Staff Directory


Rosminazuin Bt. Ab. Rahim

Academic Qualification

  • PhD. in Micro Engineering & Nano-electronic - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • Master of Science in Microelectronics - Masters Degree, Universiti Kebangsaan Malaysia (UKM)
  • Bachelor of Engineering in Electrical and Electronic Engineering - Bachelor Degree, Universiti Sains Malaysia (USM)

Rosminazuin Bt. Ab. Rahim (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


rosmi@iium.edu.my
4525


Expert Profile


Dr. Rosminazuin Ab Rahim, graduated from University Science Malaysia in BEng (Hons) Electrical & Electronics Engineering has started her career as a quality control engineer at Delphi Packard Electric (M) Sdn Bhd, Kuala Terengganu in October 1999 until November 2001. She was then appointed as an Assistant Lecturer at the Department of Electrical & Computer Engineering, Kulliyyah of Engineering in January 2003.
She obtained the Master of Science (Microelectronics) in 2004 and Degree of Doctor of Philosophy (Microengineering and Nanoelectronics) in 2012 from University Kebangsaan Malaysia. Currently, she is attached as an Associate Professor to the Department of Electrical & Computer Engineering, Kulliyyah of Engineering, International Islamic University Malaysia.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Other Mechanical Engineering n.e.c.


Professional Membership


  • 2014 - 2019: Member of Profesional Body / Association: (Member), Board of Engineers Malaysia
  • 2014 - 2019: Member of Profesional Body / Association: (Member), The Institution of Engineers Malaysia
  • 2014 - 2019: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
  • 2018 - 2019: Member of Profesional Body / Association: (Member), Persatuan Saintis Muslim Malaysia (PERINTIS)


Teaching Responsibilities


ELECTRICAL ENGINEERING LAB 2019/2020 2021/2022 2018/2019 2016/2017 2020/2021 2017/2018
ELECTRICAL ENGINEERING LAB 1 2021/2022
ELECTRONIC COMMUNICATIONS 2004/2005 2006/2007
ELECTRONICS 2006/2007 2013/2014 2017/2018 2016/2017 2019/2020 2014/2015 2012/2013 2018/2019 2015/2016 2005/2006 2020/2021 2021/2022
ENGINEERING LAB I 2007/2008
ENGINEERING LAB II 2006/2007 2012/2013 2013/2014 2005/2006 2017/2018
FINAL YEAR PROJECT 1 2019/2020 2018/2019
Final Year Project I 2018/2019 2020/2021
MICROELECTROMECHANICAL (MEM) SENSORS, ACTUATORS AND SYSTEMS 2018/2019 2019/2020
MICROELECTROMECHANICAL SENSOR, ACTUATORS AND SYSTEMS 2019/2020 2018/2019 2020/2021
PROJECT I 2015/2016 2018/2019 2016/2017 2017/2018 2013/2014 2014/2015
PROJECT II 2012/2013


Research Projects


Completed
2019 - 2019 Educational Activities Program with "Anak-Anak Orang Asli ASDAF"
2016 - 2019 An Investigation on the Piezoelectric Characteristics of Thin Film for Flexible Surface Acoustic Wave Ultraviolet Microsensor
2015 - 2018 Novel Theoretical Model of an electrochemical nanobiosensor for rapid detection of dengue
2014 - 2018 Novel Method in Fabrication of Micro Magnetometer for Low Magnetic Field Detection
2014 - 2016 Modelling of Induced Nuclear Interaction Effect on Static Random Access Memory (SRAM) in Near Equatorial Orbit
2013 - 2017 Novel Modelling Of A Bio-Analysis Platform (Biochip) With The Integrated Dielectrophoresis (Dep) And Magnetophoresis (Map) Forces For Particles Manipulations.
2013 - 2015 Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - 2015 Development of MEMS Cantilevr-Based Biosensor
2013 - 2015 Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates
2012 - 2015 A Development of a Top Down Silicon Nanoware into Field Effect Transistor
2012 - 2015 Design and development of MEMS Acoustic Energy Harvester
2007 - 2009 Hardware Prototyping of a Multiagent Based Smart Home for Disable People
2006 - 2008 Hardware Prototyping Of Fetal Heart Rate Monitoring System Using Artificial Intelligence
On-Going
2020 - Present Design and Development of Screen Printed Potentiostat for Dengue Biosensor
2020 - Present Design and Development of Screen Printed Carbon Electrodes (SPCEs) For Nicotine Sensor
2020 - Present DESIGN AND DEVELOPMENT OF FLEXIBLE MILIMETER WAVE ANTENNA FOR RF ENERGY HARVESTER
2020 - Present Design and Development of Stretchable Sensors for Facial Expressions
2020 - Present Design and Development of Cytosensor for Personalized Chemotherapy Treatment
2020 - Present Design and Development of Integrated QCM and EIS Dengue Hybrid Biosensor
2020 - Present 2020 IEEE RIO EA New Innovative Challenge - IEEE EDS Malaysia Chapter - Pre-University Program: Bringing STEM to life (STEM for" Learning Disabled Students)
2020 - Present DESIGN AND DEVELOPMENT OF STRECTHABLE ANTENNA FOR MSI APPLICATIONS
2019 - Present Portable and precise electrochemical-quartz crystal microbalance diagnostic system for early detection of dengue
2019 - Present Empirical Model for Volatile Organic Compound Selectivity Prediction of Polymer-based Acoustic Wave Sensor Array through Machine Learning Algorithm
2018 - Present Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications
2018 - Present Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications
2009 - Present VSLI and MEMS Research Unit
- Enhanced Nicotine Detection Using Electrochemical-based Screen-printed Carbon Electrodes Modified with Graphene-Based Materials


Award & Recognition


09 May, 2019 Community Engagement Award (Academic Staff Category) 2019 - KOE Takrim 2019 KCDIO
19 Jan, 2019 IEEE 2018 Outstanding Volunteer Award (2nd Runner Up) - Others National
17 Jan, 2019 IEEE EDS Outstanding Volunteer 2018 - Others National
13 Aug, 2018 Public Outreach and Community Service Award (2018) - KOE KCDIO


Publications


Article

2020 Integrated multichannel electrochemical–quartz crystal microbalance sensors for liquid sensing. IEEE Access, 8 () pp. 3668-3676
2019 Durability of 4H-SiC Schottky power diodes irradiated with high-energy bombarding electrons. IET Circuits, Devices & Systems, xx (xx) pp. 1-7
2019 Finite element simulation of MEMS piezoelectric energy scavenger based on pzt thin film. IIUM Engineering Journal, 20 (1) pp. 90-99
2019 Flexible PVDF thin film as piezoelectric energy harvester. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 443-449
2019 Investigation on the mass sensitivity of quartz crystal microbalance gas sensor using finite element simulation. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 460-469
2019 Silicon carbide schottky diodes forward and reverse current properties upon fast electron radiation. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 428-437
2018 Evaluation of the W-metric routing Uuing RPL protocol in LLNS. IIUM Engineering Journal, 19 (2) pp. 80-89
2018 Recent trends in dengue detection methods using biosensors. IIUM Engineering Journal, 19 (2) pp. 134-153
2018 Verification of quartz crystal microbalance array using vector network analyzer and openQCM. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1) pp. 84-93
2017 Screen printed electromechanical micro-total analysis system (μtas) for sensitive and rapid detection of infectious diseases. Procedia Technology, 27 () pp. 101-102
2015 Fabrication of dual- and single-layer piezo resistive micro cantilever sensor. ARPN Journal of Engineering and Applied Sciences, 10 (15) pp. 6274-6278
2015 Fabrication of dual- and single-layer piezoresistive microcantilever sensor. ARPN Journal of Engineering and Applied Sciences, 10 (15) pp. 6274-6278
2014 Electrical characterization of commercial NPN bipolar junction transistors under neutron and gamma irradiation. Nuclear Technology and Radiation Protection, 29 (1) pp. 46-52
2014 Simple microcantilever release process of silicon piezoresistive microcantilever sensor using wet etching. Applied Mechanics and Materials, 60 () pp. 894-898
2013 ProTEK PSB coating as an alternative polymeric protection mask for KOH bulk etching of silicon. Microsystem Technologies, 19 (6) pp. 905-914
2006 Neural network based ECG signal analysis for heart rate detection. WSEAS Transactions on Signal Processing, 2 (6) pp. 889-895
Conference or Workshop Item

2019 Development of integrated electrochemical-quartz crystal microbalance biosensor arrays: towards ultrasensitive, multiplexed and rapid point-of-care dengue detection. In: 12th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2019,
2018 Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017,
2018 Performance analysis of SAW gas sensor based on ST-Cut quartz for breath analysis. In: 2018 IEEE International Conference on Semiconductor Electronics (ICSE),
2018 Reliability study of silicon carbide Schottky Diode with fast electron irradiation. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2017 Modeling of a novel biosensor with integrated mass and electrochemical sensing capabilities. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES),
2017 Optimization of printing techniques for electrochemical biosensors. In: 11th Asian Conference on Chemical Sensors (ACCS2015),
2016 Design and simulation of MEMS helmholtz resonator for acoustic energy harvester. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Design and Simulation of MEMS Hemholtz Resonator for Acoustic Energy Harvester. In: 2016 International Conference on Computer and Communication Engineering (ICCCE),
2016 Queue backlog as a node metric for RPL protocol. In: ICCCE 2016 International Conference on Computer and Communication Engineering 2016,
2016 Radiation characteristics and SEU rates in NEqO environment using SPENVIS. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2015 Fabrication of monolithic wheatstone bridge circuit for piezoresistive microcantilever sensor. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP),
2014 Analysis of electrical responses of MEMS piezoresistive microcantilever. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2014 Human gait recognition: viewing angle effect on normal walking pattern. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2014 Performance analysis of zinc oxide piezoelectric MEMS energy harvester. In: IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE,
2013 Design optimization of MEMS dual-leg shaped piezoresistive microcantilever. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013),
2012 An alternative polymeric protection mask for bulk KOH etching of silicon. In: 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2012 Geometrical characterization of single layer silicon based piezoresistive microcantilever using ANSYS. In: 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012,
2012 Induced mass change technique for glucose detection in microcantilever-based sensors. In: 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012,
2006 An approach to detect QRS complex using backpropagation neural network. In: 7th WSEAS International Conference on Neural Networks,