Staff Directory


Rosminazuin Bt. Ab. Rahim

Academic Qualification

  • PhD. in Micro Engineering & Nano-electronic - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • Master of Science in Microelectronics - Masters Degree, Universiti Kebangsaan Malaysia (UKM)
  • Bachelor of Engineering in Electrical and Electronic Engineering - Bachelor Degree, Universiti Sains Malaysia (USM)

Rosminazuin Bt. Ab. Rahim (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


rosmi@iium.edu.my
4525


Expert Profile


Dr. Rosminazuin Ab Rahim, graduated from University Science Malaysia in BEng (Hons) Electrical & Electronics Engineering has started her career as a quality control engineer at Delphi Packard Electric (M) Sdn Bhd, Kuala Terengganu in October 1999 until November 2001. She was then appointed as an Assistant Lecturer at the Department of Electrical & Computer Engineering, Kulliyyah of Engineering in January 2003.
She obtained the Master of Science (Microelectronics) in 2004 and Degree of Doctor of Philosophy (Microengineering and Nanoelectronics) in 2012 from University Kebangsaan Malaysia. Currently, she is attached as an Associate Professor to the Department of Electrical & Computer Engineering, Kulliyyah of Engineering, International Islamic University Malaysia.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Other Mechanical Engineering n.e.c.


Professional Membership


  • 2014 - 2019: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
  • 2014 - 2019: Member of Profesional Body / Association: (Member), Board of Engineers Malaysia
  • 2014 - 2019: Member of Profesional Body / Association: (Member), The Institution of Engineers Malaysia
  • 2018 - 2019: Member of Profesional Body / Association: (Member), Persatuan Saintis Muslim Malaysia (PERINTIS)


Teaching Responsibilities


ELECTRICAL ENGINEERING LAB 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
ELECTRICAL ENGINEERING LAB 1 2022/2023 2021/2022
ELECTRONIC COMMUNICATIONS 2006/2007 2004/2005
ELECTRONICS 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2006/2007 2005/2006
ENGINEERING LAB I 2007/2008
ENGINEERING LAB II 2017/2018 2013/2014 2012/2013 2006/2007 2005/2006
FINAL YEAR PROJECT 1 2019/2020 2018/2019
FINAL YEAR PROJECT I 2020/2021 2018/2019
FINAL YEAR PROJECT II 2022/2023 2021/2022
MICROELECTROMECHANICAL (MEM) SENSORS, ACTUATORS AND SYSTEMS 2022/2023 2021/2022 2019/2020 2018/2019
MICROELECTROMECHANICAL SENSOR, ACTUATORS AND SYSTEMS 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
PROJECT I 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
PROJECT II 2012/2013
USRAH IN ACTION 1 2022/2023 2021/2022
USRAH IN ACTION 2 2022/2023


Supervision


Integrated Electrochemical And Mass Biosensor For Early Dengue Detection.
Ph.D Completed 2020 Co-supervisor
Polymer Coated Acoustic Wave Sensor For Volatile Organic Compounds Sensing Application.
Ph.D In Progress Co-supervisor
Geometric Parameter Optimization Of Screen Printed Electrode (Spe) For Electrochemical-Based Sensing Applications .
Master Completed 2021 Main Supervisor
Low-Cost And Rapid Prototyping Of Electrochemical Microfluidic Biosensors.
Master Completed 2021 Co-supervisor
Development Of Surface Acoustic Wave Device Based On Quartz.
Master Completed 2019 Co-supervisor
Electrical Characterization Of Discrete Sic Schottky Power Diodes And Converter Circuits Under Electron Radiation.
Master Completed 2019 Co-supervisor
Design And Evaluation Of Routing Metric For Rpl Routing Protocol In Wsn Based On Queue Backlogs.
Master Completed 2017 Main Supervisor
Single Event Upsets On Static Random Access Memory By Spenvis And Pspice Simulation At Near Equatorial Orbits.
Master Completed 2016 Co-supervisor
Development Of Fluidic System For Electrochemical-Based Covid-19 Biosensor.
Master In Progress Main Supervisor
Enhanced Nicotine Detection Using Electrochemical-Based Screen-Printed Electrodes Modified With Laser-Induced Graphene.
Master In Progress Main Supervisor
Intrusion Detection System Using Machine Learning And Deep Learning Algorithms For Nacots System.
Master In Progress Co-supervisor
Design And Analysis Of Mems Piezoresistive Pressure Sensors.
Master In Progress Co-supervisor
Hardware Design Of Portable Petentiostat For On-Site Covid-19 Protection.
Master In Progress Co-supervisor
Developing Of Vibration-Based Mems Piezoelectric Energy Harvester.
Master In Progress Co-supervisor
Design Of Potentiostat And Fluidic Chamber For Biosensing Application.
Master In Progress Co-supervisor
Development Of A Smart Glove For Hand Gesture Detection.
Master In Progress Co-supervisor


Research Projects


Completed
2022 - 2023 IIUM Flagship 2.0 FG7: SCITECH
2021 - 2022 SCITECH (Acculturation Science and Technology Among Underprivileged Children)
2020 - 2022 Enhanced Nicotine Detection Using Electrochemical-based Screen-printed Carbon Electrodes Modified with Graphene-Based Materials
2019 - 2023 Empirical Model for Volatile Organic Compound Selectivity Prediction of Polymer-based Acoustic Wave Sensor Array through Machine Learning Algorithm
2019 - 2023 Portable and precise electrochemical-quartz crystal microbalance diagnostic system for early detection of dengue
2019 - 2019 Educational Activities Program with "Anak-Anak Orang Asli ASDAF"
2016 - 2019 An Investigation on the Piezoelectric Characteristics of Thin Film for Flexible Surface Acoustic Wave Ultraviolet Microsensor
2015 - 2018 Novel Theoretical Model of an electrochemical nanobiosensor for rapid detection of dengue
2014 - 2016 Modelling of Induced Nuclear Interaction Effect on Static Random Access Memory (SRAM) in Near Equatorial Orbit
2014 - 2018 Novel Method in Fabrication of Micro Magnetometer for Low Magnetic Field Detection
2013 - 2015 Development of MEMS Cantilevr-Based Biosensor
2013 - 2017 Novel Modelling Of A Bio-Analysis Platform (Biochip) With The Integrated Dielectrophoresis (Dep) And Magnetophoresis (Map) Forces For Particles Manipulations.
2013 - 2015 Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - 2015 Studies on Carbon Nanotubes (CNTs) for Developing High Performance CNTFETs for Designing Low Power High Speed Logic Gates
2012 - 2015 Design and development of MEMS Acoustic Energy Harvester
2012 - 2015 A Development of a Top Down Silicon Nanoware into Field Effect Transistor
2007 - 2009 Hardware Prototyping of a Multiagent Based Smart Home for Disable People
2006 - 2008 Hardware Prototyping Of Fetal Heart Rate Monitoring System Using Artificial Intelligence
On-Going
2023 - Present MICROBIT: Fun Challenge with Sustainable Development Goals
2022 - Present Exploring STEM Electrochemistry and Sustainability from the Environment Concept for Indigenous Children at ASDAF
2022 - Present Nanosystem for Covid-19 DNA/Antibodies On The Spot Test (NACOTS) (CV02211032)
2022 - Present Let's Imagineering @ STEM Fun Club
2021 - Present Design, Modeling and Characterization of Zinc-oxide piezoelectric nanogenerator on textile
2021 - Present Stretchable chitosan-foliated graphite biocomposite as piezoresistive functional material towards enhanced strain sensing response
2021 - Present Do-Your-Bit Nature Challenge
2021 - Present Enhanced Peak Current in Nicotine Detection using Electrochemical-based Screen Printed Electrodes Modified with Chitosan-Reduced Graphene Oxide Nanocomposite
2021 - Present STEM For all: Inspiring Malaysia Indigeneous students through EDS-ETC
2021 - Present 2021 IEEE Region 10 Educational Activities ?Reaching Local Initiatives? entitled ENRICHING ORPHANS CURIOSITY
2021 - Present Fostering Online Learning for Marginalized Children in Malaysia
2021 - Present 2021 IEEE Region 10 Educational Activities ?Reaching Local Initiatives? entitled Let?s code with Microbit
2021 - Present Let's Play Robot with TryEngineering
2020 - Present Design and Development of Screen Printed Carbon Electrodes (SPCEs) For Nicotine Sensor
2020 - Present Design and Development of Stretchable Sensors for Facial Expressions
2020 - Present Design and Development of Cytosensor for Personalized Chemotherapy Treatment
2020 - Present Design and Development of Integrated QCM and EIS Dengue Hybrid Biosensor
2020 - Present 2020 IEEE RIO EA New Innovative Challenge - IEEE EDS Malaysia Chapter - Pre-University Program: Bringing STEM to life (STEM for" Learning Disabled Students)
2020 - Present DESIGN AND DEVELOPMENT OF FLEXIBLE MILIMETER WAVE ANTENNA FOR RF ENERGY HARVESTER
2020 - Present DESIGN AND DEVELOPMENT OF STRECTHABLE ANTENNA FOR MSI APPLICATIONS
2020 - Present Design and Development of Screen Printed Potentiostat for Dengue Biosensor
2018 - Present Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications
2018 - Present Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications
2009 - Present VSLI and MEMS Research Unit


Award & Recognition


09 May, 2019 Community Engagement Award (Academic Staff Category) 2019 - KOE Takrim 2019 KCDIO
19 Jan, 2019 IEEE 2018 Outstanding Volunteer Award (2nd Runner Up) - Others National
17 Jan, 2019 IEEE EDS Outstanding Volunteer 2018 - Others National
13 Aug, 2018 Public Outreach and Community Service Award (2018) - KOE KCDIO


Publications


Article

2023 Clinical performance of reverse transcription loop mediated isothermal amplification COVID-19 assay on gold- nanoparticle-modified screen-printed Carbon Electrode using differential pulse voltammetry. Sensors and Materials, 35 (10) pp. 4731-4750
2023 Development and evaluation of a high-performance electrochemical potentiostat-based desktop application for rapid SARS-CoV-2 testing. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (2) pp. 349-365
2023 Gold nanoparticle deposited on screen-printed carbon electrode for electrochemical detection of nicotine in e-cigarette. Malaysian Journal of Chemistry, 25 (2) pp. 1-12
2023 Tribology performance of polyol-ester based TiO2, SiO2, and their hybrid nanolubricants. Lubricants, 11 (1) pp. 1-20
2022 A review on the contamination of SARS-CoV-2 in water bodies: transmission route, virus recovery and recent biosensor detection techniques. Sensing and Bio-Sensing Research, 36 () pp.
2022 Chitosan coating on quartz crystal microbalance gas sensor for isopropyl alcohol and acetone detection. International Journal of Integrated Engineering, 14 (3) pp. 241-244
2022 Performance analysis of optimized screen-printed electrodes for electrochemical sensing. International Journal of Integrated Engineering, 14 (3) pp. 250-261
2022 Portable electrochemical biosensors based on microcontrollers for detection of viruses: a review. Biosensors, 12 (8) pp. 1-21
2022 Portable electrochemical biosensors based on microcontrollers for detection of viruses: a review. Biosensors, 12 (8) pp.
2022 Rheological behaviour and thermal conductivity of polyvinyl ether lubricant modified with sio2-tio2 nanoparticles for refrigeration system. International Journal of Refrigeration, 138 () pp. 118-132
2021 Advanced vapour sensing materials: existing and latent to acoustic wave sensors for VOCs detection as the potential exhaled breath biomarkers for lung cancer. Sensors and Actuators A: Physical, 329 (112792) pp.
2021 Effect of chitosan dissolved in different acetic acid concentration towards VOC sensing performance of quartz crystal microbalance overlay with chitosan. Materials Letters, 291 () pp. 1-4
2020 Integrated multichannel electrochemical–quartz crystal microbalance sensors for liquid sensing. IEEE Access, 8 () pp. 3668-3676
2019 Durability of 4H-SiC Schottky power diodes irradiated with high-energy bombarding electrons. IET Circuits, Devices & Systems, xx (xx) pp. 1-7
2019 Finite element simulation of MEMS piezoelectric energy scavenger based on pzt thin film. IIUM Engineering Journal, 20 (1) pp. 90-99
2019 Flexible PVDF thin film as piezoelectric energy harvester. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 443-449
2019 Investigation on the mass sensitivity of quartz crystal microbalance gas sensor using finite element simulation. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 460-469
2019 Silicon carbide schottky diodes forward and reverse current properties upon fast electron radiation. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 428-437
2018 Evaluation of the W-metric routing Uuing RPL protocol in LLNS. IIUM Engineering Journal, 19 (2) pp. 80-89
2018 Recent trends in dengue detection methods using biosensors. IIUM Engineering Journal, 19 (2) pp. 134-153
2018 Verification of quartz crystal microbalance array using vector network analyzer and openQCM. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1) pp. 84-93
2017 Screen printed electromechanical micro-total analysis system (μtas) for sensitive and rapid detection of infectious diseases. Procedia Technology, 27 () pp. 101-102
2015 Fabrication of dual- and single-layer piezo resistive micro cantilever sensor. ARPN Journal of Engineering and Applied Sciences, 10 (15) pp. 6274-6278
2015 Fabrication of dual- and single-layer piezoresistive microcantilever sensor. ARPN Journal of Engineering and Applied Sciences, 10 (15) pp. 6274-6278
2014 Electrical characterization of commercial NPN bipolar junction transistors under neutron and gamma irradiation. Nuclear Technology and Radiation Protection, 29 (1) pp. 46-52
2014 Simple microcantilever release process of silicon piezoresistive microcantilever sensor using wet etching. Applied Mechanics and Materials, 60 () pp. 894-898
2013 ProTEK PSB coating as an alternative polymeric protection mask for KOH bulk etching of silicon. Microsystem Technologies, 19 (6) pp. 905-914
2006 Neural network based ECG signal analysis for heart rate detection. WSEAS Transactions on Signal Processing, 2 (6) pp. 889-895
Conference or Workshop Item

2023 Biocompatibility assessment of wearable C/TPU/Tegaderm strain sensors. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Chitosan as natural binder for eco-friendly printable conductive ink. In: 2023 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2023 Deep learning-based high performance intrusion detection system for imbalanced datasets. In: 2023 9th International Conference on Wireless and Telematics (ICWT),
2023 Design and development of an intuitive desktop application for rapid SARS-CoV-2 diagnosis using electrochemical potentiostat. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023,
2023 Development of an iOS application leveraging PalmSens MethodSCRIPT for rapid COVID-19 detection. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023),
2023 Development of monitoring system for mentor-mentee programme. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Performance evaluation of Laser-Induced Screen Printed Electrodes for electrochemical detection. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023,
2023 Portable data acquisition and fluidic system for electrochemical Sensors. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC),
2022 Evaluation of portable potentiostats for electrochemical measurements: Voltammetry and Impedance spectroscopy. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2022 Investigation of fluid flow system performance for biosensor application. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2021 Performance Analysis of VOCs Detection using Polyisobutylene and Chitosan Overlayed on QCM Sensor. In: 2021 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2021 Simulation of geometrical parameters of Screen Printed Electrode (SPE) for electrochemical-based sensor. In: IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2019 Development of integrated electrochemical-quartz crystal microbalance biosensor arrays: towards ultrasensitive, multiplexed and rapid point-of-care dengue detection. In: 12th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2019,
2018 Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017,
2018 Performance analysis of SAW gas sensor based on ST-Cut quartz for breath analysis. In: 2018 IEEE International Conference on Semiconductor Electronics (ICSE),
2018 Reliability study of silicon carbide Schottky Diode with fast electron irradiation. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2017 Modeling of a novel biosensor with integrated mass and electrochemical sensing capabilities. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES),
2017 Optimization of printing techniques for electrochemical biosensors. In: 11th Asian Conference on Chemical Sensors (ACCS2015),
2016 Design and simulation of MEMS helmholtz resonator for acoustic energy harvester. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Design and Simulation of MEMS Hemholtz Resonator for Acoustic Energy Harvester. In: 2016 International Conference on Computer and Communication Engineering (ICCCE),
2016 Queue backlog as a node metric for RPL protocol. In: ICCCE 2016 International Conference on Computer and Communication Engineering 2016,
2016 Radiation characteristics and SEU rates in NEqO environment using SPENVIS. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2015 Fabrication of monolithic wheatstone bridge circuit for piezoresistive microcantilever sensor. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP),
2014 Analysis of electrical responses of MEMS piezoresistive microcantilever. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2014 Human gait recognition: viewing angle effect on normal walking pattern. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2014 Performance analysis of zinc oxide piezoelectric MEMS energy harvester. In: IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE,
2013 Design optimization of MEMS dual-leg shaped piezoresistive microcantilever. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013),
2012 An alternative polymeric protection mask for bulk KOH etching of silicon. In: 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2012 Geometrical characterization of single layer silicon based piezoresistive microcantilever using ANSYS. In: 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012,
2012 Induced mass change technique for glucose detection in microcantilever-based sensors. In: 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012,
2006 An approach to detect QRS complex using backpropagation neural network. In: 7th WSEAS International Conference on Neural Networks,
Monograph

2015 Development of MEMS cantilever-based biosensor. In: ,