Faculties

Faculties

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Erry Yulian Triblas Adesta
Professor

Print CV Email Me

Staff Detail


My expertise is in the area of Manufacturing Systems and Engineering covering, but not limited to the following area Smart Manufacturing, Agile and Sustainable Manufacturing, Value Analysis and Value Engineering, Factory of the Future.

  • Ph.D in Manufacturing System - Doctor of Philosophy, University of Huddersfield
  • Master of Science (Engineering) - Masters Degree, University of Birmingham
  • Bachelor of Engineering in Mechanical Engineering - Bachelor Degree, Polytechnic of Huddersfield
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Fabrication Technology (Including Manufacturing of High Speed/ Precision Equipment Fabrication Machinery and Equipment and Standard Supporting Technologies of Fabrication for Metal and Plastic) - Precision Engineering
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - High Speed Machining, Machining Cost
COMPUTER AIDED DRAFTING 2007/2008 2008/2009 2009/2010 2010/2011
EGRONOMICS AND WORKSTATION DESIGN 2008/2009 2010/2011
ENGINEERING COST ANALYSIS 2015/2016
ENGINEERING DRAWING 2008/2009 2009/2010 2010/2011 2018/2019
ENGINEERING MANAGEMENT 2007/2008 2008/2009 2011/2012
ENGINEERING PROJECT MANAGEMENT 2007/2008 2008/2009 2011/2012 2012/2013
ERGONOMICS 2007/2008 2008/2009 2009/2010
MANUFACTURING DRAWING 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016
MANUFACTURING ENGINEERING LAB III 2012/2013
MANUFACTURING ENGINEERING LAB I 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016
MANUFACTURING ENGINEERING LAB II 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012
MANUFACTURING PROCESSES 2010/2011
PRODUCTION SYSTEM ANALYSIS 2016/2017
PROJECT & OPERATIONS MANAGEMENT 2018/2019 2019/2020
QUALITY SYSTEMS AND MANAGEMENT 2019/2020
QUANTITATIVE TECHNIQUES 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG 2015/2016 2016/2017 2017/2018 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG(RESEARCH MODE) 2015/2016 2016/2017 2017/2018 2018/2019
RESEARCH METHODOLOGY AND SEMINAR 2017/2018 2018/2019
RESEARCH METHODOLOGY IN MAT ENG & SEMINAR 2015/2016 2016/2017 2017/2018 2018/2019
RESEARCH METHODOLOGY IN MAT ENG & SEMINAR (RESEARCH MODE) 2015/2016 2016/2017 2017/2018 2018/2019
RESEARCH METHODOLOGY IN MFG & MATERIALS ENGIN 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017
VALUE ANALYSIS AND VALUE ENGINEERING 2013/2014 2016/2017 2017/2018 2018/2019 2019/2020
WORKSHOP TECHNOLOGY 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017
In Progress
2015 - Present Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive
2007 - Present Agile and Sustainable Manufacturing Research Unit (ASMARU)
Completed
2015 - 2018 Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive
2014 - 2017 Damage Identification of Imperfect Adhesively Bonded Structural Joint using Modal Analysis
2014 - 2015 Multi Objective Optimization for the Cutting Process in High Speed End Milling
2014 - 2017 Effect of Tool Path Strategies on Surface Quality of AISI H13 During Pocketing in High Speed End Milling
2011 - 2015 RU 2011: Development of Rotary Friction Welding Model to Predict its Welding Performance
2011 - 2013 High Speed Machining (KVC Project 2011)
2010 - 2012 Development of Embedded system for remote operation of CNC milling
2010 - 2013 High Speed Turning of Hardened Steel using Coated Carbide Inserts
2010 - 2013 Prediction of Surface Roughness in High Speed End Milling Operating due to tool run out and back cutting phenomenon
2009 - 2011 Investigation the Effect of Utilizing Different Grade of Recycled Polymide 12 on Part Surface in Selective Laser Sintering
2008 - 2010 The Influence of Toughness and Thermal Hardness to Tool Life during High Speed Turning of Mild Steel
2008 - 2011 Development of a Pilot-scale Web-based Inventory Management System for Lab Equipment and Consumable
13 July 2017 Certificated Lead Auditor ISO 9001:2000. World Quality Assurance (WQA) UK - International level.
Article
2019 Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE) , 8 (4) pp.603-614
2019 A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance. International Journal of Recent Technology and Engineering (IJRTE) , 7 (6S) pp.39-43
2019 Numerical analysis of aluminum foam sandwich subjected to compression loading. International Journal of Recent Technology and Engineering (IJRTE) , 7 (6S) pp.138-142
2019 Flexural behavior of open-cell aluminum foam sandwich under three-point bending. International Journal of Recent Technology and Engineering (IJRTE) , 7 (6S) pp.134-137
2018 Indentation mechanism in rotary hammer forging process: analytical and numerical approach. International Journal of Engineering Materials and Manufacture , 3 (4) pp.190-199
2018 Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries. International Journal of Engineering & Technology , 7 (37) pp.156-159
2018 Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences , 12 (1) pp.3321-3329
2018 Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture , 3 (1) pp.55-62
2017 Internet of Things (IoT) in agriculture industries. Indonesian Journal of Electrical Engineering and Informatics (IJEEI) , 5 (4) pp.376-382
2017 Integrated engineering project management Approach for typical small to medium manufacturing companies. Indonesian Journal of Electrical Engineering and Computer Science , 8 (2) pp.541-545
2017 Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture , 2 (4) pp.103-109
2017 Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies. Bulletin of Electrical Engineering and Informatics , 6 (4) pp.327-333
2017 Modelling and analysing deadlock in flexible manufacturing system using timed petri net. International Journal of Engineering Materials and Manufacture , 2 (1) pp.11-15
2017 Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES) , 11 (4) pp.3015-3026
2017 Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering , 184 pp.1-5
2017 Experimental study of stress-strain behaviour of open-cell aluminium foam sandwich panel for automotive structural part. International Journal of Engineering Materials and ManufactureInternational Journal of Engineering Materials and Manufacture , 2 (2) pp.25-30
2016 Influence of cutting parameters on cutting force and cutting temperature during pocketing operations. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.453-459
2016 The effect of tool path strategies on cutting temperature and cutting force during pocket milling of AISI H13. ARPN Journal of Engineering and Applied Sciences , 11 (1) pp.337-344
2015 Low temperature solder alloys for ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9717-9722
2015 Organising Value Analysis Value Engineering (VAVE) during New Product Development (NPD). ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.10052-10057
2015 Damage detection based on the natural frequency shifting of a clamped rectangular plate model. Journal of Physics: Conference Series , 628 pp.012034-1
2015 Effect of surface roughness on adhesion strength in ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9736-9743
2015 Multi objective optimisation for high speed end milling using simulated annealing algorithm . Advanced Materials Research , 1115 pp.113-116
2015 Energy cost optimization in high speed hard turning using simulated annealing algorithm. Advanced Materials Research , 1115 pp.104-108
2015 Surface roughness prediction in high speed end milling using adaptive neuro-fuzzy inference system . Advanced Materials Research , 1115 pp.122-125
2015 Implementation of functional analysis using value analysis value engineering (VAVE). ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.10072-10076
2015 Modelling and analysing the cutting forces in high speed hard end milling using neural network. ARPN Journal of Engineering and Applied Sciences , 10 (22) pp.17270 -17275
2014 Heat generation performance of a homemade friction stir welding tool. Applied Mechanics and Materials , 529 (2014) pp.200-205
2014 Welding performance of a homemade friction stir welding tool. Applied Mechanics and Materials , 446-47 pp.660-664
2014 Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering , 8 (2) pp.431-436
2013 Tool life modeling in high speed turning of AISI 4340 hardened steel with mixed ceramic tools by using face central cubic design . International Review on Modelling and Simulations , 6 (4) pp.1334-1338
2013 Experimental Investigation of the Effect of Feed Rate and Negative Tool Rake Angle in High Speed Hard Turning. Journal of Advanced Science and Engineering Research , 3 (1) pp.62-69
2013 The economic impact of using negative rake angle in high speed hard turning . Journal of Advanced Science and Engineering Research , 3 (3) pp.309-317
2012 Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials , 117-19 pp.633-638
2012 Predicting surface roughness with respect to process parameters using Regression Analysis Models in end milling. Advanced Materials Research , 576 pp.99-102
2012 Development of an economical lapping process. Advanced Materials Research , 472-47 pp.2348-2353
2012 An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. Journal of Materials Engineering and Performance , 21 (3) pp.388-394
2012 Prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened H-13 steel in CNC end milling. Advanced Materials Research , 576 pp.91-94
2012 Powder mixed micro electro discharge milling of titanium alloy: analysis of surface roughness. Advanced Materials Research , 341/42 pp.142-146
2012 Power Consumption Optimization in CNC Turning Process Using Multi Objective Genetic Algorithm. Advanced Materials Research , 576 pp.95-98
2012 Surface roughness optimization in end milling using the multi objective genetic algorithm approach. Advanced Materials Research , 576 pp.103-106
2011 Fabrication of CuSiC composite by powder metallurgy route. Advanced Materials Research , 264/65 pp.748-753
2011 Development of virtual assembly layout with modeling languages approach and simulation using Delmia™ Quest® . IIUM Engineering Journal , 12 (6) pp.9-20
2011 Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis. Advanced Materials Research , 264-5 pp.1097-1101
2011 Machining Time Simulation in High Speed Hard Turning. Advanced Materials Research , 264-5 pp.1102-1106
2011 A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace. High Temp. Mater. Proc , 1-2 pp.23-29
2011 Energy cost modeling for high speed hard turning. Journal of Applied Sciences , 11 (14) pp.2578-2584
2011 Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian Journal of Scientific Research , 4 (3) pp.255-263
2011 Simulation of compression and spring back phenomena of sandwich structure with honeycomb core subjected to low energy and low velocity impact. Key Engineering Materials , 462-63 pp.1296-1301
2011 Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials , 84-85 pp.557-561
2011 Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials , 84-85 pp.392-395
2011 New approach in cost structuring of high speed hard turning. Advanced Materials Research , 264-26 pp.1003-1008
2011 Tool life in high speed turning with negative rake angle. Advanced Materials Research , 264 pp.1009-1014
2010 Modeling electric field distribution on insulator under electron bombardment in vacuum. International Journal of Aerospace and Mechanical Engineering , 4 (4) pp.192-195
2010 Tool life estimation model based on simulated flank wear during high speed hard turning. European Journal of Scientific Research , 39 (2) pp.265-278
2010 A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13. American Journal of Applied Sciences , 7 (10) pp.1420-1425
2010 Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing , 11 (5) pp.779-784
2009 Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles . European Journal of Scientific Research , 38 (2) pp.180-188
2008 The Development of Cost Structure for High Speed Hard Turning. International Journal of Science Engineering and Technology , 1 (2) pp.47-58

Conference or Workshop Item

2019 Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018)
2018 Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18)
2018 Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18)
2018 The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018
2018 A study of tensile test on open-cell aluminum foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2018 Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
2018 Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Productivity improvement using discrete events simulation. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2018 Compressive behaviour and energy absorption of aluminium foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2018 Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018)
2018 Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2017 Simulation of real time tracking system using RFID technology to enhance quality activities in flexible manufacturing system. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017)
2017 Empirical study on AGV guiding in indoor manufacturing system using color sensor. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017)
2017 An integrated approach for facilities planning by ELECTRE method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17)
2017 Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)
2017 Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017)
2017 Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
2016 Using soft computing methods as an effective tool in predicting surface roughness. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015)
2016 Modelling and analysing deadlock in flexible manufacturing system using untimed petri net. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015)
2016 Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
2016 Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015)
2015 Modeling a conceptual framework for owner- contractor relationship and time–cost trade-off using fuzzy logic technique. In: 3rd International Conference on Advanced Computer Science Applications and Technologies – ACSAT2014
2014 Development of design structure matrix of product architecture case study: multi purpose CNC router . In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
2014 Development of design structure matrix of a product architecture. Case study: multi purpose CNC router . In: IIUM Engineering Congress 2014
2013 Flank wears simulation by using back propagation neural network when cutting hardened H-13 steel in CNC End Milling. In: 5th International Conference on Mechatronics (ICOM'13)
2013 Surface roughness modeling for CNC end milling using artificial neural network . In: 5th International Conference on Mechatronics (ICOM'13)
2013 Simulation of tool life for ceramic with negative rake angle using neural network . In: International Conference on Advanced Computer Science Applications and Technologies 2013
2012 Cutting temperature and surface roughness optimization in CNC end milling using multi objective genetic algorithm. In: 2012 International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2012
2012 prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened h-13 steel in CNC end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012)
2011 Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology
2011 Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011)
2011 Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011)
2011 The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11)
2011 Investigation of the effect of "Orange Peel" surface texture on the laser sintered part. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11)
2010 Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010
2010 Biogas energy potential in Riau Indonesia. In: International Conference on Technology for New and Renewable Energy (ICT-NRE)
2010 The development of tool life estimation model based on volume loss method. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2009 Flank wear modeling in high speed turning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009)
2009 Tool life in high speed turning with negative rake angle. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009)
2009 Machining time stimulating in high speed hard tuning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009)
2009 Modeling electric field distribution on insulator under electron bombardment in vacuum. In: Proceedings of World Academy of Science, Engineering and Technology

Book

2011 Manufacturing management: from basic machining to quality product. IIUM Press . ISBN 9789674181659
2010 Performance of cermet tools : applying negative rake angles high speed machining. LAP Lambert Academic Publish GmbH & Co . ISBN 3843374783
2010 Extended enterprise: an extension to supply-chain practice for small to medium enterprise. Lambert Academic Publishing . ISBN 9783843378840

Book Section

2018 Statistical analysis of energy absorption in aluminum foam sandwich under impact testing using the Taguchi design. In: Reference module in materials science and materials engineering Elsevier , pp.1-6
2011 Crashing a project in PERT/CPM network . In: Manufacturing management from basic machining to quality product IIUM Press . ISBN 9789674181659 , pp.91-98
2011 The project management challenges in technology innovation . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.231-237
2011 Critical chain in project management . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.239-245
2011 Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process International Islamic University Malaysia . ISBN 9789674181628 , pp.33-37
2011 Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes International Islamic University Malaysia . ISBN 9789674181628 , pp.44-48
2011 Development of empirical models for surface roughness during high speed turning for hard materials using Box-Behnken design. In: High Speed Cutting: An Approach towards Improved Machining Performance IIUM Press . ISBN 9789674180232 , pp.31-38
2011 Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance IIUM Press . ISBN 9789674180232 , pp.81-92
2011 The effect of deep cryogenic treatment on the properties of AISI D2 tool steel . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.286-293
2011 Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance IIUM Press . ISBN 9789674180232 , pp.93-100
2011 Effect of welding process on formability of tailor welded blanks . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.294-306
2011 Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance IIUM Press . ISBN 9789674180232 , pp.125-144
2011 Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance IIUM Press . ISBN 9789674180232 , pp.145-152
2011 In-Situ syntheses of high wear resistant coating reinforced Ti-6al-4v Matrix. In: Manufacturing management from basic machining to quality product IIUM Press . ISBN 9789674181659 , pp.173-179
2011 Quality management system: in light of project management. In: Manufacturing management from basic machining to quality product IIUM Press . ISBN 9789674181659 , pp.251-258
2011 New tool life models in turning hardened steel AISI 4340 under high cutting speed. In: High Speed Cutting - An Approach towards Improved Machining Performance IIUM Press . ISBN 978-967-418-023-2 , pp.3-16
2011 High speed end milling in mould and die making. In: High Speed Cutting - An Approach towards Improved Machining Performance IIUM Press . ISBN 978-967-418-023-2 , pp.17-29
2011 Improvement of typical hip-joint design for gripping and fixing . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.26-43
2011 The development of cost estimation for quality assurance system in die-casting processes . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.72-83
2011 The effect of stucco system in ceramic shell investment casting . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.139-149
2011 The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Manufacturing management from basic machining to quality product IIUM Press . ISBN 9789674181659 , pp.32-39
2011 Casting investigation of heat treated biocompatible materials for total hip bone replacement . In: Design for manufacture : Towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.151-160
2011 Effects of austempering treatment on mechanical properties of ductile iron . In: Design for manufacture: towards improved manufacturability IIUM Press . ISBN 9789674181598 , pp.170-178