Staff Details

Md. Abdul Maleque

Md. Abdul Maleque
Designation: Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 5785
Email address: maleque@iium.edu.my

Academic Qualification

  • Bachelor of Science in Metallurical Engineering - Bachelor Degree , Bangladesh University of Engineering & Technology, Dhaka
  • Master of Science in Metallurgical Engineering - Masters Degree , Bangladesh University of Engineering & Technology, Dhaka
  • Ph.D in Materials - Doctor of Philosophy , Universiti Malaya (UM)

Area of Specialisation

  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Other Engineering Materials n.e.c. - Materials for automotive and energy;
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Other Engineering Materials n.e.c. - Materials characterization
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Composite Materials - Advanced composite for automotive brake rotor
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Metals and Metal Alloy Materials - Surface modification of metallic material
  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Industrial Tribology - Bio-tribology, tribo-corrosion

Professional Membership

  • 2016-2020 Section Editor, Elsevier Ltd
  • 2016-2019 IIUM
  • 2016-2019 A D Publication
  • 2015-2018
  • 2013-2018 UMP

Teaching Responsibilities

ADVANCED COMPOSITE MATERIALS 2017/2018 2015/2016
ADVANCED COMPOSITE MATERIALS 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
ADVANCED MATERIALS CHARACTERIZATION 2016/2017
ADVANCED MATERIALS CHARACTERIZATION 2015/2016 2014/2015 2010/2011 2009/2010
ADVANCED METALLIC MATERIALS 2016/2017
FOUNDRY JOINING 2013/2014
INTEGRATED DESIGN PROJECT 2017/2018 2016/2017 2015/2016
MANUFACTURING ENGINEERING LAB I 2010/2011 2009/2010
MATERIALS LABORATORY I 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
MATERIALS PROCESS DESIGN 2003/2004
MATERIALS SELECTION AND DESIGN 2017/2018
MATERIALS SELECTION AND DESIGN 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
MATERIALS SELECTION AND DESIGN 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
POWDER METALLURGY 2009/2010
POWDER METALLURGY 2017/2018 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
POWDER METALLURGY 2016/2017 2015/2016 2014/2015 2013/2014
PRODUCTION OF FERROUS AND NON-FERROUS 2009/2010
PROJECT II 2013/2014 2012/2013
SEMINAR 2003/2004
SEMINAR 2012/2013
SEMINAR 2012/2013
SEMINAR I 2012/2013 2011/2012 2010/2011
SEMINAR II 2012/2013
SMART MATERIALS 2003/2004
SURFACE ENGINEERING AND TRIBOLOGY 2015/2016

Research Projects

Completed

2012 - 2015
Prototype Development of Light Weight Aluminium Matrix Composite Automotive Brake Rotor
2012 - 2014
Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid
2012 - 2016
Characterization of Tribo-Corrosion using Jatropha Curcas Linnaeas Biodiesel for Automotive Engine Compenent Materials
2011 - 2012
Thermo-Mechanical Properties of Al-Cu Matrix Composite with Varying Particle Size SiC Reinforcement for The Application of Automotive Piston
2011 - 2013
Electro-Discharge Machining of Nonconductive Ceramic Materials
2011 - 2012
Characterization Of Ceramic Materials After Machining By EDM
2011 - 2017
Erosion Corrosion and Tribological Behaviour of TIG Torch Processed Composite Layers
2011 - 2014
RU 2011: Characterization of Recast Layer Formed on Ceramic Materials Due to Electro Discharge Machining
2010 - 2016
Cladding of Low Alloy Steel Surfaces with Superalloy via TIG Torch Melting Technique
2010 - 2011
The development of an optimum material selection and conceptual design process for automotive piston-cylinder liner
2010 - 2012
Effect of Inhibitors on the Corrosion of Automotive Materials under Palm Oil Biodiesel
2010 - 2013
Fundamental Study of New Eco-core Metal Matrix Composite Sandwich Structure
2009 - 2010
Reverse Engineering of Child Bicycle
2009 - 2011
Simulation and Fabrication of SiC Reinforced Aluminium Metal Matrix Composite (SiC-AMC)Automotive Brake rotor

In Progress

2015 - Present
Precision Control of KERF in Micro Wire Electro Discharge Machining with Dry Dielectric Fluid
2015 - Present
Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive
2015 - Present
Surface Coating of Duplex Stainless Steel Using Nitriding and TIG Torch Melting Techniques - A Comparative Study
2014 - Present
Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene
2009 - Present
Advanced Materials and Surface Engineering (AMSERU)

Award and Recognitions

18-12-2016
Section Editor of Encyclopedia on Renewable and Sustainable Materials . Elsevier Ltd - International level.
13-12-2016
Section Editor . Elsevier Int. - International level.
08-11-2016
Session Chair for AMPT 2016 . University Malaya - International level.
01-07-2016
Editorial Board Member . J of Materials & Manufacture, Deer Hill Pubr - International level.
01-06-2016
Associate editor International Journal of Multidisciplinary Design, Analysis and Optimization, . A D Publication - International level.
01-06-2016
Judge for Tribology Poster Competition . University of Malaya - International level.
22-10-2015
Session Chair for ICBTS 2015 at Berlin Germany . ICBTS - International level.
18-08-2015
Session Chair . UMP - International level.
11-06-2014
Bronze . IIUM - International level.
15-02-2014
Internationalisation Bureau . MYTRIBOS - International level.
02-12-2013
Guest editor, Special issue of Procedia Engineering . Elsevier Ltd, UK - International level.
09-05-2013
Silver Award from 24thInternational Invention & Innovation Technology Exhibition (ITEX) . Malaysian Invention & Design Society (MINDS) - International level.
30-05-2005
Editorial Board Member of Int J. of Indust Lubr & Trib., . Emerald Pubr., UK - International level.
10-04-2017
Sijil Penghargaan . SIRIM - National level.
15-03-2017
Juri Hakim (Judge Panel) . University Malaysia Pahang - National level.
18-02-2017
The Invention and Innovation Award (Gold) . Malaysian Association of Research Scientist (MARS) - National level.
16-02-2017
Bronze Award for innovation/invention . Malaysian Associations of Research Scientist - National level.
16-02-2017
Gold Medal Award for innovation/invetion . Malaysian Associations of Research Scientist - National level.
06-02-2017
Sijil Penghargaan . SIRIM STS Sdn Bhd - National level.
01-02-2017
Evaluation Panel member for FRGS Application . UMP - National level.
21-11-2016
Examiner for Peperiksaan Lisan . University Malaysia Pahang - National level.
29-03-2016
MOHE Panel for Research Grant Evaluation . Ministry of Education - National level.
06-12-2015
Silver Award . Ministry of Higher Education - National level.
05-10-2015
Speaker at MTDC-SYMBIOSIS Program . Malaysian Technology Development Corporation (MTDC) - National level.
07-09-2015
Advisory Member of ICoFM . Universiti Malaysia Perlis - National level.
15-08-2015
Session Chair of ICMER15 . University Malaysia Pahang - National level.
15-07-2011
Sijil Penghargaan . SIRIM Berhad - National level.
15-07-2011
Sijil Penghargaan . SIRIM Berhad - National level.
01-07-2011
Sijil Penghargaan . SIRIM Berhad - National level.
29-08-2016
Chief Editor of Engineering Research with Ethics and Values . International Islamic University Malaysia - University level.
28-03-2016
IIUM Panel Evaluator . International Islamic University Malaysia - University level.
02-10-2015
IRIIE 2015 Gold Medal Award . IIUM - University level.
02-10-2015
Gold award . International Islamic University Malaysia - University level.
18-07-2014
Quality Award . IIUM - University level.
29-04-2014
Highest Citation in Citation Index Journal Award . IIUM - University level.
14-03-2013
Quality Award . IIUM - University level.
19-02-2013
Two (2) Gold medal for exhibiting outstanding research finding to the IRIIE2013, IIUM . IIUM - University level.
27-02-2012
Silver Award . IIUM - University level.
27-02-2012
Bronze Award . IIUM - University level.
01-03-2011
Bronze Medal . IIUM - University level.
01-03-2011
Bronze Medal . IIUM - University level.
26-01-2010
OTHERS . RMC, IIUM - University level.
18-06-2003
Anugerah Khidmat Cemerlang (Menegak) . Universiti Malaya - University level.
12-03-1999
Sijil Dekan . Faculty of Engineering, UM - University level.
10-02-2017
Assessor Research Grant . Kulliyyah of Engineering - KCDIO level.
01-09-2016
Panelist for foroum on 'Islamization of Engineering Education . Kulliyyah of Engineering - KCDIO level.
21-10-2015
Judge for KERIE . KOE - KCDIO level.
27-10-2014
Panelist . KOE - KCDIO level.
23-09-2014
Keynote Speaker . KOE, IIUM - KCDIO level.
13-06-2014
Judge for KERIE13 . KOE, IIUM - KCDIO level.
13-02-2013
Reviewer for ERGS grant . KOE, IIUM - KCDIO level.

Publications

Article

2017
Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering , 184 pp.012031-1-8.
2017
Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis , 14 (2 (Thematic Issue)). pp.227-232.
2017
Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology
2016
Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites. e-Polymers , 16 (4). pp.323-329.
2016
Mechanical properties of oil palm shell composites. International Journal of Polymer Science , 2016 pp.1-7.
2016
Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp.1758-1764.
2016
Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces , 23 (6). pp.533-547.
2016
Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels , 30 (1). pp.334-343.
2016
Microstructural aspects of wear behaviour of TiC coated low alloy steel. Materials Science and Technology , 32 (4). pp.303-307.
2016
Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture , 1 (1). pp.21-26.
2016
Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. Transactions of the IMF : The International Journal of Surface Engineering and Coatings , 94 (4 (Special Issue: MITC special issue - Coatings for Tribology)). pp.211-221.
2015
Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research , 1115 pp.16-19.
2015
Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research , 1115 pp.166-169.
2015
Surface features of TIG melting coated CP-titanium. Advanced Materials Research , 1115 pp.234-237.
2015
Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research , 1115 pp.266-269.
2015
Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research , 1115 pp.243-246.
2015
Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research , 1115 pp.207-2012.
2015
Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research , 1115 pp.174-177.
2015
Thin surface layers of iron-based alloys deposited by TIG hardfacing . Tribology Online , 10 (6). pp.434-440.
2015
Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology , 9 (19). pp.176-181.
2015
Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology , 31 (11). pp.1362-1369.
2015
Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force . Journal of Mechanical Science and Technology , 29 (5). pp.1941-1953.
2015
Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research , 1115 pp.398-401.
2015
Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research , 1115 pp.288-291.
2015
Crush zone morphology of epoxy–glass fiber–aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research , 1115 pp.258-261.
2015
Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach . Advanced Materials Research , 1115 pp.238-242.
2015
Effect of temperature on the wear properties of alloy steel under jatropha curcas biodiesel . Advanced Materials Research , 1115 pp.203-206.
2015
TIG melted surface modified titanium alloy for cylinder liner application. International Journal of Automotive Engineering and Technologies , 4 (3). pp.130-138.
2015
Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM) , 13 (2). pp.11-13.
2015
Fabrication and characterization of graphene from solid carbon dioxide. Advanced Materials Research , 1115 pp.418-421.
2015
Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry , 51 (6). pp.523-529.
2014
Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME) , 10 (1). pp.1841-1851.
2014
Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry , 26 (4). pp.955-959.
2014
Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research , 1024 pp.207-210.
2014
Tribocorrosion behaviour of biodiesel. Tribology Online , 9 (1). pp.10-20.
2014
Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials , 465 pp.1329-1333.
2014
Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering , 56 pp.68-73.
2014
Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences , 11 (1). pp.1836-1840.
2014
Performance assessment of aluminium composite material for automotive brake rotor . International Journal of Vehicle Systems Modelling and Testing , 9 (3/4). pp.207-217.
2014
Degradation characteristics of SPF/SPS biocomposites . Fibres & Textiles in Eastern Europe , 22 (5(107)). pp.94-96.
2014
Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite . Materials Science Forum , 773-77 pp.541-546.
2013
Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research , 701 pp.225-228.
2013
Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering , 53 (2013). pp.1-5.
2013
Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design , 49 pp.285-289.
2013
The tribological behaviour of Fe-C-Al cast iron – effect of temperature. Industrial Lubrication and Tribology , 65 (5). pp.320-327.
2013
Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research , 626 pp.537-541.
2013
Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials , 378 pp.259-264.
2013
Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences , 5 (2). pp.91-93.
2013
Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials . The Arabian journal for science and engineering , 38 (11). pp.3191-3199.
2013
Thermo-mechanical behaviours of thermoplastic starch derived from sugar palm tree (Arenga Pinnata). Carbohydrate Polymers , 92 (2). pp.1711-1716.
2013
Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering , 68 pp.736-742.
2013
Synergistic effect on flexural properties of kenaf-glass hybrid composite. Advanced Materials Research , 626 pp.989-992.
2013
Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic . Procedia Engineering , 56 pp.696-701.
2013
Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. Applied Mechanics and Materials , 393 pp.246-252.
2013
Materials and processing route for aircraft brake system. International Journal of Mechanical and Materials Engineering (IJMME) , 8 (1). pp.14-20.
2012
Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences , 6 pp.288-291.
2012
Sugar palm tree: a versatile plant and novel source for biofibres, biomatrices, and biocomposites. Polymers from Renewable Resources , 3 (2). pp.61-77.
2012
Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences , 6 (12). pp.69-75.
2012
Digital logic and knowledge-based system for the automotive piston material selection. International Journal Materials and Structural Integrity , 6 (2/3/4). pp.134-150.
2012
Flexural and impact properties of kenaf-glass hybrid composite. Advanced Materials Research , 576 pp.471-474.
2012
Aluminium-copper-SiCp composite materials corrosion in biodiesel . Advanced Materials Research , 576 pp.425-428.
2012
Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research , 576 pp.76-79.
2012
A new approach to use Arenga pinnata as sustainable biopolymer: effects of plasticizers on physical properties. Procedia Chemistry , 4 pp.254-259.
2012
Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. International Journal of Mechanical and Materials Engineering (IJMME) , 7 (1). pp.48-53.
2012
Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding ARC. International Journal of Mechanical and Materials Engineering (IJMME) , 7 (1). pp.48-53.
2012
Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy , 6 (6). pp.1-5.
2012
Heat transfer analysis inside exhaust port for a hydrogen fueled port injection engine. Advanced Science Letters , 14 (1). pp.239-243(5).
2012
New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering (IJMME) , 7 (2). pp.166-170.
2012
Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems , 4 (2). pp.69-73.
2012
The crystallinity and hardness properties of Al-Cu/SiCp new composite materials. Advanced Materials Research , 576 pp.450-453.
2012
Aluminum-silicon carbide composites for enhanced physio- mechanical properties. Advanced Materials Research , 576 pp.370-373.
2011
Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research , 264 pp.1648-1653.
2011
Modelling aspect of corrosive wear under biodiesel. Engineering e-Transaction , 6 (2). pp.161-168.
2011
Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model . Journal of Mechanical Engineering and Sciences (JMES) , 1 pp.16-24.
2011
Reverse engineering of motorcycle chain. Advanced Materials Research , 264-26 pp.1678-1683.
2011
Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES) , 1 pp.16-24.
2011
Material properties and design aspects of folding bicycle frame. Advanced Materials Research , 264- pp.777-782.
2011
Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research , 264- pp.949-955.
2011
Modeling, analysis and fatigue life prediction of lower suspension arm. Advanced Materials Research , 264 pp.1557-1562.
2011
Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology , 74 pp.198-202.
2011
Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials , 465-66 pp.1329-1333.
2011
Metal matrix composite brake rotor: Historical development and product life cycle analysis. International Journal of Automotive and Mechanical Engineering (IJAME) , 4 pp.471-480.
2011
Surface temperature distribution in a composite brake rotor. International Journal of Mechanical and Materials Engineering (IJMME) , 6 (3). pp.356-361.
2011
Aluminium metal matrix composite: improving wear performance through treatment. Advanced Materials Research , 264-65 pp.278-283.
2011
Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering , 5 (2). pp.503-507.
2011
Prediction of recycle method using relevance vector machine. Advanced Materials Research , 264 pp.943-948.
2011
Current research trends on dry, near-dry and powder mixed electrical discharge machining. Advanced Materials Research , 264 pp.956-961.
2010
Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10). pp.1364-1371.
2010
Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10). pp.1364-1371.
2010
Development of a new route for Fe-C-Al cast iron production. Journal of Applied Sciences , 10 (12). pp.1196-1199.
2010
Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron. International Journal of Mechanical and Materials Engineering (IJMME) , 5 (2). pp.208-213.
2010
In-cylinder heat transfer characteristics of hydrogen fueled engine: a steady state approach. American Journal of Environmental Sciences , 6 (2). pp.124-129.
2010
Heat transfer characteristics of intake port spark ignition engine: a comparative study . Journal of Applied Sciences , 10 (18). pp.2019-2026.
2010
Materials selection of a bicycle frame using cost per unit property and digital logic methods. International Journal of Mechanical and Materials Engineering , 5 (1). pp.95-100.
2009
Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp.715-725.
2009
Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp.715-725.
2009
Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology , 61 (2). pp.78-83.
2008
Moisture absorption behaviour of sugar palm fiber reinforced epoxy composites. Materials and Design , 29 pp.1666-1670.
2008
The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering , 47 (6). pp.606-612.
2008
Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach. Journal of Applied Sciences , 8 (19). pp.3316-3327.
2008
Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology , 60 (4). pp.189-194.
2007
Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. The Arabian journal for science and engineering , 32 (2B). pp.359-364.
2007
Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology , 59 (5). pp.200-208.
2005
A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology , 159 pp.145-151.
2005
Study on impact properties of arenga pinnata fibre reinforced epoxy composites. Jurnal Teknologi Terpakai , 3 (1). pp.14-19.
2005
Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand. Materials and Design , 26 (1). pp.65-71.
2005
Total design of polymer composite automotive bumper fascia. Suranaree Journal of Science and Technology , 12 (12). pp.39-45.
2004
The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel. Journal of Materials Processing Technology , 153-15 (10). pp.482-487.
2003
Vegetable-based biodegradable lubricating oil additives . Industrial Lubrication and Tribology , 55 (3). pp.137-143.
2003
Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering , 28 (2B). pp.171-181.
2002
Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology , 54 (4). pp.177-182.
2001
The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia. Energy , 26 (7). pp.723-737.
2001
Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Journal of Automobile Engineering , 215 (3). pp.393-404.
2001
Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology , 53 (4). pp.148-154.
2000
Effect of mechanical factors on tribological properties of palm oil methyl blended lubricant. Wear , 239 pp.117-125.
1999
Palm oil and mineral oil based lubricants - their tribological and emission performance. Tribology International , 32 (6). pp.305-314.
1998
Effect of process variables on structure and properties of aluminium–silicon piston alloy. Journal of Materials Processing Technology , 77 (1-3). pp.122-128.
1998
Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel. Tribology Transaction , 41 (1). pp.155-159.
1997
Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test . Wear , 206 (1-2). pp.179-186.
1996
Wear, performance and emissions of a two-stroke engine running on palm oil methyl ester blended lubricant. Journal of Engineering Tribology , 210 (4). pp.213-219.
1996
The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel. Wear , 198 (1-2). pp.293-299.

Book

2013
Materials selection and design. Springer , Singapore . ISBN 97898-4560-37-5.

Book Section

2014
Automotive bottom structure composite materials selection: digital logic and knowledge based system approach. In: Engineering composites: properties and applications . Universiti Putra Malaysia Press , Serdang, Selangor , pp.191-210. ISBN 9789673443963.
2011
Technology of moulding for composite auto brake rotor. In: Advances in composite materials . IIUM Press , Kuala Lumpur , pp.7-12. ISBN 9789674182311.
2011
Thermal profile analysis of composite brake rotor. In: Advances in materials engineering . IIUM Press , Kuala Lumpur , pp.165-171. ISBN 9789674181673.
2011
Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: Computers and simulation in modern science . WSEAS Press , pp.107-113. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882.
2011
High Density Polyethylene (HDPE) as an alternative material in fuel tank production . In: Manufacturing management from basic machining to quality product . IIUM Press , Kuala Lumpur , pp.164-171. ISBN 9789674181659.
2011
Reverse engineering of automotive piston. In: Contemporary metallic materials . IIUM Press , Kuala Lumpur , pp.86-91. ISBN 9789674181642.
2011
The tribological behaviour of Al-Si automotive piston material. In: Contemporary metallic materials . IIUM Press , Kuala Lumpur , pp.75-80. ISBN 9789674181642.
2011
Wear of aluminium matrix composite – effects of reinforcement combination. In: Advances in composite materials . IIUM Press , Kuala Lumpur , pp.90-95. ISBN 9789674182311.
2011
Fabrication of metal matrix composite automotive brake rotor: part 1. In: Advances in composite materials . IIUM Press , Kuala Lumpur , pp.80-85. ISBN 9789674182311.
2011
A critical review of metal matrix composite brake rotor . In: Advances in composite materials . IIUM Press , Kuala Lumpur , pp.1-6. ISBN 9789674182311.
2011
High Density Polyethylene (HDPE) as an alternative material in fuel tank production. In: Advances in materials engineering (vol. 1) . IIUM Press , Kuala Lumpur , pp.126-131. ISBN 9789674181673.
2011
Reverse engineering for automotive fuel tank. In: Contemporary metallic materials . IIUM Press , Kuala Lumpur , pp.121-126. ISBN 9789674181642.
2011
Conceptual design of folding bicycle frame with light weight materials. In: Contemporary metallic materials . IIUM Press , Kuala Lumpur , pp.81-85. ISBN 9789674181642.
2011
Machining of ceramic materials: a review . In: Advanced Machining Process . IIUM Press , Kuala Lumpur , pp.38-43. ISBN 9789674181628.
2011
Fabrication of metal matrix composite automotive brake rotor: part 2 . In: Advances in composite materials . IIUM Press , Kuala Lumpur , pp.86-89. ISBN 9789674182311.

Conference or Workshop Item

2017
Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017 , Kuala Lumpur
2017
Overview of Malaysian standards on alloy steels. In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels, , Concorde Hotel Shah Alam
2017
Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Material & Processing Technologies Conference , Chennai, India
2017
Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur
2017
Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques. In: Malaysia Technology Expo (MTE 2017) , Kuala Lumpur
2017
Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017) , Melaka
2017
Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel. In: 5th Malaysia-Japan Tribology Symposium (MJTS2017) , Kuala Lumpur
2017
Particulate preplaced TIG melted surface layer of duplex stainless steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017 , Kuala Lumpur
2017
Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017) , Genting Highlands, Pahang
2017
Materials processing technology with Islamic perspective. In: KOE Islamization Seminar , KOE Islamization Office
2017
Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2017
Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur
2017
Noble hybrid composite coated low alloy steel for high temperature applications. In: Malaysia Technology Expo (MTE 2017) , Kuala Lumpur
2017
Modified surface of duplex stainless steel using tig torch and diffusion techniques. In: Malaysia Technology Expo (MTE 2017) , Kuala Lumpur, Malaysia
2017
Writing a high impact research paper. In: Seminar/Talk at Faculty of Science & Technology, University of Mostaganem Algeria , Mostaganem, Algeria
2017
TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017) , Mostaganem, Algeria
2017
Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017 , Kuala Lumpur
2016
Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016) , Kuala Lumpur
2016
Lubricated wear behaviour of SiC reinforcement on TI-6AL-4V alloy based on Taguchi approach. In: 4th Malaysia-Japan Tribology Symposium 2016 , Universiti Teknologi Malaysia
2016
Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016) , Kuala Lumpur
2016
Abrasive wear analysis of TIG melted ceramic coating using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016) , Kuala Lumpur, Malaysia
2016
Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2016
Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16) , Kuala Lumpur
2016
Investigation of parametric influence on the properties of Al6061-SiCp composite. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kulliyyah of Engineering, IIUM, Gombak
2016
Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016) , Kuala Lumpur, Malaysia
2016
Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016) , Kuala Lumpur, Malaysia
2016
Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016) , Kuala Lumpur, Malaysia
2016
Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016) , Kuala Lumpur, Malaysia
2016
Fracture surface behaviour of Al-Mg-SiCp composite materials. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) , Kuala Lumpur, Malaysia
2016
Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3) , Miskolc-Lillafüred, Hungary
2015
Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application. In: PECIPTA2015 , Kuala Lumpur
2015
Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015 , Penang, Malaysia
2015
Hardsurface layer of TiC embedded alloy steel by TIG torch technique. In: The 2015 ICBTS International Academic Research Conference in Europe & America , The Movenpick Hotels & Resorts Berlin, Germany
2015
Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. In: International Conference on Functional Materials and Metallurgy, ICoFM 2014 , Pulau Pinang
2015
Composite brake rotor: energy savings and wear performance. In: IRIIE 2015 , Cultural Activity Centre (CAC), IIUM
2015
Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015 , Penang, Malaysia
2015
Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities , Hokkaido University, Sapporo, Japan
2014
Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14) , Sunway Putra Hotel, Kuala Lumpur
2014
Contemporary light weight composite material -milestone towards automotive brake rotor application. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) , Sunway Putra Hotel, Kuala Lumpur
2014
TIG melted surface modified titanium alloy for automotive cylinder liner application. In: International Conference on Advanced Technology & Sciences (ICAT’14) , Antalya, Turkey
2014
Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique . In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014) , Cultural Activity Center (CAC), Internatioanal Islamic University Malaysia
2014
Performance of hybrid aluminium–composite columnar tube under axial crush force . In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) , Kuala Lumpur
2014
Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014 , Kuala Lumpur, Malaysia
2013
High performance aluminium composite brake rotor. In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013) , Kuala Lumpur Convention Centre, Malaysia
2013
Development of kenaf hybrid composite for structural applications. In: IRIIE 2013 , Cultural Activities Centre , International Islamic Univesity Malaysia
2013
Physical property of multi walled carbon nanotube reinforced aluminium nano composite . In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013 , Cultural Activity Centre (CAC) and KAED Gallery, IIUM
2013
Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor. In: 24th International Invention, Innovation and Technology Exhibition (ITEX 2013) , KLCC
2013
Energy saving composite automotive brake rotor prototype . In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013 , Cultural Activity Centre (CAC) and KAED Gallery, IIUM
2012
Failure of woven fiber glass epoxy composite under charpy impact loading. In: The 21st Scientific Conference of the Microscopy Society of Malaysia , Kota Bahru, Malaysia.
2012
A novel approach for the prediction of thermal distribution in automotive brake rotor. In: 5th Engineering Conference (ENCON12) , Kuching, Sarawak
2012
Reverse engineering of automotive piston. In: IRIIE2012 , CAC, IIUM
2012
Physical property of multi walled carbon nanotube reinforced aluminium nano composite . In: World Research & Innovation Convention on Engineering & Technology (WRICET2012) , KL
2012
Biodiesel production from Macro Algae as a green fuel for diesel engine. In: 5th Engineering Conference (ENCON12) , Kuching, Sarawak
2012
Development of waste coir-reinforced aluminum matrix automotive brake pad material . In: IRIIE2012 , CAC, IIUM
2011
Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011 , Langkawi, Malaysia
2011
New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011 , Langkawi, Malaysia
2011
Tribological study of A1 based natural fibre reinforced composite brake pad materials. In: Regional Tribology Conference 2011 , Langkawi, Malaysia
2011
Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011 , Langkawi
2011
Energy efficient lighter weight aluminium matrix composite automotive brake motor. In: International Conference On Harnessing Technology (ICHT) 2011, , Muscat, Oman
2011
Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference , Langkawi, malaysia
2011
Medelling aspect of corrosive wear under biodiesel. In: Regional Tribology Conference , Langkawi, Malaysia
2011
Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011 , Langkawi, Malaysia
2010
Materials for bicycle frame system - a case study on the development of selection method. In: The third international conference on structure, processing and properties of materials , Dhaka
2010
Design and development of mild steel die for production of hip-bone joint. In: International Chemical and Environmental Engineering Conference 2010 , Kuala Lumpur
2010
Mold preparation for stir casting of aluminium matrix composite brake motor: a review. In: World Engineering Congress , Sarwak
2010
Reverse engineering of children bicycle. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Knowledge based expert system application for automative piston material selection. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , Pekan, Pahang
2010
The development of an optimum material selection process for the design of automative brake rotor. In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010) , Kuala Lumpur Convention Centre, Kuala Lumpur
2010
Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010) , Pekan, Pahang
2010
Material selection method in design of automotive brake disc . In: World Congress on Engineering 2010 , London, United Kingdom
2010
Development of material selection method for the application children bicycle frame. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010) , Kuala Lumpur
2010
Effect of multiple-particle size reinforced silicon carbide(SICP) on properties of aluminium matrix composite. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , Pekan, Pahang
2010
An overview of advanced material characterization techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , Pekan, Pahang