Staff Directory

Academic Qualification
- Doctor of Philosophy - Doctor of Philosophy, University of Waikato
- Master of Engineering - Masters Degree, Universiti Malaya (UM)
- Bachelor of Engineering (Manufacturing) - Bachelor Degree, International Islamic University Malaysia
Tasnim Firdaus Bt. Mohamed Ariff (Assoc. Prof. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
tasnim@iium.edu.my
5728
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - Eco-friendly Machining Processes, dry machining
- Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Other Industrial and Manufacturing Engineering n.e.c. - Lean manufacturing
- Medical And Health ~ Medical And Health Sciences ~ Phamaceutical Industry ~ Synthesis Technology - Synthesis of materials using microwave technology
Professional Membership
- 2011: Member of Profesional Body / Association, Board of Engineers Malaysia (BEM)
- 2014: Member of Profesional Body / Association, Institute of Engineers Malaysia (IEM)
Teaching Responsibilities
Advanced Manufacturing Processes | 2023/2024 |
Research Projects
Completed
2014 - 2018 | Fundamental Mechanism and Activation of Nanoadd Zirconia Toughened Alumina (ZTA) Cutting Insert via the Addition of Carbon Nanotube (CNT) for Machining Super Alloy Inconel 718 |
2014 - 2017 | Machinability Analysis and Development of Analytical Model for Ductile Mode High Speed Machining of Brittle Materials |
2014 - 2019 | Enhancing Tool Life with the Development of Silicon Nitride based Inserts for High Speed Machining of Inconel 718 using Hybrid Microwave Sintering |
2014 - 2017 | Investigation of Polarization in Membrane Distillation (MD)Process and its Energy Efficient Solution for Freshwater Production in Malaysian Households. |
2014 - 2017 | Enhanced Freshwater Production from Waste / Brackish / Saline Water in Remote Arid Areas Using Specially Designed Coolant Plates |
2014 - 2019 | Noble Approach to Control Vibration using Minimum Quantity Lubrication (MQL) in Micro Milling |
2014 - 2017 | Damage Identification of Imperfect Adhesively Bonded Structural Joint using Modal Analysis |
2012 - 2014 | Wear Analysis of Post Sintered Silicon Nitride (SIN ) and Aluminium Oxide Cutting Tools using Microwave Energy |
2011 - 2013 | Influence of The Cutting Tool Properties on Intensity of Tool Wear and Optimum Cutting Speed Using Dry Machining |
2011 - 2012 | Study on the Effect of Eco-friendly Machining using ethanol as cutting fluid on tool wear |
2010 - 2011 | Study of TiC Cutting Tool Produced by Microwave Synthesis |
On-Going
Publications
Article
Conference or Workshop Item
2023 | ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, |
2023 | Enhancing the tool life of aluminium oxide (Al2O3) inserts using hybrid microwave energy in dry machining of high strength steel (KRUPP 6582). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, |
2023 | Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, |
2023 | Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), |
2022 | Mechanical and microstructural properties of hybrid bio-composites using microwaved coconut fibre and rice husk. In: 2nd International Conference on Recent Trends in Applied Research, ICoRTAR 2021, |
2018 | Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2017 | Enhanced freshwater production using finned-plate air gap membrane distillation (AGMD). In: 2016 International Symposium on Civil and Environmental Engineering, ISCEE 2016, |
2017 | Machinability of soda lime glass in high speed end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2017 | Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2016 | Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, |
2016 | Minimum quantity lubrication in micromachining: A greener approach. In: 6th International Conference on Industrial Engineering and Operations Management, 2016 (IEOM), |
2015 | 2-Dimensional heat and mass transfer analysis of condensation on channeled coolant plate in air gap membrane distillation (AGMD) freshwater production system. In: 2nd International Conference on Desalination Using Membrane Technology, |
2014 | Design and development of a versatile ice clamping system. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), |
2014 | Effect of coolant plate geometry and material in a freshwater production system: an experimental study. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), |
2014 | Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014, |
2014 | Improved performance in aluminium oxide tool inserts via post sintering using hybrid microwave energy . In: 2nd International Conference on Emerging Trends in Scientific Research, |
2011 | Enhancing mechanical and structural properties of TiC inserts using microwave energy. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011), |
2010 | Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: , |
2010 | Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: , |
2009 | The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering. In: 4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium On Materials & Processing (RAMM & ASMP 2009), |
2009 | The effect of powder sintering method on the densification and microstructure of pewter alloys . In: Processing, Microstructure and Performance of Materials, |
2008 | Enhancing mechanical and structural properties of pewter alloy using microwave sintering. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), |
2005 | Making the lean manufacturing supply chain leap across small and medium scale industries (SMIs) in Malaysia. In: International Conference on Recent Advances in Mechanical & Material Engineering (ICRAMME 2005), |
2005 | The development of strategies for lean operations in SMIs. In: International Conference on Recent Advances in Mechanical & Material Engineering (ICRAMME 2005), |
Book Section
2014 | Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts. In: PAK publishing group, ISBN: 9789699952074, pp. 53-58 |
2014 | Design improvements in the inner shell of a motorbike helmet using coconut fiber composite. In: PAK publishing group, ISBN: 978-969-9952-07-4, pp. 59-65 |
2011 | Application of statistical quality control for quality improvement . In: IIUM Press, ISBN: 9789674181598, pp. 66-71 |
2011 | Design of a simple and affordable electric bicycle. In: IIUM Press, ISBN: 9789674181598, pp. 4-9 |
2011 | Design of bicycle helmet using FEA . In: IIUM Press, ISBN: 9789674181598, pp. 10-17 |
2011 | Microwave sintering of ceramic materials . In: IIUM Press, ISBN: 9789674181598, pp. 185-191 |
2011 | Microwave sintering of metallic materials . In: IIUM Press, ISBN: 9789674181598, pp. 179-184 |
2011 | Mould design for handphone casing using moldflow . In: IIUM Press, ISBN: 9789674181598, pp. 18-25 |
2010 | Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, ISBN: , pp. 92-97 |