancement of Surface Wear Characteristics of Titanium Alloy (Ti-6A1-4V) Using Electrical Discharge Machining (EDM)
2012 - 2015
Prototype Development of Light Weight Aluminium Matrix Composite Automotive Brake Rotor
2012 - 2016
Investigating and Modelling of Focused Ion Beam ( FIB ) Processing Parameters for Optimized Micro / Nano Milling
2012 - 2014
Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid
2012 - 2016
Modelling of Vibration and System Parameters for Stability in Micro End Milling: A Noble Approach
2011 - 2011
Powder Mixed Micro Electro Discharge Machining (PMUEDM)
2011 - 2013
Electro-Discharge Machining of Nonconductive Ceramic Materials
2011 - 2012
Characterization Of Ceramic Materials After Machining By EDM
2011 - 2012
Surface Modification of Work Material Using Powder Metallurgey (P/M) Compacted Electrodes During Electric Discharge Machining (EDM)
2011 - 2015
Scheduling and Reactive Rescheduling for Multi-Stage Multi-Product Batch Processing Industries
2011 - 2014
RU 2011: Characterization of Recast Layer Formed on Ceramic Materials Due to Electro Discharge Machining
2009 - 2011
Influence of Proses parameters on Materials removal rate,Electrode wear and surface Integrity during EDM Miling.
2008 - 2010
Improving the Performance of Electrical Discharge Machining (EDM) in Machining Titanium Alloys by Using Cryogenic Cooling of Electrode
2008 - 2011
Application of Focused Ion Beam for Machining of Nanopillar Sheet.
2008 - 2010
Influence of EDM Process Parameters on Surface Integrity of Machined Parts.
2007 - 2009
Effect of Electrode Configuration on Electrode Wear during Electrical Discharge Machining (EDM)
2007 - 2009
Development of Micro-End Milling Process for Fabricating MEMS
2007 - 2010
High Speed Machining of Aerospace Alloys ? Ti6A14V and Inconel 781
2007 - 2011
Noble Tool Based Micromilling for Nanometric Surface Finish
2006 - 2007
Effect of Cryogenic Grinding on Surface Quality of Mild Steel and Stainless Steel
2006 - 2010
Precise Micromachining with Electrical Discharge Machining (EDM) for Malaysian Industries
2006 - 2008
Geometrical Integrity of Micro-Holes Produced by Micro-EDM
2006 - 2009
Enhancement Of Machinability Of Hardened Steels In End Milling Using Advanced Cutting Methods And Tools
2006 - 2008
Micro-drilling of Metallic Materials for Microsystems Technology
2005 - 2008
Precision Micro-Scaled Partial-Ductile machining of Hard-Brittle Materials for Shortening Polishing Time
2005 - 2008
Fabrication of Microcomponents by Micro Hot Embossing

In Progress

2016 - Present
Improving Machining Performance during Electrical Discharge Machining (EDM) of Stainless Steel with Powder added Dielectric Fluid
2015 - Present
Developing a real time localization system for autonomous robots in flexible manufacturing systems for indoor production environment
2015 - Present
Precision Control of KERF in Micro Wire Electro Discharge Machining with Dry Dielectric Fluid
2015 - Present
Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive
2014 - Present
Noble Approach to Control Vibration using Minimum Quantity Lubrication (MQL) in Micro Milling
2007 - Present
Agile and Sustainable Manufacturing Research Unit (ASMARU)

Award and Recognitions

01-01-2005
Marquis? Who?s Who in the World . Marquis Who's Who - International level.
01-03-2000
OTHERS . Materialography Competition, Institute of Materials (East Asia) - International level.
01-01-1998
OTHERS . Singapore Government - International level.
01-01-1996
OTHERS . DAAD, Germany - International level.
01-12-2007
Research Award (Bronze) . Kulliyyah of Engineering - University level.

Publications

Article

2017
Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME) , 11 (3). pp.208-212.
2017
An experimental investigation of gold coated silicon using nano powder mixed micro-wire electro discharge machining. Procedia Engineering , 184 pp.171-177.
2016
A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics , 6 pp.496-504.
2016
Micro electro discharge machining of non-conductive ceramic using conductive powder mix dielectric fluid. Journal of Engineering and Applied Sciences , 11 (7). pp.1469-1474.
2016
A comparison study on the harmonic balance method and rational harmonic balance method for the Duffing-harmonic oscillator . Global Journal of Pure and Applied Mathematics , 12 (3). pp.2721-2732.
2016
Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces , 23 (6). pp.533-547.
2015
Parametric study of sputtering microchannels via focused ion beam (FIB). ARPN Journal of Engineering and Applied Sciences , 10 (23). pp.17397-17401.
2015
The effects of sliding parameters on dry wear characteristics of Ti-6Al-4V alloy. Advanced Materials Research , 1115 pp.213-216.
2015
Investigation of surface roughness and material removal rate for high speed micro end milling on PMMA. Advanced Materials Research , 1115 pp.12-15.
2015
Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research , 1115 pp.16-19.
2015
Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research , 1115 pp.398-401.
2015
Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research , 1115 pp.207-2012.
2015
Some method on survival analysis via Weibull model in the present of partly interval censored: a short review . International Journal of Computer Science and Network Security (IJCSNS) , 15 (4). pp.48-51.
2015
Analyzing the influence of electrical parameters on EDM process of Ti6Al4V alloy using Adaptive Neuro-fuzzy Inference System (ANFIS). International Review of Mechanical Engineering , 9 (3). pp.237-241.
2015
Material removal rate of zirconia in electro discharge micromachining. Advanced Materials Research , 1115 pp.20-23.
2015
Effect of gap voltage and pulse-on time on material removal rate for electrical discharge machining of Al2O3. Advanced Materials Research , 1115 pp.3-6.
2015
Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research , 1115 pp.243-246.
2015
Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research , 1115 pp.174-177.
2014
Investigation of the machinability of non-conductive zro2 with different tool electrodes in EDM. International Journal of Automotive and Mechanical Engineering (IJAME) , 10 pp.1866-1876.
2014
Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness. The International Journal of Advanced Manufacturing Technology , 75 (1-4). pp.257-267.
2014
Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science pp.1-7.
2014
Investigation of recast layer of non-conductive ceramic due to micro-EDM. Advanced Materials Research , 845 pp.857-861.
2014
Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials , 465 pp.1329-1333.
2014
Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME) , 10 (1). pp.1841-1851.
2014
A review on parametric and nonparametric empirical likelihood method based on interval-censored data . Science International Lahore , 26 (3). pp.977-982.
2014
Effect of peak current on material removal rate for electrical discharge machining of non-conductive Al2O3 ceramic. Advanced Materials Research , 845 pp.730-734.
2013
Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research , 626 pp.537-541.
2013
Investigation of burr in high speed microdrilling . Applied Mechanics and Materials , 278 pp.389-392.
2013
Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method. International Review of Mechanical Engineering , 7 (7). pp.1464-1470.
2013
Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. Applied Mechanics and Materials , 393 pp.246-252.
2013
Tool vibration due to high speed micro end milling parameters. Applied Mechanics and Materials , 372 pp.364-368.
2013
Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp.73-78.
2013
Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic . Procedia Engineering , 56 pp.696-701.
2013
Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering , 53 pp.1-8.
2013
Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy. Journal of Engineering Manufacture , 227 (9). pp.1310-1316.
2013
Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences , 5 (2). pp.91-93.
2013
Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 227 (3). pp.460-464.
2013
Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering , 53 (2013). pp.1-5.
2012
Application of focused ion beam micromachining: a review. Advanced Materials Research , 576 pp.507-510.
2012
Investigation of vibration and surface roughness in micro milling of PMMA. Applied Mechanics and Materials , 217/19 pp.2187-2193.
2012
Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials , 117-19 pp.633-638.
2012
Aluminum-silicon carbide composites for enhanced physio- mechanical properties. Advanced Materials Research , 576 pp.370-373.
2012
Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. Advanced Materials Research , 576 pp.72-75.
2012
Development of a new model for predicting EDM properties of Cu-TaC compact electrodes based on artificial neural network method. Australian Journal of Basic and Applied Sciences , 6 (13). pp.192-199.
2012
Formation of nitrides and carbides on titanium alloy surface through EDM. Advanced Materials Research , 576 pp.7-10.
2012
Rheological and thermal behaviour of high impact polystyrene nanocomposite. Advanced Materials Research , 383 pp.3849-3853.
2012
Determination of influential factors on EDMed surface properties using Plackett-Burman design. World Applied Sciences Journal (WASJ) , 21 (spec ). pp.88-93.
2012
Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate. Advanced Materials Research , 383- pp.1759-1763.
2012
Influence of energy parameters of micro WEDM on kerf. Advanced Materials Research , 576 pp.527-530.
2012
Mechanical performance and water absorption resistance of HIPS/MWCNTs nanocomposite. Advanced Materials Research , 576 pp.421-424.
2012
Applying value stream mapping for productivity improvement of a metal stamping industry. Advanced Materials Research , 576 pp.727-730.
2012
Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research , 576 pp.76-79.
2012
Surface modification by EDM using Co-Cr sintered powder metallurgy electrode. Advanced Materials Research , 576 pp.56-59.
2012
Prediction of minimum chip thickness in tool based micro end milling. International Journal of Integrated Engineering , 4 (1). pp.6-10.
2012
Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences , 6 (12). pp.69-75.
2012
Powder mixed micro electro discharge milling of titanium alloy: analysis of surface roughness. Advanced Materials Research , 341/42 pp.142-146.
2011
Surface modification of titanium alloy through electrical discharge machining (EDM). International Journal of Mechanical and Materials Engineering , 6 (3). pp.380-384.
2011
Investigation of microholes produced by focused ion beam micromachining. Advanced Materials Research , 264 pp.1346-1351.
2011
Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials , 465-66 pp.1329-1333.
2011
Silicon carbide powder mixed micro electro discharge milling of titanium alloy. International Journal of Mechanical and Materials Engineering (IJMME) , 6 (3). pp.338-342.
2011
Fabrication of silicon nanopillar sheet for Cell Culture Dish. Advanced Materials Research , 264 pp.1352-1356.
2011
Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel. Advanced Materials Research , 264-65 pp.1015-1020.
2010
Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering , 7 (1). pp.81-90.
2010
Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing , 11 (5). pp.779-784.
2010
A new approach of applying cryogenic coolant in turning AISI 304 stainless steel. International Journal of Mechanical and Materials Engineering (IJMME) , 5 (2). pp.171-174.
2010
A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing , 11 (1). pp.157-170.
2009
Prediction of burr formation in fabricating MEMS components by micro end milling. Advanced Materials Research , 74 pp.247-250.
2009
A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering , 4 (1). pp.19-23.
2009
Cryogenic grinding of mild steel and stainless steel . International Journal for manfacturing Science and Production , 10 (1). pp.69-74.
2009
Investigation of machining parameters for the multiple response optimization of micro electrodischarge milling. International Journal of Advanced Manufacturing Technology , 43 (3). pp.264-275.
2009
Investigation of machining parameters for the multiple-response optimization of micro electrodischarge milling. The International Journal of Advanced Manufacturing Technology , 43 (3-4). pp.264-275.
2009
Form characterization of microhole produced by microelectrical discharge drilling. Materials and Manufacturing Processes , 24 (6). pp.683-687.
2009
Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling. International Journal of Mechanical and Materials Engineering (IJMME) , 4 (1). pp.93-97.
2009
Investigation of finish cut of microelectrodischarge milling for nanosurface finish . Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures , 27 (3). pp.1330-1334.
2009
Effect of conventional EDM parameters on micromachined surface roughness and fabrication of hot embossing master and microtool. Materials and Manufacturing Processes , 24 (4). pp.454-458.
2009
Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR. International Journal of Mechanical and Materials Engineering (IJMME) , 4 (3). pp.300-308.
2008
Experimental study of conventional wire electrical discharge machining for microfabrication. Materials and Manufacturing Processes , 23 (7). pp.641-645.
2007
Geometrical integrity of micromold cavity sputtered by FIB using multilayer slicing approach. Microsystems Technologies , 13 (1). pp.103-107.
2007
Durability and tribological properties of thermally sprayed wc cermet coating under lubricated rolling-sliding contact. IIUM Engineering Journal , 8 (1). pp.49-62.
2006
Fabricating micromilling tool using wire electrodischarge grinding and focused ion beam sputtering. International Journal of Advanced Manufacturing Technology , 31 (5-6). pp.501-508.
2006
Characterisation of surface texture using AFM with trimmed probe tip . Surface Engineering , 22 (6). pp.443-446.
2003
Mass-replication of micro-components. Forward pp.6-6.
2003
Development of Microreplication Process - Micromolding. Materials and Manufacturing Processes , 18 (5). pp.731-751.
2003
Sidewall surface roughness of Sputtered Silicon 1: surface modelling. Surface Engineering , 19 (2). pp.97-103.
2002
Focused ion beam machining of silicon. Journal of Materials Processing Technology , 127 (2). pp.256-260.
2001
Surface integrity and removal rate of silicon sputtered with focused ion beam. Machining Science and Technology , 5 (2). pp.239-254.
2001
Surface roughness of sputtered silicon. I. surface modeling. Materials and Manufacturing Processes , 16 (3). pp.297-313.
2001
Surface roughness of sputtered silicon. II. Model verification. Materials and Manufacturing Processes , 16 (3). pp.315-329.

Book Section

2011
Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide . InTech , pp.431-452. ISBN 9789533079684.
2011
Developments in EDM process variables. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.70-75. ISBN 9789674181628.
2011
Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.33-37. ISBN 9789674181628.
2011
Investigation of corner radius using micro wire electro discharge machine . In: Manufacturing management from basic machining to quality product . IIUM Press , Kuala Lumpur , pp.82-88. ISBN 9789674181659.
2011
Investigation of minimum chip thickness in micro end milling of PMMA: Experiment and analysis 800 µm diameter tool. In: Manufacturing management from basic machining to quality product . IIUM Press , Kuala Lumpur , pp.11-17. ISBN 9789674181659.
2011
Investigation of MRR for finish cut of titanium alloy using micro electro discharge milling . In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.89-94. ISBN 9789674181628.
2011
Vibration issue in micro end milling . In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.154-158. ISBN 9789674181628.
2011
Micro electro discharge machining of micro pillar array: analysis of surface finish. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.142-147. ISBN 9789674181628.
2011
Micro wire electrical discharge machining of tungsten carbide: analysis of surface roughness. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.124-129. ISBN 9789674181628.
2011
Effect of micro end milling tool diameter on minimum chip thickness. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.113-118. ISBN 9789674181628.
2011
Investigation of TWR for finish cut of titanium alloy using Micro Electro Discharge Milling. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.95-100. ISBN 9789674181628.
2011
Finish cut of titanium alloy using micro electro discharge milling for nano surface finish. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.83-88. ISBN 9789674181628.
2011
Machining of ceramic materials: a review . In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.38-43. ISBN 9789674181628.
2011
Micro electro discharge machining of micro pillar array: process development. In: Advanced Machining Process . IIUM Press , Kuala Lumpur, Malaysia , pp.136-141. ISBN 9789674181628.
2011
Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes . International Islamic University Malaysia , Kuala Lumpur, Malaysia , pp.44-48. ISBN 9789674181628.
2011
Kerf in micro wire electro discharge machining . In: Design for manufacture : Towards improved manufacturability . IIUM Press , Kuala Lumpur , pp.279-285. ISBN 9789674181598.
2011
Investigation of minimum chip thickness in micro end milling of PMMA: experiment and analysis 1.0 mm diameter tool . In: Manufacturing management from basic machining to quality product . IIUM Press , Kuala Lumpur , pp.18-25. ISBN 9789674181659.
2011
Investigation of minimum chip thickness in micro end milling of PMMA: process development. In: Manufacturing management from basic machining to quality product . IIUM Press , Kuala Lumpur , pp.3-10. ISBN 9789674181659.
2011
Fabrication of micro filter by electro discharge machining . In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.159-164. ISBN 9789674181628.
2011
Micro electro discharge machining of micropillar array: analysis of material removal rate. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.148-153. ISBN 9789674181628.
2011
Micro wire electrical discharge machining of tungsten carbide: analysis of material removal rate. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.130-135. ISBN 9789674181628.
2011
Micro wire electrical discharge machining of tungsten carbide: methodology and procedure. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.119-123. ISBN 9789674181628.
2011
Investigation of chip formation and minimum chip thickness in micro/meso milling: Methodology and design of experiment. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.101-106. ISBN 9789674181628.
2011
Micro/meso milling of aluminium alloy 1100: analysis and modelling of minimum chip thickness. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.107-112. ISBN 9789674181628.
2011
Focused ion beam micromachining: technology and application. In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.77-82. ISBN 9789674181628.
2011
Trimming of atomic force microscope probe tip by ion milling . In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 . IIUM Press , Kuala Lumpur , pp.381-385. ISBN 9789670225685.
2010
Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM , Malaysia , pp.92-97.
2009
Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: Proceedings of the Seminar on Research Findings 2008 . IIUM Press , Kuala Lumpur , pp.397-404. ISBN 9789833855780.
2008
Geometrical integrity of microholes drilled by conventional and micro electrical discharge machining. In: Advanced Design and Manufacture to Gain Competitive Edge . Springer , German , pp.731-739. ISBN 9781848002401.
2005
Micro Electro Discharge Milling for Microfabrication. In: Micromachining . In-Tech , Croatia , pp.1-28.

Conference or Workshop Item

2017
Investigation of accuracy in microdrilling with minimum quantity lubrication. In: 7th International Conference on Manufacturing Science and Technology (ICMST 2016) , Sarawak
2017
Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Investigation of kerf in micro wire electro discharge machining. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining. In: 2017 World Congress on Micro and Nano Manufacturing , Kaohsiang, Taiwan
2017
Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017 , Kuala Lumpur
2017
Effects on vibration and surface roughness in high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Dimensional accuracy of micro-electro discharge milling. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Micro wire electro discharge grinding: optimization of material removal rate and surface roughness. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016 , Kulliyyah of Engineering, IIUM, Kuala Lumpur
2016
Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016) , Kuala Lumpur, Malaysia
2016
Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015) , Kuala Lumpur
2016
An experimental investigation of gold coated silicon using nano powder mixed micro-wire electro discharge machining. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016) , Kuala Lumpur
2016
High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014) , Cameron Highland, Pahang
2016
Exploration of EDM assisted CNT in micro machining using statistical approach. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015) , Kuala Lumpur
2015
Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015 , Penang, Malaysia
2015
Confidence interval for survival model based on partly interval-censored data. In: 3rd International Conference on Advances in Engineering Sciences and Applied Mathematics 2015 (ICAESAM 2015) , London, UK
2015
Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. In: International Conference on Functional Materials and Metallurgy, ICoFM 2014 , Pulau Pinang
2013
Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. In: 5th International Conference on Mechatronics (ICOM'13) , Kuala Lumpur, Malaysia
2013
Simulating the electrical and thermal conductivity in EDM die sinking of Cu-TaC compact electrodes using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013 , Kuching, Sarawak
2013
Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) , Kuala Lumpur, Malaysia
2013
The Effect of EDM with external magnetic field on surface roughness of stainless steel. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) , Kuala Lumpur, Malaysia
2012
Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012) , Kuala Lumpur, Malaysia
2012
Determination of influential factors on edmed surface properties using plackett-burman design . In: IIUM Engineering Congress 2012 , Kuala Lumpur, Malaysia
2012
Surface modification by EDM using CO-CR sintered powder metallurgy electrod . In: IIUM Engineering Congress 2012 , Kuala Lumpur, Malaysia
2011
Influence of TaC Powder Additive on electrical discharge machining of stainless Steel. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011) , Batu Pahat, Johor
2011
Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference , Langkawi, malaysia
2011
Minimum chip thickness in machining MEMS structure using Tool Based Micromilling. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011 , Cultural Activity Centre (CAC) and KAED Gallery IIUM
2011
Micro-manufacturing technology: the huge opportunity of thinking small. In: International Conference on Material and Manufacturing Technology , Xiamen, China
2011
Focused Ion Beam Nanomachining of Cell Culture Sheet (softcopy not yet available). In: Seminar on Focused Ion Beam Nanomachining of Cell Culture Sheet , Bangladesh
2011
Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology , Xiamen, China
2011
Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate. In: International Conference on Manufacturing Science and Technology (ICMST 2011) , Singapore
2011
Fabrication of micropillar sheet for cell culture dish. In: Malaysia Technology Expo (MTE 2011) , KLCC
2011
Fabrication of Micropillar Sheet for Cell Culture Dish. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011 , Cultural Activity Centre (CAC) and KAED Gallery IIUM
2011
Nanopillar Array for Cell Culture Dish. In: Seminar Nanopillar Array for Cell Culture Dish , Bangladesh
2010
Fabrication of Bio-MEMS Nanostructure by focused ion beam. In: International Conference on the Advancement of Materials and Nanotechnology , Prince Hotel, Kuala Lumpur
2010
Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish.
2010
Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010 , London
2010
Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel.
2009
Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness . In: Proceedings of the 2009 International Conference on Mechanical and Electrical Technology (ICMET'09) , Beijing
2008
Focused ion beam micromachining of mems. In: International Symposium on Advanced Mechatronics Engineering , Changwon, S. Korea
2008
Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008) , Johor Bahru, Malaysia
2008
Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008) , Johor Bahru, Malaysia
2008
Effect of size and shape of electrodes on the performance of EDM. In: 13th International Conference on Applied Mechanics and Mechanical Engineering , Cairo, Egypt
2008
Microengineering education in IIUM: challenges and successes . In: International Conference on MEMS and Nanotechnology, ICMN'08 , Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia
2008
Influence of micro end milling process parameters on surface roughness. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008) , Johor Bahru, Malaysia
2008
Investigation of finish cut of micro electro discharge milling for nano surface finish. In: International Conference on nanoManufacturing (nanoMan2008) , Singapore
2007
Wire electrical discharge machining for microfabrication. In: International Conference on Mechanical Engineering 2007 (ICME 2007) , Dhaka, Bangladesh
2007
Design and fabrication of micro swiss-roll combustor mold by micro EDM milling. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE) , Culture Activity Centre (CAC), IIUM
2007
Manufacturing engineering education in IIUM. In: Regional Conference on Engineering Education 2007 (RCEE 2007) , Johor Bahru, Malaysia
2007
Surface roughness analysis of beryllium-copper alloy in micro end milling. In: International Conference on Mechanical Engineering (ICME 2007) , Dhaka, Bangladesh
2006
Sputtering of paraboloid microstructure using fib. In: International Conference on MEMS and Nanotechnology (ICMN'06) , Kuala Lumpur, Malaysia
2006
Fabricating hot embossing micro tool using electrodischarge machining. In: International Conference on Manufacturing and Materials Processing 2006 , Kuala Lumpur, Malaysia
2006
An investigation on morphology of hard-brittle silicon surface by diamond grinding. In: International Conference on Manufacturing Science and Technology (ICOMAST 2006) , Melaka, Malaysia
2006
Molding of three-dimensional microcomponents. In: International Conference on Manufacturing Science and Engineering , Michigan, USA
2006
Polymeric micro-fluidic channel by hot embossing. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE) , Culture Activity Centre (CAC), IIUM
2005
Micromilling of tungsten carbide using focused ion beam. In: International Conference on Mechanical Engineering 2005 (ICME2005) , Dhaka, Bangladesh
2005
Developing a prototype micro hot embossing setup. In: 5th International Mechanical Engineering Conference and 10th Annual Paper Meet , Dhaka, Bangladesh
2004
Fabrication of microcomponents by injection molding. In: International Conference on Precision Engineering (ICoPE) 2003/04 , Singapore
2001
Mathematical modeling of sputtering-induced surface roughness. In: International Symposium on Design, Test, Integration, and Packaging of MEMS / MOEMS 2001 , Cannes, France
2001
Micromolding of three-dimensional components. In: Precision Engineering at the Beginning of a Millenium (ICPE) , Yokohama, Japan
2001
Hot embossing and injection molding of three-dimensional microcomponents. In: BSME-ASME International Conference on Thermal Engineering , Dhaka, Bangladesh
2001
Development of a micromolding process. In: International Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2001 , Cannes, France
2001
Surface roughness of FIB sputtered silicon. In: Precision Engineering at the Beginning of a Millenium (ICPE) , Yokohama, Japan
2001
Surface roughness of ion-sputtered micromold. In: International Conference on Mechanical Engineering (ICME) 2001 , Dhaka, Bangladesh
2000
Producing LIGA-competitive microcomponents. In: International Conference on Micromachining and Microfabrication Process Technology VI 2000 , California, USA
2000
Fabrication of micro cavities by micro electrical discharged machining. In: International Conference on Manufacturing (ICM) 2000 , Dhaka, Bangladesh
2000
Simulation of micro-injection molding. In: International Conference on Precision Engineering (ICoPE) 2000 , Singapore
2000
Fabrication of three dimensional micro-components – A review. In: 6th Annual Paper Meet & International Conference on Mechanical Engineering in the 21st Century , Dhaka, Bangladesh
2000
Knowledge-based approach for stretch blow molding. In: International Conference on Precision Engineering (ICoPE) 2000 , Singapore