Staff Directory


Farah Diana Binti Mohd Daud

Academic Qualification

  • Doctor of Philosophy in Materials and Surface Science - Doctor of Philosophy, Universiti Sains Malaysia (USM)
  • Master of Science (Materials Engineering) - Masters Degree, International Islamic University Malaysia
  • - Bachelor Degree, INTERNATIONAL ISLAMIC UNIVERSITI MALAYSIA (IIUM)

Farah Diana Binti Mohd Daud (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


farah_diana@iium.edu.my
6565


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Interdisplinary Engineering ~ Other Interdisplinary Engineering n.e.c. - BEng


Teaching Responsibilities


CERAMICS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018
CERAMICS AND GLASSES 2018/2019 2017/2018 2016/2017
Ceramics Processing 2021/2022
ELECTROCERAMICS 2023/2024 2022/2023 2021/2022 2020/2021 2017/2018
ENGINEERING MATERIALS 2023/2024
FINAL YEAR PROJECT I 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
FUNDAMENTAL OF MANUFACTURING PROCESSES 2022/2023
Integrated Design Project 2018/2019
MATERIALS ENGINEERING LAB 1 2023/2024 2022/2023 2021/2022
MATERIALS ENGINEERING LAB I 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
MATERIALS ENGINEERING LAB II 2015/2016
MATERIALS LABORATORY I 2016/2017 2015/2016
MATERIALS PROCESSING TECHNOLOGY 2023/2024 2022/2023
MATERIALS SCIENCE AND ENGINEERING 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016


Supervision


Development Of Cement/Rha-Derived Nano-Silica For Co2 Regeneration Capture.
Ph.D In Progress Main Supervisor
Synthesis Of Silica Ceramic Membrane Via Sol-Gel Dip-Coating Method For Removal Of Carbon Dioxide (Co2) From Biogas.
Master Completed 2019 Main Supervisor
Investigation On Non-Structural Approach For Sustainable Flood Disaster Management In Malaysia.
Master In Progress Co-supervisor


Research Projects


Completed
2022 - 2022 'Taman Permainan Hijau Selangor" or "Selangor Green Playground"
2019 - 2023 UNRAVELLING CATALYTIC MECHANISM OF HIGH ENTROPY ALLOYS (HEAs) FOR ENERGY-EFFICIENT AZO DYE REMOVAL IN FENTON REACTION
2019 - 2023 Surface Passivation of Porous NiTi Shape Memory Alloy via Thermal Oxidation for Bone Implant Application
2018 - 2021 Synthesis of hybrid nanosorbent calcium oxide incorporated with magnesium oxide-silica for enhancement CO2 capture performance and cyclic stability
2015 - 2018 Development of Ceramic Membranes from Halal Sources Material for Removal of CO2 from Biogas Plant
On-Going
2022 - Present Filtration Mechanism of Bioactive High Amylose Mangifera Indica Starch/Polycaprolactone Electrospun Nanofibers for Biodegradable Facemask
2019 - Present Regeneration behaviour of nanosilica with concrete waste via natural self-healing route for capturing CO2
2009 - Present Advanced Materials and Surface Engineering (AMSERU)


Publications


Article

2022 High purity nano-silica from rice husk ash (RHA) via chemical methodas additive/stabilizing agent for CO2 capture application. Key Engineering Materials, 908 () pp. 373-378
2022 Porous NiTi shape memory alloy fabricated via powder metallurgy technique using pore forming agent. Key Engineering Materials, 908 () pp. 119-124
2022 Prediction and optimization on tribological behaviour of kenaf/carbon fiber reinforced epoxy matrix hybrid composites. Key Engineering Materials, 908 () pp. 3-8
2022 Size reduction via planetary milling and acid leaching effect on rice husk ash-derived nano-silica. Materials Today Proceeding, 66 () pp. 2786-2790
2021 Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1) pp.
2021 Preparation of CaO-SiO2 adsorbent for potential CO2 capture via dry mixing method. Materials Science Forum, 1025 () pp. 343-348
2020 A comparative study on mechanical properties of carbon and Kenaf composites via vacuum infusion technique. Journal of Engineering Science, 16 (1) pp. 97-107
2020 Characterization of NiTi shape memory alloy sintered at different temperatures in reducing environment. Materials Science Forum, 1010 () pp. 632-637
2020 The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1) pp. 234-244
2018 Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, Special issue () pp. 63-67
2018 Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1) pp. 378-383
2017 Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (Issue 1) pp. 19-24
2017 Physiochemical characterization of Sn-Zn coatings electrodeposited from an acidic chloride bath in the absence of complexing agent. International Journal of Current Science, Engineering & Technology, Original Research Article | Open Access | AMCT 2017 Malaysia | Special Issue, Special issue () pp. 493-498
2017 Synthesis and characterization of silica ceramic membranes via sol-dip coating. Journal of Advanced Research in Materials Science, 39 (1) pp. 1-7
2016 Ca(OH)2 nano-pods: investigation on the effect of solvent ratio on morphology and CO2 adsorption capacity. RSC Advances, 6 (42) pp. 36031-36038
2015 Improved CO2 adsorption capacity and cyclic stability of CaO sorbents incorporated with MgO. New Journal of Chemistry, 40 (1) pp. 231-237
2014 Carbon dioxide capture at various temperatures using Ca(OH)2 sorbent fabricated by sol-gel route in ethanol media. Advanced Materials Research, 1024 () pp. 35-38
2014 Development of Ca(OH)2nanosorbent for intermediate-high temperature CO2 capture via wet chemical route in N,N-Dimethylformamide solvent . Advanced Materials Research , 911 () pp. 410-414
2013 Fabrication of Ca(OH)2 nanostructures by facile solution – based synthesis at various reaction temperatures as CO2 adsorbent. Materials Science Forum, 756 () pp. 175-181
2011 Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application. Malaysian Journal of Microscopy, 7 () pp. 161-169
Conference or Workshop Item

2023 Cement-based with partial replacement of nano-silica for improvement in compressive strength. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2023 Effect of pore forming agent on phase transformation behavior of porous NiTi shape memory alloy. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia,
2023 Enhancement of fenton process using high entropy alloy powder as catalyst. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2023 Tailoring compressive properties of sintered porous NiTi Alloy for biomedical implant through pore forming agent. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023),
2021 Development of High Entropy Alloy (HEA) as catalyst for Azo dye degradation in Fenton process. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021),
2021 Synthesis and characterization of nanoporous biphasic calcium phosphate. In: International Conference on Biomedical Engineering (ICoBE 2021),
2021 Synthesis methods of doped hydroxyapatite: a brief review. In: International Conference on Biomedical Engineering (ICoBE 2021),
2020 Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
2020 Preparation of nanosilica powder using rice husk via precipitation method. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
2019 Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques,
2019 Preparation of nano-silica powder from silica sand via sol-precipitation method. In: "International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018",
2018 Electrodeposition of zinc antimony alloy thermoelectric materials. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017",
2018 Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2016 CTAB-assisted precipitation synthesis of Ca(OH)2 sorbent for CO2 captures. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015,
2016 Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2010 Synthesis of TiO2 nanosized powder photocatalyst via soft-gel method for bacteria inactivation application. In: 19th Scientific Conference of Electron Microscopy Society of Malaysia (EMSM),
Book Section

2020 Two-step synthesis of ca-based MgO hybrid adsorbent for pontential CO2 capturing application. In: Trans Tech Publications Ltd, ISBN: 978-303571664-1, pp. 369-374
Monograph

2020 Synthesis of hybrid nanosorbent CaO incorporated with MgO-SiO2 for enhancement CO2 capture performance and cyclic stability. In: International Islamic University Malaysia,
2018 Development of modified ceramic membranes by silica dip-coating method for removal of co2 from biogas plant. In: ,