Staff Details

S. M. A. Motakabber

S. M. A. Motakabber
Designation: Assistant Professor
KULLIYYAH OF ENGINEERING
IIUM Gombak Campus
Extension: 4599

Academic Qualification

  • B.Sc in Applied Physics & Electronics - Bachelor Degree , University of Rajshahi
  • M.Sc in Applied Physics & Electronics - Masters Degree , University of Rajshahi
  • Ph.D in Electrical, Electronics & Systems Engineering - Doctor of Philosophy , Universiti Kebangsaan Malaysia (UKM)

Area of Specialisation

  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Electrical & Electronics

Teaching Responsibilities

ELECTRICAL AND COMPUTER ENGINEERING LAB I 2014/2015 2013/2014 2012/2013
ELECTRICAL ENGINEERING LAB 2016/2017 2015/2016
ELECTRICAL ENGINEERING LAB I 2016/2017 2015/2016
ELECTRONIC CIRCUITS 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011
ELECTRONIC CIRCUITS 2016/2017
ELECTRONICS 2012/2013 2011/2012 2009/2010
ELECTRONICS 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
ELECTRONICS 2016/2017 2015/2016
EMBEDDED SYSTEM DESIGN 2016/2017
EMBEDDED SYSTEMS 2016/2017
ENGINEERING LAB II 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012

Research Projects

Completed

2012 - 2014
Design and Development of Advanced Techniques for Brain Computer Interface using Multi-Channel Electroencephalography (EEG) Signal

In Progress

2014 - Present
Design and Development of Chipless Ultra Wideband RFID System
2013 - Present
Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - Present
Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates

Publications

Article

2017
Design and development of wideband patch antenna for UHF RFID metal mountable tag. International Journal of Electronics Letters pp.82-98.
2016
Development of piezoelectric micro-energy harvesting system using voltage doubler. ARPN Journal of Engineering and Applied Sciences , 11 (1). pp.351-355.
2016
Simulation and evaluation of a phase synchronous inverter for micro-grid system. ARPN Journal of Engineering and Applied Sciences , 11 (1). pp.356-361.
2015
Parametric study of UWB chipless RFID tag: an impulse interrogation approach. ARPN Journal of Engineering and Applied Sciences , 10 (21). pp.10138-10142.
2015
Bridge scour monitoring by coupling factor between reader and Tag antennas of RFID system. International Journal of GEOMATE , 8 (2). pp.1328-1332.
2015
A compact wideband patch antenna for ultra high frequency RFID tag. Automatika ? Journal for Control, Measurement, Electronics, Computing and Communications , 56 (1). pp.76-83.
2015
Classification of multichannel EEG signal by linear discriminant analysis . Advances in Intelligent Systems and Computing , 330 pp.279-282.
2015
FPGA implementation of multiplier for floating-point numbers based on IEEE 754-2008 standard. Journal of Communications Technology, Electronics and Computer Science , 1 pp.1-6.
2015
An approach of differential capacitor sensor for landslide monitoring. International Journal of GEOMATE , 9 (2). pp.1534-1537.
2015
Design of a wideband inductively coupled loop feed patch antenna for UHF RFID tag. Radioengineering , 24 (1). pp.38-44.
2015
Microstrip spiral resonator for the UWB chipless RFID tag. Advances in Intelligent Systems and Computing , 366 pp.355-358.
2014
Design of a planar wideband patch antenna for UHF RFID tag. Microwave and Optical Technology Letters , 56 (7). pp.1579-1584.
2014
Design and development of computer controlled active sonar system. Technical Gazette , 21 (4). pp.751-756.
2013
Investigation on carbon nanotube electronics structure . Pensee Journal , 75 (11). pp.123-129.
2013
Crystal controlled CMOS oscillator for 13.56 MHz RFID reader. Journal of Microelectronics, Electronic Components and Materials , 43 (2). pp.119-123.
2013
Comparative data compression techniques and multi-compression results. IOP Conference Series: Materials Science and Engineering , 53 (012081). pp.1-7.
2013
Design and Development of a Simulator for Modelling Carbon Nanotube. IOP Conference Series: Materials Science and Engineering , 53(1) (012049). pp.1-6.
2013
A low-cost PC-based range finder system. International Journal of Computer and Communication Engineering , 2 (6). pp.693-695.
2013
Design and development of a compact wideband C-shaped patch antenna for UHF RFID tag. Research Journal of Applied Sciences, Engineering and Technology , 6 (12). pp.2118-2126.
2013
Edge detection techniques for iris recognition system. IOP Conference Series: Materials Science and Engineering , 53(1) (012041). pp.1-3.
2013
Development of a web-based financial application system. IOP Conference Series: Materials Science and Engineering , 53 (012080). pp.1-8.
2013
TCP/IP based networking for telemedicine. International Journal of Computer and Communication Engineering , 2 (6). pp.689-692.

Book

2012
Fundamentals of microelectronic circuits. Pearson Malaysia Sdn Bhd , Kuala Lumpur . ISBN 978-967-349-202-2.

Conference or Workshop Item

2017
Characteristics Analysis of Electrostatic Generator. In: ISERD - International Conference on Recent Innovations in Engineering and Technology (ICRIET) , Seoul, Korea
2016
Design and simulation of a PWM based phase synchronous inverter for utility grid systems with 20km feeder line. In: 3rd International Conference on Science and Social Research (CSSR 2016) , Putrajaya, Malaysia
2016
Low noise inverter for poly phase microgrid system. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016) , Kuala Lumpur, Malaysia
2016
Design of a switching mode three phase inverter. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016) , Kuala Lumpur
2016
A new approach for generating energy efficient discrete chirp signal of an UWB RFID reader circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016) , Kuala Terengganu, Terengganu
2016
Synchronization of output voltage waveforms in phase synchronous inverter with LCL filter for smart grid systems. In: 3rd International Conference on Science and Social Research (CSSR 2016) , Putrajaya, Malaysia
2016
Design and analysis of a buck-boost converter circuit for piezoelectric energy harvesting system. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016) , Kuala Lumpur, Malaysia
2016
Phase synchronous inverter for microgrid system. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016) , Kuala Lumpur
2016
Stepped waveform generation for multilevel inverter topology applications. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016) , Kuala Lumpur
2016
A narrow band microstrip bandpass filter for RF Front-End of an UWB RFID reader circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016) , Kuala Terengganu, Terengganu
2015
Simulation and evaluation of a phase synchronous inverter for micro-grid system. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , Gombak Campus, IIUM
2015
Detection of data from the UWB microstrip resonator type RFID tag. In: International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering , Khartoum, Sudan
2015
Classification of multichannel EEG signal by linear discriminant analysis. In: 23rd International Conference on Systems Engineering , Las Vegas, USA
2015
Analytical approximate solutions of the duffing-relativistic oscillator . In: The Third Intl. Conf. On Advances in Computing, Control and Networking-ACCN 2015 , Bangkok, Thailand
2015
Development of piezoelectric micro-energy harvesting system using voltage doubler. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , Gombak Campus, IIUM
2015
Tag for UWB Chipless RFID: a single antenna approach. In: 10th IEEE 2015 Regional Symposium on Micro and Nanoelectronics (RSM 2015) , Terengganu, Malaysia
2014
CNTFET SPICE model: design of a carbon nanotube field effect transistor. In: 5th International Conference on Computer & Communication Engineering 2014 , Kuala Lumpur, Malaysia
2014
Bridge scour monitoring by using RFID system. In: 4th International Conference on Geotechnique, Construction Materials and Environment , Brisbane, Australia
2014
Spiral resonator for ultra wide band chipless RFID tag . In: 5th International Conference on Computer and Communication Engineering , Kuala Lumpur, Malaysia
2014
Parameter optimization for piezoelectric micro-energy harvesting system. In: 5th International Conference on Computer and Communication Engineering , Kuala Lumpur, Malaysia
2014
Template matching techniques for iris recognition system . In: 5th International Conference on Computer and Communication Engineering , Kuala Lumpur, Malaysia
2014
Differential capacitor sensor of wireless sensor network for landslide monitoring. In: 4th International Conference on Geotechnique, Construction Materials and Environment , Brisbane, Australia
2014
Integrated si lens antenna with planar log-spiral feed for THz band. In: 5th International Conference on Computer and Communication Engineering , Kuala Lumpur
2014
Three phase three layer phase synchronous inverter for microgrid system . In: 5th International Conference on Computer and Communication Engineering , Kuala Lumpur, Malaysia
2014
Classification of multichannel EEG signal by single layer perceptron learning algorithm. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014) , Sunway Putra Hotel, Kuala Lumpur
2014
Microstrip spiral resonator for the UWB chipless RFID tag. In: The 23rd International Conference on Systems Engineering , Las Vegas, USA
2013
Development of a position detection technique for UWB chipless RFID tagged object. In: 2013 International Conference on Computing, Electrical and Electronics Engineering (ICCEEE 2013) , Khartoum, Sudan
2013
Analysis of CNT electronics structure to design CNTFET. In: 2013 IEEE 5th International Nanoelectronics Conference (INEC) , Singapore
2013
Comparative data compression techniques and multi-compression results. In: 5th International Conference on Mechatronics (ICOM'13) , Kuala Lumpur, Malaysia
2013
A planar wideband inductively coupled feed patch antenna for UHF RFID tag. In: The 2013 IEEE International Conference on RFID Technologies and Applications , Johor Bahru, Malaysia
2013
Wireless sensor network for landslide monitoring. In: 3rd International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2013) , Nagoya, Japan
2013
Performance analysis of different techniques for brain computer interfacing. In: International Conference on Computing, Electrical and Electronic Engineering , Corinthia Hotel , Khartoum, Sudan
2013
Modeling of optimum chiral carbon nanotube using DFT. In: 13th IEEE International Conference on Nanotechnology , Beijing, China
2013
Modeling of small Band-gap CNT for designing of faster switching CNTFET. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium , Langkawi, Malaysia
2013
Edge detection techniques for iris recognition system. In: 5th International Conference on Mechatronics (ICOM'13) , Kuala Lumpur, Malaysia
2013
Development of a web based financial application system. In: 5th International Conference on Mechatronics , Kuala Lumpur, Malaysia
2013
Photoplethysmography based remote health monitoring system. In: IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2013) , Kuala Lumpur, Malaysia
2013
Real-time bridge scour monitoring system by using capacitor sensor. In: 3rd International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2013) , Nagoya, Japan
2013
A planar wideband microstrip patch antenna for UHF RFID tag. In: The 2013 IEEE International Conference on Space Science and Communication (IconSpace) , Melaka