Staff Directory


Ahmad Hafiz Bin Zulkifly

Academic Qualification

  • Doctor of Philosophy (Medical Sciences) - Doctor of Philosophy, International Islamic University Malaysia
  • Master of Surgery (Orthopaedics) - Masters Degree (Clinical Specialist), Universiti Kebangsaan Malaysia (UKM)
  • Medical Doctor - Masters Degree, Universiti Sains Malaysia (USM)

Ahmad Hafiz Bin Zulkifly (Prof. Dato' Dr.)

Professor
IIUM Kuantan Campus

KULLIYYAH OF MEDICINE

Other's position:

Campus Director, Office of the Campus Director, Kuantan Campus


ahafiz@iium.edu.my
NA


Expert Profile


Professor Dr. Ahmad Hafiz Zulkifly started his career as a trainee lecturer / medical lecturer (General Orthopaedics,Traumatology) at Hospital Tengku Ampuan Afzan (HTAA) Kuantan, Pahang, Malaysia in June 1996. Then, from February 1997 until June 1997, as an Orthopaedic trainee / Msur. Candidate (Advanced Trauma) at Hospital University Kebangsaan Malaysia (HUKM).
In July 1998 until September 1998, he was an Orthopaedic Trainee / MSur. Candidate (Hand & Microsurgery) at Hospital Kuala Lumpur (HKL), Malaysia. Prof Dr. Ahmad Hafiz joined HUKM as an Orthopaedic trainee from October 1998 until May 2000. In June 2000, Prof Dr. Ahmad Hafiz was a specialist in Orthopaedic Surgery at Department of Orthopaedics, Hospital Tengku Ampuan Afzan (HTAA). He was appointed as an Assistant Professor at the Department of Orthopaedics, Traumatology and Rehabilitation, Kulliyyah of Medicine, International Islamic University Malaysia.
Since August 2003 he has been, Orthopaedic surgeon at, Hospital Tengku Ampuan Afzan (HTAA).Prof Dr. Ahmad Hafiz has also extensively contributed through his writings on different aspects of Outcome Research in Orthopaedics, Animal Study (Implant and Biomaterial in Orthopaedic).
Biocompatibility Study, Tissue Engineering, Tissue Bank, Orthopaedic and Musculoskeletal Clinical Research, Advanced Orthopaedic Research, and Implant Biomechanical Research. He has the credit of publishing 34 research articles and he is also founder editor of the News, Malaysian Medical Association. Prof Dr. Ahmad Hafiz is presently working as a Professor at the IIUM and is also the Director of Office of IIUM Teaching Hospital Management. He is also presently the executive director at IIUM Specialist Medical Centre. Prof . Dr. Ahmad Hafiz has received many honours and awards such as International AO Fellowship ( Arbeitsgemeinschaft fur Osteosynthesefragen/ Association for the Study of Internal Fixation (ASIF/ AO) Johannes- Gutenberg University, Mainz, Germany on 3rd September 2001-26th October 2001. Besides that, Prof Dr. Ahmad Hafiz also received many awards from IIUM for his dedication and excellent work.


Area of Specialisation


  • Medical And Health ~ Medical And Health Sciences ~ Clinical Medicine ~ Orthopaedics - Joint Replacement and Arthroplasty


Professional Membership


  • Member of Profesional Body / Association: (Life Member), Malaysia Orthopaedic Association
  • Member of Profesional Body / Association: (Life member), Asia Pacific Diabetic Limb Problem Association
  • Member of Profesional Body / Association: (Life member), Islamic Medical Association Malaysia
  • 2013 - 2015: Member of Profesional Body / Association: (President), Asia Pacific Diabetic Limb Problem Association
  • 2013: Member of Profesional Body / Association: (Lifemember), Academy of Medicine Malaysia


Teaching Responsibilities


ADVANCE TRAUMA 2017/2018 2014/2015
APPLIED PHYSIOLOGY 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
ARTHROPLASTY AND JOINT REPLACEMENT SURGERY 2023/2024 2022/2023 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
CLINICAL ANATOMY 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
ELECTIVE 2022/2023 2014/2015
GENERAL ORTHOPAEDIC AND TRAUMATOLOGY I 2023/2024 2017/2018 2015/2016
GENERAL ORTHOPAEDIC AND TRAUMATOLOGY II 2015/2016
GENERAL PATHOLOGY 2021/2022 2019/2020 2017/2018 2014/2015
INTENSIVE CARE & GENERAL SURGERY 2017/2018 2015/2016 2014/2015
INTENSIVE CARE AND GENERAL SURGERY 2021/2022 2019/2020
ISLAMIC INPUT IN ORTHOPAEDIC 2023/2024 2022/2023 2021/2022 2019/2020 2017/2018 2015/2016
ISLAMIC INPUT IN ORTHOPAEDIC SURGERY 2014/2015
OPERATIVE ORTHOPAEDIC SURGERY AND IMPLANTS 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
ORTHOPAEDIC IMAGING 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
ORTHOPAEDICS AND TRAUMATOLOGY I 2022/2023 2021/2022 2019/2020 2014/2015
ORTHOPAEDICS AND TRAUMATOLOGY II 2023/2024 2022/2023 2021/2022 2014/2015
ORTHOPAEDICS, TRAUMATOLOGY & REHABILITATION 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011
ORTHOPAEDICS, TRAUMATOLOGY AND REHABILITATION I 2023/2024 2022/2023 2021/2022 2020/2021
ORTHOPAEDICS, TRAUMATOLOGY AND REHABILITATION II 2023/2024 2022/2023 2021/2022
PRINCIPLE OF SURGERY & BASIC ORTHOPAEDIC SURGERY 2017/2018 2015/2016 2014/2015
PRINCIPLE ORTHOPAEDIC SURGERY 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
PRINCIPLES OF SURGERY AND BASIC ORTHOPAEDIC SURGERY 2021/2022 2019/2020
REHABILITATION AND BIOMECHANICS 2021/2022 2019/2020 2017/2018 2015/2016 2014/2015
RESEARCH METHODOLOGY 2023/2024 2022/2023 2021/2022 2019/2020 2017/2018 2014/2015 2013/2014 2012/2013
SPORTS MEDICINE AND ARTHROSCOPY 2014/2015


Supervision


Development, In-Vitro And In-Vivo Evaluation Of Gentamicin And Nigella Sativa Oil Plga Microspheres .
Ph.D Completed 2017 Co-supervisor
Evaluation Of Three-Dimensional Poly (Lactic-Co-Glycolic Acid), Atelocollagen And Fibrin Scaffolds For Intervertebral Disc Tissue Engineering.
Ph.D Completed 2017 Co-supervisor
Cartilage Tissue Engineering : Exploring The Potential Of Poly (Lactic-Co-Glycolic Acid) Based Scaffolds And The Bioethical Aspect From Islamic Perspective.
Ph.D Completed 2016 Co-supervisor
The Effect Of Granumas Augmented With Platelet Rich Plasma On Bone Formation In Rabbits.
Ph.D Completed 2011 Co-supervisor
Application Of Okra (Abelmoschus Esculentus) Extract On Wounding Healing.
Ph.D In Progress Main Supervisor
Barbed Versus Conventional Suture: Short Term Functional And Clinical Outcome In Post-Operative Total Knee Athroplasty.
Master Completed 2024 Main Supervisor
A Comparison Study Between Hydroxyapatite Nanomaterials With And Without Lauric Acid In Critical Size Defect Of New Zealand White Rabbit Tibia.
Master Completed 2023 Main Supervisor
Preoperative Evaluation Of Distal Femur Fractures And Its Association With Coronal Plane Fracture.
Master Completed 2022 Main Supervisor
Scanning Electron Microscopy Study Of Novel Biomaterial Antibiotic Delivery System For Treatment Of Osteomyelitis In New Zealand White Rabbit (Nzwr) Model.
Master Completed 2021 Main Supervisor
Outcomes Of Locked Intramedullary Nail Procedure In Closed Diaphyseal Femur Fracture In Relation To Timing Of Surgery.
Master Completed 2021 Main Supervisor
Quality Of Life And Functional Outcome In Surgically Treated Ankle Fractures In Diabetics And Non Diabetics.
Master Completed 2020 Main Supervisor
Comparison Between Computer Navigated Total Knee Replacement (Tkr) And Conventional Method: Radiological And Functional Outcomes.
Master Completed 2019 Co-supervisor
Comparison Of Biocompatibility And Biodegradability Of Poly-Lactic-Co-Glycolic Acid (Plga) Combined With Fibrin Versus Plga For Intra-Articular Fixation; An In-Vivo Study With New Zealand White Rabbits.
Master Completed 2018 Main Supervisor
Outcome Of Nexgen® Fixed Bearing And Posterior Stabilising Total Knee Replacement.
Master Completed 2017 Main Supervisor
Correlating Acetabular Lateral Inclination And Anteversion Using Post Operative Ap- View Pelvic X-Rays With Clinical Outcome In Cemented Total Hip Arthroplasties.
Master Completed 2017 Main Supervisor
Functional Outcome Of Distal Femur Fractures In Hospital Tengku Ampuan Afzan, Kuantan Pahang.
Master Completed 2016 Main Supervisor
Propective Studies On Quality Of Life Of Patient Underwent Total Hip Arthoplasty Using Depression Anxiety Stress Score 21 (Dass 21), Short Form (Sf36) And Visual Analog Score (Vas).
Master Completed 2016 Main Supervisor
The Potential Of Transcription Factor Sox9 Gene Transfer In Osteoarthritic Chondrocytes Differentiation And Articular Cartilage Formation.
Master Completed 2016 Co-supervisor
The In Vivo Study Of Injection Moulded 316l Stainless Steel Fracture Fixation Plate.
Master Completed 2015 Co-supervisor
"Assessment Of Accuracy And Reliability Of Manual Templating In Total Knee And Total Hip Replacement"..
Master Completed 2013 Main Supervisor
Skin Microvasculature In Different Types Of Diabetic Foot Ulcer: A Comparative Study.
Master Completed 2013 Co-supervisor
Formulations Of Malaysian Tualang Honey As Intraarticular Injection For Osteoarthritis.
Master Completed 2012 Co-supervisor
Histological Study If Skeletal Muscle In Diabetes Mellitus.
Master Completed 2012 Co-supervisor
To Be Determined.
Master In Progress Main Supervisor
To Be Determined.
Master In Progress Main Supervisor
To Be Determined.
Master In Progress Main Supervisor
To Be Determined.
Master In Progress Main Supervisor


Research Projects


Completed
2019 - 2023 Bio-inspired algorithm for parametric estimation of spine load in relation to dentists' work posture
2018 - 2023 PILOT SCALE DEVELOPMENT OF ANTIMICROBIAL BIOCOMPOSITE MEMBRANE FOR DENTISTRY AND ORTHOPAEDICS
2016 - Safety and Efficacy of Oral Emulsion and Implanted Beads of N. sativa-Gentamicin Antibiofilm Fusion for Osteomyelitis
2016 - 2020 The Feasibility of using a Combination of Chondrocyte-Specific Transcription Factors and Telomerase Reverse Transcriptase Genes Transfer and Tissue Engineering Technique for Articular Cartilage Regeneration
2015 - 2019 Pilot Manufacturing Process of Titania-Silver Composite Coatings on Stainless Steel Using Pulsed DC Manegtron Sputtering Technique
2014 - 2018 Non-viral Gene Transfer Approaches for Cartilage Tissue Engineering: Proof of Concept
2013 - 2016 TRANS DISCIPLINARY PROGRAM: MAIN TITLE: FUSION CONCEPT BETWEEN CONTEMPORARY MEDICINE (GENTAMICIN) AND PROPHETIC MEDICINE (N.SAATIVA) FOR FUTURE 'GREENER' PHARMACEUTICAL Project Title:Effect of Gentamicin-N.Sativa Fusion Medicine on Osteoblast Cell Lines for Use in Osteo-Healing Applications
2013 - 2017 Osteoarthritis Initiative: Exploring The Potential of Non-Viral Gene Delivery Via Cartilage Tissue Engineering Strategy And The Bioethical Concern From The Islamic Perspective
2013 - 2016 Evaluation And Characterization Of Plga/Atelocollagen/Fibrin Scaffold For Intervertebral Disc (Ivd) Regeneration
2013 - 2015 TRANS DISCIPLINARY PROGRAM (TRGS): MAIN TITLE: FUSION CONCEPT BETWEEN CONTEMPORARY MEDICINE (GENTAMICIN) AND PROPHETIC MEDICINE (N.SAATIVA) FOR FUTURE 'GREENER' PHARMACEUTICAL Project Title:Microbial Inhibition and Biofilm Assay Study Against Osteomyelitic Infection Using New Gentamicin-N.Sativa Fusion Medicine
2012 - 2016 Pre-Clinical Evaluations of Malaysian-Made "Osteopaste" an Injectable Self-Hardened Synthetic Bone Cement
2011 - 2015 Exploring the Potential of Biosynthetic Cartilage Composite Utilizing Poly (Lactic-Co-Glycolic Acid) and Fibrin Glue as Cells Carrier for Joint Resurfacing
2011 - 2017 Research on Biomechanical-To Compare between Imported Implants with OSA's Implants (bone plate and bone screw)
2011 - 2013 RU 2011- Functional Outcome of Anterior Cruciate Ligament Reconstruction: Comparison of Bone-Patella Tendon-Bone Versus Hamstring Graft: A Cross Sectional Study
2010 - 2012 Formulation of Malaysian Tualang Honey as Intraarticular Injection for Osteoarthritis
2010 - Camparing Proximal and Distal Microvasculature of The Skin Diabetic Foot Patient: Post Ray and Below Knee Amputation
2010 - 2012 Histological and Histochemical Study of Human Skeletal Muscle in Diabetes Mellitus.
2008 - 2011 Compression Fracture of the Thoracolumbar Spine: A Prospective Study Comparing Radiographic Results Between Early Ambulation with and without Lumbar Orthosis
2008 - 2011 A prospective study of Open Fracture Treated in Hospital Tengku Ampuan Afzan Kuantan. A Pilot Study for Open Fracture Registry
2007 - 2011 A Histological and Ultrastructural Study on Bone Formation in Posterolateral Intertransverse Lumbar Spinal Fusion: A Novel Use for a Locally Produced Bone Graft Substitute
2004 - 2006 The Study of Musculoskeletal Meliodosis in Pahang
On-Going
2024 - Present Bibliometric Analysis of Viscosupplement Intraarticular Injection in The Treatment of Knee Osteoarthritis
2023 - Present Difference between standing and supine plain radiograph in patients with knee osteoarthritis
2022 - Present Development of Metallic Implants Fabrication for Boosting Medical Device Industries in Malaysia
2022 - Present Comparison Between "Mobithron Advance?" and Glucosamine in Patients with Early and Moderate Knee Osteoarthritis: A Randomised Study"
2022 - Present Effectiveness of ''Mobitron Advance'' on patients with early and moderate knee osteoarthritis: A pilot study
2022 - Present Knee Kinetic-Oriented Wearable Device Prototype Development
2022 - Present Correlation between thermal assessment and magnetic resonance imaging in assessing the extension of diabetic foot infection
2022 - Present Characterization on the Properties of Mitragyna Speciosa, Deletion of Toxicity Genes, Development of Kratom-Based Medicinal Products and It's Legal Implication
2021 - Present The Effect of Flaxseed Extract as Bioactive Titanium Coating Material In-Vitro
2020 - Present Prototype Development of Malaysian Tualang Honey as Intraarticular Viscosupplement for Osteoarthritis
2014 - Present Orthopaedic Research Laboratory: Bionexus Partnership (BNP)
2012 - Present Orthopaedics, Musculoskeletal and Bioethical Research Unit
2012 - Present Orthopaedic Research Laboratory, UIAM Bionexus Partners Programme (BNP) Phase 4
2010 - Present Training, Education and Research in the Field of Orthopaedics as well as General Medical and Scientific Research
2009 - Present Innovative Pre-Commercialize Pilot Manufacturing Process Of Producing 316l Stainless Steel Fracture Fixation Plates Through Metal Injection Moulding (MIM) Technique
2008 - Present Bionexus Partnering Programme (BNP) - Orthopaedics Research Laboratories
2008 - Present Noise Exposure in Orthopaedic Surgery
2007 - Present Advanced Delivery System Using Locally - Produces Implantable Antibiotics- Incorporated Apatite Beads For Bone Repair -BioDDS
2004 - Present Close Suction Drainage Versus No Drainage In Femur Surgery
2004 - Present Operative Treatment for Ankle Fractures


Award & Recognition


29 Aug, 2020 Gold Medal - Toronto International Society of Innovation & Advanced Skills (TISIAS) International
29 Aug, 2020 Special Award - World Invention Intellectual Property Associations International
22 Feb, 2020 Gold Medal - Malaysia Technology Expo 2020 National
16 Apr, 2019 Gold Medal - SIRIM Industrial Research (SIR) National
22 Jun, 2015 AHLI JAWATANKUASA PEMANDU PENGKORMESILAN PROJEK PUBLIC PARTNERSHIP (J6P) - Ministry of Education National


Publications


Article

2024 Robotic-assisted hip and knee arthroplasty: a bibliometric analysis using the Scopus database. Cureus Journal of Medical Science, 16 (3) pp.
2023 Surgical technique for knee osteoarthritis induction in New Zealand white rabbits. Malaysian Orthopaedic Journal, 16 (Supplement A) pp.
2023 Treatment of osteoarthritis using Synvisc in New Zealand white rabbit. Malaysian Orthopaedic Journal, 16 (Supplement A) pp.
2022 Covid-19 infodemiology: association between google search and vaccination in Malaysian population. Cureus, 14 (9) pp. 1-7
2022 Effects of low-intensity pulsed ultrasound on knee range of motion of patients with total knee arthroplasty after controlling for postoperative pain. IIUM Journal of Orofacial and Health Sciences, 3 (Supplement 3) pp. 51-51
2022 Malaysian public interest in common medical problem: a 10-year Google Trends analysis. Cureus, 14 (1) pp. 1-7
2022 The feasibility of using human primary chondrocytes derived from osteoarthritic patients overexpressed with SOX9 seeded on PLGA-fibrin hybrid scaffolds for cartilage engineering. Malaysian Journal of Fundamental and Applied Sciences, 18 (3) pp. 304-322
2021 Clinical outcome of infected tibial nonunion treated with ilizarov external fixator: two-center experience. International Journal of Allied Health Science, 5 (1) pp.
2021 Clinical outcome of infected tibial nonunion treated with ilizarov external fixator: two-center experience. International Journal of Allied Health Science, 5 (1) pp. 2145
2021 Effects of pulsed ultrasound with low-intensity on recovery of physical impairments after total knee arthroplasty: a preliminary quasi-experimental study. Malaysian Journal of Medicine and Health Sciences, 17 (2) pp. 162-168
2021 Knee tuberculosis: a challenge in diagnosis and treatment. Borneo Journal of Medical Sciences, 15 (1) pp. 37-43
2021 Near-Complete Genome Sequences of Nine SARS-CoV-2 Strains Harboring the D614G Mutation in Malaysia. Microbiology Resource Announcements® (MRA), 10 (31) pp.
2020 In vitro evaluation of poly (lactic acid-co-glycolic acid)/ atelocollagen/fibrin bioscaffold for annulus fibrosus regeneration. Trends in Biomaterials and Artificial Organs, 34 (3) pp. 118-123
2020 The cartilaginous tissue formation using sry (Sex determining region Y)-BOX9 and telomerase reverse transcriptase genes transfected chondrocytes: In vivo approach = Formasi tisu tulang rawan menggunakan sry (Penentu jantina rantau Y)-BOX9 dan telomeras gen transkripsi berbalik kondrosit transfeksi: Pendekatan in vivo). Sains Malaysiana, 49 (5) pp. 1067-1080
2020 Your body has a right over you. @halal, March-April () pp. 10 -12
2019 Cartilaginous matrix components production in the in vivo ‘cell-scaffold’ construct. International Journal of Allied Health Sciences, 3 ( Special issue) (3) pp. 807-807
2019 Development of OSH risk assessment in IIUM orthopaedics research laboratory according to ISO/IEC 17025:2017 accreditation. International Journal of Recent Technology and Engineering (IJRTE), 8 (1C2) pp. 260-265
2019 Development of OSH Risk Assessment in IIUM Orthopaedics Research Laboratory According to ISO/IEC 17025:2017 Accreditation.. International Journal of Recent Technology and Engineering (IJRTE), 8 (1C2) pp. 260-265
2019 Effects of low-intensity pulsed ultrasound on recovery of physical impairments, functional performance and quality of life after total knee arthroplasty: Protocol for a quasi-experimental study. Medicine, 98 (36) pp. 1-7
2019 Fabrication of low-cost hip implant using direct metal laser sintering technique. International Journal of Recent Technology and Engineering (IJRTE), 8 (4) pp. 4544-4547
2019 Matrix production in chondrocytes transfected with sex determining region Y-Box 9 and telomerase reverse transcriptase genes: an in vitro evaluation from monolayer culture to three-dimensional culture. Tissue Engineering and Regenerative Medicine, 16 (3) pp. 285-299
2019 Orthopaedic metal implant coated with silver in a New Zealand white rabbit model: micro-ct assessment. Malaysian Orthopaedic Journal, 13 (Supplement A) pp. 1-1
2018 A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technology, 331 () pp. 74-97
2018 Biomaterials application in orthopaedics. Regenerative Research, 7 (1 Special Issue) pp. 1-1
2018 Comparison of functional outcome between computer navigated total knee replacement with conventional method. The International Medical Journal Malaysia, 17 (Supplementary Issue 1) pp. 68
2018 Midterm outcome of total knee arthroplasty in East Coast population of Hospital Tengku Ampuan Afzan Kuantan. The International Medical Journal Malaysia, 17 (Supplementary Issue 1) pp. 46
2018 Strontium ranelate reduces duration of consolidation phase in distraction osteogenesis: 2 case reports. Orthopedic Research Online Journal, 3 (5) pp. 1-5
2017 An experimental model of open tibial fracture in the New Zealand white rabbit: surgical technique. Regenerative Research, 6 (1) pp. 1-1
2017 Comparison of biocompatibility and biodegradability of Poly(Lactic-Co-Glycolic acid) (PLGA) combined with autologous fibrin versus PLGA for intra-articular screw fixation; an in-vivo study with New Zealand white rabbits–The microradiograph, histology and histomorphometry outcomes. Malaysian Orthopaedic Journal, 11 (Supplement A) pp. FR 04-2397/64067
2017 Comparison of biocompatibility and biodegradability of poly(lactic-co-glycolic acid) (PLGA) combined with autologous fibrin versus PLGA for intra-articular screw fixation; an in- vivo study with New Zealand white rabbits- the microradiograph outcome. The International Medical Journal Malaysia, 16 (supp. 1) pp. 30
2017 Current trends in gene-enhanced tissue engineering for articular cartilage regeneration in animal model. Transactions of the Persatuan Genetik Malaysia (TPGM), (7) pp. 201-210
2017 Fabrication and characterization of three-dimensional poly(lactic acid-co-glycolic acid), atelocollagen, and fibrin bioscaffold composite for intervertebral disk tissue engineering application. Journal of Bioactive and Compatible Polymers, () pp. 1-13
2017 In vivo evaluation of orthopaedic metal implant coated with silver composite: potential treatment modality for implant related infection. Regenerative Research, 6 (1) pp. 14
2017 Noise exposure during orthopaedics surgery. Science Heritage Journal / Galeri Warisan Sains (GWS), 1 (2) pp. 32-33
2017 Six hole fracture fixation plates : Comparative mechanical properties study. International Journal of Emerging Technologies in Engineering Research (IJETER), 5 (10) pp. 173-176
2017 The early outcome in antibacterial activity of orthopaedic metal implant coated with silver composite as future implant related infection treatment – preliminary results. Malaysian Orthopaedic Journal, 11 (Supplement A) pp. BBS05-BBS05
2017 The in vivo study comparing biocompatibility and biodegradability of poly lactic-co-glycolic acid (plga) combined with autologous fibrin versus plga for intra articular screw fixation in New Zealand white rabbit model-the micro-ct scan evaluation. Regenerative Research, 6 (1) pp. 1
2017 The levels of depression, anxiety and stress on pre and post knee arthroplasty patients. IIUM Medical Journal Malaysia, 16 (Supplementary Issue no. 1) pp. 39-39
2017 Treatment of osteomyelitis in New Zealand white rabbit using impregnated biomaterials with gentamicin: in vivo study outcome of bacterial study and micro-computed topography evaluation. Malaysian Orthopaedic Journal, 11 (Supplement A) pp. PR01C-PR01C
2016 Bilateral total knee replacement in severe knee osteoarthritis with large bone defect using autologous bone graft augmentation. The International Medical Journal Malaysia, 15 (Supp. 1) pp. 74
2016 Design process of low cost uncemented femoral stem 316L stainless steel using investment casting technique. Advanced Materials Research, 1133 () pp. 70-74
2016 Functional outcome of anterior cruciate ligament (ACL) reconstruction: comparison of bone-patella tendon-bone (BPTB) vs. Hamstring graft. The International Medical Journal Malaysia, 15 (Supplement Issue) pp. 19-19
2016 Histological evaluation of hydroxyapatite granules with and without platelet-rich plasma versus an autologous bone graft : comparative study of biomaterials used for spinal fusion in a New Zealand white rabbit model. Sultan Qaboos University Medical Journal, 16 (4) pp. 422-429
2016 Metal injection moulding of hip stem CoCrMo alloy powder using palm stearin binder system . Advanced Materials Research, 1133 () pp. 334-338
2016 Osteochondral defect repair via autologous implantation of three dimensional construct engineered from poly(lactic-co-glycolic acid)/ fibrin hybrid scaffold seeded with bone marrow mesenchymal stem cells. International Medical Journal of Malaysia (IMJM), 15 (Supplement Issue) pp. 42-42
2016 Outcome of NEXGEN® fixed bearing and posterior stabilising total knee replacement. The International Medical Journal Malaysia, 15 (Supp. 1) pp. 80
2016 Physical and mechanical properties of injection molded co-cr-mo alloy powder for orthopedic applications. Advanced Materials Research, 1133 () pp. 80-84
2016 Preoperative acetate templeting in primary total knee replacement: does it matter?. The International Medical Journal Malaysia, 15 (Supplementary Issue) pp. 78-78
2016 The In Vivo study of metal injection moulding 316L stainless steel fracture fixation plate. Advanced Materials Research, 1133 () pp. 95-98
2015 Alternative surgical approach to create osteomylitis in New Zealand White rabbit model. The International Medical Journal Malaysia, 14 (supp. issue) pp. 13-14
2015 Evaluation of three dimensional construct engineered from poly(Lactic-co-glycolic acid)/fibrin hybrid scaffold using rabbit bone marrow mesenchymal stem cells for osteochondral defect repair. Jurnal Teknologi, 77 (25) pp. 77-82
2015 Identifying the potential of transcription factor Sox9 gene transfer in chondrocytes differentiation and articular cartilage formation in vitro. Jurnal Teknologi, 77 (25) pp. 107-113
2015 Predictors of major lower limb amputation among type II diabetic patients admitted for diabetic foot problems. Singapore Medical Journal, 56 (11) pp. 626-631
2015 The potential of 3-dimensional construct engineered from poly(lactic-co-glycolic acid)/fibrin hybrid scaffold seeded with bone marrow mesenchymal stem cells for in vitro cartilage tissue engineering. Tissue and Cell, 47 (4) pp. 420-430
2015 The potential of 3-dimensional construct engineered from poly(lactic-co-glycolic acid)/fibrin hybrid scaffold seeded with bonemarrow mesenchymal stem cells for in vitro cartilage tissue engineering. Tissue and Cell, 47 (4) pp. 420-430
2014 Cartilaginous markers expression in human articular chondrocytes overexpressed with SOX9 gene. Regenerative Research, 3 (2) pp. 131-132
2014 Cartilaginous properties of nucleus pulposus cells seeded on poly(lactic-co-glycolic acid)-based scaffolds. Regenerative Research, 3 (2) pp. 46-47
2014 Cell proliferation assay and sulphated glycosaminoglycan production in poly(lactic-co-glycolic acid)-based scaffolds seeded with bone marrow mesenchymal stem cells for cartilage tissue engineering. Regenerative Research, 3 (2) pp. 163-164
2014 Design process of cementless femoral stem using a nonlinear three dimensional finite element analysis. BMC Musculoskeletal Disorders, 15 (1(30)) pp. 1-17
2014 Evaluation of bone marrow mesenchymal stem cells growth in vitro for cartilage tissue engineering. Regenerative Research, 3 (2) pp. 118-119
2014 Fabrication of low-cost, cementless femoral stem 316L stainless steel using investment casting technique. Artificial Organs, 38 (7) pp. 603-608
2014 IIUM Teaching Hospital: the way forward?. The International Medical Journal Malaysia, 13 (1) pp. 1-2
2014 Investigation of biomechanical and biosafety of injection moulded implant materials. Advanced Materials Research, 879 () pp. 79-84
2014 Morphological study of the newly designed cementless femoral stem. BioMed Research International, 2014 () pp. 1-11
2014 Preliminary characterization of plga scaffold for interverterbral discs tissue engineering. Regenerative Research, 3 (2) pp. 160-162
2014 Primary stability recognition of the newly designed cementless femoral stem using digital signal processing. BioMed Research International, 2014 () pp. 1-9
2013 Anthropometric measurements of the human distal femur: A study of the adult malay population. BioMed Research International , 2013 (17505) pp. 1-6
2013 Factors associated with the outcome of open tibial fractures. Malaysian Journal of Medical Sciences , 20 (5) pp. 47-53
2012 Fracture fixation plates for fracture healing: comparing 316L stainless steel by metal injection molding technique plate with conventional plate in rabbit fracture model. Regenerative Research, 1 (Supplement Issue) pp. 62
2012 Histomorphometric analysis of the endothelial cell in skin microvasculature among diabetic foot ulcer patients . Malaysian Journal of Microscopy, 8 () pp. 143-147
2012 Viscosity and viscoelasticity of osteoarthritic synovial fluids in comparison to intraarticular injection of hyaluronic acid (Synvisc and Suplasyn). Malaysian Orthopaedic Journal, 6 (2sup.A) pp. 75-75
2011 Ankle fractures: the operative outcome. Malaysian Orthopaedic Journal, 5 (1) pp. 40-43
2011 In vitro elution and dissolution of tobramycin and gentamicin from calcium phosphate. African Journal of Pharmacy and Pharmacology, 5 (20) pp. 2283-2291
2011 Molecular identification and characterization of a bacterium that has potential to degrade low concentration of haloalkanoic acid. Research Journal of Microbiology, 6 (6) pp. 552-559
2011 Morphology study of the proximal femur in Malay population. International Journal of Morphology, 29 (4) pp. 1321-1325
2011 Morphometric study of the acetabular in malay population normal hips and its clinical applications. Journal of Medical Sciences, 11 (5) pp. 213-219
2011 Total knee replacement: 12 years retrospective review and experience. Malaysian Orthopaedic Journal, 5 (1) pp. 34-39
2010 Biodegradation of low concentration of monochloroacetic acid-degrading Bacillus sp. TW1 isolated from Terengganu water treatment and distribution plant. Journal of Applied Sciences, 10 (22) pp. 2940-2944
2010 Fluorescence microscopy on the biocompatibility of gentamicin-coated hydroxyapatite (HA) material on osteoblast. Malaysian Journal of Microscopy, 6 (1) pp. 1-8
2010 Kimura’s disease with atypical musculoskeletal presentation. Malaysian Orthopaedic Journal, 4 (2) pp. 44-47
2008 An in vivo implantation study in New Zealand white rabbits for granular hydroxyapatite. European Cells and Materials, 16 (supp 2) pp. 55
2008 Granules hydroxyapatite application in fractures. European Cells and Materials, 16 (supp 2) pp. 56
2007 Contralateral posterior interosseous flap used to cover large soft tissue defect in the fingers. A case report . International Medical Journal Malaysia, 6 (1) pp. 1-9
2006 Bilateral olecranon fracture in adult. A case report.. International Medical Journal Malaysia, 5 (1) pp. 1-4
2006 Infection Following Internal Fixation Of Closed Fractures. International Medical Journal Malaysia, 5 (1) pp. 1-8
2005 Cycle spokes and chain related injuries in children - emerging injuries in Malaysia. The Medical journal of Malaysia, 60 (Supp C) pp. 11-13
2004 Practical Islamic input in Orthopaedics Undergraduate Medical Curricula. International Medical Journal Malaysia, 3 (2) pp. E2
2003 Palm-oil thorn induced granulomatous lesion with aseptic arhthritis. International Medical Journal Malaysia, 2 (2) pp. 1-5
Conference or Workshop Item

2023 Surgical technique for knee osteoarthritis induction in New Zealand white rabbits. In: 52nd MOA Annual Scientific Meeting & Annual General Meeting 2023,
2023 Treatment of osteoarthritis using Synvisc in New Zealand white rabbit. In: 52nd MOA Annual Scientific Meeting & Annual General Meeting 2023,
2021 An experimental model of induction of osteoarthritis in New Zealand white rabbit. In: Medical Research Symposium 2021,
2021 An in vivo biocompatible study of antimicrobial biocomposite membrane: preliminary outcome. In: 50th Malaysian Orthoapedic Association Annual Scientific Meeting 2021,
2021 Effects of low-intensity pulsed ultrasound as an adjunct to conventional physiotherapy on post-operative pain and functional ability of total knee arthroplasty patients. In: 50th Malaysia Orthopaedic Association Annual Scientific Meeting 2021,
2020 Bone-graft interface in New Zealand White rabbit’s model: a novel Malaysian-made biomaterial, “osteopaste”. In: Malaysia Terchnology Expo 2020,
2019 Bone-graft interface in New Zealand White rabbit’s model: a novel Malaysian-made biomaterial, “osteopaste”. In: 28th Scientific Conference of Microscopy Society Malaysia,
2019 Challenges in implementing shariah compliant hospital. In: 3rd Nusantara Conference 2019 on Medical Issues from Islamic Perspective,
2019 Effects of low-intensity pulsed ultrasound on pain and recovery of range of motion after total knee arthroplasty: preliminary study. In: Graduate Research Symposium 2019,
2019 In vivo performance of injectable self-hardened synthetic bone cement (osteopaste) as a filler for bone defects. In: SIRIM Invention, Innovation & Technology Expo (SI2TE) 2019,
2019 Orthopaedic metal implant coated with silver in a New Zealand white rabbit model: micro-ct assessment. In: 49th Malaysian Orthopaedic Association Annual Scientific Meeting / Annual General Meeting 2019,
2019 The in-vitro and in vivo evaluations of orthopedic metal implant coated with silver composite: Potential treatment modality for implant related infection. In: Bio-CAM 2017 Conference on Biomedical & Advanced Material,
2018 Bioartificial Articular Cartilage Substitute (BACS): advancing functional tissue engineered medical product. In: International Invention, Innovation & Technology Exhibition (ITEX 2018),
2018 Injectable self-hardened synthethic bone cement (Osteopaste) as a filler for bone defects: A histological result from experimental study in New Zealand white rabbit's tibia. In: Malaysia Technology Expo 2018,
2018 Injectable self-hardened synthetic bone cement (osteopaste) as a filler for bone defects: A histological result from experimental study in New Zealand White rabbit's tibia. In: 48th Malaysian Orthopaedic Association Annual Scientific Meeting/Annual General Meeting 2018,
2018 The osteomyelitis study in the New Zealand white rabbit (NZWR) model: An approach to treatment. In: 48th Malaysian Orthopaedic Association Annual Scientific Meeting 2018/Annual General Meeting,
2017 An experimental model of chronic osteomyelitis induced by staphylococcus aureus in New Zealand white rabbit. In: 1st Postgraduate Symposium on Tissue Engineering and Regenerative Medicine 2017 (TERMSYMPO 2017),
2017 An experimental model of open tibial fracture in the New Zealand white rabbit: Surgical technique. In: 1st Postgraduate Symposium on Tissue Engineering and Regenerative Medicine 2017 (TERMSYMPO 2017),
2017 Comparing impregnated of biomaterials with gentamicin as osteomyelitis treatment in New Zealand white rabbit – animal study. In: Bio-CAM 2017 Conference on Biomedical & Advanced Material,
2017 Early response in antibacterial activity of orthopaedic metal implant coated with silver composite as future implant related infection treatment – Preliminary result. In: Asia Pacific Orthopaedic Association Trauma and Infection Meeting 2017,
2017 In vivo evaluation of orthopaedic metal implant coated with silver composite: Potential treatment modality for implant related infection. In: 1st Postgraduate Symposium on Tissue Engineering and Regenerative Medicine 2017 (TERMSYMPO 2017),
2017 Initial response in antibacterial activity of orthopaedic metal implant coated with silver composite. In: Fundamental Science Congress 2017 (FSC2017),
2017 Osteomyelitis treatment in New Zealand white rabbit using impregnated biomaterials with gentamicin– in vivo studies outcome. In: 1st Postgraduate symposium on Tissue Engineering and Regenerative Medicine 2017 (TERMSYMPO 2017),
2017 Osteomyelitis treatment in New Zealand white rabbit using radiological analysis - the in vivo studies outcome comparison of score at different timing with hydroxyapatite impregnated with gentamicin. In: Asia Pacific Orthopaedic Association Trauma and Infection Meeting,
2017 Retrospect hospital project development from briefing to completion: Case study of IIUM Teaching Hospital experiences. In: Seminar ‘ Lessons Learnt’ : Projek Fasiliti Kesihatan & Hospital,
2017 The early outcome in antibacterial activity of orthopaedic metal implant coated with silver composite as future implant related infection treatment – preliminary results. In: 50th Anniversary Golden Jubilee of Malaysian Orthopaedic Association & 47th Annual Scientific Meeting / Annual General Meeting 2017,
2017 The in vitro release study of orthopaedic metal implant coated with silver composite – Preliminary result. In: Asia Pacific Orthopaedic Association Trauma and Infection Meeting 2017,
2017 The in vivo study of open fracture in New Zealand white rabbit using orthopaedic metal implant coated with silver composite – A pilot study. In: Asia Pacific Orthopaedic Association Trauma and Infection Meeting 2017,
2017 The in-vivo study comparison of biocompatibility and biodegradability of poly lactic-co-glycolic acid (PLGA) combined with autologous fibrin versus PLGA for intra-articular screw fixation in New Zealand white rabbits model - The micro-CT scan evaluation. In: 1st Postgraduate Symposium on Tissue Engineering and Regenerative Medicine 2017 (TERMSYMPO 2017),
2017 The levels of depression, anxiety and stress on pre and post knee arthroplasty patients. In: Medical Research Symposium 2017,
2017 Treatment of osteomyelitis in New Zealand white rabbit using impregnated biomaterials with gentamicin: in vivo study outcome of bacterial study and micro-computed topography evaluation. In: 50th Anniversary Golden Jubilee of Malaysian Orthopaedic Association & 47th Annual Scientific Meeting / Annual General Meeting 2017,
2016 Articular cartilage tissue engineering using poly(lactic-co-glycolic acid) based scaffolds seeded with bone marrow mesenchymal stem cells: from in vitro to in vivo model. In: National Colloquium on Stem Cell Research 2016,
2016 Bioartificial Articular Cartilage Substitute (BACS): today’s innovation for active tomorrows. In: IRIIE 2016 Commercial Potential Award,
2016 Case report: Bilateral total knee replacement in severe knee osteoarthritis. In: 46th Malaysian Orthopaedic Association Annual General Meeting/Annual Scientific Meeting & 10th ASEAN Arthroplasty Association Meeting,
2016 Characterization of poly (lactic-co-glycolic acid) / atelocollagen hybrid scaffold for intervertebral disc regeneration . In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Early response in antibacterial activity of orthopaedic metal implant coated with silver composite for future osteomyelitis treatment: preliminary results. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016,
2016 Effects of SRY (Sex Determining Region Y)-Box 9 (SOX9) and Telomerase Reverse Transcriptase (TERT) genes transfection in chondrocytes seeded on three-dimensional scaffolds: gross observation and cell proliferation assay. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting,
2016 Fabrication and evaluation of mechanical strength of poly(lactic-co-glycolic acid) scaffold incorporated with atelocollagen type II. In: National Colloquium on Stem Cell Research 2016,
2016 Formation of human articular cartilage from in vitro to in vivo short-term ectopic implantation model: Gross observation, histology and immunohistochemistry analysis. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Healing with sound: Exploring possible applications of Qur’anic recitation in human cells. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Identifying transfection efficiency and cartilaginous markers expression in chondrocytes overexpressed with SRY (Sex Determining Region Y)-Box 9 (SOX9) gene: A preliminary analysis in an in vitro model . In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 In vitro and in vivo gene expression studies of cartilage-like tissue engineered construct using a combination of transiently transfected human osteoarthritic chondrocytes and tissue engineering technique. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting,
2016 In vitro and in vivo non-viral SRY (Sex Determining Region Y)-box 9 (SOX9) and telomerase reverse transcriptase (TERT) genes transfer in chondrocytes: work in progress. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016,
2016 In vivo evaluation of 3-dimensional PLGA/ Atelocollagen/ Fibrin scaffolds for intervertebral disc (IVD) regeneration. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting,
2016 Monolayer culture expansion of Annulus fibrosus cells for intervertebral disc regeneration. In: KAHS Research Week (KRW) 2016 in conjunction with 1st Allied Health Scientific Colloquium (AHSC) 2016,
2016 Poly(lactic-co-glycolic acid) and atelocollagen hybrid scaffold seeded with annulus fibrosus cells enhances the formation of cartilaginous tissue engineered construct in vitro. In: 6th MTERMS 2016 in conjunction with 2nd Malaysian Stem Cells Meeting,
2016 Poly(lactic-co-glycolic acid), atelocollagen and fibrin hybrid scaffold seeded with annulus fibrosus cells enhances the formation of cartilaginous tissue engineered construct in vitro. In: 6th MTERMS (Malaysian Tissue Engineering and Regenerative Medicine Scientific Meeting) 2016 in conjunction with 2nd Malaysian Stem Cell Meeting,
2016 Swelling capacity and degradation behaviour of poly(lactic-co-glycolic acid) tissue engineering scaffold through atelocollagen, fibrin or, combination of atelocollagen and fibrin addition. In: 4th International Science Postgraduate Conference 2016,
2016 Viability and glycosaminoglycan content in chondrocytes transfected with SRY (sex-determining region y)-BOX 9 and telomerase reverse transcriptase genes. In: 3rd Pan-Asian Biomedical Science Conference 2016 Kuala Lumpur,
2015 Bioartificial articular cartilage substitute: towards the development of functional tissue engineered medical product. In: The International Conference and Exposition on Inventions by Institutions of Higher Learning (PECIPTA 2015),
2015 Evaluation of three-dimensional construct engineered from poly(lactic-co-glycolic acid)/fibrin hybrid scaffold seeded with rabbit bone marrow Mesenchymal stem cells for osteochondral defect repair. In: International Conference on Advancement in Science and Technology (iCAST 2015) - ‘Frontiers in Biotechnology’,
2014 A curious case of asymptomatic septic knee in closed tibial plateau fracture. In: 44th Malaysian Orthopaedic Association (MOA) Annual General Meeting / Annual Scientific Meeting 2014 incorporating 11th CAOS Asia Meeting,
2014 Exploring Islamic views on the application of gene transfer in tissue engineering approach. In: K.A.H.S. Research Week 2014,
2014 The in vivo studies of injection moulded 316l stainless steel fracture fixation plate. In: K.A.H.S. Research Week 2014,
2014 The use of poly(lactic-co-glycolic acid) and fibrin scaffolds for articular cartilage tissue engineering . In: International Health Conference IIUM (IHCI) 2014,
2013 Histomorphometric analysis of the endothelial cell in skin microvasculature among diabetic foot ulcer patients. In: IIUM Research, Invention and Innovation Exhibition 2013,
2012 A prospective study of paediatric fractures in Hospital Tengku Ampuan Afzan, Kuantan. In: 42nd Malaysian Orthopaedics Association Annual General Meeting/ Annual Scientific Meeting,
2012 Application of hydroxyapatite granules in posterolateral intertransverse lumbar spinal fusion. In: International Conference on Nanotechnology, ICONT 2012,
2012 The changes of dermal capillary morphology in different types of diabetic foot ulcer patients.. In: IIUM 1st International Postgraduate Research Conference,
2012 The diminution of capillary luminal area within dermal microcirculation and its association in diabetic foot ulcer patients. In: 21st Scientific Conference Of The Microscopy Society Malaysia,
2012 The study of the Tualang honey viscosity. In: 5th Federation of Islamic Medical Associations ( FIMA ) Conference in conjunction with the 14th IMAM Annual Scientific Meeting,
2011 Biomechanical comparison study between metal injection moulded fracture fixation plates with conventional plates. In: IIUM Research, Invention & Innovation Exhibition 2011,
2011 Fabrication of metallic implants using palm based binder through MIM process. In: Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011,
2011 Fracture fixation plate for fracture healing comparing 316L stainless steel by metal injection molding technique plate with convantional plate in rabbit fracture model. In: International Health Conference IIUM 2011 ,
2011 Gram negative infection following plating of Tibia resulted with exposed bone and implant. In: SICOT 2011 XXV Triennial World Congress,
2011 Histomorphometric analysis of the endothelial cell in skin microvasculature among diabetic foot ulcer patients. In: 20th Scientific Conference of Microscopy Society of Malaysia ,
2011 Hyaluronic acid rheological properties of Synvisc and Suplasyn for intraarticular injection In osteoarthritis. In: International Health Conference IIUM 2011,
2011 Quantitative histological and histochemical studies of different muscles of the lower limb in diabetes mellitus cases. In: 20th Scientific Conference of the Microscopy Society of Malaysia & 21st Annual General Meeting,
2011 Thoracolumbar compression fracture: should we brace? . In: 41st Malaysian Orthopaedic Association Annual General Meeting / Annual Scientific Meeting & 5th ASEAN Arthroplasty Association Meeting,
2010 Bone formation at posterolateral intertransverse lumbar fusion. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Posterolateral lumbar spinal fusion in the New Zealand white rabbit model: surgical techniques. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Production of autologous platelet-rich plasma from an animal model. In: IIUM Research, Invention and Innovation Exhibition 2010,
2010 Screw complication of ACL reconstruction: report of two cases. In: The 4th ConMed Linvatec Asia Arthroplasty Symposium 2010,
2010 Screw complication of ACL reconstruction: report of two cases. In: 40th Malaysian Orthopaedic Association Annual General Meeting/ Annual Scientific Meeting,
2010 Three dimensional anthropometric measurements of the distal femur and proximal tibia for the Malay population . In: 2010 IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010),
2009 Different effect of hydroxyapatite granules in posterolateral spinal fusion in New Zealand white rabbit: a preliminary result. In: Combined Meeting of 39th Malaysian Orthopaedic Association Annual Scientific Meeting & Annual Congress of The World Society for Endoscopic, Navigated & Minimal Invasive Spine Surgery,
2008 An In Vivo Implantation Study in New Zealand White Rabbits for Granular Hydroxyapatite. In: eCM IX MUSCULOSKELETAL TRAUMA: 50 YEARS OF AO RESEARCH,
2008 Granules Hydroxyapatite Application In Fractures. In: eCM IX MUSCULOSKELETAL TRAUMA: 50 YEARS OF AO RESEARCH,
2007 Musculoskeletal melioodosis. In: Fifth SICOT/SIROT Annual International Conference 2007,
2007 Palm oil thorn induced tumour-like lesion: a review of 4 cases. In: Fifth SICOT/SIROT Annual International Conference 2007,
2007 The use of a made-in- Malaysia Hydroxyapatite (HA) granules (GRANUMAS): early clinical results a one year review. In: Fifth SICOT/SIROT Annual International Conference 2007,
2006 Local flap for open fracture grade IIIB tibia. In: 36th Malaysian Orthopaedic Association Annual Scientific Meeting & 2nd Asia Pacific Orthopaedic Association Trauma Section Meeting,
2006 Palm oil thorn induced tumour like lesion: a review of 3 cases. In: 36th Malaysian Orthopaedic Association Annual Scientific Meeting & 2nd Asia Pacific Orthopaedic Association Trauma Section Meeting,
Book

2014 Metal injection molding of implant materials. Engineering Materials Programme, AMREC SIRIM Berhad, ISBN: 978-967-11588-1-4
Book Section

2014 An in vivo implantation study in New Zealand white rabbit for fracture model healing with metal injection molding plates: preliminary result.. In: Engineering Materials Programme, AMREC SIRIM Berhad, ISBN: 978-967-11588-1-4, pp. 119-148
2014 Fabrication and characterization of injection moulded fracture fixation plates for orthopedic applications. In: Engineering Materials Programme, AMREC SIRIM Berhad, ISBN: 978-967-11588-1-4, pp. 39-56
2014 Fabrication and characterization of injection moulded fracture fixation plates for orthopedic applications. In: Engineering Materials Programme, AMREC SIRIM Berhad, ISBN: 978-967-11588-1-4, pp. 39-56
2014 Fabrication and characterization of injection moulded fracture fixation plates for orthopedic applications. In: Engineering Materials Programme, AMREC SIRIM Berhad, ISBN: 978-967-11588-1-4, pp. 39-56
2007 Effects of gamma irradiation on the biomechanics of bone. In: World Scientific Publishing Co. Pte. Ltd., ISBN: 978-981-270-590-7, pp. 147-154
2007 Effects of gamma irradiation on the biomechanics of bone. In: World Scientific Publishing Co. Pte. Ltd., ISBN: 978-981-270-590-7, pp. 147-154
2007 Ethical, religious, legal, and cultural issues in tissue banking. In: World Scientific Publishing Co. Pte. Ltd., ISBN: 978-981-270-590-7, pp. 55-66
2007 Ethical, religious, legal, and cultural issues in tissue banking. In: World Scientific Publishing Co. Pte. Ltd., ISBN: 978-981-270-590-7, pp. 55-66
Monograph

2015 Implants for surgery - skeletal pins and wires - part 2: Steinmann skeletal pins - Dimensions (ISO 5838-2:1991, MOD). In: SIRIM,
2015 Implants for surgery - skeletal pins and wires - part 3: Kirschner skeletal wires (ISO 5838-3:1993, MOD). In: SIRIM,
2014 Asean plus guidelines: management of diabetic foot wounds. In: Smith & Nephew Singapore Pte Ltd,
2011 Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2008, IDT). In: ,
2011 Implants for surgery - Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods (ISO 16429:2004, IDT). In: Department of Standards Malaysia,
2011 Implants for surgery - metallic materials-classification of microstructures for alpha+beta titanium alloy bars (ISO 20160:2006, IDT). In: SIRIM Berhad,
2011 Implants for surgery - wear of total knee-joint prostheses - part 1: loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test (ISO 14243-1:2009, IDT). In: SIRIM,
2011 Implants for surgery - wear of total knee-joint prostheses - part 2: methods of measurement (ISO 14243-2:2009, IDT). In: SIRIM,
2011 Implants for surgery - wear of total knee-joint prostheses - part 3: loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test (ISO 14243-2:2004, COR. 1:2006, IDT). In: SIRIM,
2010 Implants for surgery - active implantable medical devices - part 1: general requirements for safety, marking and for information to be provided by the manufacturer (ISO 14708-1:2000, IDT). In: SIRIM,
2010 Implants for surgery - Components for partial and total knee joint prostheses - Part 1: Classification, definitions and designation of dimensions (ISO 7207-1:2007, IDT). In: Department of Standards Malaysia,
2010 Implants for surgery - fundamental principles. In: SIRIM,
2010 Implants for surgery - Hydroxyapatite - part 1: Ceramic Hydroxyapatite (ISO 13779-1:2008, IDT). In: SIRIM Berhad,
2010 Implants for surgery - hydroxyapatite - part 2: coatings of hydroxyapatite (ISO 13779-2:2008, IDT). In: SIRIM,
2010 Implants for surgery - hydroxyapatite - part 3: chemical analysis and characterization of crystallinity and phase purity (ISO 13779-3:2008, IDT). In: SIRIM,
2010 Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength (ISO 13779-4:2002, IDT). In: SIRIM,
2010 Implants for surgery - in vitro evaluation for apatite-forming ability of implant materials (ISO 23317:2007, IDT). In: SIRIM,
2010 Non-active surgical implants - joint replacement implants - specifice requirements for knee-joint replacement implants (ISO 21536:2007, IDT). In: ,
2010 Non-active surgical implants-joint replacement implants-particular requirements (ISO 21534:2007, IDT). In: ,