Staff Details

Abdullah Al-Mamun

Abdullah Al-Mamun
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 5760
Email address: mamun@iium.edu.my

Academic Qualification

  • Bachelor in Civil Engineering - Bachelor Degree , Bangladesh University of Engineering & Technology, Dhaka
  • Master in Environmental Engineering - Masters Degree , Universiti Putra Malaysia (UPM)
  • Ph.D in Environmental Engineering - Doctor of Philosophy , Universiti Putra Malaysia (UPM)

Area of Specialisation

  • Natural Science ~ Environmental Sciences ~ Environmental Issues and Assesment ~ Water Quality Simulation Modelling - Urban stormwater management.
  • ICT ~ Information, Computer And Communications Technology (ICT) ~ Computation Theory and Mathematics ~ Simulation and Modeling - Hydrological analyses and computer simulation.
  • Engineering Tech ~ Engineering And Technology ~ Civil Engineering ~ Water Resources Management/ Integrated Water Resources Management - Integrated water resources management.
  • Natural Science ~ Environmental Sciences ~ Environmental Issues and Assesment ~ Water Pollution - Water quality and pollution control (point and diffuse sources).

Professional Membership

  • 2010-2015 ARPA Press
  • 2013-2015 IDP Coordinator, Dept. of Biotech Eng
  • 2013-2014 FYP 2 Coordinator, IIUM
  • 2012-2013 IIUM
  • 2012-2013 FYP 1 Coordinator, IIUM

Teaching Responsibilities

AIR POLLUTION CONTROL TECHNOLOGY 2010/2011 2009/2010 2006/2007
BIOTECH. ENGINEERING LAB III 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
BIOTECHNOLOGY ENGINEERING LAB IV 2014/2015 2013/2014 2012/2013
BIOTECHNOLOGY ENGINEERING LAB IV 2014/2015 2013/2014
CIVIL ENGINEERING LAB II 2017/2018
DRINKING WATER QUALITY & TREATMENT PROCESSESS 2014/2015 2010/2011
ENVIRONMENTAL BIOTECHNOLOGY 2007/2008 2006/2007 2005/2006
ENVIRONMENTAL ENGINEERING 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
INTEGRATED DESIGN PROJECT 2014/2015 2013/2014
INTRODUCTION TO ENVIRONMENTAL ENGINEERING 2015/2016 2013/2014 2012/2013
MOLECULAR BIOLOGY & BIOCHEMICAL TECH. 2007/2008 2006/2007
PROJECT I 2012/2013 2011/2012
PROJECT II 2013/2014 2007/2008 2006/2007
SOLID WASTE ENGINEERING 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013
SOLID WASTE ENGINEERING 2012/2013 2011/2012 2010/2011 2009/2010
STATICS 2016/2017
STATICS 2016/2017
WASTE MANAGEMENT ENGINEERING 2014/2015 2013/2014
WASTEWATER RECLAMATION AND REUSE 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2008/2009 2007/2008
WATER RESOURCES AND HYDROLOGY 2017/2018 2016/2017

Research Projects

Completed

2015 - 2015
THE DETAIL DESIGN OF RIVER IMPROVEMENT WORKS AND DETENTION POND FOR THE PROPOSED PROJEK PEMBANGUNAN PUSAT KECEMERLANGAN LEMBAGA GETAH MALAYSIA
2015 - 2015
Kajian Hybrid off River Augmantation Storage (HORAS) di Kg. Sg. Darah, Bestari Jaya Sebagai Sumber Air Untuk Tujuan Bekalan Air
2015 -
Feasibility Study for Proposed Water Treatment Plant in Labohan Dagang,Daerah Kuala Langat ,Selangor Darul Ehsan.
2014 - 2016
Swan Lake, Engineered Wetland and Signature Lake at East Ledang, Mukim Pulai, Johor
2012 - 2016
Consultancy Services for the Updating/Preparation of the Storm Water Drainage Master Plan for Dhaka City, Dhaka Water Supply and Sanitation Project (DWSSP)
2012 - 2016
Development of National Event Mean Cencentration (EMC) of Storm Runoff Quality Database for the Non-Point Source Pollution Control from Highways in Malaysia
2012 - 2015
Optimization of Colour Removal from Palm Oil Mill Effluent (POME) by Nanomaterials
2012 - 2014
Penyediaan Data-Data Hujan dari Stesen Manual (Daily Data) kepada Hujan dengan Interval Hourly untuk Tujuan Rekabentuk Projek Tebatan Banjir
2011 - 2012
Design of a Sand Filter for Recycling Ablution Water from IIUM Majid
2010 - 2011
Preparation of Urban Storm Water Management Planning and Design Standard For Malaysia and 2nd Edition of Urban Storm Water Management Manual For Malaysia
2010 - 2010
Consultancy Services for the Detailed Design and Preparation of Tender Document Flood Mitigation in Setiu River in Terengganu
2009 - 2010
Upgrading of Jimah River System for Flood Mitigation
2009 - 2012
(RU 2011): Characterization,Composing and Management of food and garden Wastes:IIUM as a case study.
2009 - 2010
Water Quality Sampling, Testing, Inventory and River Quality Improvement Option for Buloh River
2009 - 2010
Adsorption of Heavy Metals from Industrial Wastewater using Carbon Nanomaterial Grown on Granular Activated Carbon
2009 - 2010
Study and Detailed Design of Stormwater Detention Pond for Ayer Salak River in Malacca
2008 - 2011
Development of An Integrated Water-Level Sensor and Data Logger System
2008 - 2012
Development of Decision Support System to Manage Severe Floods in Kuala Lumpur and Selangor
2008 - 2011
Improvement of the Existing Water Quality Indices (WQI) for Various Usages in Malaysia
2008 - 2009
Flood Mitigation Masterplan Study for Mersing River Basin
2008 - 2009
River Water Quality Trends and Indexes in the Peninsular Malaysia
2008 - 2008
Preparation of Irrigation and Drainage Manual for Malaysia
2007 -
Palm Oil Mill Effluent as Renewable Resource for Bioethenol Production by Single-Step Bioconversion
2007 - 2009
Optimization of Extraction Process for Useful Bound and Free Bioactive Compounds from Oil Palm Industrial Wastes
2007 - 2008
Preparation of Irrigation and Drainage Manual for Malaysia
2007 - 2007
Rehabilitation and Water Treatment of Penang River - Study and Detailed Design
2007 - 2011
CHARACTERIZATION OF SULLAGE
2006 - 2012
Production of Carbon Nanomaterials and Application in Removal of Toxic Heavy Metals From Water and Wastewater
2006 - 2007
Upgrading of Simin River System for Flood Mitigation
2006 - 2007
Detailed Design of Community Pond at Taman Ria, Sungai Petani, Kedah Darul Aman
Study on Vulnerability and Adaptation of Climate Change Impacts on Floods in Selected River Basins

In Progress

2016 - Present
Rekabentuk Terperinci Rancangan Tebatan Bandar Merlimau, Melaka
2015 - Present
Investigation of Indigenous Biofilm Technology for Simultaneous Pretreatment and Enhanced Biogas Production From Palm oil Mill Effluent
2004 - Present
Bio-Environmental Engineering Research Centre (BERC)

Award and Recognitions

02-12-2008
Bronze Medal . Malaysian Technology Expo - National level.
01-12-2008
Bronze Medal . Engineering Research and Innovative Exhibition - University level.
01-12-2008
Gold Medal . Engineering Research and Innovative Exhibition - University level.
12-12-2006
Silver Medal . Engineering Research and Innovative Exhibition - University level.
12-12-2005
Silver Medal . Engineering Research and Innovative Exhibition - University level.

Publications

Article

2017
A brief account of river rehabilitation experiences. IIUM Engineering Journal , 18 (1). pp.12-41.
2017
Challenges in the rehabilitation of the Pusu River. International Journal of Conservation Science , 8 (1). pp.121-130.
2016
Physical risk assessment for urban water supply in a developing country: A case of Mega City Dhaka. Engineering Journal , 20 (3). pp.23-32.
2016
Synthesis and characterization of carbon nanofibers grown on powdered activated carbon.. Journal of Nanotechnotechnology , 2016 pp.1-10.
2016
Impact of improper landuse changes on flash flood and river system – a case of Sg. Pusu. ARPN Journal of Engineering and Applied Sciences , 11 (8). pp.5372-5379.
2016
Removal of cadmium from water by CNT–PAC composite: effect of functionalization. NANO: Brief Reports and Reviews , 11 (1). pp.1650011-1.
2016
Impact of improper land use changes on flash flood and river system: a case of Sg Pusu. ARPN Journal of Engineering and Applied Sciences , 11 (8). pp.5372-5379.
2016
Synthesis of carbon nanofibers on impregnated powdered activated carbon as cheap substrate. Arabian Journal of Chemistry , 9 (4). pp.532-536.
2016
Impediments to river rehabilitation. Environmental Quality Management , 26 (2). pp.5-21.
2016
White popinac as potential phyto-coagulant to reduce turbidity of river water.. AARPN Journal of Engineering and Applied Sciences , 11 (11). pp.7180-7183.
2016
Fungal flocculants to reduce turbidity of river water. ARPN Journal of Engineering and Applied Sciences , 11 (6). pp.4094-4099.
2016
Adapt engineering theory in universal design for developing countries: a literature review. Journal of Universal Design in the Built Environment (JUDBE) , 2 (2). pp.61-72.
2015
Upgrading of small sewage treatment plants for ammonia removal - case of a university campus. ARPN Journal of Engineering and Applied Sciences , 10 (23). pp.17391-17396.
2015
Evaluation of entrapment potentiality and turbidity removal efficiency of fungi. Jurnal Teknologi , 77 (24). pp.23-28.
2015
Lead sorption by carbon nanofibers grown on powdered activated carbon — kinetics and equilibrium. NANO: Brief Reports and Reviews , 10 (2). pp.1550017-1.
2015
Development of electronic rain gauge system. International Journal of Electronics and Electrical Engineering , 3 (4). pp.245-249.
2015
A shift-share analysis of electrical and electronic products: an overview and assessment of export growth of Malaysia. Asian Social Science , 11 (10). pp.330-338.
2015
Efficient lead sorption from wastewater by carbon nanofibers. Environmental Chemistry Letters , 13 (3). pp.341-346.
2015
Phytoremediation and mathematical model for domestic wastewater by Chlorella vulgaris. Advances in Environmental Biology , 9 (14). pp.139-144.
2014
Application of response surface methodology (RSM) for optimization of color removal from POME by granular activated carbon. International Journal of Environmental Science and Technology , xx (xx). pp.1-8.
2014
Characterization of storm runoff quality from a highway in Selangor and conceptual design of constructed Wetland. Advances in Environmental Biology , 8 (3). pp.810-814.
2014
Potential aspergillus niger strain for the production of phenolics from a novel source palm oil mill effluent. Journal of Pure and Applied Microbiology , 8 (1). pp.803-808.
2014
Treatment of used ablution water from IIUM Masjid for reuse. Advances in Environmental Biology , 8 (3). pp.558-564.
2013
Sustainable river water quality management in Malaysia. IIUM Engineering Journal , 14 (1). pp.29-42.
2012
Processing of date palm kernel (DPK) for production of edible jam. Australian Journal of Basic and Applied Sciences , 6 (1). pp.22-29.
2012
Development of process conditions to optimize the extraction of bio-disinfectant from Neem Leaf (Azadirachta Indica). Advances in Natural and Applied Sciences , 6 (5). pp.682-686.
2012
Regional Statistical Models for the Estimation of Flood Peak Values at Ungauged Catchments: Peninsular Malaysia. Journal of Hydrologic Engineering , 17 (4).
2011
Development of culture inoculum for scale-up production of citric acid from oil palm empty fruit bunches by aspergillus niger. Procedia Environmental Sciences , 8 pp.396-402.
2011
Adsorption of heavy metal from landfill leachate by wasted biosolids. African Journal of Biotechnology , 10 (8). pp.18869-18881.
2011
Growth of carbon nanomaterial on granular activated carbon . Advanced Materials Research , 264 pp.535-541.
2011
Synthesis of various carbon nanomaterials (CNMs) on powdered activated carbon. African Journal of Biotechnology , 10 (81). pp.18892-18905.
2011
Heavy metals removal from synthetic wastewater by a novel nano-size composite adsorbent. International Journal of Environmental Science and Technology , 8 (4). pp.799-806.
2010
Statistical optimization of process parameters for the production of citric acid from oil palm empty fruit bunches. African Journal of Biotechnology , 9 (4). pp.554-563.
2010
Regionalisation of low flow frequency curves for the Peninsular Malaysia. Journal of Hydrology , 381 (1-2). pp.174-180.
2010
Adsorption of copper, nickel and lead ions from synthetic semiconductor industrial wastewater by palm shell activated carbon. International Journal of Environmental Science and Technology , 7 (4). pp.751-758.
2010
Estimation of 1-day extreme rainfall by Hershfield Method for Klang River basin in Malaysia.. International Journal of Arts and Sciences , 3 (9). pp.383-394.
2010
Solid state bioconversion of oil palm empty fruit bunches for production of citric acid by wild strains of Aspergillus niger. Food Biotechnology , 24 (1). pp.19-36.
2010
Effect of particle size on production of citric acid from oil palm empty fruit bunches as new substrate by wild Aspergillus niger . Journal of Applied Sciences , 10 (21). pp.2648-2652.
2010
Study of Pb adsorption by carbon nanofibers (CNFs) grown on powdered activated carbon. Journal of Applied Sciences , 10 (17). pp.1983-1986.
2010
Clean production of carbon nanomaterials to remove arsenic from drinking water. OIDA International Journal of Sustainable Development , 1 (7). pp.45-52.
2009
Solid state bioconversion of oil palm empty fruit bunches for cellulase enzyme production using a rotary drum bioreactor. Biochemical Engineering Journal , 46 (1). pp.61-64.
2009
Lead removal by using carbon nanotubes . International Journal of Nanoparticles , 2 (1-6). pp.329-338.
2009
Kinetic adsorption of application of carbon nanotubes for lead Pb (II) removal from aqueous solution. Jouranl of Environmental Sciences , 21 (4). pp.539-544.
2009
Improvement of production of citric acid from oil palm empty fruit bunches: Optimization of media by statistical experimental designs. Bioresource Technology , 100 (12). pp.3113-3120.
2009
Lead removal by using carbon nanotubes. International Journal of Nanoparticles , 2 (1-6). pp.329-338.
2009
Kinetic adsorption of application of carbon nanotubes for Pb(II) removal from aqueous solution. Journal of Environmental Sciences-China , 21 (4). pp.539-544.
2009
Untreated sullage from residential areas - a challenge against inland water policy in Malaysia. Pollution Research , 28 (2). pp.279-285.
2009
Optimisation of arsenic adsorption from water by carbon nanofibers grown on powdered activated carbon impregnated with nickel.. Journal of Applied Sciences , 9 (17). pp.3180-3183.
2008
Treatment of POME by pilot plant anaerobic fluidised bed reactor. IIUM Engineering Journal , 9 (1). pp.9-17.
2007
Enzymatic biodegradability behavior of poly (methyl methacrylate) grafted sago starch biopolymer. IIUM Engineering Jorunal , 8 (2). pp.37-45.
2005
The importance of sullage (grey-water) treatment for the restoration and conservation of urban streams. International Journal of River Basin Management , 3 (3). pp.223-227.
2004
Generalised long duration probable maximum precipitation (PMP) isohyetal map for Peninsular Malaysia. Journal of Spatial Hydrology , 4 (1 (Spring)). pp.1-15.

Book

2012
Comparing metals adsorption by carbon adsorbents: evaluating absorption properties of different carbon adsorbents. LAP Lambert Academic Publishing , Kuala Lumpur . ISBN 9783848414956.

Book Section

2011
Screening of lignocellulosic materials for the production of fermentable sugar. In: Current research and development in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.72-76. ISBN 9789674181505.
2011
Regeneration of Carbon Nano Tubes (CNT) in cadmium sorption from water. In: Advances in nanotechnology & its application . IIUM Press , Kuala Lumpur , pp.98-113. ISBN 9789670225876.
2011
Removal of colour from palm oil mill effluent using Granular Activated Carbon (GAC) . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.224-231. ISBN 9789674181369.
2011
Performance of CNTS column in removing lead from water . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.63-67. ISBN 9789674181369 .
2011
Carbon nanofibers to remove nickel . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.50-53. ISBN 9789674181369.
2011
Carbon nanotubes to remove chromium . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.32-37. ISBN 9789674181369.
2011
Production of fermentable sugar from lignocellulosic materials using statistical design . In: Current research and development in biotechnology engineering at IIUM (volume 1) . IIUM Press , Kuala Lumpur , pp.225-230. ISBN 9789674181505.
2011
Adsorption Isotherm of Carbon Nanotubes in removing heavy metals. In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.44-49. ISBN 9789674181369.
2011
Water sampling and testing for nonpoint source pollution load estimation in Malaysia. In: Recent advances in bioenvironmental engineering . IIUM Press , Kuala , pp.174-197. ISBN 9789670225852.
2011
Application of carbon nanotubes impregnated on activated carbon for cadmium removal from aqueous solution . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.109-116. ISBN 9789674181369.
2011
Adsorption of cadmium by CNTS grown on GACS . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.59-62. ISBN 9789674181369.
2011
Carbon nanotubes to remove nickel. In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.38-43. ISBN 9789674181369.
2011
Carbon nanofibers to remove arsenic . In: Current research and developments in biotechnology engineering at IIUM . IIUM Press , Kuala Lumpur , pp.26-31. ISBN 9789674181369.

Conference or Workshop Item

2016
Fungal coagulant for reduction of water turbidity. In: 3rd International Conference on Civil, Biological and Environmental Engineering (ICBEE-2016) , Bali, Indonesia
2016
Screening of nutrients for improving flocculation performance of fungal bio-flocculants. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Development of enzymatic pretreatment of palm oil mill effluent for monomers towards biogas production. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Ethics in engineering research: an Islamic perspective. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Application of pond to improve river water quality. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Optimization of flocculation process for a new myco-coagulant to reduce water turbidity. In: Regional Conference on Science Technology and Social Sciences 2016 (RCSTSS 2016) , Cameron Highlands Pahang
2016
Optimization of flocculation process by microbial coagulant in river water. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Production of citric acid from empty fruit bunches through solid state bioconversion by using rotary drum bioreactor with Aspergillus niger. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Biocoagulant from bacteria: a review. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2015
Engineering education focusing on environmental management in Malaysia. In: FEIIC-International Conference on Engineering Education and Research (FICEER 2015) , Madinah, Kingdom of Saudi Arabia
2014
Challenges in non-point source pollution — Sampling and testing. In: 5th Brunei International Conference on Engineering and Technology 2014 (BICET 2014) , Brunei Darussalam
2013
Heavy metal contents in highway runoff in Malaysia. In: 4th Global Engineering, Science and Technology Conference , Dhaka, Bangladesh
2013
Initial assessment of runoff quality from a road and highway in Klang Valley. In: 3rd International Conference on Biotechnology Engineering (ICBioE’13) , Berjaya Times Square Hotel, Kuala Lumpur
2013
Relationship between short duration and daily rainfall data in Kuala Lumpur. In: Persidangan Kebangsaan Geografi & Alam Sekitar kali ke 4 , Tanjung Malim, Perak
2013
Heavy metal contents in highway runoff in Malaysia. In: 4th Global Engineering, Science and Technology Conference 2013 , BIAM Foundation, 63 New Eskaton, Dhaka, Bangladesh
2013
Adsorption of cadmium from water by wasted biosolids. In: International Conference on Green Chemical Engineering & Technology (GCET 2013) , Melaka, Malaysia
2013
Reuse potential of ablution water from IIUM masjid. In: Proceedings of the International Conference on Biotechnology Engineering, ICBioE, ‘13 , Kuala Lumpur, Malaysia
2012
Kinetics of cadmium adsorption by CNTs grown on PACs. . In: International Conference on Nanotechnology, ICONT 2012 , Pahang
2012
Phytoremediation of partially treated wastewater by chlorella vulgaris . In: International Conference on Chemical Processes and Environmental Issues, ICCPEI 2012 , Singapore
2011
Development of culture inoculum for scale-up production of citric acid from oil palm empty fruit bunches by Aspergillus niger. In: International Conference on Environment Science and Biotechnology (ICESB 2011) , Maldives
2011
Urban runoff quantity and quality control – Malaysian perspective. . In: 46th Central Canadian Symposium on Water Quality Research.
2011
Performance of reactivated carbon nanotubes in adsorbing cadmium from aqueous solution . In: 46th Central Canadian Symposium on Water Quality Research , Ontario, Canada
2011
Adsorption of heavy metal from landfill leachate by wasted biosolids. In: International Conference on Biotechnology Engineering, ICBioE’11, IIUM Engineering Congress , Legend Hotel, Kuala Lumpur, Malaysia
2011
Environmental engineering education for sustainable development in IIUM. In: 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE’11) , Kuala Lumpur
2011
Water supply and sanitation in Dhaka City. . In: 46th Central Canadian Symposium on Water Quality Research , Ontario
2011
Statistical modelling of nonpoint source pollution from a ropical urban residential area. In: 46th Central Canadian Symposium on Water Quality Research , Ontario
2011
Various Carbon Nanomaterials (CNMs) synthesized on powdered activated carbon by CVD reactor. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011) , The Legend Hotel, Kuala Lumpur
2010
Processing of date palm kernel(DPK)for production of Edible Jam. In: International Conference on Applied Biotechnology (ICAB 2010), Friendship Hall, Khartoum, Sudan , Friendship Hall, Khatroum, Sudan
2010
Modification of CDV reactor for carbon nanomaterialns production. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Surface modification of activated carbon for enhancement of heavy metals adsorption.. In: 2nd International Conference on Environmental Research and Technology (ICERT). , Penang, Malaysia
2010
Optimization of synthesis of carbon nanotubes on iron impregnated activated carbon. In: 24th Symposium of Malaysian Chemical Engineers (SOMChE 2010) and 1st International Conference on Process Engineering and Advanced Materials 2010 (ICPEAM2010). , Kuala Lumpur
2010
Adsorption of lead from aqueous solution by a novel carbon based adsorbent. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
High yield Cellulosic Citric Acid. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010) , IIUM, Kuala Lumpur
2010
Production of Citric Acid from Oil Palm Empty Fruit Bunches by Solid State Bioconversion using Local Aspergillus niger. In: National Biotechnology Seminar 2010 , PWTC, Kuala Lumpur
2010
Effect of adsorbate initial concentration on the removal of Pb from aqueous solutions by carbon nanofibers . In: 24th Symposium of Malaysian Chemical Engineers (SOMChE 2010) and 1st International Conference on Process Engineering and Advanced Materials 2010 (ICPEAM2010). , Kuala Lumpur
2009
Improvement of existing water quality index in Selangor, Malaysia.. In: 2nd International Conference on Water & Flood Management (ICWFM) , Dhaka
2009
Adsorption of chromium from water by carbon nanotubes grown on powdered activated carbon. In: International Conference on Sustainable Infrastructure and Built Environment in Developing Countries - SIBE, , Bandung, Indonesia
2009
Kinetics of solid state bioconversion for the production of Citric Acid from oil palm empty fruit bunches (abstract only). In: International Conference on Chemical and Bioprocess Engineering , UMS
2009
Effect of particle size on production of citric acid from oil palm empty fruit bunches as new substrate by wild aspergillus niger. In: 3rd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2009) , Kota Kinabalu, Sabah, Malaysia
2009
Optimisation of arsenic adsorption from water by carbon nanofibres grown on powdered activated carbon impregnated with nickel . In: 3rd International Conference on Chemical and Bioprocess Engineering , Sabah
2009
The formation of carbon nanofibers on powdered activated carbon impregnated with nickel.. In: International Conference on Nanoscience and Nanotechnology , Selangor, Malaysia
2009
Metal removal from industrial wastewater by a novel carbon nanomaterial. . In: Environmental Science and Technology Conference - ESTEC , Kuala Terengganu, Malaysia
2009
Lignocellulolitic enzymes production: an important phenomenon for the production of citric acid from lignocellulosic substrate through solid state bioconversion. In: International Conference on Solid Waste Management Technical, Environmental and Socio-economical Contexts - WasteSafe 2009 , Khulna, Bangladesh
2009
Adsorption of Zn from aqueous solution by activated carbon derived empty fruit bunches: Statistical approach. In: Singapore International Water Week 2009 , Singapore
2008
Evaluation of fungal mixed cultures for production of citric acid using empty fruit bunches by solid state bioconversion. In: 2nd International Conference on Advancement in Science and Technology (iCAST), , Kuantan
2008
Effect of pretreatment on production of citric acid from oil palm empty fruit bunches as substrate by wild aspergillus niger. In: 22nd Symposium of Malaysian Chemical Engineers (SOMChE 2008) , Kuala Lumpur
2008
Production of citric acid by local isolates Aspergillus niger through solid state bioconversion of oil palm empty fruit bunches. In: 58th Canadian Chemical Engineering Conference , Ottawa, Canada
2007
Citric acid from renewable raw material oil palm biomass. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007) , Cultural Activity Centre (CAC), IIUM
2007
Optimization of process parameters to maximize the extraction of disinfectant from betel leaf. In: Kulliyyah of Engineering Research and Innovation Exhibition (KERIE 2007) , Cultural Activity Centre (CAC), IIUM
2007
Optimization of operating conditions of rotary drum bioreactor for lignin peroxidise production by solid state . In: World Engineering Congress , Penang