Staff Directory


Nadzril Bin Sulaiman

Academic Qualification

  • Doktor Falsafah (Kejuruteraan Mikro dan Nanoelektronik) - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • Master of Science in Advanced Manufacturing Technology - Masters Degree, University of Portsmouth
  • B. Eng. (Hons) in Electronic & Electrical Engineering - Bachelor Degree, University of Portsmouth

Nadzril Bin Sulaiman (Dr.)

Assistant Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


nadzril@iium.edu.my
NA


Expert Profile


Dr. Nadzril obtained his Bachelor of Engineering (Hons) in Electronic and Electrical Engineering from the University of Portsmouth, UK and then proceed to obtain his Master of Science in Advanced Manufacturing Technology from the same university. He later continued his studies and successfully completed the Degree of Doctor of Philosophy in Microengineering and Nanoelectonics from the Institute of Microengineering and Nanoelectronics (IMEN), University Kebangsaan Malaysia. Currently, he serve as an academic staff at the Department of Mechatronics Engineering, Kulliyyah of Engineering, IIUM. His research interest includes micro and nanofabrication technology, MEMS/NEMS devices, energy harvesting devices, LoC, wearable electronics,  and electronics instrumentation.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Device Fabrication and Process


Professional Membership


  • 2015 - 2035: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
  • 2016: Member of Profesional Body / Association: (Member (174516)), International Association of Engineers (IAENG)
  • 2016: Member of Profesional Body / Association: (Graduate Engineer (GE137973A)), Board of Engineers Malaysia (BEM)


Teaching Responsibilities


ANALOG ELECTRONICS 2014/2015 2013/2014
CONTROL SYSTEM DESIGN 2017/2018
ELECTRICAL MACHINES 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
ELECTRONIC INSTRUMENTATION AND MEASUREMENT 2002/2003
INSTRUMENTATION AND CONTROL 2017/2018 2015/2016 2014/2015 2013/2014 2012/2013
INSTRUMENTATION AND MEASUREMENTS 2017/2018 2016/2017 2015/2016 2014/2015 2004/2005 2003/2004 2002/2003
INSTRUMENTATION AND MEASUREMENTS (LAB) 2004/2005 2003/2004
MECHATRONICS ENGINEERING LAB I 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2013/2014 2012/2013
MECHATRONICS ENGINEERING LAB II 2017/2018
MECHATRONICS INTERFACING LAB 2022/2023 2021/2022 2020/2021 2019/2020
MECHATRONICS LAB III 2017/2018
MECHATRONICS SYSTEM INTEGRATION 2023/2024 2022/2023
MECHATRONICS SYSTEM LAB 2022/2023
MECHATRONICS SYSTEMS LAB 2023/2024 2022/2023
MECHATRONICS WORKSHOP 2016/2017
MICROELECTROMECHANICAL SYSTEMS 2023/2024 2018/2019
MICROPROCESSOR BASED SYSTEMS 2017/2018 2016/2017
PROJECT 1 2021/2022 2020/2021 2019/2020 2018/2019 2015/2016 2014/2015 2013/2014
Project II 2020/2021 2019/2020
SEMINAR 2005/2006 2004/2005
VEHICLE ELECTRICAL SYSTEMS 2005/2006


Supervision


Pulsed Eddy Current Sensors For Corrosion Assessment.
Master Completed 2021 Co-supervisor
Development Of An Energy Harvesting Device By Using Piezoelectric Materials And Solar At Highway Road.
Master Completed 2018 Main Supervisor
Fabrication Of Micro Search Coil Magnetometer For Magnetic Field Measurement Using Combined Techniques.
Master Completed 2017 Main Supervisor
Core-Shell Ag@Pt Metalic Nanoparticles As A Targeted Drug Carrier For Cancer Treatment.
Master Completed 2017 Main Supervisor
Analysis Of Micro Coil Geometrical Features For Mems-Based Fluxgate Magnetometer.
Master Completed 2017 Co-supervisor


Research Projects


Completed
2014 - 2017 Analysis of Micro Coil Geometric Features for MEMS-Based Fluxgate Magnetometer
2014 - 2018 Novel Method in Fabrication of Micro Magnetometer for Low Magnetic Field Detection
2004 - 2006 Automic PCB Drilling Machine
2004 - 2017 Semi-Automatic PCB Drilling Machine
2004 - 2017 Challenges and Solutions in the Teaching of Instrumentation and Measurements for Undergraduate Student
On-Going
2018 - Present A New Biometrics Authentication Method Based on Fingertips Epidermis Layer Thickness Measurement


Publications


Article

2024 Heat transfer enhancement of a heat exchanger using novel multiple perforated magnetic turbulators (MPMT): an experimental study. International Journal of Thermal Sciences, 195 (1) pp. 1-9
2022 PCM examine of Silica/Decane nanostructure in the presence of copper oxide nanoparticles to improve the solar energy capacity of glass in the solar collectors via MD approach. Engineering Analysis with Boundary Elements, 145 () pp. 72-82
2018 Effect of process parameters on the synthesis of silver nanoparticles and its effects on microbes. Jurnal Teknologi, 80 (3) pp. 115-121
2017 Anticancer peptides derived from supermeal worm (Zophobas morio) larvae. International Food Research Journal (IFRJ), 24 () pp. S456-S451
2017 Fabrication of micro magnetometer using flip-chip bonding. International Journal of Mechanical And Production Engineering (IJMPE), 5 (5) pp. 30-33
2017 The aggregation study and characterization of silver nanoparticles. Solid State Phenomena, 263 () pp. 165-169
2016 A modeling study by artificial neural network on process parameter optimization for silver nanoparticle production. ARPN Journal of Engineering and Applied Sciences, 11 (20) pp. 1-6
2016 An overview of drug delivery vehicles for cancer treatment: Nanocarriers and nanoparticles including photovoltaic nanoparticles. Journal of Photochemistry & Photobiology, B: Biology, (164) pp. 151-159
2016 Process optimization of silver nanoparticle synthesis using response surface methodology. Procedia Engineering, 148 () pp. 992-999
2015 Analysis of geometrical features of e-shaped core Μ-coil fluxgate magnetometer. ARPN Journal of Engineering and Applied Sciences, 10 (18) pp. 8417-8420
2015 The investigation of frame disturbance (fd) in perceptual evaluation speech quality (PESQ) as a perceptual metric. Journal of Engineering and Applied Sciences, 10 (15) pp. 6365-6369
2014 Voltage transfer analysis of sandwich coupled inductors for MEMS planar magnetic sensor. Microsystems Technologies, () pp. 1-6
2013 Investigations on physical characteristics of three-dimensional coil structure for MEMS magnetometer. ASM Science Journal, 7 (1) pp. 27-36
2012 Physical characteristic analysis of solenoid-based coil structure. Advanced Materials Research, 403/08 () pp. 3739-3743
2012 Physical characteristic analysis of solenoid-based coil structure. Advanced Materials Research, 403/08 () pp. 3739-3743
2011 Simulation study of side-by-side spiral coil design for micromagnetometer. Advanced Materials Research, 254 () pp. 175-178
2011 Simulation study of side-by-side spiral coil design for micromagnetometer. Advanced Materials Research, 254 () pp. 175-178
2010 Geometrical analysis of planar coil design for fluxgate magnetometer. Microsystems Technologies, 16 (11) pp. 1939-1944
Conference or Workshop Item

2022 Analysis of non-invasive fingerprint thickness based authentication method utilizing near infrared spectroscopy. In: Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021,
2022 Tunnel-magnetoresistive-based pulsed Eddy current probe for inspection of corrosion under insulation. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021) 21/06/2021 - 23/06/2021,
2020 Overview on fingerprinting authentication technology. In: 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019,
2020 Overview on fingerprinting authentication technology. In: 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019,
2019 Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology, ICCST 2018,
2019 Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology, ICCST 2018,
2019 Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology (ICCST 2018),
2017 A novel approach of core-shell Ag@Pt nanoparticles production. In: 5th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2016 and International Conference on Materials Technology and Applications, ICMTA 2016,
2017 Fabrication of micro magnetometer using flip-chip bonding technique. In: The IRES International Conference,
2017 Flip-chip bonding fabrication technique. In: 6th International Conference on Mechatronics 2017,
2017 Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: The Second International Conference On Computational Science And Engineering 2017 (ICCSE 2017),
2016 Anticancer peptides derived from Supermeal worm, Zophobas morio. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Effect of some parameters in the synthesis of silver nanoparticles and its evaluation as antimicrobes . In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Modelling and optimization of process parameters for silver nanoparticles synthesis: A comparison between response surface methodology and artificial neural network. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Simulation analysis of micro coils for the fabrication of micro-scaled search coil magnetometer. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2015 Investigation of anticancer peptides from zophobas moria fabricus. In: Asian Congress on Biotechnology 2015 (ACB 2015),
2012 Effect of varying thickness of electroplated NiFe film on magnetic properties. In: 2012 IEEE International Conference on Semiconductor Electronics (ICSE),
2010 Design analysis of single layer coupled coils. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE),
Monograph

2018 RAGS14-033-0096 /Novel method in fabrication of micro magnetometer for low magnetic field detection. In: ,
2017 Analysis of micro coil geometric features for mems-based fluxgate magnetometer. In: ,